BlackBerry Smartphones during the update, phone locked itself.

I have a BB 8310 for my girlfriend. While trying to update to simply sync my music on the phone, I decided to update the phone software that turned into a disaster. Updating, during the screen where it says "DO NOT DISCONNECT", the defective USB cable went out leaving the unfinished phone. Now all phones will Flash with a red light. It does NOT at all. The screen remains black. When its plugged into the computer now, it does not read it's a BlackBerry. He said: "USB device not recognized".

Now, I know that when installing the phone system files where probably deleted. And not replaced. So what now? Is there something I can do to get the phone recognized by my computer? It has been saved until the new facilities took place, but does not help because the computer does not recognize the phone. HELP PLEASE! I would not lose my new BlackBerry before getting really enjoy.

Well, the good news is that I was right. It's "mode of software program. A red light flashes twice every 3 seconds. But I had once the usb stick to the right. I got the phone to download the new software I'm trying to do in the first place. It pays to read everything in Device Manager!

Tags: BlackBerry Smartphones

Similar Questions

  • Problem blackBerry Smartphones during the update of application software

    Hi guys, I'm very new to this bear so please with me I have a little problem, this morning I received a software update notification on my phone, it's the application of security Lookout software.

    I did download the software and be downloaded completely, when asked to restart I said yes.

    Now my phone turns on and it asks me to allow or deny permissions to the application, but for some reason that so that my phone never seems to be frozen, the buttons work but the cursor will not work, I can't do anything even tried to reset the phone but still no help

    everything here got help for me

    Hello

    Thanks for the info, I tried what you suggested, but all in vain, so I had to take the phone my service provider, they said it was a software problem and they had to erase the entire phone, so now I have my phone back but with zero info on it, but Lucky for me, I had done a backup sometime ago

    Thanks again for the help

  • Classic classic BlackBerry frozen during the update and will not turn on or off

    So I was in a wifi zone in a fast food place, and my screen said that I had to update software and because I would be there for some time, I allowed him. He said to date started and then told me that I had to be plugged in for the update, but I didn't have my charger. I don't remember if it continued on its own or if I hit just OK but now it is frozen on the ATT screen and will not shut off/on/restart. If I press and hold the off button, it counts down as if she died but do nothing and I can't use the touch screen to cancel or restart.

    I am very frustrated because I've had problems with this phone since I got less than 2 months ago.

    In addition, he is now connected and still will not do anything else.

  • Hearing of blackBerry Smartphones during the call sound


    If you look in the settings of the phone, I think that there is an option to activate alerts during phone calls.

  • BlackBerry Smartphones continues 'the screen is locked' flashing

    My phone keeps flashing "screen is locked', instead of just stay stationary. This is the second time it happened, the first time, that I know not even how he stopped! Please help... it keeps draining my battery...

    Thank you!

    Have you tried a battery pull?

  • Pictures of the blackBerry Smartphones getting the 9500 phone...

    I have read a few posts on this and it seems a common problem but the solutions don't seem to work for me.

    When I try to get pictures and videos from my phone, none of the programs on my pc can find them or the locations of the files. When I use the plug and play the only folder that appears is the music.  When I check the properties of the images (on the phone) the location of the file indicates that there should be a few extra folders...

    Any help would be appreciated!

    Thank you very much


  • BlackBerry Smartphones during the sync connector specific error

    "Tried to do my normal sync with Outlook on a Monday and all of a sudden I get Intellisync connector specific message ' error '."  It will not sync my Outlook calendar.  Save and others work very well, but no timetable.  Nothing has changed on my laptop since last synchronization successful Friday prior.

    I tried the online resource, but it tells me error associated with Lotus Notes and I have nothing related to Lotus on my laptop and never have.

    Someone else had this problem?

    Thank you.

    Please ignore this announcement.  I did a search in this forum and found the answer.  Should have thought first of all of it.

    Thank you.

  • Smartphones from blackBerry Torch 9800 completely erased during the update

    When I plugged my phone into the computer to charge, an update came on the bb Desktop Manager - to update to 6.0 Bundle 2467 - and I started the update.  After a few minutes, I realized that I have to back up my phone before the update but Office bb wouldn't let me - he said that HE had to be updated.  If the device software update paused until the Office update was complete.  When it was over, the update of the device continued... and I have no back upward.

    Somewhere in the middle of the update (after about half an hour) the phone blinked, there was funny "beep" and a message came that the update could not continue.  The phone has rebooted, but was stuck at about 65%.   I let it sit for a few minutes, still doesn't move do not.  Pulled the battery, let stand a few minutes like that and then reintegrated.  Began to restart, then won again at the same place.  Taken from the battery after a few more minutes and wait for about 15 minutes.

    When I put the battery back, the phone quickly started completely... but because the updater won Mid-implementation to date ALL is lost! Contacts, calendar, memos.

    Is it possible to recover whatever it is? Or all my data lost somewhere in cyberspace is?

    * There is a small file, about 5 MB called Contacts Blackberry so I thought I could synchronize the files from there, but I don't know how!

    Can anyone help?  Really aggravated in this topic...

    Hello and welcome to the community!

    First of all, we will be sure your BB works correctly and with the proper operating system. Is it? What you have said, I can't say for sure. If it does not work, then you can reload your new OS itself, just to be sure. Don't worry about all the data on your BB... he already went there now (based on what you said).

    For your data, Desktop software must have made a backup during the update process... sometimes, we offer the chance to overcome that... I hope that you do not have. In any case search your computer for files with the extension of the IPD or BBB (depending on the version of the Desktop software you use)... These are the files that would have been created on your computer when the update process performed the backup. Look at the time, the files were created... created around the time you were doing the update are candidates to perform a restore of your BB.

    Otherwise, if you had made use of yourself of the free app of the BB Protect your data are indeed "in the clouds" available for to restore you.

    In addition, if you use a Desktop Organizer (for example, Outlook), which must contain your data.

    In addition, if you have none of these, then you have indeed now met data loss, which is sad indeed.

    Good luck!

  • BlackBerry smartphones HELP! Torch 9810 froze during the update

    Help please.

    My blackberry froze during the backup process in the software update.

    It is taped to 19% for the last 2.5 hours.

    Please someone help!

    Thank you!

    He finally finished loading after 10 grueling hours!

  • Get-9860 torch blackBerry Smartphones stuck during the update

    Hello

    I bought a new unit of bb now I'm updating everything and he's stuck during the update wat to do?

    Following currently being held in the screen for half an hour now

    Now it finally works

    glad to see that it works for you

  • BlackBerry Smartphones don't update OS Bundle 1647 7.1 7.1 Bundle 2102 on Curve 9360, asking to check the connection to the network. Solved

    The update stops after the backup is complete. My connection is smooth, broad-band.  I also downloaded the link of direct update from Vodafone Australia http://au.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html

    I had the same problem earlier during the updating of the OS6 OS7 to, at the time ' it allows to stop the backup mid. I have blacberry Canada assistance to do, but I forgot the procedure.

    I almost tried everything but a hard reset, which I don't want. The update appears on BB dev Mgr not on the handset.

    I finally got to work without calling Blackberry, with a little help from here.         http://forums.CrackBerry.com/BlackBerry-Curve-9370-9360-9350-f237/how-upgrade-OS-7-1-curve-9360-a-73...

    I have not followed all the instructions, however. I have dd was as follows:

    1 remove all software RIM of program and features.

    2 remove all traces of remaining RIM program files.

    3 reboot the device.

    4. install the handset and service provider of installation I got: http://au.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html

    And it was there, all done.

  • accidentally turned off during the update of windows

    Guys, im using sony vaio with vista premium OS and it is automatically updated, I had used to remove my battery for use at home, during the update of windows, I accidentally kick off the power cord and it disconnected from the main power switch and turned off, when I open it I saw a note on the bottom right 'tm this copy of windows vista is not authentic.

    someone could help me on this guys, how can I do recover without reformatting my laptop.

    Please help me guys...

    Thanks in advance...

    Needless to say, cutting the current during the update process can cause all sorts of problems - many not even related to the update itself.  It is a common branching.

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  I don't know if this will solve the problem, but it might.  It's worth a try (and it can be useful if there are other problems that you have not yet detected).  Whether or not it works, you will need to re - install the update (and this time won't turn off - LOL).

    If you still have the problem of validation after system restore, and then click Start / computer / system properties and check the bottom of the Activation section.  Your system always shows that it is enabled?  If this isn't the case, then reactivate.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

    If this does not resolve the "not genuine" message, please post your problem in the Windows Genuine Advantage Forum: http://social.microsoft.com/Forums/en-US/genuinevista/threads , where the experts on this kind of problem will be more than happy to help you with your problem.  They will probably ask you to run a program and download the results so they can examine in order to find the problem - just follow their instructions.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • BlackBerry smartphones can not update AppWorld 907 invalid COD

    Hi guys. I bought my Torch 9800 (v6.0.0.570) in 2011 and so far the problem is still not resolved. Everytime I open the AppWorld

    -A message appears: "To continue to use Blackberry App World, you must upgrade your current version."

    - Then I download the update.

    Whenever the 99% achieved download bar, suddenly a message appears "907 invalid COD".

    I can't even delete my BB AppWorld. There is no option "Delete" in "Application Management" or "Modules".

    Hi Firdaus92

    In this case, it is advisable to upgrade the version of your operating system to the v6.0.0.756

    Search and download your OS and everything above applies

    By sdgardne 

     

    However, here's what I propose...

    The easiest way is, on a PC (you can not do on MAC):

    (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. (It's probably debatable given the errors you have... it is likely that your data are already parts of your device, which means that you must now rely on a backup you took before that happened.)

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry smartphones can not update bb id

    Hello

    I have a situation, I can't update my bb on my phone id (8520) I bought this phone to another user and its information is always that that checks the phone. I get an error message: enter the username associated with this smartphone. I think that's also why I can't receive and accept the invitations when friends add my PIN for BBM. I have not yet set up my email accounts, when I get to the email Setup page I get this error message: your e-mail account is already enabled for use of the company, but I'm not not using any email the company and I did the putting up of my email on my old bb 9000 before. pls help me on this, I know not what to do. I already have my BIS active but im getting this kind of errors... you can email me for any possible assistance, here is my email address:

    Thank you and hope to receive a feedback with you!

    EDIT: For your security, personal information such as email are prohibited. Please see the guidelines of the user   under article ""be sure to." "

    Hello and welcome to the community!

    Time to take a step back:

    • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

    The seller must complete their first steps before you try to use anything.

    Good luck!

  • Bugs blackBerry smartphones? the 9810 torch?

    Hello

    I've been playing with my new torch 9810 and now the battery seems to be draining like crazy (up to 10% after having just three hours hanging out, not a single call done) - and some programs play AND I get a message indicating that the camera photo and video camera are in use although I'm not using the.

    Is there a virus on this thingy? -How do I know? has someone hijacked my camera to spy on me?

    a little paranoid, hoping for help!

    Thank you

    Hello and welcome to the community!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

Maybe you are looking for