S10-3s black screen, no bootlogo - dead after four months?

Similar Questions

• Black screen with blinking cursor after the passage in MSC mode

  I followed the recommendation to disable startup secure in the Bios then move the UEFI Bios to the CSM. But when I go to set up what I see is a black screen with a stable cursor in it. And it doesn t go in the Bios.

  The black screen remains.
  I turn off the laptop and once again now, but I still have a black screen with a cursor that is stable and that s it.

  It's like that and it doesn t go to windows even go into the Bios, I can t.
  What should I do?

  Help, please...

  Hello

  After the passage of the CSM and disabling secure boot UEFI mode, you will not be able to boot from the HARD disk as the installation of Windows 8 requires secure boot and the mode of the UEFI.

  Now you can boot from the disc or other media bootable (USB flash key) to install the Windows 7 system.

  I guess you've made these changes installed Windows 7. Right?

  By the way: what model of laptop you have exactly?

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Computer won't turn on completely (black screen with blinking cursor) after installing windows updates

  8/7, the following updates have been installed correctly:

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Update definition for Windows Defender - KB915597 (definition 1.63.1021.0)

  Following this installation, the display resolution has been reset to be very low.  When you try to reset the resolution, I was alerted to a driver problem, so tried installing this in vain (below error code)

  Intel Corporation - display - Intel (r) G33/G31 Express Chipset Family

  Error details: Code 800703E3

  After that, he went to sleep the computer, but was unable to select 'sleep' (it is grayed out) but the stop keys option indicates that the updates were ready to install so I stop thinking which may help.  It was last night.  This morning, the computer was on, seen the screen DELL, then a black screen with flashing white cursor in the upper left corner.  I tried ctrl-alt-del, got the dell screen appears again, then black screen.  I tried ctrl-alt-del, thinking I could try one of the options key F at this time, but he won't even go to this point, the dell blank screen just screen.

  Any ideas would be very appreciated!  It is the second major problem that I had recently after updates vista install (the last time I temporarily lost access to all my files, because they were placed under a temporary user account that had been created!)

  Thank you!

  Hello

  You try to borrow the Vista DVD to any of your friends and do a repair (inplace upgrade) it might help you solve the problem.

  All the best,

  Geek

• black screen at startup and after logging

  I have this problem for a few weeks.

  When I start my pc, when windows xp starts to load sometimes it appears a black screen, nothing else.
  But sometimes win xp load success and after I have connect it reappears, black screen.
  I tried to find a solution for this in google, but nothing helps, it makes me angry.
  She sucks can anyone help me on that I would appreciate it. Thank you!!!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

• Inspiron 3437 black screen on wake-up after update 8.1

  Hi guys,.

  I recently bought this dell inspiron 3437 and windows update to 8.1.

  After the update, the screen remains black if the laptop has been in mode 'sleep' for more of, say, a few minutes.

  I read that it is a common problem after update to 8.1 windows, but I have not found a solution that works for my laptop.

  Any ideas on that?

  Update: yesterday I returned to windows 8, assuming that the 8.1 caused this problem.
  However, I get a black screen on wake up again and I have to do a hard reset.

  Edit: went back to 8.1 so that I could install this driver from Intel. Why is it not a standard update or in the support section of the driver dell?
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23323&keyword=4400+graphics+driver&DownloadType=drivers&lang=eng

  Edit 2: AAARGH, who has not yet set... After a few hours of sleep he still would not wake up properly.
  So, I choose not to let my laptop to sleep, instead I leave it hibernation.

  I have changed this in the poweroptions. Just put everything to hibernate instead of sleep (so when the lid is closed, when you press the powerbutton).
  It takes a few seconds extra for the laptop to wake up (but still quite fast, less than 10 seconds), but at least the screen comes alive.

  PS. Sorry for all the dubble posts suite thisone. Assume that something went wrong yesterday.

• Windows 8 black screen and the cursor after the connection

  Hello. I tried to upgrade to 8.1 Windows 8 Windows and it is stuck on like 3% for one hour, so I just rebooted the computer and he returned to Windows 8. I'm going to sleep and come back the next day and go on my laptop and it auto connects me and it goes to a black screen and I only have the slider on the black screen after login. I don't see the start menu, but I receive notifications for as sticky keys or any other notifications lights. I turned off my computer at least 20 times, took out the battery, empty the battery and tried to boot in safe mode with no luck. It is unlikely that it is an internal problem, because if I leave my computer alone for a few minutes, my screen saver photos appear. If anyone can help me solve this problem or help me get in easier safe mode would make things less stressful. I have an Acer Aspire V5 - 571 series. Thank you.

  Hi Roy,

  This problem may occur because of corrupted on the computer boot files.

  I suggest you to perform the checking and automatic repair if this solves the problem.

  If you do not have a DVD of Windows 8, I suggest you check out the link to see how to create an installation of Windows 8 media:

  http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

  Follow the methods suggested below:

  Method 1:

  Start on the recovery environment using the installation of Windows 8 media.

  Follow the steps below:

  Note: before proceeding further, make sure that the boot priority is set on DVD drive in BIOS. BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  • Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.
  • After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  • Select the type of keyboard and good time.
  • Click repair your computer in the lower left corner.
  • Select Troubleshooting in choose an option screen.
  • In Troubleshooting screen, click Advanced options .
  • Click the automatic repair of the Advanced Options screen.
  • Then choose the operating system.
  • Windows 8 will then pick up questions on the hard drive and check that all required files are intact.

  If the problem persists, proceed to the next method.

  Method 2:

  Follow these steps to perform a system restore:

  • After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  • Select the type of keyboard and good time.
  • Click repair your computer in the lower left corner.
  • Select Troubleshooting in choose an option screen.
  • In troubleshooting screen, click Advanced options .
  • Select System Restore.

  For reference:

  http://support.Microsoft.com/kb/2756559/en-us

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please let us know the results.

• Black screen with cursor just after turning on the computer in Vista

  When I turn on my computer, it's just a black screen and the cursor. I can move the cursor autour, but I can't go any further. The same thing happens in safe mode. Help, please! :( I tried to repair vista with the installation cd, but it is no problem. I searched around the internet and many people have the same problem, but I can't find a solution to this! Please help me! :(

  Hi SiljeRypern,

  Please see the thread with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/06881a84-595e-40b0-96CE-87cb7a1874ef/

  I hope this helps!

• Black screen HP Elitebook 850 after the mode 'sleep'

  Hello

  I have a HP Elitebook 850, which is about 3 weeks old. It is running Windows 8.1 with most of the HP software, which is available for this model, installed.

  Once the laptop goes into mode 'sleep' may not wake up for some reason any. The screen remains black and seeing everything seems normal. The only thing to do is either ctr + alt + delete to restart or shutdown forced by using the power button.

  Any ideas?

  Best regards

  Has exactly the same problem.  Called HP support.  They said that I needed to downgrade the video driver I was using.

  Specifically they asked me to check the version of the video driver first:

  1. Start screen, type "Device Manager" and then click to open Device Manager.
  2. In Device Manager, expand "graphics cards".  There were two shown:
     Radeon (TM) AMD HD 8500/8700 M M
     Intel(r) HD Graphics Family
  3. They asked me to double click on the graphics card Intel.  The dialog box properties open;
  4. On the tab driver properties dialog box, check the Version of the driver.  Mine was 10.18.10.3379.

  HP support and then asked me to download an older version of the driver, 10.18.10.3316.  Here's how:

  (1) on the laptop in question go to hp.com;

  (2) in the Help menu of hp.com, click Download drivers;

  (3) search by product: Enter 'Elitebook 850 G1' and press Go.

  (4) multiple results will come to the top, select the one that says 'HP EliteBook 850 G1 Base model Notebook PC';

  (5) to select the operating system: "Windows 8.1 (64-bit);

  (6) from the Index to download, select 'drivers - Graphics ';

  (7) tΘlΘcharger "Driver Intel video and control panel (International)" version 10.18.10.3316, November 15, 2013.  It's a big download, 158 MB.

  Once the download is complete, double-click the downloaded file to install it.  If you get a dialog box warning you install an earlier version of the driver that is currently installed, click Yes to continue.

  After you have installed the version 10.18.10.3316 driver, I restarted the laptop.

  To test whether the fix had worked I open a text editor and entered the text without saving it (it was to see if the unsaved document would still exist after that the laptop computer woke up from his sleep).  I then put the laptop to sleep by closing the form.  When I opened it again the light behind the power button has been slowly pulsed on and outside and the screen was black.  Based on the presented power button the laptop out of fashion 'sleep' and return to the lock for recording screen in.  Once connected, I found that the unsaved document was still open for the laptop had obviously just slept and rather than restarted rewoken.

  I hope this helps.

• Re: Black screen on Satellite P300 after removing the SD card

  Hello @ community!

  I had a P-300-21Z. 1 month.
  Last time I got the shot screen SD card in black and never returned to normal...

  The PC works fine on the external screen...
  I can see what is on the computer laptop screen at the back but is almost completely black...

  My guess is it is the lamp of the screen burned!

  What do you think?

  Thank you.

  > I can see what is on the computer laptop screen at the back but is almost completely black...
  Sounds like an inverter problem.

  The FL inverter (very small part behind the screen frame) is responsible for the backlight of the screen and it controls the backlight.
  If the FL inverter will start to malfunction, then you would see everything as behind a fog of ticks, I think this is your case

  I recommend contacting ASP which would be able to help you.
  The P300 notebook is not very old, and I think the warranty to be valid.

  See you soon

• (Redirected) Dell inspiron 15R 5521 become a black screen with blinking cursor after graphic update for windows

  Hello

  I m using dell laptop sice 2 years, last week I try to update my pc with windows last graphic update unfortunately after update, the screen become white with cursor flashing on it. Now I could not access my pc .safe mode not either work, attempted to pass the last known, good configuration but it does not work.

  someone pls help me in this regard. or help through [Admin NOTE: identification of Email deleted in accordance with the TOU strategy]

  While waiting for answer earlier...

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• VMware View 4.5 - disconnected sessions connect to black screen or simply close after 5 seconds...

  In collaboration with VMware View 4.5 using images of Windows XP Pro SP3 and connection through PCoIP, everything works perfectly on cloned VMs with the exception of reconnects.

  If I have a user disconnect from their office and then tries to reconnect to the desktop, the screen will be black, if you act quickly, you can retrieve the screen if you enter any keyboard input, but it will come back as if CTRL-ALT-DEL was pressed as I see the pop-up "Windows Security".  I checked for the screensavers screen or something like that and nothing so far.

  Do not have this problem in 4.0.1.

  Any help would be appreciated!

  Thank you

  Shane

  You have the same problem with a desktop XP vanilla without modification? Are there of the sureties or banner of the GPO applied to these desktop computers?

  May panic if there is a logon banner.

  ____________

  blog.eeg3.net | Useful links related to VMware

  If you have found this device or any other post useful, please consider the use of buttons useful/correct for award points.

• Black screen (non-responsive) AT100 after 2 days while on the current

  I love this small unit, but the last 3 months I have experienced a total blocking if I leave the unit from the mains and let it go to sleep. After a few days I can not wake him up. Power light flashes, battery light comes on and the wireless light is orange. To return to the life that I have to crack the case and remove the battery. I think it's a question of OS, so I included some info below. Hoping someone can enlighten us.

  See you soon.

  Android version is 4.0.4.03.000081316

  Kernel version is 2.6.39.4 - g8e40b1f android-toshiba@tesibuiuld7 #1 SMP PREEMPT Thu Aug 13 13:13:14 IST 2012

  Don t think its problem of system.
  In which case it would be a system problem, reset the device should help repair.

  You will need to reset the device, press and hold the power button / Stop button volume up.
  Then you should get a menu offering options including resetting the system.
  Choose this option to reset the unit.

  Good luck

• Black screen C805D - 13G satellite after the switch of the bios to the CSM

  Hi everyone, I really need help on this one.
  I have a Satellite C805D - 13G and it was working fine until I decided to install windows 7 on it. I did a USB key with the OS and the modified bios to UEFI in the CSM to boot from it. Well, since that point the PC never started again. It turns on but it shows nothing (even in the external vga monitor). RAM and HARD drive are very good.
  Y at - there anyone who can help? I have seen many similar cases on the internet, but I can't find any solution (already tried to disconnect the battery and hold the power button for 60 seconds)
  Thanks to all who help me to sort it.
  PS Sorry for my English, I'm from the Italy

  You just need to put the Boot Mode to the CSM to install Win7.
  If your USB boot it cannot be a problem with it. Try to create the USB using "WinUSB Maker"

• Mac mini black screen after upgrading to sierra

  Hello!

  My probleme:Mac Mini end 2014 black screen to start immediately after the upgrade of Sierra.

  Thanks for your help.

  Kentr0n

  Is there anything on the black screen (boot) at all ever?