Block / power off of the device of the API

Similar Questions

• 4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Sudden power off of the show on X 220 Tablet with accumulator

  We discovered this problem in early August with our new X 220 tablets.  We have a 1 to 1 tablet pc program.  About 75% of our first grade class has experienced this problem.  The tablets are running on battery power with its long battery life.  Units spontaneously just will be turn off.  Not a clean shutdown but just a power off.  The batteries are in different States, when this happens, most of the time that both batteries are almost full.  I've seen this dozens of times with the students in my classes.  We discovered that it also affects another high school on our consortium.  Bulk buy our tablets with several other secondary schools.  Another school that has this problem has the same model and the manufacturer even date 11/06/2012.  It is estimated that 200 to 300 units are allocated between the two schools.  Lenovo product engineers work on the search for the source of the problem, but we have many frustrated students and parents.  Just curious if anyone else has experienced this problem with X 220 tablets and slices that were made around the first part of June?

  
  

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

  I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

  I have read several other posts on other sites with people having similar problems.

  There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

  Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

  Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

  Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

  Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

  When I unplug my power as well the battery seems last mabye 5 minutes at the most.

  Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

  If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

  Concerning
  Florence

  Hmmmmm... interesting.

• CMS power off is the only way to have specific colors on the screen

  Definition of the color settings in CS5 ID on 'Emulate Adobe Indesign 2.0 CMS' OFF is the only setting that allows for exact on the screen display colors (colors match the printed book shade Pantone Process)

  All the other parameters that you are supposed to use fact colors off - too bright/intense for most.

  I tried several different combinations, including in North America General Purpose 2 and uncoated sheets (which is how it will be printed).

  I have the document to CMYK and using only CMYK palette.

  I was wondering why this is?

  I have not the case.  Is this just a case of calibrate the monitor to match one of the CMS settings then?

• Smartphones blackBerry Torch 9810 automatically restart/power off of the problem.

  Hi, I took my BB Torch 9810 just 1 1/2 papillon, last few days my pnone is automatically reboot or turn off. Why? is thr a prblem of setting or technical problem? Please help ASAP :-)

  Hello uday808,

  Welcome to the BlackBerry support community.

  To fix the reboot you encounter on your BlackBerry Torch 9800, backup and perform a charge or upgrade your BlackBerry Device Software. For more information on this procedure, see the following article:

  How to update or reinstall BlackBerry Device Software using BlackBerry Desktop Software:
  http://bbry.lv/NWPC6y

  Where this process fails to resolve the problem, please contact your point of sale for options.

  Thank you.

• The ASA power off command

  We have ASA 5510 and 5550, running IOS 8.2.2.  Is there a command of the ASA power off or simply use the on/off switch switch?

  Thank you.

  dianewalker wrote:
  We have ASA 5510 and 5550, running 8.2.2 IOS.  Is there a command to power off the ASA or just use the power on/off switch?
  Thanks.
  

  Diane

  No there is no command of power off of the SAA. Just make sure that the config has been recorded, then power off with the power switch.

  Jon

• Idle device, power off, repeating background tasks

  I read somewhere that a background thread does not rescheduled tasks with a frequency that is too high, because it will prevent the device entering his "idle state" and so drain the battery.

  I have found no documentation on this, can someone please confirm and possibly a link to the documentation, if they exist? I have a background application to query for changes, every few minutes or seconds even according to the risk of exhausting the battery.

  Without doubt, when you press the power off button, the unit is actually off the coast and not in a State of rest? Or is there ongoing stuff while it's "off"?

  Thank you very much.

  Yes, it's true: frequently repeating tasks will prevent the unit goes into low power mode (standby). It is not just "lazy" mode with the screen turned off - it's a deeper sleep, so to speak. Make sure you reschedule these tasks at very low frequencies (time in hours) when the application is not active and that the screen is black. Distributes them regular intervals when the application become active.

• Power off SX20 with tactility and touchscreen

  Hello

  is it posible to power off of the SX20 codec through the touch screen? I just saw the option pending, but I can't find how to turn off the power.

  Furthermore, how can I set the sensitivity of the touch?, now when the codec is the sleep option, when someone is near the touch screen of this change online without touching.

  concerning

  Hi Filiberto,

  No, the SX20 cannot be turned off through the touch screen.

  You can reduce the sensitivity of the touch by turning on the resilience of the EMC mode.  To do, look on the Touch under settings, administrator (and connect), EMC resilience and set on IT.

  Note: Your question might be better placed in the section of forums where these devices are more actively discussed as in the section on IP Video telepresence , you posted in-I would say, if the above has not answered your query, you move your discussion there.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Canon IJ printer utility - disable auto power off

  The manual on my new printer MG2420 says I can "Disable Auto Power Off" of the power settings in the 'IJ Printer Utility'.  However, I have not an IJ Printer Utility in my Canon Utilities downloaded via a Mac driver.  Where is it, or if not, how can disable power off?  I want all the time.  Otherwise, the printer works perfectly.

  OK, no answers so I'll answer I am since I finally figured it.  On a Mac, go to "System Preferences" and click on "Printers & Scanners".  Then click on "Options and supplies."  Then click on "utility".  Then change the "cleansing" in "power settings".

  Then click on 'Auto Power'.  Then click on "Auto Power On" and "turn off".  Finally click 'done '.

  Of course, the Canon online manual is silent on this.

• Partially turned off and power off?

  Hi, I'm working on the API, vcloud

  I want to completely shut down a vm of the vcloud using vcloud api 1.5.

  However when I use its API, vcloud Portal status will switch to "partially power off '...

  If I try to power off from the vcloud portal, it will say "turn off."

  Is this a bug or a tip to turn off the virtual machine if 1.5. why it is partially?

  Thank you... Hei

  You must call "undeploy" with power action "power off" on the paralytic.

  The thing is that for vCloud uses vShield edge network management VMS and allocates the VLANs and IP addresses. Call just "switch off" - to stop all VMs regular associated VAPP, but does not stop the VMS infrastructure and do not release all resources allocated with the vApp network.

  The difference between the user interface and API is that you get this greater flexibility of power off the power on all computers in the VAPP virtual and maintain the network or through "undeploy" freeing resources network too. In the user interface can be in the same State if they turned off the virtual machines one by one.

• Computer has a black screen with a message "power off, then reinstall the jumper in normal mode position."

  Original title: black screen?

  My computer has a black screen with: turn off power and reinstall the jumper in normal mode position? Help!

  Hi Miguel C.
   
  a. What is the brand of your computer?
   
  b. do you remember of any changes to your machine before the question?
   
  I don't know what motherboard you have, but some is shipped with the 'Clear CMOS' jumper in the position unequivocally. Check the manual of your motherboard for this rider and make sure that it is in the normal position.
   
  J7B1 computer configuration jumper block requires a single rider set the configuration of the BIOS Setup utility. This allows the configuration in the configuration utility BIOS, including the frequency of bus and the processor motherboard speed.
   
  Note: Do not move this jumper with the computer turned on.
  
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  I think, you'd be best to contact the manufacturer of the motherboard as this seems to be a motherboard problem.
   
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I Lightrrom 6.1.1 - it crashes.  Answers do not - constantly.  Launch the program, wait 3 minutes, then it crashes - never to return.  Trying to turn off the graphics acceleration result in a blocking * instantly *.  All the GPU drivers are up-to-date (Wi

  I Lightrrom 6.1.1 - it crashes.  Answers do not - constantly.  Launch the program, wait 3 minutes, then it crashes - never to return.  Trying to turn off the graphics acceleration result in a blocking * instantly *.  All the GPU drivers are up-to-date (Windows system).  AND - I can't uninstall it either.  Without hope.  So, what can I do?

  Hello

  Please, go to the Windows, where Device Manager, expand display adapters.

  Turn off the graphics card and open Lightroom, go to Lightroom preferences, then the performance tab, and then uncheck the option "use graphics processor.

  Lightroom farm and go back to Device Manager and activate the graphic card.

  Open Lightroom and then work in Lightroom and check if it works very well.

  Kind regards

  Tanuj Sandal

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.