Blurry images when printing from indesign

Similar Questions

• HP Photosmart 7280 C: Jam printer when printing from InDesign

  I seem to be able to print anything, except when a print to InDesign file. When I try, I get a paper jam?

  Hello

  You use a different type of paper to print with InDesign? The program itself can cause the paper jam, but maybe the settings or the paper you are using are the cause of the problem. I often print on thicker or InDesign photo paper and usually just put a sheet in the printer at a time to help with jams and paper pick up questions.

  Please report parameters and the type of paper you are using to help find a solution. Thank you!

• Print quality poor on the logos of the bitmap when printing from InDesign

  We have a Mac studio. One of them prints this indesign document well, the quality of bitmap images appears as it does on the screen.

  On all other Macs on the same printer, print the logos of the bitmap on the same document with a really poor quality.

  Any ideas? It drives me crazy that have checked the settings of the printer, and it seems that they match the Mac to work.

  Don't think it's a thing of driver as anything other than the bitmap to print logos and all other documents very well.

  In the print options, you should also go to the poriton of "Graphics".

  Make sure it is not set to the Proxy - make sure it is set to "Subsample Optimisied" or "All".

• Image reverses from positive to negative when printing from Windows Photo Gallery

  When I try to print directly from the photo gallery in the overview page positive image flashes until shortly before the reversal to the negative and I see nothing in the preferences of the printer (Canon iP4500) to remedy this.

  The effect occurs only on jpg that were downloaded from my own camera - other jpg is OK.

  I have no problem with the same images when printing in Photoshop.

  Hi bigfritz,

  Welcome to the Microsoft answers community site.

  Different types of devices tend to possess the capabilities and features of different color. Displays, for example, cannot show the same color scheme that can reproduce a printer. It is because of the fundamentally different processes that each device used to produce color content. Scanners and cameras have different color characteristics. Even different programs sometimes interpret and process colors differently. Without a consistent color management system, the same image can look different on each of these devices. The appearance of the content of the color depends also on the viewing conditions (for example, ambient lighting). This is because the human eye adapts differently to different conditions, even when you view the same image.

  Thus, the color management manages relationships within color content so that an acceptable appearance can be achieved on different devices with different color and in conditions of display capabilities. This requires color management systems to control the relationship between the characteristics of the device and viewing conditions to produce acceptable results.

  Color profiles are usually added automatically during the installation of new devices. Color profiles can also be added by color management tools, such as devices of calibration for the monitors. As a result, it is likely that there are already profiles for your devices.

  However, if you need to install a new profile, follow these steps:

  1: open management the colors by clicking on the Start button, clicking Control Panel, hardware and sound, and then clicking color management.
  2: click on the devices tab.
  3: in the list of devices, select the color device that you want to associate with one or more color profiles.
  4: select the use my settings for this device check box, and then click Add.
  5: you should see a Source to sRGB space. In the print profile you must now select the barrel profile that fits the study. You should see these choices for Canon paper.

  Canon IP4500 series GL2
  Canon IP4500 series GL3
  Canon IP4500 series MP2
  Canon IP4500 series PR1
  Canon IP4500 series PR2
  Canon IP4500 series PR3
  Canon IP4500 series SP2
  Canon IP4500 series SP3

  6: these correspond to specific types of paper Canon - PR > GL, Pro Photo paper > iced, MP > Matte
  7: then go in / intensity of the color and choose the manual Option. Click on Set and in respect of the Correction colors choose None.

  For more information, see Color settings management: frequently asked questions

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,
  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Printing blank pages when printing from Word 2007, WordPad and Notepad, print well other programs

  Weird printing problem

  Good, in Windows Vista and using a printer HP Deskjet 645c with the updated driver, here's the weirdness:

  When printing from Word 2007, Wordpad and Notepad, the sheet through the printer appear in print, but no printing actually takes place. Same for the two existing documents and those newly created. On the other hand, everything prints normally IE8, Firefox and Adobe Reader. Reinstalled the printer driver and also to delete the Word data key in the registry. No love. Automated ran, troubleshooting of MS, but still no love because he found no problem. Someone at - it a good idea? Seems there must be something in common between Word, Wordpad and Notepad, which I suppose are at least somewhat in the code, or perhaps in the way they approach the printer driver.

  Hi TNCharlie,

  (1) I want to clarify if you arejust I try to print the text or insertion of objects into Word and WordPad?

  Fonts and graphics damaged can cause printing problems in Word/WordPad

  (2) using a wireless printer?

  Check to see if it makes a difference if connected.

  Step 1: This test in word

  1. open a new blank document in Word.

  2. on the first line of the document, type the following text:

  = Rand (10)

  3. press ENTER. This inserts 10 paragraphs of the sample text.

  4. try to print the document.

  5. If the document prints correctly, replace it with another font or insert a clip art image, a table, or a drawn object

  Step 2: Don't know if you have tried this fixit, please run the fixit available in the link below and check if that makes a difference

  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems/en-us

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit ourMicrosoft answers feedback Forum and let us know what you think

• folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

  Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

  When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

  It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

  Any thoughts?

  Hi @Bodija ,

  I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

  When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

  Here is a document to clean the rolls of paper to see if that will help.

  A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

  Go to Solution 5: clean the rolls of paper.

  Using the full feature software drivers?

  Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems with it is software related, try the following steps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  How the name of the printer was placed in printers and Scanners?

  If you need help, let me know.

  Have a wonderful day!
  Thank you.

• Office jet pro 8600 how default to black ink only when printing from my ipad

  Is it possible to set an option to print the black ink only when printing from my Ipad 2?
  When I use the print icon the only option that shows is double page. I would like to be able to print in black only.
  I can set this option when you print from my pc...

  Hello

  AirPrint does not support black ink only printing, however the HP ePrint app allows it.

  Note that the option is available only for documents (for example Office, PDF, Web pages and emails files), but not for the Photo files.

  You can find the steps to obtain and use the application in the document below:

  http://support.HP.com/us-en/document/c01616126

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data

• Print from InDesign prints fine, but print after that exporting to PDF prints black as gray, low Image quality

  Hi all

  I have a printing problem going on with a document that I am currently trying to print.  When you export to PDF (high quality print or press quality setting, as well as to any possible color output) and then print, black my document go to the gray and the images look washed out.  This does not happen if I print directly from InDesign on my printer.  I tried to change the merger of transparent space, change the color profiles document and corresponding to export options to the options used when you print directly from ID, all without success. the document is always printed wrong when exporting to PDF first.  Any ideas why this might happen when exporting or printing to PDF, but not when you print directly from ID?  Thanks in advance for any help!

  I see.  Is there a way to ID artificially add CMY export in the same way as it does when sending to print?

  Is the destination of the document a composite digital printer or an offset press? If it is composite set your black preference for export fills and convert to RGB on export:

  

  

  In Acrobat, the two blacks will be 0. 0 | 0 RGB and will display the same

  

• HP Photosmart C4480 - blurry text when printing *.pdf

  Hi,

  I seem to be a common problem but can't seem to find a common solution. I have a printer [HP Photosmart C4480] who works well for ages. Now, however, seems to have problems printing pdf. As I said (or rather typed), This seems to be a common problem. In other sources on the internet, it is described as dark printed text or text that looks blurry (for example, here). It seems also the text is printed in a shade bluish the color of the font of the text itself is black. Just for the record:

  -J' restarted my computer. 3 times;

  -J' have 2 new hp original cartridge in the printer. The printer is aligned cleaned and everything;

  -L' printer is OK with other files (meaning not being not not *.pdf);

  -This isn't the files. They are ok. It's several files from several reliable sources (for example, my University) that all print sharp printers not HP. I would include a sample attachment, but I can't... O well. I'll add a link. You are here. (* Edit: link has been removed after the problem has been resolved).

  -The problem with the same printer on 5 consecutive laptops running Windows XP upwards and up to what Windows 8. All have the latest version of Adobe.

  -Adjustment of the color to print in black and white (only black and white) does not deny the problem.

  * Edit:-connected via USB.

  * Edit:-portable Test computer running Microsoft Windows 7 x 64 Home Premium (Microsoft Windows 7 Home Premium
  Version 6.1.7601 Service Pack 1 Build 7601).

  * Edit 2:-tried another cable USB (thanks for the suggestion Rich1!). Unfortunately, no results .

  * Edit 3:-problem solved partially. Software incompatibility between HP and Adobe. See the workaround. Only works for gray-scale printing.

  * Edit 4: Rich1 helped me to identify the problem. Seems that when printing the PDF files, the printer does not seem to use black ink and in turn simulates black by combining the primary colors (which gives all the quality of the results, where the blur). This problem also exists in Acrobat with Foxit substitution (for example).

  With sincere friendships.

  J

  I think I've solved the problem, even though it may persist in color prints.

  HP, this seems to be a widespread between the printing software and Acrobat Reader problem. I suggest that you find a more permanent solution. First mention of the problem lies in 2008 and it is widespread, but you seem to be ignorant.

  As to the question.

  This question seems to raise its ugly head after an update to Acrobat Reader. Several sources confirm this. As is the case, software HP seems to be an incompatibility with Acrobat Reader. It sucks because it is the most popular format for sharing on the internet of documents.

  As for the solution.

  1. do not use any web application to print. Save the file. Open it in Adobe Acrobat Reader;

  2. open the print menu [file > print];

  3. click [Advanced] at the top right of the screen.

  4. under color management, check that box to the left of something to the effect of "let the printer choose colors". (I have an English version of the software Acrobat Reader installed, bear with me. Press [OK];

  5. to return to the main print window, go to the menu of [Properties] in the top right of the screen. It should be next to the menu advanced;

  6. in the Properties menu, select the [color] tab. Once there, select an item to the effect of "print in grayscale". Directly under this option must be a menu drop-down. In this menu, select "use only black ink. Press [OK];

  7 print the file. As long as you print in black and white, the focus should be good.

  Hope this helps someone else! If you like my solution, give this guy there Rich1 some kudo is such that at least he had the kindness to answer and help me solve this problem.

  Thank you!

• Red tint when printing from Photoshop to Canon IP7250

  I have the same problem when I try and print to one of my canon printers.  I have Canon ip7250 and MG650 of Canon.

  The prints came out without any black and the image had a red tinted layer.  On the preview, the image looked OK and black look black.

  I changed between photoshop manage colors and the printer manage colors and then the red tint disappeared, however black was then with rays.  I experimented with different printing options and 7200 series PT1 works correctly.  I went back to print another using the same settings and the red hue appeared again.

  How to print correctly if the impression is identical to the image on the screen.

  I have a MAC with the latest operating system.

  Hi dannyboy888,

  Could if it you please let me know the version of Photoshop you're working on?

  Also could you please try to print from other applications outside of Photoshop with the same settings.

  Red displays on all images, or individual?

  Also, please make sure that the printer drivers are up to date.

  Kind regards

  Tanuj

• DeskJet 3050: HP Deskjet 3050 nothing happens when printing from a laptop computer, but works very well of others

  So I just got a new laptop and I am trying to connect to my printer. I think he has connected all the beautiful and the printer will appear on my laptop. When I go to print something good, it is said that it is printing on my laptop (including indicating the percentage of how much it is printed) before disappearing from the queue on my screen. Nothing happens however on the printer.

  When we use another laptop that is connected before, it prints perfectly.

  Not really sure what is in place and was hoping someone could help me!

  Thank you

  Hey @burtonc,

  Welcome to the Forums of HP Support!
  
  I see that you have some problems with your Mac OSX 10.11 machine printing the Deskjet 3050 all-in-One printer. I can help you with that.

  To resolve this issue:

  1. If the printer is connected via USB cable to your Mac, delete it.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left side.
  4. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the 'more' in the corner.
  2. Select your printer from the list.
  3. Click in the box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results follow these directions. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Hide email address when printing from Windows Live Mail

  Original title: "hide email address when printing.

  Hello
  Please how to I could hide my email address when I print a document from Windows Live Mail.
  Hassan
  Bangladesh

  Thank you for visiting the Microsoft answers community site.

  The question you have posted is related to Windows Live Mail and would be better suited in the Windows Live Solution Center.

  Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/forums.aspx?ProductID=15

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.