Both devices work not... help

Similar Questions

• High definition Audio Device works not properly

  I use Windows 7 Home Premium with a generic "high definition Audio Device" that beat unexpectedly and I can't get it fixed. It seems that Windows thinks that the Audio device does not work correctly, except there is a red X on the speaker sign on my toolbar. I have no playback listed device, but there is a device under sound, video and game controllers. Its location is also "Location 0 (High Definition Audio Bus)". Please and thanks for the help!

  No, the Red Cross means no driver installed, essentially.

  Go to the site of the manufacturer of your computer, looking for support for your page, then download and install the specific audio drivers for W7.

  Re-post if it does not work. Do NOT rely on MS to do the update for you.

  See you soon,.

  Jerry

• N5902 Input Device works not when the Dongle is attached directly to the USB Port of the 3.0

  It's a big problem because the port only 2.0 on my Lenovo Yoga 700 is also used for charging and unless I'm on battery so I have to fix the dongle because otherwise the USB device is not recognized and I can't use my N5902 input device. Someone has an idea, a driver so I can install it manually? I use Windows 10.

  I managed to find a solution, I applied "Solution 2" of https://www.drivereasy.com/knowledge/fix-issue-after-upgrade-system-to-windows-10-usb-ports-don ' t - wor...

• Biometric device works not

  Hello... I have HP ProBook 4540 s and I can not find the biometric devices on my laptop... .so can someone help me

  Me and steup time of many other validity sensors

• Port forwarding works not, help

  I have a string of teracom TCW120B controller and I want to remote control. Those of teracom gave me the following response to configure the router:

  "Is there a router between the controller and the device? If there is a router, it should do the port forwarding.
  http://212.25.45.120:81 /.
  http://212.25.45.120:82 /.

  These two devices are in our office. I have forwarded port 81 of our router (with the real IP 212.25.45.120) to port 80 (http protocol) to the ip address of the first unit.
  The 82 port is forwarded to port 80 on the ip address of the second device. »

  I can not I put the lan router you can order Remote control TCW120B.
  Please help me with this problem.

  Ignore the Wi - Fi Protected Setup button if your wireless network is already reached.

• Follow-up of scroll of featured Alps pointing device works not

  Hardware and drivers > Alps pointing device, touch, apoint pad or whatever, the scroll track left works again. Troubleshooting fixed it once. How can I fix it again? Also why so many different names for the same device? __

  Visit your manufacturers of portable, specific to your model and download the right driver.

  Change your settings for MSUpdate for important updates updates ONLY and NOT driver

• Adobie flash player not working not - help!

  When you play it is slow and freezes for a few seconds, this is a slower operation. Games does not work correctly.

  When you play it is slow and freezes for a few seconds, this is a slower operation. Games does not work correctly.

  Uninstall the flash player and install a more recent version of flash player. (10.3)

• BlackBerry Smartphones Internet services bizzarely works not - help!

  Hello

  I have a Bold 9700 and basically whenever I am out of my home wireless network, my internet on my BB has stopped working. This was never a problem before, but now when I'm away from my browser, bbm and emails all stop working (although kik doesn't, oddly). I am pretty sure that this is not a problem with the signal, here where I am at the moment to adequate coverage and this has happened almost anywhere, I took it too. Not quite sure what went wrong and how there to remedy, but would like to have guidance that can be offered. See you soon!

  Yes, the BlackBerry logo

  On your home screen indicates you are connected to the required data BlackBerry for e-mail and other services other data functions BlackBerry like BBM and Facebook app, etc..

  I don't know why it's disconnected except maybe in some areas of low signal or data not?

• In my report of diagnostic systems that it establishes that there is an error indicating the symptom is "device is not working properly." Windows cannot load the required device drivers. "I don't know what to do.

  Windows cannot load the required device drivers.  It shows the details like Microsoft ISATAP adapter reports "tv_ConfigMgrErr31.  This device won't be available until the problem is resolved.  The Plug-and-Play ID is 17.  What this mean and how can I make the correction of this error and operate?

  Hello

  Control Panel - devices - right click on - UNINSTALL - REBOOT Manager

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  Y at - it no devices work not?

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Help, please

  Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Code 31 for others and for the PCI device is code 28.

  Hi Amit,

  Thanks for the reply.

  Step 1: Check out the link: http://www.microsoft.com/en-us/download/details.aspx?id=8957

  Step 2: See the articles for the problems of driver on the computer:

  Update drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Note: The article applies to Windows Vista too

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Step 3: Run the hardware troubleshooter

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  To solve the problems of slow computer performance:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=97QYdW2XfTc

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-CA/Windows7/ways-to-improve-your-computers-performance

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=HVhJmdoAiKy

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Please let us know the result. If the problem is still not fixed, we will be happy to help you further.

• sound not working - can't lift, I tried to fix it with Mgr. device but it did not help.

  I have trouble with Device Manager, but it did not help. I'm afraid to win 10 because of new problems, I do not want to download.

  Hello

  See if that helps you.

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  __________________________________________

  Or go to the website of your computer/laptop or the manufacturer of the sound card > looking for drivers and downloads Section > equip your laptop model number > find your operating system > download and install the drivers etc you will find Audio.

  Also read this information from Microsoft and follow the steps there.

  'No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• I just updated my iPad and it told me to activate it using my Apple ID. I entered my Apple ID and it will not work. Help please

  I just updated my iPad and it told me to activate it using my Apple ID. I entered my Apple ID and it will not work. Help please

  There seems to be a problem, especially with older devices. And I guess that's the end of Apple since it affects both.

  You can try to use iTunes to restore your device from a backup

  http://support.Apple.com/kb/HT1414

  Or you could wait it out and see if Apple fixes things.

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.