Bootcamp for Windows 10 update hangs on the Logo

Similar Questions

• Cannot install the update of security for Jscript 5.8 for Windows XP (KB971961), also tried the manual installation

  While were are at it, I have not been able to install this update, guard saying failed, and have also tried manual installation just in case you ask

  A security update for Jscript 5.8 for Windows XP (KB971961)

  See the section "How to get help" of http://support.microsoft.com/kb/971961

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Security customer includes home links page free security update support, too
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• C5180: All IN ONE PRINTER FOR WINDOWS 10 UPDATE

  I got a message from HP support updating Windows 10 for my printer.  When I completed the update, screen says that it has failed.  Update was for Windows 8.  I followed troubleshooting without result.  Printer for Windows 10 update is available?

  Contacted HP support line.  Apparently, even if my computer is new, he had a lot of viruses on it, causing it to be lazy, etc.  I paid a tax, the computer cleaned by HP online.  Computer works fine now.  I went back to 8.1 for Microsoft.  He suggested that I wait a few months than 10 has been out a while before trying again 10.  Focus on the upgrade of printer to 10 at the time.

• can not find platform for windows vista update

  my computer does not find the platform for windows vista update and I can't find anywhere to download from. Help! is there anywhere I can download that has not removed?

  Only-how to get updates of platform for Windows Server 2008 and Windows Vista Windows Update the platform update for Windows Server 2008 and for Windows Vista platform update can be downloaded from Windows Update. To obtain these updates, follow these steps:

  1. Click Start, click all programsand then clickWindows Update.
  2. In the navigation pane, click check for updates.
  3. When updates are found, click view available updates.
  4. Select the package to update that you want, and then click install.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  To get the updates recommended for your computer and important, underRecommended updates, select the include updates in downloading, installing, or informs me of the box put up-to-date recommended.

  You check parameters WU to ensure that you get a list of bottlenecks and recommended.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Windows some updates not installed the 646 error code

  Windows some updates not installed the 646 error code

  See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista update: platform supplement for Windows Vista update: KB2117917-french

  Hello, first of all, thanks to anyone who can help me!

  I have problems to install the platform update Supplement for Windows Vista update: KB2117917-french, who keeps trying to update automatically when you start computer.

  Basically, what happens is I turns off my computer and it will update first before turning itself off. I then come back on and it will start installation of finish 3 steps. After 100% on the last screen of the stage becomes black and restarts. As his departure upward, it goes to a black screen and it says something about registry 0/621 or so then he load some files. THEN it goes black again and restart once more.

  This time, it goes to the screen similar to where it puts up-to-date, except it says return update, and then my windows loads very well.

  It's a constant loop and I really need help. I tried the system restore, but I had not all dates really old to restore, and the older that I could do has not solved the problem.

  Again, any help would be appreciated. ^_^

  Hello, first of all, thanks to anyone who can help me!

  I have problems to install the platform update Supplement for Windows Vista update: KB2117917-french, who keeps trying to update automatically when you start computer.

  Basically, what happens is I turns off my computer and it will update first before turning itself off. I then come back on and it will start installation of finish 3 steps. After 100% on the last screen of the stage becomes black and restarts. As his departure upward, it goes to a black screen and it says something about registry 0/621 or so then he load some files. THEN it goes black again and restart once more.

  This time, it goes to the screen similar to where it puts up-to-date, except it says return update, and then my windows loads very well.

  It's a constant loop and I really need help. I tried the system restore, but I had not all dates really old to restore, and the older that I could do has not solved the problem.

  Again, any help would be appreciated. ^_^

  Hey Urdethismylife

  Try the repost in the forum for this windows update

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• need technical support for windows live update tool

  need technical support for windows live update tool

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/8f70d5a5-31a6-47fd-9eac-cded835d147f ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Everytime I open a session Windows installs updates 4 (probably the same)

  Whenever I connect (and disconnect) Windows installs updates 4 (probably the same)

  Assuming Vista or Win7...

  See this discussion: http://answers.microsoft.com/thread/cac55bf2-e271-e011-8dfc-68b599b31bf5 (which now includes a countless number of threads merged to confuse you more).

• I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play in 7.__it still doesn't react. What should I do? Please answer__

  I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play at 7.
  It still fails. What should I do? Please answer

  Hello

  a. what game do you have installed?
  b. do you get errors trying to run the game in compatibility mode?

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You can try to perform the clean boot on your computer and check if that helps.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  For more information visit: http://support.microsoft.com/kb/331796

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  You can check its compatibility with windows 7 in the Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Hope this information is useful.

• I lost my product key for my anytime upgrade for windows is anyway to get the product key for this drive

  lost product key

  I lost my product key for my anytime upgrade for windows is anyway to get the product key for this drive

  See http://support.microsoft.com/kb/811224

• Games for Windows Live does not accept the account and password

  I have a "game for windows live. I gave the true account with the password information. But the system does not accept it. WHAT CAN I DO NOW?

  Hello

  In dealing with the problem with games for Windows Live, it would be preferable to this post in the Windows Live community.

  Windows Live Solution Center: http://windowslivehelp.com/

  Hope this information is useful.

• Can configure is no longer Windows Vista update to include the updates for other Microsoft products (Office, Visual Studio, etc.).

  I once had a problem with Windows Update, which gives me a family of .NET Framework through the window of Control Panel\Windows to update to Windows Vista, even if it has been installed and has Microsoft support help me through EasyAssist. The problem of .NET Framework has been fixed, but now I have a problem: the Control Panel\Windows update window informs me today I'll receive downloads for Windows only, not for all Microsoft products.
  When I click on "Change settings", the Microsoft Update option is no longer present.
  When I click on the link 'Get' updates for more products, I am now redirected to the former site of Windows Update V4 (who is not supposed to appear on Windows Vista) instead of Microsoft Update, and this site Web of Windows Update cannot detect the Vista updates.
  So I'm stuck now with only being able to get informed about the upgrades to Windows, but not other updates from Microsoft. And we don't mean Windows Vista x 64 final with the last Windows Update Agent 7.2.6001.788. This new update would be the culprit?

  Hi Unicodemaster787,

  Even if it is not automatic, you should be able to get your updates from the Microsoft Download center http://www.microsoft.com/DOWNLOADS/en/default.aspx

  Other than that, your best bet would be to do a repair install and let the system to reinstall the original files and settings.

  When you perform a repair installation, it restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the Search box, and then click configuration in the list programs. Then click on install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  Remember, however, that it could undo previous changes to solve your problems of .net.

  Dave D

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ENVY M6 - 1184ca: 8.1 for Windows does not start after the installation of update KB2919355

  Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,

  DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14 

  and then

  DISM / online/cleanup-image /startcomponentcleanup

  So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.

  I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.

  Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.

  When people ask me "What's up?", I always say 'the CAP '.

  So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.

  Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.

• Update for Windows XP (KB2707511) security, why the habit of these updates to take on my computer

  Update security for Windows XP (KB2707511)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2699988)
  Update security for Windows XP (KB2709162)
  Update security for Windows XP (KB2685939)
   
  I cannont get these updates to take on my computers... there each of the thre about 5 times and have not been automatically updated or may be upcated manually...
   

  Hello

  You receive messages or error codes?

  Method 1:

  Step 1:

  You can visit the article to reset the Windows Update components and check if you can install the stand-alone package with security updates.

  How to reset the Windows Update components?

  Step 2:

  You can try to install the stand-alone package with updates and check if it helps:

  See the links to download the updates based on the version of Windows XP, you use.

  Update security for Windows XP (KB2707511)

  Update cumulative security for Internet Explorer for Windows XP (KB2699988)

  Update security for Windows XP (KB2709162)

  Update security for Windows XP (KB2685939)

  Method 2:

  You can view the history of update for updates error codes failed.

  a. click Start, all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, clickview update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  c. double-click the updates failed to check the error codes.