Blackbird 002 RAM

Similar Questions

• HP Blackbird 002 gaming system restart problem

  Product name: HP Blackbird 002 LCi

  Backbround: Fantastic machine and very expensive.  When I bought it, I learned by HP that there technical support (not necessarily free) for life as long as HP was in business.  Apparently is no longer supported by three HP tech, Shsma, Mankish and Ajfhat.  So here I am.  I upgraded hard drives and the operating system, Vista Ultimate original, Windows 7, Windows 8 over the years.  Works like a charm.

  Problem: I had this problem with the three operating systems.  Whenever there is a power failure or I shut down the computer, the led lights in the case flashes constantly and I'm unable to turn it back on by pressing the power button.  I have to unplug the computer, wait a few moments, plug it back, then press the power button.  Then and then only, not this kick in and start.  Is it the power supply?  Is it the motherboard?  Or is it something more simple, like the battery on the motherboard?

  In addition, the front of the box has two buttons.  The left is the symbol of power.  The right one has a circle with a triangle inside the symbol.  If it's the power supply can someone direct me to where I can buy it?

  Thank you!

  Thank you Dean.  I did what you suggest already, several times, but always the MB connection didn't feed fans.  So, I plugged the CPU fans directly to the PSU.  Also, I went to the bios and removed warning if the CPU fan fail.  The system is currently working as if it was brand new.  I will continue to work on the CPU to connect fans directly at the Mo because that's the way it suppose to be.  Thanks again for taking the time to answer.

• Help! Blackbird 002 - 01b makes horrible noise when starting

  I have a Blackbird 002-01 b with a card mother eVGA 780i NV. When I flip the switch on "on" at the back of the power supply, LED MB internal lights up, but nothing on the front. It will not be powered by the power button, but I have to use the power button on the motherboard. As it starts, there is a strong ongoing high tone that does not stop.

  Any ideas?

  Thank you!

  id355

  Hi id355, glad to hear you are making progress. You can check the cables on the HDD and the DVD player. Make sure that the hard drive is connected to the first port on the motherboard sata and DVD player is connected to the second track, if these are the only drives in your system.

  You must then enter the BIOS and make sure the first boot device is the DVD player and the second boot device is the SATA hard drive...

  If the operating system is installed on the SATA hard drive and it is intact and non-corrupt, and there is no CD or DVD disc in the optical drive, the system should start on the hard disk and the desktop computer.

  I hope this helps.

• Wiring and test of the Blackbird 002 video card fan

  I have a Blackbird 002 I bought directly from J & R.  Intel processor (i5 or i7), Vista 64-bit, dual NVIDIA 9800 GT cards.

  It is a great machine for a few years, but after several sessions with torches recent I recently that I booted up and it entered into VGA mode with an error «could not load graphic drivers» Windows

  I tried a clean install of NVIDIA driver but the same result on reboot; Mode VGA and no NVIDIA display options.

  I think one of the 9800 GT cards is dead.  So I opened the case and noticed the top, main card has been connected to both the power supply and a smaller type of connection, 2 white square pins.  I deleted the SLI connector and the power of these two cards, one of them removed from their slots and put the card back in top housing of the SLI.  I started upward and the machine starts normally - no error only VGA, NVIDIA Control Panel with no SLI option (as expected b/c that the 'bad' card remained uninstalled).

  Unfortunately with the single card installed the fan runs constantly and the card works extremely hot.  This happens without any games or from any application - simply slowed down, the fans run constantly and loudly.

  So I have two questions:

  (1) how determine if one of the fans in the case does not work properly?  I think this may have caused the first card to die and can be the cause of the card to run hot.  Looking for a way to review all case fans, check each working properly and troubleshoot as needed.

  (2) what is the additional connector to the first graphics card - connector 2 pin white square, and how to disconnect?  I have been unable to pull the connector of the card first, so it remains plugged in despite the fact that the card remains out of the slot.  I see a connection open white, small square on the map left, but I am unable to disconnect the dead card.  I think that it may also have something to do with the remaining card run hot, because it can be a power supply fan, that I am not aware.

  I simply into a new map (thinking that the GeForce GTX 570) but I'm afraid that she also only will burn quickly if a case fan is dead or if the connection of the second, smaller remains plugged into dead cards.

  Any feedback is very appreciated.

  two drivers of white pine is for sound hdmi so it is not necessary to be connected and can only be removed the pins on the map. 9800 gt cards run hot and the fan is cheesy on them. eVga precision tool allows you to monitor the time of the video card and adjust the fan speed. It is unlikely that one of the three fans died, but it's pretty easy to check the two top fans of the page and see if they are rotating. the third fan is left of the hard drives, so you'll have to see if this one works by removing some of the hard drive platters and watch. It feeds of cold air in the compartment of vga. You can also check the fan speed in the bios. I'd be surprised if you have a bad case fan. Here are the specs for the fans of the plant:

  Back to top

  Delta AFB1212LE - Ball fan DC 12V 0.14 has 1.68W 2000 RPM 71,27 CFM 32.5dB

  Hard drive Bay

  Delta AFB1212L - CFM: 62,93 noise: 32.5db

• HP Blackbird 002 IDE Slim Slot readers upgrade options!

  I would like to know if anyone out there has been able to upgrade their thin slot HP Blackbird IDE drive? I would switch to all SATA, but am still haunted by the disk hard slim slot classic IDE to date. Is there something out there that can replace the drive? What are the options I have to go ahead with the upgrade. Thank you! In addition, during that I am there has been more recent firmware updates released for this IDE drive?

  

  I simply a direction on where to find the adapter pieces (cage) slim drive so I can actually add a second drive slim - the spare wheel does not have an eject button relocation/bar and I need also the face plate of a car and the rear adapter circuit exclusive to the drive of the op.

  WORK for the initial question, however.

• HP Blackbird 002-01 b LED wiring

  There are a few wires inside the chassis which look like they are going to LED lighting (they are black and white). There is one single white male connector with a female hooked up with graphics that say "PWR SW + /" there are a few other loose females black connectors hanging graphics saying unrelated "HDD LED + / ', ' RES SW + / ', ' PWR LED +", "PWR LED -" and a white connector. Should be plugged in anywhere?

  Under the access panel right side to the top of the chassis, there are Board of directors where there is a similar connector plugged. A connector is plugged into a connector pins 2 and below is another 2 pins disconnected.

  Any help or wiring connections photos would be appreciated.

  Thank you!

  id355 wrote: there are a few wires inside the chassis which look like they are going to LED lighting (they are black and white). There is one single white male connector with a female hooked up with graphics that say "PWR SW + /" there are a few other loose females black connectors hanging graphics saying unrelated "HDD LED + / ', ' RES SW + / ', ' PWR LED +", "PWR LED -" and a white connector. Should be plugged in anywhere?

  Hello id355, the son you mention are normally connected to the motherboard in the lower right of the motherboard. You should find the very small pins sticking up from the motherboard with the appropriate labels on the motherboard for each pin.

  These are that the motherboard and, therefore before control cables, control system.

  The led "disk" is the connector for the activity of the hard drive Led on the front of the case.

  The "RES" SW is the connector for the reset button located on the front of the case.

  The "PWR" led is the connector for the power on led on the front of the case.

  The largest other connector is usually the speaker connector. She usually can accept up to four sons, but most often only has two, the ends of the connector.

  The label "+/-" indicates the polarity connectors. Since the connectors can be inserted in the pins on the motherboard or orientation, if they are connected with the incorrect polarity, the LED will not turn on.

  Even if the polarity is connected incorrectly, the power switch and the reset will work. If the HDD and PWR connectors are defined in the inversion of polarity, just turn the connectors around 180 degrees and they light up should work.

  I have to admit that I don't know where not able to find an example of the motherboard of your system, but here is a link to a motherboard that has been reported as being installed in your model .

  You can see the small blue, red, orange connectors on this forum in the very low to the left of the screen.

  As I mentioned earlier, since I am not familiar with your system, I can't verify that this information is correct, however, if your system has a standard motherboard, and that these cables are not connected correctly, the system does not boot.

  Sorry to be so long and hope this helps.

• Will be a pci express 3.0 video card work in my pc with pci express x 16?

  I have a HP Blackbird 002-01 a PC and want to install a video card Nvidia 680 due 1500 cuda GPUS.  Will be the new Nvidia card with a pci express 3.0 design work of bus in my pc with a PCI express x 16 bus?

  Thanks for the info.

  The way I see it is, if I can expect an effect of butterfly-back similar performance for graphics speed, that shouldn't be a problem.  The main reason I am looking at the 680 gtx is due to the 1500 cuda GPU.  I use the Blender 3d graphics program that has the new rendering of engine Cycles that can use the cuda GPU for faster processing.  My current Nvidia gtx 260 has only 200 GPU, for most large number in the 680 should provide a significant increase in render speed.

  Thanks again for you help.

• NB200-002: unable to use 2 GB of RAM!

  I have a NB200-002 (PLL20C) and can't seem to get my system to recognize any more than 1 GB RAM stick.

  The Toshiba Canada plug, it is said that the maximum RAM for this netbook is 1 GB, but that I don't understand, is that it seems that all the other versions of non-Canadian of this netbook can accept up to 2 GB of RAM. I'm just completely out of luck here just because I bought my netbook to the Canada!

  I tried to install a spare 2 GB PC2 - 5300 (from Patriot Memory) stick, I had, but the BIOS and Winver both just end by saying that I have 1 GB installed.

  Another point interesting is the fact that my netbook comes with a chip of PC2-6400 when the specs say it works on a 5300. Now, I understand that these chips are retro-compatible but I would have more chance if I bought a 2 GB 6400 key? I know this probably won't make any difference, but I'm hoping against hope in desperation...

  Any help would be greatly appreciated.

  I would try another stick of RAM. I have the American model, purchased at Best Buy and it came with PC2-6400 and I swapped the 1 GB and put a 2 GB PC2 - 6400 in without problem.

  Now, I guess it's possible that Toshiba CA has done something for the BIOS so the Max is 1 GB of RAM, but I doubt...

  Jeff

• Cannot allocate 0.002 MB memory... I have 32 GB of RAM

  Hi all

  I've upgraded to the new version of After Effects 11/30 and I always get this message:

  Cannot allocate 0.002 MB memory reduce memory for rendering of this framework requirements, or install more RAM. (12803 3D camera data / standard). For more information, see www.adobe.com/go/learn_ae_mem (5027: 3)

  When I purge the cache of the memory and the disk is not much except change the error to a (0: 39) or (7: 5)

  I went to the quarter to frame (10 x 15) custom resolution...

  I have 32 GB of RAM and After Effects use 20-29 gb as seen on my application for management tasks on El Capitan.

  It was produced after about 30 minutes of use with no problems. So if I saw my composition I get all these error messages continue to appear after I press ok making it difficult to work on my project. Finally, I restart my computer that solves the problem for 15-20 minutes until I need to redo a reboot.

  For now, the only solution I've come across uses an older version of AE. It bothers me that this happens to the newest version that I prefer to work with an adverse event to date...

  Best,

  Danny

  What is the exact version of 2015 for CC number that you use? There is a big difference in performance between 13.5.0 and 13.7.2!

  How you establish previews? You have the cache before reading to checked in your preview? What are the parameters of your memory?

  What version do you use that works correctly? (Full version number to please.)

• HP 360 m1-u001dx 11.6 "x: upgrade of RAM HP Pavilion x 360 m1-u001dx

  I'm looking for detailed instructions on how to upgrade the RAM in the m1-u001dx 11.6 "notebook.  I put the hard drive to a SSD variety, but I have not found the memory stick upgrade the RAM.

  The Web site and the following video was useful for an overview, but it seems to be a different configuration for laptop: http://support.hp.com/us-en/document/c04179226

  Hello

  The manual says

  Twin DDR4-2133 memory media
  Supports up to 16 GB maximum on - board of system memory

  Twin DDR4-2133 memory support

  ● 16384 MB (8192 MB × 2 pieces)

  ● 12288 MB (8192 MB + 4096 MB)

  ● 8192 MB (4096 MB × 2 pieces)

  ● 8192 MB (8192 MB × 1)

  ● 6144 MB (2048 MB + 4096 MB)

  ● 4096 MB (4096 MB × 1)

  This means no slots for you to add. Your machine is 001, 002 to 099 a few other machines can have full edge 16 GB

  Kind regards.

• Models NB200 / Ram upgrades

  Hi, I'm planning to buy my netbook this Saturday and I found a couple of different models. There are the NB200 - 00P and the NB200-002. What are the differences between these two? Also, I do intend to upgrade my ram to 2 GB, is it possible with the NB200?

  Thank you

  Hello

  The color of the NB200-002 seems to be Brown satin and the NB200 - 00P seems to be white satin

  http://www.Toshiba.ca/Web/product.GRP?LG=en§ion=1&Group=1&product=9350&p art = 9491

  Two are supported the same processor, the same HARD drive, the same operating system, the same RAM.
  It's just a different color.

  And Yes, it should be possible to upgrade the RAM to 2 GB

• HP G62 100SL: HP G62 100SL ram Upgrade problem

  Hello

  I wanted to upgrade the ram on my G62, since the out-of-the-box 2x2gb:

  ( http://www.kingston.com/it/memory/search/discontinuedmodels/Default.aspx?DeviceType=3&Mfr=HEW&Line=G... the serial number of my modules is 598856-001 and 002-598856, so that they are 2 gigabits - DDR3 1333 MHz)

  to them:

  http://www.Kingston.com/it/memory/search/?partid=kvr13s9s8/4

  Their specifications, they seem to be compatible, but when Windows tries to load, it just crashes and restarts and gives me this type of error: Kernel security check failure, then restarts, and so on in a loop.

  I checked the new memories on a different laptop and they work very well, I swapped the slots but nothing has changed. So, the problem probably lies in windows or directly on the configuration of the bios (but I can't change anything in there, I f.37 InsydeH2O, 3.5 version).

  You know a way to solve this situation or can tell you me a type of memory which will work for sure for the upgrade?

  Thanks in advance!

  Not exactly. Some versions of the G62 will accept 6 GB of RAM (4 GB and 2 GB), but this point is largely moot as I understand you are trying to install 2 x 4 GB total 8. In general, you do not want to mix the modules in sizes because you lose operation "dual channel" which is a bit faster than single-channel you can get from a module or modules of mixed size.

  The speed of the memory of your laptop is DDR3-1066. Your 1333 mhz modules are downclocking to 1 066 mhz and a memory downclocks better than others.

  You should carefully read the manual, but if you arrive at the actual parts for the memory modules list it shows a 4 GB module is only compatible with version 1.1 of the G62. 8 gigs will accept so not all models. Other than 1.1 versions are limited to 4 GB of memory.

  You have the processor i3 - 330 M with a dedicated ATI 5430 M video chip with 512 vram. Those who take the 8 gigs (version 1.1) have the 5470 graphics. See pages 19 and 20. You have version 1.0. He maxxes to 4 gigs is therefore peeling when you try to install 8.

  It is a lot of information, but the basic message is that you already have so much memory that can be installed on your laptop.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• upgrade ram to 4 GB aspire ax1920-ur22p

  I have tried 2 sets of ram. New RAM gives just 1 beep long and does not post. Original ram (1 to 2 GB stick) works very well. New ram is 2 sticks of 2 GB ea, but even if I put 1 Stick, it still does not.

  Hello

  Your original ram:

  KN.2GB0H.009 - UNIFOSA GU512303EP0202 2 GB DDR3 1333 MHz UNBEFFERED

  Your new RAM:

  I have no find any information. (S23798C is not a part number). I think that it is not compatible.

  "Beep code":

  A long beep: memory refresh timer error.

  I suggest you to buy an another Unifosa stick 2 GB memory.

  Note:

  P/N: DT. SG8AA.002

  Model: Aspire X 1920-UR22P

  OS: Windows 7-64 bit

  I wish you a Merry Christmas!

• I need to buy new RAM for my iMac mid-2011. What are the specific specifications?

  I have a mid-2011 iMac, 21.5 inches, with an Intel Core i5 to 2.7 GHz and 4 GB 1333 MHz DDR3 processor. What RAM memory should I buy? There are a lot of options with different specifications listed on Amazon, and none seems correct. Help, please! Thank you

  Jbdammarell,

  I used OWC computer for my needs memory. Here is their recommendation for your computer.

  

• How you upgrade the RAM on Mac mini (end of 2014)

  The Support page says it is not accessible, but everything is assembled (without guarantee) just to write this post in Safari with open iTunes I am hitting 3.3 4.0 GB.

  I've always liked Apple since the first iPod came out, but I didn't know that their computers were also disposable.

  I guess I should know better when the price is only a little higher then the Apple TV, I went to buy, but it's the first Apple computer, I buy, and it's better than my Apple TV ver1 who died.

  So when I cut it open I find accommodation from the PIN and what chip will take the 1.4 GHz, 4 to 8 GB machine.

  I guess there is only one slot (pinout) and it is probably welded in.

  No, they were serious

  the RAM is welded in there. You can not remove it.