BPM SOA related Question

Similar Questions

• AT300 - battery / load the related question

  Hi all

  May I ask your help with a battery / load the related question

  I used my AT300 a few weeks back and I forgot to turn if off battery voltage flat then, so the next day, plugged the charger, but the loading icon does not appear on the screen.

  Sort left connected to work, but after 8 hours always toll-free, I'll start when plugged into the charger but dies as soon as it s disconnected.

  I thought that I may have killed the battery I found some people saying that if they are allowed to carry out completely so that they will not return to the top.

  So has his hand on another battery but same thing, the guy then a charged battery for me and I got him and started toward the top of a stack, but there is a red exclamation mark on the battery icon and the unit will still not take a charge

  If I plug the charger in the icon changes to show that there main power, if I look at the setting and go to the battery it says 0% unknown battery

  So I am at a loss and hope that some of you may have encountered this and have an idea how to solve this problem

  Thank you very much

  Hmm kinda sounds like some hardware issue about...
  To be honest, this is the first time that someone has reported these problems here in the forum.

  But have you ever tried to reset the default Tablet?
  Press and hold the power button / stop and the volume up button.
  Now the recovery menu appears providing different option. One of the option should allow you to reset the tablet.
  To navigate between options, use the volume up/down button.

  I hope that affecting the default tablet would help you to fix it otherwise, it seems to be hardware related issue.

• BPM SOA - Extension for Jdeveloper 11.1.2.3.0

  Oracle provides BPM - SOA Extension last edition jdeveloper. I searched but looks like they do not!

  user10383617 wrote:
  Oracle provides BPM - SOA Extension last edition jdeveloper. I searched but looks like they do not!

  No, they don't... which is clearly indicated on the download page of jdev...

  Important note - this version of JDeveloper does not include SOA and WebCenter - pieces to use these components, you will need to download Oracle JDeveloper 11.1.1.6.0.

  http://www.Oracle.com/technetwork/developer-tools/jdev/downloads/index.html

  See you soon,.
  Vlad

• Could not deploy composite BPM soa Server 12 c (Linux)

  I'm trying to deploy a simple BPM on SOA (12 c WebLogic) server on a LINUX machine. The SOA server appears correctly installed (green in the EM console and I can access the server soa-infra).

  
  

  I get the following strange error when you try to deploy (windows or wlst maven plugin... JDevelopper)

  
  

  Error in JDevelopper:

  [17: 10:16] sending internal deployment descriptor

  [17: 10:16] send (archive) - sca_BpmProject_rev1.0.jar

  [17: 10:17] Server, the response code = 500 HTTP response was received

  [17: 10:17] error deployment archive sca_BpmProject_rev1.0.jar to partition 'default' on the server soa_server [http://10.2.1.22:7004]

  [17: 10:17] HTTP error Code returned [500]

  [17: 10:17] Error Message from the server:

  There was a deployment of the composite on soa_server error: cannot find the Motor Service of type 'implementation.bpmn '...

  Error with the maven plugin:

  [ERROR] Cannot run com.oracle.soa.plugin:oracle goal-soa - plugin:12.1.3 - 0-0: deploy (deploy by default) on the sca_BpmProject_rev1.0.jar project

  : - > response code = 500, error: there was a deployment of the composite on soa_server error: cannot find the Motor Service of type 'implementation.bpmn '.

  .. -> [Help 1]

  Anyone have any idea on this?

  I realized what the problem was: I forgot to install the model BPM in my weblogic despite the SOA model field has been installed (which made me think that everything has been properly installed because I had my operational soa_server1)

• Error trying to deploy the BPM soa server process

  Hello world

  straggling to solve this problem but my cause my of my inexperience on BPM is worse than I thought.

  Once JDev compiled the Bpm process without error and create the ProjectName.jpr., I tried to deployed the process on the server of soa, soa_infra partition.

  What I did:

  1. go on JDeveloper | The application browser.

  2. Select and right click on the project of BPM.

  3. the SCW deployment Action started

  4 fill in the fields and click OK

  I get this error:

  "

  [16: 35:38] error in deployment of archives sca_project_name_rev1.0.jar of partition on the server soa_server1

  [16: 35:38] HTTP error Code returned [500]

  [16: 35:38] Error Message from the server:

  There was a deployment of the composite on soa_server1 error: deployment failed: error occurred during deployment of the component: nameComponent to service engine: implementation.bpmn, for composites: Project_name: ORABPEL-05250

  Suitcase BPMN deployment by mistake.

  error when trying to deploy the BPMN component file ' / coretech/fmw11/user_projects/domains/svil_domain/servers/soa_server1/dc/soa_8918455e-2622-4261-acd1-6e281a82a0d9 "; the reported exception: java.lang.NullPointerException

  This error was an exception thrown by the underlying deployment module.

  Check the trace for the exception in the log (the connection value level debug mode).

  .

  [16: 35:38] check the log of the server for more details.

  [16: 35:38] error in deployment of archives sca_Project_name_rev1.0.jar of partition on the server soa_server1

  [16: 35:38] # incomplete deployment.  ####

  "

  Do you know why the deployment failed? The compilation was ok...

  Thanks for all the help you can give me.

  Fairlie

  Hello

  Suitcase BPMN deployment by mistake. java.lang.NullPointerException.

  This could be a variety of reasons:

  (1) my problem was solved when I checked the fabricruntime.jar for jdeveloper middleware House \jdeveloper\soa\modules\oracle.soa.fabric_11.1.1

  and SOA home Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1 was different. So I copy the fabricruntime.jar of soa on jdev House home and redeploy the composite and it works.

  My conclusions at that time was namespace error.

  (2) you can also apply the below patch

  Patch 14618452: NPE IS THROWN everything BY DEPLOYING a PROCESS WITH SEVERAL SUB-PROCESS/WRESTLING EVENTS

  and then test the deployment.

  (3) in other words, you can try this:

  Stop, soa_server (s), node_manager(if running), Server Admin

  Delete the cache files and for Admin Server and server SOA tmp files in $ORACLE_HOME/user_projects/domains/base_domain/servers/AdminServer/cache and $ORACLE_HOME/user_projects/domains/base_domain/servers/AdminServer/tmp

  Same BOF Soa Server $ORACLE_HOME/user_projects/domains/base_domain/servers/Soa_server/cache

  After that, restart the server

  Redeploy the composite applications again since the file via the EM, or JDeveloper .jar or WLST script.

• Installation guide for BPM SOA Suite and Oracle 11g

  Does anyone know of a good installation guide for a new installation of the following SOA and BPM of Oracle 11 g (Windows 64 bit)?
  
  I'm looking to the 'Setup Guide quick for Oracle SOA Suite and Oracle Business Process Management Suite 11 g Release 1"(http://download.oracle.com/docs/cd/E14571_01/install.1111/e14318.pdf), but it is a bit dated (April 2010) and I see that is missing a few steps.
  
  Thank you

  Take a look at the for Oracle SOA Suite 11 g 1 material (http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf) Quick Start Guide.

  The steps that do not appear in the document you mentioned are included in this document. It takes you through the necessary extra step for the installation of Oracle BPM. Although for 11.1.1.4, it works very well for implementing 11.1.15 in a DEV environment.

  Dan

• KMC related question

  This issue does not relate to the JavaCard platform however, I think it would be appropriate to put here waiting for your answers :)
  
  I work for a company of personalization of cards to chip and I started with bank cards. I was asked if we could "up-to-date" KMC to map due to the fact that the Bank wants to use its own KMC to to diversify all keys derived in the map to the customization phase.
  
  When we import cards from the card manufacturers, in my opinion, the value default KMC is always 404142... 4D4E4F. I think the card manufacturer would give us APDU commands for updating this key 'super '? Or other solutions?
  
  Your answers are greatly appreciated and I thank you in advance.
  
  Best regards
  JDL

  This is appropriate for this forum because it is a question of GlobalPlatform and all Java Card cards based GP. You should watch the GlobalPlatform Key Management System functional Requirements on the GP site document. This article describes the main key management process.

  The KMC is a key intermediate which is never placed on the cards. This key card would come from there to open a secure channel for the card issuer can place the CDK for this card on the card. Each card will have a unique key based on the CMK.

  The cards you get from the manufacturer will have an ISK on them. Do not key to development set as you mentioned. If the keys are the keys to development, you must ask the manufacturer to generate unique keys for you. You should have a unique key that the manufacturer of trade safely with you. This key is then stored in your HSM so that it can be stored safely. You would also have the CMK in your HSM for safety. You have no need to tell the manufacturer what keys to use to create the cards. Do not exchange the set key when you customize the card. You can even exchange for another key set when you get the cards, but before issue you the cards. It all depends on how secure the organs of card must be. We had a few bodies of map with measures of physical security on them that you had to have the chip secure as soon as they got to the production office and then placed in a vault.

  How is generated the final CDK? By the Bank or you based on banks requirements? If it's the Bank, how do they get the keys to put you on the map?

  See you soon,.
  Shane

• Portege R700-17Z - Linux Mint suspend related questions

  Hello. I've been running Linux (Mint 12, 64) successfully on the cell above. Only nagging problem, is that the brightness adjustment does not work once the machine went to suspend and vice versa. He also seems to be a problem related to hang with one of the USB ports.

  I hope that an update of the BIOS to 2.20 could improve things. T it?
  I found two versions of the BIOS. There is a stand alone ISO dated Jan 2012 you can be burned on a CD and the computer restarts from there. However, the README file. TXT, said
  README FILE. CDC TXT 2012-01-23
  ACPI BIOS Flash version 2.20 for Portege R700/R705 (* PT310U/PT311U/PT314U *)

  Does anyone know if it is safe and if it works the upgrade to this BIOS that does not seem to include PT310E? ("E" stands for Europe and "U" for the United States?)

  Second option is to try to http://support1.toshiba-tro.de/tedd-files2/0/bios-20120207132338.zip whose support site allows in what concerns the P310E. I have to install Windoze 7 on another drive hard (I deleted it from my drive) and run this update of windows (I think it's necessary).

  Any ideas, I would be grateful...

  Hello Velastin

  As you probably know Toshiba doesn't support Linux and all updates, including updates to the BIOS, are offered for better functionality with operating system Windows. To be honest I have don t think that this update of the BIOS can help you, in your ad, the issues described.

  Have you tried to exchange their experiences on some Linux specific forum.

• Seeking advice for a BT throbbing related question

  Dear Forum,
  I would like your opinion on a performance problem related to the use of BT SW stack.

  * Information *:
  Non-Toshiba notebook, Intel processor dual core @ 1.2 GHz, 2 GB RAM, Windows XP pro (5.1.2600 SP2 Build 2600) running, all updates from MS, computer company, MS Office 2003. I got the PC two months ago and bought separately the "Wireless 360 module Bluetooth USB internal (Toshiba device, VID 413C, PID 8140, firmware 43.15). I installed the module hardware and the software stack of BT (Toshiba BT Stack, version v4.41.02 (D)). I use BT mainly to connect to my mobile phone, for which "Nokia Suite' v6.85.141 is installed. Nokia Suite works fine and as expected using the BT link.

  * Problem *:
  When you open a file de.doc/.xls by double clicking on it in Windows Explorer, the response of the system is very slow. Like 40 seconds (!) to open a 30 KB Word document. It can be reproduced. For other files, such as .pdf, the answer is much better. Word is started via the Start button and using file/open in Word to access the same file are OK. Open Windows Explorer by using the shortcut key Windows-E is very slow, open the Windows Explorer Start menu is normal.
  I don't see any "heavy" disk access or 100% of the CPU during this period.
  For the rest, the laptop seems to run OK.

  * Results so far: *
  (1) re-BT Toshiba battery installation has not improved things
  (2) for the shutdown of the PC, frequently the TosOBEX.exe process must take end 'manually '.
  (3) uninstall the battery BT SW makes him meet normal PC yet once
  (4) turn off Manager BT (System, click right, exit BT icon tray) has the same effect
  (5) judgment of the problematic effect deleted TosBTmng.exe process as well
  (6) from the PC with Microsoft not treat disabled people - except the battery BT - give a normal reactivity (!)
  (7) uninstall of McAfee virus Scan tools does not help
  (8) replace battery of BT with version 5.10.12 (T) solves the problem, but creates another problem: "services.exe" process continues to consume too much time CPU (~ 35... 40%)
  (9) I could not (yet) the identity of the process not BT which effect (s) this problem

  * Issues: *.
  Anyone who is familiar with this effect?
  Any suggestions for next steps?
  The advice of the Forum would be appreciated!

  WYTZE

  Add: (8) using BT Stack 5.10.12 (T) in my case has the cited problem as well as the issue with the CPU load.

• TRYING TO CONNECT TO EBAY BUT HAVE SITE NOT RELATED QUESTION

  I am a regular user of Ebay.  However, as of this morning, I was unable to connect to my account without a request for financial information.  EBay says his watch is not on their site and is a problem of browser security.  Did someone familiar with what's going on?  Thank you.

  Hello

  Remember to stay in touch with eBay and their user forums.

  -----------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ========================================

  After carefully checking with above and as appropriate:
  
  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
  installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
  other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
  ask about it here.

  Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
  unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  ========================================

  Microsoft PCSafety provides users at home (only) with the support free of charge in the treatment of infections of malware
  like viruses, spyware (including unwanted software) and adware.
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also

  Microsoft consumer Security Support Center
  https://consumersecuritysupport.Microsoft.com/

  Diagnosis
  https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetymalware&FAQ=1&task=Diagnostics&St=1&wfxredirect=1

  Microsoft online security
  http://www.Microsoft.com/protect/fraud/default.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Operating system Windows XP related questions

  Original title: OS related issues

  I have a dual boot (Windows xp & Windows 7). My problem is that whenever I open up the system and boot with win XP date time & system remain until this day but year get change for 2002. Even if I change in 2016. After awhile it back to 2002. Please help me.

  Hi Vishal,

  Thanks for posting your query in Microsoft Community.

  I understand that the year continues to change the Windows XP operating system. You can update the drivers in XP and check if that helps. You can also check for malware by running a full scan.

  However, because Windows XP is obsolete, therefore, some things might get affected as time goes by and we cannot help.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Application BlackBerry related questions?

  Hi all

  We are developing a Blackberry application. and

  1 would like to put a link on our site (when we finish the request) for users can download the application and install to the device through the Desktop Manager. What file I send to users?

  2. If I want to send the blackberry application to distribute through Blackberry app world, which file I

  you will need to send them?

  How can I make these tasks, please give me suggestions or make reference to this subject.

  Thank you best regards &,.

  Narendra Shekhawat.

  1. If you place your JAD and COD on your web url, you can guide the user to use their browser and tap the JAD file so that the application will be installed directly via OTA. You don't have to use the DM.

  2. http://na.blackberry.com/eng/developers/appworld/

  Also look in APPworld related forum for more details.

• DTS related question

  Let me make the following more detailed information:

  http://pubs.VMware.com/Release_Notes/en/VRA/vrealize-automation-701-release-notes.html

  • Spend an a vSphere storage DRS data store to another causes the system to delete instead of create a VM *.

  If you move a data store a vSphere DRS storage cluster to another group of DRS vSphere storage and level of automation of the target cluster is not automatic, replenishment created machine causes the system remove the machine with the following error: StoragePlacement: data store not specified by drive in VM DTS-people with reduced mobility. This problem will not occur if the virtual machine is cloned.

  Solution: Check that the automation of the target cluster level is set to automatic before moving a cluster DRS storage data store one vSphere to another.

  Known issues that the above is related to the vRA? This seems to be related to only vSphere environment without vRA.

  It is of vRA, but under a set of very specific circumstances: by selecting the action day 2 "reconfiguring" after the store of the migration data to a cluster of data store that does not DTS set to automatic.

  Grant

• The Migration-related questions

  Hello
  
  I would like to ask some under queries regarding oracle apps migration platform
  My current platform is Windows Server 2003 and Oracle apps 11i db version 9i 32 bit, single node installation
  
  My question is if I install OEL 5 64-bit (single node) can then migrate to it as my current implementation is the 32-bit host operating system?
  
  Before migration (single node)
  
  Windows 2003 32-bit operating system
  32-bit Oracle Applications 11i
  32-bit Oracle 9i DB
  
  After migration (single node)
  
  OEL OS 5.5 64-bit
  32-bit Oracle Applications 11i
  Oracle 9i 64-bit DB
  
  is the above before and after are correct is feasible as my current environment is 32-bit
  
  Please let me know
  
  Thank you
  Zaid

  Zaid,

  OK, I got the point, then I'll go for full 32-bit we don't need multi node environment

  Once I move to 32-bit 11i applications / environment db on 32-bit OEL after if I switch to R12 at this point that I can use single node 64 bit OS OEL while seen DB as 64-bit and 32-bit applications is this right?
  such a little update is possible?

  It's just for 11i but for R12 you can have layer applications running on 64-bit (since he is certified) in addition to the 64-bit database.

  Thank you
  Hussein

• Related question drop-down list help

  In my dropdown menu, I have several different time zones and they are all related number of UTC offset. The problem is that when I click on a zone (for example Russia), he returned to the zone which precedes it in alphabetical order with the same offset from UTC. This is problematic because many different countries sharing the same UTC offset (that is-14-14).

  I wonder if there is a way to stop the drop-down menu to change automatically in a different time zone that has the same offset or if there is a way to get into the drop-down list and add all variable offsets.

  I'm new to JS if possible sentence there for a beginner. I never used before livecycle but know C++ and Java, and will have a hard time setting. With all the resources out there, it is difficult to find a good place to get a Uni livecycle background so if anyone has recommendations on the reference material so I would be interested in this good.

  
  Thank you.

  Hello

  The problem is that the bound value represents the value of the object, so that it always displays the first item in the display which corresponds to the bound value.

  We know by one of the LC Designer, setItems(), methods that Adobe will at some point in the future allow us to link several values in a drop-down list object. However for now you cannot have a single value given.

  But there is always a workaround solution. If you set values the display of elements to include the country. Thus, for example for a display item «Russia», the bound value would be "Russia,-14 a 14.

  It is a unique value in the drop-down list, so it will not solve the current problem.

  The last step would be to analyze parts of the bound value, so that you get the offset of UTC, which you can then use in your script.

  There is an example here: http://assure.ly/HjRnIN.

  Hope that helps,

  Niall