Satellite P300-h-13 is not waking up from sleep and hibernation

Similar Questions

• Alienware R5 is not Waking Up from Sleep Mode

  Hi all. I recently bought an alienware aurora r5, and it works fine except he wakes up not of mode before pressing the mouse or the keyboard. I have an Acer H236HLBID monitor connected to the GPU via HDMI. The monitor will turn on (No Signal screen) when I move the mouse, but the computer itself doesn't go out of fashion 'sleep'.

  I tried upgrading the BIOS to the latest version, but it does not solve the issue. I also tried to reinstall the drivers of ASMedia USB 3.1, of https://www.reddit.com/r/Alienware/comments/4ckz82/x51r3_wont_wake_up_and_freezes_randomly/d4za4ma?st=isy4l18r&sh=69044241, without a bit of luck.

  Here is some information on my system:

  CPU: Intel Core i7 6700 k

  GPU: GTX 1070

  Any help would be greatly appreciated. Thanks in advance!

  I found the cause of the computer do not wake mode "sleep" using USB devices. You need to boot into the BIOS setting and activate "Allow the devices to wake mode ' sleep'" or something similar. By default, this option is disabled.

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

• y510p screen stays black after waking up from standby or hibernation

  Seems that since the latest graphics drivers NVIDIA update (I'm not 100% sure on this subject, but I think that this is the case), my screen remains black at being woken up from sleep or hibernation. I know it's on, and what is not a matter of the computer is slow, because it is not and even if it were, leaving for several minutes and it remains empty and the power button and keyboard and everything comes on and it starts to heat up to the top, so I know it's something. Hit the FN - F2 for the backlight does nothing, so I don't think that is the question. The only way to solve it is to hold down the power button / stop and reboot, which pisses me off because sometimes I have a large upward job and am forced to lose. Anyone else see this problem? Could it be related to new graphics drivers, or is this something worse and related material? My screen looks OK when it comes to everything else.

  Thank you!

  Mod edit: Please keep in mind that these forums are accessible by people of all ages. Blasphemy and the attempt of profanity by bypassing the filter of blasphemy is prohibited by the Rules of the Forum , and have been removed.

  Well everyone, I think I 'solved' the problem. The latest NVIDIA drivers, I have installed the other day fixes the problem. I can sleep, hibernate, shut down, you call it without going through the screen lights up only not for the last day today. I can't say for sure, but I am sure that it was the matter of 99%. I appreciate the help nonetheless.

• Satellite P300 - output HDMI does not connect to the model of TV Samsung LE32B450

  When I use the Toshiba "HDMI" out utility to connect my Satellite P300 - 19K to my Samsung LE35B450 TV, I get the message "it is only effective when the PC is connected to a TV set that supports HDMI control via the HDMI cable.

  Does anyone have a solution for this? My Samsung TV is newer and has 3 HDMI input jacks and the same result. Is there another driver from Toshiba not requiring this vibration control function? This seems hardly reasonable given that all I want to do is display & there is normally no 2 communication channels via a HDMI cable anyway.

  Thanks in advance for any help there.

  I m not 100% sure, but I think that in s manuals is described clearly that this tool is designed for use with Toshiba Regza TV. With other words, it is Toshiba specific function.

  If you want to have the photo on your standard procedure for TV use for this purpose connect the laptop to your TV using a HDMI cable, turn on the port HDMI (HDMI channel) on the TV and use the combination of keys FN + F5 to switch between laptop and TV.

• Satellite P300 - 19F DVD does not work

  I have a Satellite P300-19F with Win Vista 32 bit Home Premium SP2.
  I can't read any DVD. It does not show a corresponding drive letter.
  If I go on under control panel Device Manager - system, it recognizes a Pioneer DVD - RW DVRTD08A, but has a warning sign on this subject. It is said that the configuration is corrupted.
  I've uninstalled and reinstalled without success.
  I downloaded the drivers from Toshiba and not to be resolved.
  What can I do to solve the problem?

  Thank you.

  Maybe this can help - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• Re: Satellite P300-150 - battery replacement not detected

  Hello

  I bought a replacement battery for my laptop that I got an error message saying that I should replace my battery.

  I bought a compatible battery, but it is not detected by my system.

  The battery indicator was strong when I plugged in for the first time in the power adapter, as it was when my old battery charge - but now it blinks in and out.

  I can't boot from the battery alone.

  Battery: PA3536U-1BRS, 4000mAh

  New: PA3536U-1BRS, 7800mAh

  Running windows 7.

  Any help would be greatly appreciated!

  Tom

  Post edited by: tomangegi - got a bit mixed model number

  Is the new battery compatible and listed as replacement for your Satellite P300?

  Somehow I think that it is not compatible and original Toshiba battery. I'm wrong about this?

• Satellite P300 - Multimedia Board does not turn on

  Hi all

  I have a Satellite P300-172 and multimedia buttons above the keyboard doesn't light up/work more after replacing the motherboard. The first time that I turned on the laptop that I had left the cable disconnected, now is correctly connected and they do not always work.

  I tried to do a hard reset, uninstall/reinstall VAP and update the BIOS.

  Any other suggestions to try?

  See you soon

  Hello

  Have you replaced the motherboard yourself? If so, it could be a connection then check the cable and make sure that it properly installed s.

  Also check the BIOS if there is an option for lighting or illuminated buttons. If so, you activate this option to get the keys to work.

• Satellite P300 - 1 9 - is not read or write CDs

  I have a new laptop Satellite P300 - 1 9, which has the Pioneer DVRTD08A combo player. (+ Windows Vista, updated firmware and drivers).

  The problem is that he does not read write or see even any CD! When a CD is inserted and as I click on the CD/DVD drive icon in Windows Vista, it makes noise repositioning for a few minutes and then he said: 'no disc '. Tried CD, CD - R and CD - RW Verbatim quality - still...
  At the same time, the disc works with any DVD.
  So I'm not shure, but I guess that should not be a hardware problem (like the lens dirty), I suppose also that is not a problem of filters in the registry, otherwise he would not see all the disks...

  Someone has an idea how solve it?

  > When a CD is inserted and as I click on the CD/DVD drive icon in Windows Vista, it makes noise repositioning for a few minutes and then he said: 'no disc '.

  This problem appears after the update of the firmware or it seemed before?
  What firmware version did you use?
  Have you checked if the CD/DVD drive has been recognized in the BIOS?

  I checked the page European driver of Toshiba and there are a few different firmware updates.
  But not all are designed for DVRTD08A.

  The update of the firmware v1.54 was designed for DVRTD08A and these FW Update resolves the error, the STRANGE does not stand on the SATA AHCI mode

  However if the CD/DVD drive is recognized by the BIOS and Windows operating system then this problem could be related to the hardware failure and in this case the material should be checked and replaced if necessary.

  See you soon

• Satellite P300 - control buttons do not work after cleaning keybord

  Hello

  I got a Thoshiba satellite P300. It has beautiful sensor Panel of media players (next end, top, etc.).

  After I cleaned my keyboard (pc was off) the controls do not have start working.
  In the Manager of devices without errors.

  I reinstall windows, but without success.

  What can be the problem?
  Is there a combination of keys that turn off this Panel?

  Thank you

  Just a question;

  How to clean the keyboard and how you installed the Windows operating system?
  Have you used the Toshiba Recovery disk / HARD drive recovery?
  Or have you installed a clean Windows operating system?

• Satellite P300 - 13 M start not at all

  Hello everyone,

  My Satellite P300 - 13 M with the number of product PSPC4E start not at all!

  When I put my screen down, it automatically goes in hibernation. But the last time I did it was just too apparently... I ejected my battery and the adapter to see if it would start. Negative results. I handed over the battery and ejected from the adapter. Negative results. I connected the battery and the adapter. Negative, no results at all.

  This means the end of my laptop?

  Please help me as fast as you guys can't because it's my only laptop work.

  Thank you very much

  PS If you want specs, then I can't give you their. I don't know the specs by heart.

  > This means the end of my laptop?

  No doubt :(

  But try this: remove the battery and ac adapter
  Leave the laptop disconnected for a longer period of time (a few hours)
  Then press the power button / stop along 30 sec.
  Then connect the battery and the AC adapter and try to turn on the unit.

• Satellite P300-135 hangs when it is in mode 'sleep'

  Greetings,

  My brand-new P300 Satellite crashes sometimes mode "Eve" of Vista, and I can't recover with just one stop.
  (eve of XP works fine)
  I see that others have experienced similar problem, but in my case seems to happen when I accidentally Tickle (on USB) mouse while switching "Eve".
  I just updated the BIOS with the latest version, I have disabled wake up on LAN features, but the problem is still on.
  Also sometimes revives of idle if I accidentally touch the mouse, the event if the lid is closed.

  What should be the mouse with the mode 'sleep'? I see no other option of power that is related to the USB.
  Any other ideas?

  Hello

  It seems that this issue has nothing to do with the material of laptops because it works fine on Win XP.
  As you say maybe external USB mouse causes this problem, and we must try to find out why it is happening

  In the BIOS, you can find the option called USB Sleep and fresh.
  Please disable it!

  I'm not very well if it will help you, but you should try this m!

• Can satellite P300-20R - I use the latest drivers from site Web AMD/ATI?

  I got a Satellite P300-20R now I want to update the video card drivers - ATi HD4650.

  Can I use the latest Catalyst for the mobility card that I find on the AMD/ATi website, and what is the procedure?

  Toshiba drivers are tested and adapted for certain graphics cards. Driver Toshiba will not force the graphics card to run the highest level and therefore protect laptop from overheating.

  On my Satellite P300, I use Windows 7 32 bit and driver Toshiba. It runs stabile and I'm happy with it.

  To be honest I don t want to use ATI driver and unfortunately cannot give you an answer to your question.

  Can you please tell us which of operating system you are using and what version of driver you want to install?

• Satellite p300-212 problems after downgrade to xp (yellow? and!)

  Hello

  I had the same problem as the guy FOM this thread---> [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=174977𪮁 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=174977𪮁]
  I lowered my Satellite P300-212 from Vista to XP. I used an installation Win XP CD of Win professional XP including Service Pack 3.
  Then I installed all the drivers from the Toshiba site.
  But I still have a yellow! in the Device Manager to the "Audio device on High Definition Bus". The details of this device show "HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & 3B6F18F1 & 0 & 0001"
  So I don't know, what driver I need to take to solve this problem. Rather, modemdriver etc are all installed and work fine!
  In the thread I linked above, the guy only has not copied driver WICH he installed manually. :(

  I hope that someone of you can help!

  Best wishes.

  greatwolfman

  Hello

  You should go to remove device manager and scream this device with the yellow! and?
  Restart the unit.

  In addition you must update Win XP for the last State because there are many patches that are required under Win XP latest series laptop.

• Satellite C55T: Win 7 does not recognize the card, LAN and WLan

  I have a problem.

  I ve downgraded my Toshiba Satellite A5222 C55T for Windows 7 64 bit and it does not have many pilots.
  Windows does not recognize my network connection and it didn't install my wireless driver.

  Maybe I need a chipset driver, but I found no drivers for windows 7.

  Please help me!

  If Windows 7 has not recognized the LAN and WLan card, you have not installed the proper drivers.

  A5222 C55T satellite is the portable American model.
  The drivers can be downloaded from the Toshiba help page we: [Satellite C55T-A5222 | http://support.toshiba.com/support/modelHome?freeText=1200005866]

  Choose here the drivers / updates & filter by Windows 7 64 bit (left)
  Now you should get all Win 7 64 bit drivers for Satellite C55T-A5222