BlackBerry Z10 wifi

Similar Questions

• BlackBerry Z10 Wifi disconnection and deactivation

  Topic: Drops wireless connection and disables wifi radio on TP-LINK router 470N (single band - 2.4 GHz) (Home connect)

  Hello

  I'm Jay payen

  Recently, I have owned BlackBerry z10 and have the latest firmware upgrade version: 10.2.1.2102 updated.

  I am Using Wi - fi Connection to connect the app on my phone, but since I started to use BlackBerry z10 he constantly sinks in connection with home wifi router in addition it also disables wifi radio so that even make any another device branch ed on this router disconnected to the router. Solution is to this problem is that I have to restart my router every time.

  I tried to change due to changes in my router:

  • Mode: since 11bgn mixed with 11n only
  • Enabled SSID Broadcast
  • Wireless security: of WAP-WAP2-staff staff
  • Beacon interval: 100 to 50
  • RTS amplifiers: Of 2346 to 2304

  I am friends here from my phone to the router address reservation.

  Note: My router has the latest Firmware Version: 3.16.6 build 130529 Rel.47286n (v4.0000 H/W Version WR740)

  I use Sony Xperia Acros, HP ProBook 4440 s, Sony Vaio portable Devices in parallel, or any hour would not be problem with connection of abandonment until.

  So, please help me about this situation.

  Modification of the Ant / changes / suggestions are welcome.

  My router configuration:

  • Wireless Radio: turn on
  • Name (SSID): XXXXXXXXX
  • Channel: Auto (canal 11)
  • Mode: only 11n
  • Channel width: 20 MHz
  • MAC address: XX-XX-XX-XX-XX-XX
  • WDS status: disable
  • Beacon interval: 50
  • RTS threshold: 2304
  • Fragmentation threshold: 2346 (fixed)
  • DTIM interval: 1
  • WMM enabled
  • Persons with disabilities in isolation AP

  WAN connection type: PPPoE (AutoConnect)

  Phone settings:

  • Enable connections
  • Hidden off SSID
  • WPA/WPA-personal security type
  • VPN profile
  • Type of band 2.4 GHz
  • Auto obtain IP - on
  • Using Auto-IP - verified
  • IPv6 disabled
  • Proxy disabled
  • Access point inter Handover - on

  Please help me get rid of this situation.

  Thanking you.

  Good day

  Greetings - Jay payen

  Hello!

  Try turning off WMM, it should help you

• BlackBerry Z10 WIFI limited notifications

  I have a Z10 with ATT 1.0.2074 running. The problem I describe happened before the last OS update.

  Home - when my z10 connects to my wifi - it shows connected, but I get a notification that the wifi is limited and I should connect another source. The wifi icon doesn't show in the bar at the top but ATT LTE, the BB logo and the bars are there.

  I have tried a reboot Z10, restarted the router - changed batteries - have run out of options.

  I run a web server from my home, so the router works fine and if I have a wireless connection to my laptop or tablet, fine. I do not understand the notification "limited." The full message says "wifi access is limited. Some websites are not accessible... etc >

  Edit: it doesn't with my wifi to work.

  Any thoughts?

  Thank you

  VIC

  I guess if you look at the IP address on your Blackberry when on your WiFi at home, you will see something like:

  169.X.X.X, which means that it does not get assigned an IP address from your router.  A simple solution would be to assign a static IP address in the WiFi settings on your Blackberry to your home network.

  The other reported similar problems with some routers.

• BlackBerry Z10 Wifi not reconnect

  Hello

  2 Z10s (10.1.0.4181 - 10.1.0.4633) at different locations with Fritz 2! box 7390 on 5 GHz with firmware 5.50. A long time, then maybe 2-3 weeks there's problems begins. Tablets are not affected, so I guess that its Z10s of our fault.

  WiFi works, so I leave the location. After his return, the connection doesn't get restored. No network WiFi shown, turn on and off Alternatively WiFi on the phone will make me reconnected but I don't think that manual intervention is a solution. Any ideas what going on?

  Problem solved. Do not know how.

  Did an updated version 6.0 on AVM-roads. Major update on the Z10s conducted shortly after his works again.

• Lost blackBerry Z10 phone

  Magalie

  Today, I have a bad day. I lost all the money this month (I'm a student), and the worst is that I lost my blackberry z10 . When I knew I lost it, I was very angry.although it is an old phone, I purchase form someone else, but with me, it's a treasure and a friend. I'm going to protect.blackberry.com, then replace 'Flag as stolen', because I want the thief have only a brick. but now I think that if the thief do not turn the data or does not connect with a wifi then sell it to another people. It is verry bad for them. They lose money from verry for a brick. (I live in vietnam, security is not high, I don't want to aggravate some for someone, but I don't want someone not know my data on my phone, I install 10.3.2, I don't know what happens to my data on my SD card, I want to, it can be earsed).
  You can check what is happening with my data, as it can be not to connect to the internet.
  Thank you verry much!

  Oh sorry for your loss!

  thanhzen2009 wrote:

  but I don't want someone not know my data on my phone, I install 10.3.2, I don't know what happens to my data on my SD card, I want to, it can be earsed).

  Your inserted SD card is not affected by Protect or whatever it is. To protect your card data SD Media you would have needed to have the encryption on the card.

  thanhzen2009 wrote:

  You can check what is happening with my data, as it can be not to connect to the internet.

  No, you can't.

• BlackBerry Z10 a Z10 works fine, the other one has trouble connecting to the mobile network

  Hi, my wife and I have the Z10, and we're both on the same mobile network (Wind Mobile to the Canada). Z10 wife seems to have no problem connecting or staying connected to Wind Mobile. Mine on the other hand seems to randomly drop the connection, or struggled to get connection and sometimes ends homelessness.

  The only difference between the two of the Z10 is its is purchased through Wind Mobile itself, it is locked to their network at the moment. I bought mine a little later and I bought mine directly via the webshop of Blackberry, and it's why, mine is unlocked. What I have to do sometimes is to disable the mobile connection and turn it back on and it works after I do this. However, it is annoying, as I would rather automatically retry the network connection so that it is not go roaming in my own city.

  It is possible that a new sim card can help. Worth a try. I'm guessing, however, that, since one is that she has the ability to see other networks when the locked is not unlocked.

  That said, I use a unlocked Z30 and don't have these problems. Try a new sim card and see what happens.

• BlackBerry Z10 (Z10) how to disable the synchronization of emails?

  Hello

  I currently have a Blackberry Z10, and I wonder if it is possible to disable the synchronization of e-mails, without breaking the connection of data.

  I already tried to manually synchronize emails, but this solution is not to me... emails continue to download automatically.

  Can anyone suggest a fix for this problem? Any help will be appreciated.

  Thank you

  The method will depend on the type of e-mail account you use.  If you use Outlook.com (or Hotmail, Live.com) email ActiveSync, you can go to settings > accounts > select the e-mail account.  Scroll down and toggle "Sync Email" to off.

  Email IMAP (such as Gmail, it is a little different.  It is not a power switch.  If you don't want to switch to manual, you can change the password of account - which would be "unsync" your e-mail of the device.

  For two of them, you would essentially be re-sync all e-mail when you re-connected and incurring data charges.  If you want to do, I'd be on WiFi when the re-login.

• BlackBerry Z10 video BBM for unlimited plans, AT & T

  I'm sure that this topic is here somewhere, but I can't seem to find it. (Please direct me there, if so)

  So, it doesn't seem to be consensus on who this works for and who is not as shown here:

  http://forums.CrackBerry.com/BlackBerry-Z10-F254/t-blocking-BBM-video-voice-over-mobile-networks-905...

  But here's my question. I have an unlimited plan excluded on AT & T.  But I can not activate video calls through BBM surveys. It works fine on WiFi but not on the network. If I try, I get a message that reads "contact AT & T to activate. And, on the settings tab in BBM, the cursor "Allow calls from BBM on Mobile Networks" is grey.

  Thus, after contacting AT & T, they told me similar things to what is mentioned in the announcement of Crackberry - that I have a tiered plan or shared use Videotelephony.  My questions are the following:

  -is that someone here with an unlimited plan from AT & T be able to use video calls when not on WiFi?

  -does anyone know IF you use file manager or something sideloaded it you to get around the restriction?

  -are there someone who has an unlimited plan with AT & T AND has updated for Mac OS 10.2 with Knowyou or something, which is able to use the BBM video on the network? (EDIT: changed 10.3 to 10.2)

  Well, well, well. Just as I was trying to tell the idiots with AT & T technical support I talked with, before the problem was with them all along - not with my plan.

  So, if someone follows this and wants to update...

  Short version:

  If you have an unlimited plan AT & T LTE for your BlackBerry, you can ABSOLUTELY activate BBM video. I do now. If AT & T tech tells you different, they're wrong.

  Full article:

  I have an unlimited plan, my wife has a tiered data plan. Video BBM worked well on both our WiFi phones, his BBM video would work on network, but mine wouldn't.

  I started in my retail store, and the guy who usually helps me didn't know what I was doing wrong. So, we called technical support. AT & T first told me they didn't know why it wasn't, given to me to try different things, power off / on, without success.  So they sent me to the BlackBerry support.  After a few long conversations, which essentially ended with "Yes, this is not our problem, which is AT & T business."

  So, I called AT & T tech support again. They told me on the phone that I can't use this feature with unlimited and should be changed to a share of mobile or tiered data plan. I said, 'nope' and decided to cool it down and try again later.  So, then, I had an online chat with a representative of the AT & T technical support who told me the same thing. She said that the BBM video wouldn't work on unlimited and I needed to change. I told her firmly that I change my plan and my initial agreement for the unlimited understand not having the features are disabled. She told me that AT & T had the right to control their network, but that they wanted. (nice) So, I finished this cat.

  After doing some web browsing, to post here and other forums, with all sorts of mixed responses, I came across this article by the yard by Adi Robertson http://www.theverge.com/2013/5/20/4348672/att-will-allow-all-video-chat-apps-on-its-network-by-end-o...

  On a whim, I sent him, and he wrote, "Yes, uh not.» AT & T has not activated it for BlackBerry on unlimited plans. "She contacted back, then contacted his connection to AT & t. yesterday, I heard from someone at the Office AT & T President, whatever it is. Fast forward... your da! Suddenly, a technical support could enable this feature after all.

  I still have my unlimited plan and video BBM works simply great.

  Now, if only I could get AT & T for Mac OS 10.2 version...

• BlackBerry Z10 controls BBM messaging question Questons?

  I use voice control on my BlackBerry Z10 to try and send a BBM message to my wife on his BlackBerry Curve 9320. I added him as a BBM contact. But the voice command tells me that his name is not a BBM Contact when I use it. So I'm not able to do.
  I used the voice command to send SMS text message and dial his number and his mail without problem. Is there a compatibility issue? Can I use BBM without voice command to send a message, but also to voice chat.
  10 blackBerry OS 10.0.10.85
  Virgin Mobile Canada in Ontario
  Your help is greatly appreciated thank you.

  BlackBerry link to restore and update my BlackBerry Z10. Works fine now!

• BlackBerry Z10 Help! OS 10.3.3.746

  best regards, I have a problem and you install a beta on my blackberry z10 stl100-2 and now I can not degrade the official version
  

  Do you mean that you have installed the beta on our device?  Let's be clear, the BlackBerry does not have beta versions of developer to the user.  You have installed.

  You will have to wait until the official release.  Everything I read, you cannot downgrade to an official release.

• BlackBerry Z10 antivirus

  a good free antivirus is available for blackberry z10

  You'll have to sideload if from here.

  Here is an Antivirus on the BlackBerry App World, but it's not free.

• BlackBerry Z10 Default earpiece/Headset Bluetooth / output Audio Plug

  During the drive, I have a kit hands free bluetooth (speaker jabra) and I have the audio output taken mini plugged into my car for audio (stereo / music).

  During audio playback to my car, it uses the audio Jack very well, the problem is when I receive a call, I want to use the bluetooth headset device instead.

  Now when I receive a call, the audio of the call is routed to the mini taken and I have to manually select the helmet after answering the call which is a pain in the...

  Is there a way to set the default device for different outputs.

  for example

  Use the mini as the audio device output by default when the music plays.

  When I get a call, use the headset as default device bluetooth for phone calls.

  When I hang up, swinging back to the mini taken (because it is the default device for audio)

  In addition,

  I ordered the bridge thinking music that he could solve my problem.

  Will I have the same problem with it when 2 bluetooth devices are connected? for example, the audio gateway and my bluetooth headset.

  Should be able to assign the bluetooth services specific to the results of the default value.

  for example Audio > mini plug if it is present as a default value if no, he can use bluetooth

  Calls > bluetooth headset.

  Hope that makes sense.

  Dave

  The Blackberry music gateway solves this problem (kind of) works better... when the two jabra or any other headset device is connected and the music gateway is connected it muffles call correctly and works correctly...

  The new problem is introduced only if you have a headset (bluetooth or hands-free headset) that also supports music services. (The two compete to connect to theses services)

  I suggest buying a hands-free device that does not support music services (only a helmet) and then you should not meet for the problem below

  Read this new thread to see the solution to this new problem, if it still exists.

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Bluetooth-services-and-BB-music-gateway-enable...

• BlackBerry Z10 is stuck inside the camera!

  On the z10 blackberry, sometimes you can't get out the camera... for some reason any the shot does not do anything and you're stuck out there. The only way out is by clicking on the photo album and then get out of there!

  BlackBerry z10 is full of bugs!

  Hey everybody. We will all stay on the topic and helps answer that the question has been addressed initially. Thank you! ~

• Reloading the blackBerry Z10 Z10 software stuck on logo Blackberry, continuous restart loop, did not help...

  Hello

  Here to find the solution for my beloved BlackBerry Z10 STL100-3

  One day, precisely 26 May 2016 my Z10 battery Blackberry went below 5% or something, I rushed to connect it to the charger but before doing so; It is just off. I plugged in the charger for several hours, but it went to reboot mode as he went to the course passed. It just kept flashing empty battery symbol.

  Problem: BlackBerry Z30 stuck in a reboot loop

  Comments/Details:

  1. when it is connected to the wall charger, the red LED flashes for a few seconds, the display shows "BlackBerry" name. After that,.

  a. device either goes to a restart mode, the icon reload Blackberry OS, the charging progress are shown and about 60-70% progresses he new go to the mode (flashing empty charging symbol) load

  b. or device is standing right in the mode, load with screen showing beteer empty, load, seeing to the top flashes still with the typical color of LED for empty-drained/low battery levels.

  2. keep on charging for several hours, or even overnight will not help to restart. And he remains in charge mode with b symptoms of "scenario". Start button / stop fails to start the machine and after several attempts, it flashes only 'Blackberry' on screen and again charge mode.

  3. as soon as the connection to BlackBerry device link gets detected for a few seconds. And the screen displays the name of "Blackberry", "scenario one" described above occurs. And he just repeats.

  4. that the device is detected for a few seconds, being fast enough to select the option "Reload" when Blackberry link shows that it connected returns with the message "software update has encountered an error.

  After meeting thiis reboot loops question on 26 May 2016, I searched rigorously blackbery support forums and other web pages a di a factory reset/software reload on my device. I lost all my data, but did not care as I wanted my Z10 back to life.

  Now its been 2-3 months I see my Z10 stuck in restart loop and hoping that maybe it lights up or I will be able to find the solution.

  Kindly help.

  Hi J Sanders,

  Z10 was connected to the wall charger and all the tips/advice you mentioned have been tried. He could not start device.

  Before trying the ADF, to check if battery is dead or defective; I kept it in my brother Z10. The battery was load and after a while, he turn the unit on its own.

  However, the pile of work of Z10 my brother could not initialize my camera. I guessed corrupted software connection or the battery could be a problem.

  I carefully observed battery connection ports, specifically the part that establishes the conncetion of metal tabs of the battery with the unit (given in the image http://www.gsmzone.co.uk/Blackberry-8900-Z10-Battery-Connector).

  I found one of the metal connector stuck / out partially / fits loosely / spring-movement irregulars / and is not able to communicate perfectly with the metal strips of the battery.

  I tried to solve this problem by manually removing the metal connector. After several test, I managed to do it.

  I put my battery in my Z10, he acknowledged, and red LED flashed, name BlackBerry flashed, Blakberry OS Reload icon flashed-has increased 100%, Blackberry 10 name flashed and Z10 began. Device came to operational status.

  Current operating system version is 10.3.2.2836.

  No SIM or media inserted in it.

  Charge the unit and check if all functions work fine.

• BlackBerry, BLACKBERRY Z10 Z10 Os Downgrade

  Hello

  my name is Ghislain

  I m from Pakistan. I m using Blackberry z10 stl100-2 last night I reset my mobile but my mobile is not on and just the red light flashes, then I try to link blackberry but no installed os not on software update so I'm looking App Autoloader Blackberry os 10.3 and install on my mobile now my phone works, but some applications like photos video, video clip and some applications do not work properly I want to just install my previous OS 10.2 on my mobile please help me for this

  Thanks in advance

  Unfortunately, ignoring all warnings with that you should have to be made, you have now activated your device in a developer test device. There is no intended for general purpose OS 10.3.3. 10.3.3 OS out there only are strictly for the application development process, and they are severely constrained in their functionality. It is an intentional situation, hamper the OS for the developer of the app to specifically test some things. That's why these OS developer packages are never intended to be installed at someones "daily driver".

  In addition, the 10.3.3 Developer OS includes a similar restriction 10.3.2. a... Once you move to the 10.3.3 level, you cannot fall back to previous levels or 10.3.2. It is blocked, just like 10.3.2 is blocked to prevent falling back to 10.3.1 or an earlier version.

  You're now stuck on 10.3.3 while BB released a production version of the OS 10.3.3. There is no way around that. The only thing you can do is try to make the OS as functional as you can through these tips:

  • http://forums.CrackBerry.com/BlackBerry-10-OS-f269/well-apparently-i-made-mistake-updating-10-3-3-WH...

  It will not be perfect, and it won't be complete. Some things may work for you, and others could not. But it is not what it will be until BB releases a bunch of OS 10.3.3 production.