Bluetooth does not work, may be driver is not install and is not available on the net. I have the computer hp laptop 2762.

Similar Questions

• Windows 7 does not start in the computer hp laptop

  Hello

  I saw the back of the office, where I work in the best web design company in the United States, both in India, my cell phone was frozen. Who went on to become of some process, but after I saw that the laptop has been frozen & there is no other choice to stop the laptop, because windows warned to for updates. I tried HP Recovery Manager, but system restore has been grayed out & I was not able to click on it!

  I don't have recovery CD so what can do about it?

  Kindly guide me for the same thing.

  Thank you

  Arun Nair

  Hello arunnair988. I understand that your laptop has frozen during an update, forcing you to restart from the beginning. Now you need to get back to a working condition operating system, but do not have any recovery media or Microsoft Restore Points. Is this correct?

  You have two options. The first is to try a System Recovery HP instead of a Microsoft System Restore. The difference is that a restore back your system files to a known point of work at the time, but let your personal files for the most part intact. A recovery is a reinstallation of the operating system. Will lose all data that are not backed up before recovery Follow these steps to perform a restore without any disk.

  If this does not work, or you want to get the physical disks, you will need to contact HP directly. If you are currently in the USA/Canada you can call to the 1-800-474-6836. If you are in another region, you will need to visit this site to get contact information for your region.

  I hope you find this useful arunnair988 of information; have a great day!

• sound does not come on the computer pavilion laptop

  I was using my computer when there was a popup for an update from hp. I've updated and then restarted the computer, but there was not his coming out. everything worked well, just noise. On the small speaker mixer microphone icon shows that he has his fate. even when I adjust the volume the ping that is supposed to be heard is not there, but it shows as green and spikes to show that there is a sound that is supposed to be there. How can I fix it?

  "Laptop HP Pavilion dm4-2191us

  Product number: QE382UA

  Hello

  Try the following.

  Download the installer from IDT Audio relevant on the link below and save it in your downloads folder.

  IDT Audio Driver - Windows 8.

  IDT Audio Driver - Windows 7.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• acerEXTEND does not load on the computer (Windows 7)

  acerEXTEND does not load on the computer (Windows 7/10). Error message says I need to be administrator. Computer said that I am logged on as administrator.

  Good to hear it!

• Try to download adobe first pro, but does not appear in the computer

  Try to download adobe first pro, but does not appear in the computer

  Premiere Pro is 64-bit.

  You must run a 64-bit operating system to install and run Premiere Pro.

• Bluetooth does not connect to the phone Moto G

  Bluetooth not connect to the phone of MotoGP

  How can I get there?

  Original title: bluetooth does not connect

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to connect to the Bluetooth.

  I will definitely help you with this.

  1. Do you receive an error message when connecting?
  2. Are you computer connection to phone with Bluetooth or other device?

  I suggest you go through the below methods:

  Method 1: Run the hardware troubleshooter, and check if the Bluetooth works.

  Open the troubleshooter of material and devices by hitting on any fly in the right edge of the screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), recording equipment and devices in the search box, type by clicking on settings and then by typing or clicking on find and fix problems with the devices. You may be prompted for an administrator password or to confirm your choice.

  Method 2: activate Bluetooth Support Service.

  Follow these steps and check if the Bluetooth support Service is started.

  (a) press the Windows key + R, type services.msc and press ENTER.

  (b) make a right click on the service named Bluetooth Support Service.

  (c) check if it is started, otherwise click Start.

  Download and install the latest Bluetooth drivers on the manufacturer's Web site.

  Method 3: To add a Bluetooth device, see the following steps:

  Once you have verified that a Bluetooth adapter is installed on your computer and the device that you want to connect with can be discovered, you can add more than compatible Bluetooth devices to your computer. Here's how:

  1. press the Windows key, it will appear on the start screen, tap Add a device, click settings, click Add a Bluetooth device

  2. click on the compatible Bluetooth device, you want to add to your computer, and then click Next. If you do not see the device you want to add, make sure that the device is turned on and discoverable. If you turned right on the device, it may take Windows several seconds to detect.

  Windows might ask you to enter a pairing code (sometimes called a PIN or pass). Most Bluetooth enabled devices had to be paired with your computer before that they can exchange information between them. To do this, they must exchange protected pairing codes. This means that only wireless devices, you authorize can connect with your computer.

  See also the link below:

  https://support.Microsoft.com/en-us/help/15290/Windows-connect-Bluetooth-device

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Bluetooth does not start at the L850-BJS Satellite during the installation of Flash cards

  With the flash cards installed Toshiba Bluetooth does not work, when I delete all work.

  Your ad is unfortunately not quite understandable.

  What operating system do you use?
  You have installed the clean version or you got laptop with OS preinstalled?

  If you want to use BT you must install battery page BT Toshiba BT - http://aps2.toshiba-tro.de/bluetooth/ and activate properly using FN + F8 key.

  For better understanding please post more info and a little more than one sentence.

• When I plug the USB FLASH drive into the PC it does not appear in the computer

  I have a USB Flash driver: Team Fusion more 4 GB

  Like this one:
  
  Same color and this one exactly.
  and when I put inside my computer I hear the BLOOP sound when I insert it and also when I go out, I hear a noise... but when I go to my computer it does not appear...
  It worked before, I inserted my USB Flash driver inside my computer... then when I right click on a file inside driver flash my computer got stuck and I force restarted my PC with exit it restarts normally and after that it doesn't work any more I just hear sounds when I insert the USB key inside and outside.
  I tried things.
  -Troubleshooting and it didn't help me at all... He didn't show me something when he finished it.
  -Tried restarting the computer and access bios and active in the advanced settings in the number 3 to USB - ZIP
  -J' inserted behind my computer and also in front of the computer USB flash driver.
  -Computer all analysed in depth scan with Advanced System Care Pro 5.4 and did not help even after a reboot.
  -Tried to reinstall the driver for the "Device Manager" USB flash drive
  -IMPORTANT! I tried to plug this USB on another computer and it arises there, but could not access the USB key, I tried to format and it says error and he said that he could not format... I tried to format it in NTFS, fat32, with formats fast and quick, but nothing has worked.
  SO the problem is with the USB FLASH DRIVE! not the computer...
  Help me please :| What should I do?
  Image when my USB driver is inside my computer:
  Open the image in a new tab to see full size image.
  Picture that shows that I reinstalled the driver for my USB Flash drive:
  

  Yes man, he is in disk management. I tried to do a right click on it and clicked on «letter of change of driver and paths...» "and it came up with error... Look man, I fixed that by myself... the flash disk is cool now xD you know what I did? I just went to my dad's pc... I tried to get the DRIVER USB FLASH, but he came up with the error and asked if I want to format it... I clicked format and it didn't work... I tried NTFS, FAT32, format not quick and fast and nothing worked... it was still * place... so what I did? I downloaded "HP USB Disk Storage Format Tool 2.2.3" of http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml here and then I formatted it with success! and then the flash driver disk worked on my dad's computer but when I tried to connect it to my pc, it does not appear lol but it worked on other computers, so it's cool: P I just going to format my PC: P it works now with the USB HP program disk formatting tool. only does not not on my pc, but it's ok... I formate my pc. :)

• Hitachi Touro Desk pro HARD drive does not recognize on the computer of Windows 8.

  Original title: Windows 8 - Hitachi Touro Pro support

  I have a Hitachi Touro Desk pro HARD drive that no longer works since I've upgraded to windows 8 last week. If I leave it connected during startup, windows will not start and if I connect it once started, it does not appear in the Solution Explorer, even if you can hear the disc turns away.

  The HARD drive works on all other computers and operating system, not just windows 8.

  When Microsoft will release a patch for this problem? I really don't want to have to re - install windows 7 so that I can access my files again.

  I have installed Windows 10 Technical Preview version 10049 and connected my drive from 750 GB Hitachi touro in USB 3.0 and it WORKS!

  I can't believe that after several years of frustration with this device with Windows 8.1 incompatibility it finally works great in Windows 10! Please check if you also have Windows 10 TP if your Hitachi drive works as well

• My Explorer Microsoft touch does not connect to the computer (Win 8 and 7 or iMac)

  I bought a touch of Explorer Microsoft wireless mouse and cannot understand why the mouse does not connect. The small usb dongle is recognized and the mouse turns works. The optical light is blue and the touch sensor clicks when I run my finger on it. Nothing happens when I press any button of the mouse (without interaction with the computer). It almost seems like its not even connected to the usb dongle. I tried to find out what's wrong with it or with Windows. The mouse itself doesn't simply plug the usb dongle or on the computer at all. It is not a Bluetooth mouse, so there is no button to connect or sync.

  Hello

  As it seems to be a hardware problem, you can check the link for the Microsoft Hardware supported:

  http://www.Microsoft.com/hardware/en-in/support

• When you delete a file in Vista, the dialog box remove does not close until the computer is restarted

  When you delete a file in Windows Vista, the dialog box remove don't close until the computer is restarted. It is sometimes possible to remove it by closing tha task list. When this is done, the Explorer is closed and restarted.

  Hi Brian,.

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to resolve missing or damaged on Windows Vista or Windows system files

  http://support.Microsoft.com/kb/929833

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

  Hello

  See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.

  If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately

  Tried add/remove the NIC of the model

  Tried to move the comments on different hosts

  Tried to create a new template from scratch

  NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.

  Anyone seen this before?

  I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)

• Direct 3D is not available, because the computer is locked.fix it how? Installing ME2

  try to install ME2

  Hi MervH,

  Thanks for asking this question to Microsoft Community.

  If I understand correctly, you are not able to install ME2. Before we begin, I have to ask you a few questions.

  1. which version of the Windows operating system is installed on the computer?

  2. What is the exact error message you get?

  3 are logged as administrator?

  4. do you have a security program installed on the computer?

  5 did you a recent software or changes to the material on the computer?

  Here's an article that talks of Direct 3D is not available. Go through it and tell us if it helps.

  If you perform the steps to start computer in a bun restart not forget return the computer to a normal start by following the steps described under How to regain a normal Windows startup mode.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help you.

• Drive C does not appear in the computer management window.

  Hello

  In the window of the computer storage management > disk management, I have see my drive C. CD - DVD drive and an external DVD drive only is displayed. C drive is not there. When I look under the disk defragmentation, the C drive is.

  What gives?

  Thank you

  Hello

  Use the Diskpart utility and check if it lists the C drive. Thelist volume command will provide information about each volume in the computer.

  a. Click Start and then click Run.
  b. now, type cmd in the text box and press on enter to open the command prompt.
  c in the command prompt, type diskpart.exe press ENTER.
  d. Enter the following command in the utility diskpart and press ENTER:
  the list volume

  Check if drive C appears in the list.

  See this article for more information about the Diskpart utility:
  http://support.Microsoft.com/kb/300415

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.