Blur or Smudge Tool strange behavior

Similar Questions

• Strange behavior of the rectangle tool

  I drew a rectangle with the rectangle tool and got a form than of a conical label around the rectangle. Never seen that before and I could not duplicate once I opened the application again. This seems a strange behavior of the app, or is there something that I don't know this tool? Please tell me this is something lacking in my knowledge base. It drives me crazy

  Monika, yes it was. He worked with the forward Warp effect. Thank you for your response. Mental health is back thank you for your kindness

• HP Pavilion Slimline s5304y strange behavior and stops randomly

  To start, here is my card:

  HP Pavilion Slimline s5304y

  Windows 7 Home Premium 64 - bit SP1 Build 7601

  AMD Athlon II X processor 2 215

  4 GB of RAM, blah blah blah

  Here are the symptoms:

  -Win7 starts to act strangely, when the keys are depressed they'll keep recording (like that, but forever)

  -Then it will attempt to force the closure but I keep open Word 2007, which will block the closure and I gives me the option to cancel or to force stop word.

  -J' I usually Cancel to see what it does, sometimes it continues to operate normally, sometimes, attempts to stop become more frequent until it ask no more, and Word cannot veto the shutdown request.

  -When I look at the Event Viewer system, he says he is told what USER (me) has launched the stop, as if it were normal.

  -A little more digging in the event viewer application section says that before stopping, "HP Support Assistant Service" had a "PowerEvent handled successfully by the service" with EventRecordID of 10883.

  -Meet system Event ID 109

  Microsoft-Windows-Kernel-Power

  EventRecordID 45150

  -Meet

  "The process C:\Windows\System32\winlogon.exe (USER) has launched the power off computer USER for the user NT AUTHORITY\SYSTEM account for the following reason: no title for this reason could be found.

  Reason code: 0x500ff

  Type of closure: power off

  EventID: 1074

  [Qualification] 32768

  There is no indication that something went WRONG minidump, no discharges of any sort, sfc/scannow ran own just like chkdsk, memtest, tester of windows 7 and all other diagnostic tools.

  He did it before, but very rarely, so I thought nothing of it (which happened in the spans of the months apart) but now happened several times a day.

  Recent software additions:

  Installing the software and drivers Lexmark Prospect Pro205

  -Updated Nvidia graphics drivers Geforce 6150SE nForce 430 to 8.17.12.9573 and it's Helper service ver 295,73

  What I did to try to rectify the situation:

  -Scanned with each virus/malware free scan in existence - deleted an infected file from Java Java/CVE-2011-3544. O operate. And another unrelated to the advertising program.

  -Updated HP Assistant and Advisor

  -Updated several times with various updates for windows 7

  -Clean the case thought it was overheating, but nope - clean as a whistle, normal running time

  -Good fans checked

  -Extract from food - looked good, constant voltage

  I haven't checked the power extension cables. I heard there is a problem with shorting out on the 24-pin extensions, but I didn't have an extension of 24 pins on the power cables.

  I've heard others have had problems with HP stopping randomly with a strange behavior, so I wanted to see what you guys have to say.

  Could this be problems of power with my house? The wiring is old... Or more likely is a short circuit in the cable/PSU?

  How can I easily repair/test of this theory?

  -All right, so the system restore has nothing but destroy some files, because I couldn't not correctly backup the drive between the random stops.

  However, I found the solution to my problem, that you won't believe.

  Short answer: I replaced the stock HP keyboard (model KU-0841) who seems to have been short.

  The long answer:

  -When the computer kept shutting down even in safe mode after a destructive recovery, I started watching again material.

  -Noticed my typing would sometimes record, sometimes just go crazzzzzzzzzzzzzzzzzzzzzzzzzzzy (like this).

  -Then comes the keyboard no longer works. Thus, while the veto stops with WORD 2007 and using the keyboard on the screen in Win7, I thought it was a terrible virus - it wasn't.

  -When I unplugged the USB keyboard it's a strange electric 'bzz' sound, like what you hear when static is unloaded. It turns out that the USB port has been be short-circuited by the keyboard.

  On the keyboard and the USB plug was going well, so I don't know who is to blame again, however - if someone is having the same weird problems with events of the power of the nucleus and 1074 with 0x500ff errors-try to check your hardware.

  After replacing the keyboard, everything works perfectly.

• Shape the strange behavior - Bug?

  Hey there, can anyone explain this strange behavior?

  After Effects CC 2015.3, Windows 7.

  Create a form, just STROKE-> convert to a path and simply animate the path...

  Watch the video:
  2016 09 23 19 48 25 253 - YouTube Bandicam

  Thank you

  Try this. After you convert the rectangle to a Bézier path select the pen tool, hold the tool Ctrl/Cmnd to change from the point to add to the direct Selection tool, drag the selection over the left upper point Bezier path, click right and choose the mask and path of shape > define a first Summit.

  Now animate your side and everything should be fine. The problem is that it seems to be no first vertex set when you create a Bezier path from a form. This happens with all forms converted into paths. If you hold down the Alt/Option key when creating a path of a shape tool a Bezier curve is created instead of a parametric form and the problem does not exist.

  I'm going to file a bug report.

• Strange behavior of cropping & other bugs

  Hello. My copy of Photoshop CS4 has recently started a strange behavior. I'm working on a 17 '' Mac Book Pro to end 2007 running OS 10.6.4.

  This is a screenshot just before cropping in image that I train.

  

  This is the same area after knocking back the harvest indeed. This tiny spec is what remains of my image.

  If I expand this area to 3200%, that's what I see:

  I've never met this before. I restarted Photoshop. I restarted the computer. I was in 20 GB limit of my hard drive, so I released 40 GB of storage space to backup the old files on DVD. My computer is a maximum of 4 GB or RAM. WTF? A bug perhaps related but somewhat independent, with that I had business since empty menu windows in Illustrator and Photoshop in my series of CS4. Opening the window hides in the PS and the swatches in Illustrator and PS resulted in empty menu windows. (The window is there, without tools or controls inside. Just grey.

  Do I need to remove and reinstall or something? Applications can get corrupted?

  Has anyone seen anything like this before?

  Thanks in advance for your thoughts!

  D

  Check the options for the crop tool bar.

  You entered a resolution, and the acreage resulting something tiny, resampled comes from the selected area.

  The tool to reset, or simply to clear the resolution field.

• Strange behavior of the Animation

  Hello guys.

  I'm fading in the textArea 3 and 3 labels State 'default' to 'addRecommend' and fade out the text box and labels seeOther State to addREcommend. The defautl-> addRecommend works very well. However, addRecommend-> seeOther

  show "a text box" (which is not included in State seeOther) and kill my "add to database button" (which is in a State of seeOther).

  If I delete detailText and details of my transition melted, everything will work, but I need to have my detailText and fade out too much in detail. If I do not explain my question, please copy my code and paste it into your flex. I spent 5 hours to debug it but no luck. I have really really grateful if someone could help me.

  < fx:Script >

  <! [CDATA]

  protected function add_clickHandler(event:MouseEvent):void

  {

  currentState = "addRecommend";

  / / addRecommendMove.play ();

  }

  protected function seeOther_clickHandler(event:MouseEvent):void

  {

  currentState = "seeOther."

  }

  ]]>

  < / fx:Script >

  < s: states >

  < name s: State = "default" / >

  < s: State name = "addRecommend" / >

  < s: State name = "seeOther" / >

  < / s: states >

  < s:transitions >

  < s:Transition toState = "addRecommend" >

  < s:Sequence >

  < s:Parallel >

  < s:Move target = "{add}" / >

  < s:Resize target = "{add}" / >

  < s:Move target = "{seeOthers}" / >

  < / s:Parallel >

  < s:Parallel >

  < s:AddAction target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < s: bland target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < / s:Parallel >

  < / s:Sequence >

  < / s:Transition >

  < s:Transition toState = "seeOther" >

  < s:Sequence >

  < s:Parallel >

  < s: bland target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < / s:Parallel >

  < s:Parallel >

  < s:Move target = "{add}" / >

  < s:Move target = "{seeOthers}" / >

  < / s:Parallel >

  < / s:Sequence >

  < / s:Transition >

  < / s:transitions >

  < s:Label color = "#000000".

  x="10"

  y="60"

  ID = "YourName".

  fontSize = "13".

  fontFamily = 'arial '.

  text = "Your name" includeIn = "addRecommend" / >

  < s:TextInput x = "10" y = "75" width = "50%" paddingLeft = "10" id = "userName" includeIn = "addRecommend" / >

  < s:Label color = "#000000".

  y="110"

  x="10"

  fontSize = "13".

  fontFamily = 'arial '.

  ID = "recommendCityLabel".

  text = "Recommended City" includeIn = "addRecommend" / >

  < s:TextInput x = "10" y = "125" id = "recommendCity" width = "85%" includeIn = "addRecommend" / >

  < s:Label color = "#000000" x = "10" y = "155".

  fontSize = "13".

  ID = "detailText" <!-if I add this label to my transition melted, the strange behavior->

  text = "you can add details!

  fontFamily = 'arial '.

  includeIn = "addRecommend" / >

  < s:TextArea = "180".

  x = "10".

  paddingLeft = "10".

  ID = "detail" <! - if I add this textArea for my transition melted, the strange behavior too - >

  Width = "90%" height = "160" includeIn = "addRecommend" / >

  < s:Button id = 'Add '.

  x="10"

  y="60"

  y.addRecommend = "350"

  width = "210".

  width.addRecommend = "150"

  height = "35".

  fontWeight = "bold".

  fontSize = "12".

  fontFamily = 'arial '.

  toolTip = "recommend your favorite places.

  label = "add your recommendation."

  label.addRecommend = "Add to database"

  Click = "add_clickHandler (Event)" "

  />

  < s:Button id = "seeOthers".

  y="105"

  x="10"

  y.addRecommend = "400"

  width = "220".

  height = "35".

  fontWeight = "bold".

  fontSize = "12".

  fontFamily = 'arial '.

  toolTip = "see recommendation of others.

  label = "see other recommendations.

  Click = "seeOther_clickHandler (event)" / >

  Hello

  I had a look at these, I think that the provision itself was a bit wonky, I enclose the code in a link like this forum tends to eat code that doesn't help when you're trying to look at the code.

  http://gumbo.flashhub.NET/Jerry/ source included
  You have the basics of work, but to avoid confusion in the States and the code, I suggest you try to group your objects to display relevant to the effects of transition, it is easier to control and maintain.
  On a side note use you designview in the ide to see how States will look, this tool will be of great help while you learn, ignore anyone who tells you not to use designview, it is a page layout tool and works well for these types of tasks.
  David.

• Firefox crashes (and other strange behaviors) due to gifs

  From a recent update Firefox displayed a strange behavior that surrounds the gifs. Sometimes, after viewing pages with a large number of gifs or several very large gifs, Firefox will do things like not animate gifs, or even do not load the images at all, an and will not stop until I have restart Firefox. What's more concerning is that sometimes in these situations, Firefox will simply hang and stop responding, forcing me to kill the process.
  This page shows the behavior of hanging fairly regularly: http://www.neogaf.com/forum/showthread.php?t=1021843 & page = 21
  It seems more likely to happen when I scroll the page quickly. The behavior persists when I restart Firefox mode without failure.

  39 of Firefox seems to have solved the problem.

• I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

  I just installed Firefox 29,0 for Mac.
  I have a strange behavior of the bar tabs and the address bar with this new version.
  Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
  (I add a screenshot, but I can't find a way to do it).

  Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

  • Firefox menu button > Options/Preferences > toolbars
  • View > toolbars > customize

• Strange behavior USB Flash Drive Satellite A100-626

  Hello

  I did install Windows Vista Business Edition on my Satellite A100-626 (PSAA9) following the instructions provided in the Web page of drivers.

  So far, everything works as expected, except for one little (or no) question.

  When I ask Vista to 'Remove hardware safely' my USB Flash drive, a Popup appears telling me to remove it. So far, so good :D

  The only thing is that the flash player is not put out as could be expected and and yellow question mark appears in Device Manager.

  Opening of the question mark can read what follows:

  "Windows cannot use this hardware device because it has been developed to remove safely, but it has not been removed from the computer. (Code 47) To resolve this issue, disconnect the device from your computer and plug it in again. »

  Following the instructions above, the light turns off, lol...

  Someone else met this strange behavior? If so, any solution?

  I tried a few USB flashes that run well on XP and they both do the same thing.

  Thank you, Nuno!

  Hi Nuno

  It's very strange. I have the Satellite A100-504 (comes with Windows XP Home edition). Last week, I installed Vista and all the stuff followed Toshiba document instructions facilities. I use the mouse wireless, external HDD USB web cam. With the help of these external devices together I never noticed a similar behavior.

  You have the same situation with all the USB ports?

• redeclenchables strange behavior digital output

  I created a redeclenchables digital dashboard task (finished) digital output as follows: (in DAQmx C)

  DAQmxCreateTask("",&_taskHandle);
  DAQmxCreateDOChan(_taskHandle,"/Dev2/port0/line6","",DAQmx_Val_ChanPerLine);
  DAQmxCfgSampClkTiming (_taskHandle, "" / Dev2/Ctr0InternalOutput ", _clockRate, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, static_cast (_sampleCount)");
  DAQmxCfgOutputBuffer (_taskHandle, static_cast (_sampleCount));
  DAQmxCfgDigEdgeStartTrig (_taskHandle, "/ Dev2/PFI4", DAQmx_Val_Rising ");
  DAQmxSetStartTrigRetriggerable (_taskHandle, true);
  DAQmxWriteDigitalLines (_taskHandle, static_cast(_sampleCount), FALSE,-1, DAQmx_Val_GroupByChannel, _pDigital, NULL, NULL);
  DAQmxStartTask (_taskHandle);

  sample clock:

  DAQmxCreateTask ("", & _taskHandleCO);
  DAQmxCreateCOPulseChanFreq (_taskHandleCO, "/ Dev2/ctr0","", DAQmx_Val_Hz, DAQmx_Val_Low, 0,0, _clockRate, 0.5 "");
  DAQmxCfgImplicitTiming (_taskHandleCO, DAQmx_Val_ContSamps, _numSamples);
  DAQmxStartTask (_taskHandleCO);

  When I run the task without redeclenchables parameter, it output a correct signal. However, if I run with redeclenchables it out almost exactly 2 times faster than normal. For example, a pulse whose width of 10 ms became 5 ms and repeats again to be 2 pulses of 5 ms. This is repeatable, no matter how much or how fast triggers provided.

  My card is PCIe-6363. I do not know what causes this strange behavior, and I hope someone can help on this.

  Thank you.

  It disappears after reset configuration. Might be interesting for future reviews.

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!

• Strange behavior file open/create/replace

  Hi all

  I will make my question as broad as possible because I think someone must have met this behavior before. I use the function open/create/replace file to programmatically open a file, giving a path entry created in an earlier vi. Strange behavior, I see, is that although Labview returns 1 error when I give my file programmatically, it reads the file OK if I give as a constant. The constant path that I give is exactly the same as one I am tryinng to programmatically.

  Any suggestions? Is it to do with a string formatting problem? I enclose my portion of treated VI the path_in section.

  Thanks for your time,

  Kind regards

  Harry

  Wild guess: you must use 'build path' instead of 'concatenate strings' build path.

  (Also use a constant of diagram of the path (not a string!) to "c:\ni-rt\" and get rid of the "trim whitespace' and the 'chain of path")

  See if that makes a difference. (build path is OS independent, while the operations of independent channels are not).

  Never use the paths as strings. There are very few cases where this would be appropriate.

• Issues coming out of "sleep mode" and strange behavior when restarting with GPU

  I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

  However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

  This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

  Without the GPU, none of these problems occur. At the very least, not regularly.

  I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

  Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

  Any suggestions would be greatly appreciated!

  

  Problem has been solved!

  For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

  http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

  It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

  However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

  As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.

• Strange behavior of TM2 recharge battery - only charges when almost dead

  Hi people,

  I have a new 2200 TM2T who exhibits some strange behavior of battery charge.  When plugged in, the battery will say "connected, charge", but the battery does not charge at all, no matter how much time he has left in (reported remaining level remains the same).  However, if I leave the battery discharged completely, it will start loading again, all the way up to 100%.

  It's a kind of weird automatic battery calibration or something?  I am hoping there is a way to solve this problem, because it's really annoying to not be able to keep busy all the time.

  Hi people,

  I just wanted to report on the resolution of my battery problem.  Returned the laptop to HP, and technical support has replaced the motherboard.  Works fine now.

• strange behavior

  Hello

  I have a strange behavior on the main screen of my application.

  My screen looks like this:

  1, 2, 3, 4 and 5 are bitmap with navigation button, click scope.

  I have a separate Thread for processing and this X thread updates the content of the label and label B.

  Whenever the thread call X function is update the function labels are running label.setText (newtext) on both labels.

  Stange behavior:

  When the x thread updated, the text of the labels (via the function Y) the emphasis is on button bitmap 1,2,3 or 4, the text of labels disappears and the screen looks like this:

  

  If we move to the development for bitmap button 5 or ListField labels updated successfully and the screen looks like this:

  

  I checked on debug only when the labels are updated that the text is not null.

  You have some ideas on what is the cause?

  Best regards

  Hello

  I found the solution for the strange behavior. I added a "HFMst.ivalidate ()"; on the function Y and that fixed the strange behavior.

  Thks simon_hain and arkadyz for your help.