Satellite A40 - code error fatal power of Eve 0x2

Similar Questions

• Satellite A40 - 10 - D drive: for code error is not found

  HELP PLEASE!

  I really need help to fix errors on my system.
  A few moments ago I accidentally deleted the DVD player + / optics to my laptop, and when I go to my computer, it's not here?
  The sys. tells me that the D: drive is not found, and the disc has been removed without preparation and cannot be found, error code 10.

  What this means, as I tried to update the BIOS and it didn't need, and I can't find a driver for the A40 Satellite from Toshiba.
  In addition, drivers seem to be ok and the boxes are checked in the device management, even if the optical drive has sometimes a yellow exclamation?
  Tried the recovery disc and no luck.
  Also the drive does not work now, because it does not read discs!

  Here is the Spec for the computer, as well as the summary for error messages. Reallr wouild appreciate any help on this please...

  My computer science - general

  Please wait while the information gathered...

  100% (collecting Local disk information)

  Refreshing the screen
  Specifications
  TOSHIBA
  System model: Satellite A40
  BIOS version: TOSHIBA Version 1.50

  Operating system
  Microsoft Windows XP Home Edition
  Version: 5.1.2600
  Service Pack: 1.0
  Location: C:\WINDOWS
  PID: 55277-OEM-0011903-00111
  Hot Fix: Q817606

  (Vivid RAM) memory
  Capacity: 2 GB

  Here is a list of the Dr. watson error reports that appeared the donation system.

  January 25, 2009 Service Control Manager the Application Management service terminated with the following error: the specified module could not be found.

  January 25, 2009 atapi the device, \Device\Ide\IdePort1, did not in the expiration time.

  January 25, 2009 Cdrom driver detected a controller error on.
  January 25, 2009 atapi the device, \Device\Ide\IdePort1, did not in the expiration time.
  January 25, 2009 Service Control Manager boot start or system start (s) what follows could not load: Cdrom
  January 25, 2009 PlugPlayMa swim the device ' S I t A D D - M R - 6! 1 '' ' (IDE\CdRomT_S_I_A_D_D-R_M_S_-_ 6! 1 '___1 #3' 423362730283321372620202020202 020202020 ___\3) disappeared from the system without first be prepared for removal.

  January 31, 2009 Cdrom driver detected a controller error on.

  January 31, 2009 Service Control Manager boot start or system start (s) what follows could not load: Cdrom

  January 24, 2009 Applicatio n error Faulting application helpctr.exe, version 5.1.2600.1106 failing module kernel32.dll, version 5.1.2600.1106, fault address 0x0001a67a.

  January 25, 2009 MsiInstall product Re: ParetoLogic DriverCure - 1722.There error is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Action DeleteScheduledTask, location: C:\Program Files\ParetoLogic\DriverCure\D riverCure.exe, command:-deletetask

  January 25, 2009 Applicatio n Hang Hanging application switch.exe, version 0.0.0.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

  Hello

  Akuma is right. I tried to find Microsoft document about this, but somehow the old links no longer work.
  In any case, after removing the Upperfilters and Lowerfilters optical drive should be recognized correctly again and you can use it again.

• Satellite Pro M70: Errror Message Power saver - code: 0x0

  Whenever I start my Satellite Pro M70 I now get an error Toshiba power Saver.
  It reads "Toshiba Power Saver A Fatal error has occurred. The program will be terminated code: 0x0.

  Can anyone suggest how to get rid of it.

  Thank you

  Hello

  It's not easy to say why this power saver utility error message, but generally a new installation of this tool should solve the problem.
  Have you tried to reinstall the energy saver?

• Satellite A40-SP151 - ide #1 error on non-existent drive.

  OK, I got a laptop Satellite A40-sp151; 3 months ago we sent it to repair and they have damaged the connector of the cd player.
  If we use it without the cd unit.

  It was fine, but yesterday I received an error ide #1, without apparent reason.
  The worst is that said error won't start the computer as it will freeze.

  Hello

  The ide #1 error means that the BIOS does not recognize the device that is connected to the #1 controller.
  Especially the HARD drive is connected to the controller of #0 and the CD/DVD drive is connected to the #1 controller.

  In your case, it seems that the CD/DVD drive is bad and that is why this error.

  Welcome them

• Re: Satellite A40 - hard drive error - will not start

  My friend bought this laptop in April 2007 and has been very happy with it until about a month when he stopped startup in windows xp.

  At the start, she now gets the message

  "PXE - E61 media test failure - check the cable for.
  "PXE - M0F outgoing intel boot agent"
  "Insert system disk in drive."
  "Press a key when you are ready.

  and then the laptop does not start in windows.

  I thought that the hard drive can have detached, so I took it out and he handed in a State, but in vain.

  I also tried to reinstall with the recovery CD but get the following error message
  status «»
  GDISK (E) no such fixed disk 1 "

  It is followed by * ERROR *.
  Error number 11030
  invalid message destination drive
  X;

  I ran a Toshiba (or he could have Hitachi) utility disk that I burned on a cd and went up on the audit boot.

  It said there are problems on Toshiba MK4025GAS, which is the hard drive. details coincide with what it actually says on the disc.

  The BIOS sees the drive start on as he is listed as the master, with the cd as the secondary drive.
  Therefore, is it true that the drive is broken. If so - can it be repaired or is there another solution.

  I tried Googling the error message and there are conflicting messages on this issue, so your help would be very appreciated.
  It seems crazy that the reader can break after only 18 months - was there a defective batch?

  If that's the case Toshiba offers a replacement or it will cost a lot?

  Thank you

  Nashy

  Post edited by: Nashy - sorry - it was bought in 2007 is NOT 2006

  In your case, the HARD drive is certainly defective and you need to replace. Satellite A40 is pretty old laptop without guarantee valid and there is no replacement from Toshiba.

  Just buy a new HARD drive. Hard drives for this good old classic are not more expensive.

• Satellite A30 303: error of calibration on power mat * a UJ-811

  Hello, I have a problem with my satellite A30-303.
  I am trying to record CDs and DVDs. A month ago it gives me an error at the end of the recording. The error is 'Power Calibration Error'.
  How can I solve this?

  Thanks for the help.

  Gonçalo Rato
  Toshiba Satellite A30 303

  Hello

  I read some of the comments in this forum about power calibration error and it seems that usually only the drive replacement will solve the problem.
  One reason might be poor quality media like CD/DVD
  But please check out this site:
  http://forums.Afterdawn.com/thread_view.cfm/93406

  But if this error occurs with all CD/DVD media, so in my opinion, the drive should be replaced

• Satellite C850 - 13 error Code 19 - drive DVD RAM - X

  The DVD player does not work.
  Device Manager says there is an error Code 19

  I uninstalled the drive
  I scanned for hardware changes
  Who is the reader, but would not install the driver
  He said to contact my manufacturer

  How can I fix the error Code 19?

  We don't often use the DVD player, but want to make a recovery disk
  We have not updated the driver or installed a new device

  I followed the instructions on this page
  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
  Found and removed the * value, for UpperFilters and Device Manager reports an error.

  But I can still use the disc to write to a disc, I get this error reported:
  "Power calibration area error has occurred, please check if the media is scratched or dirty.
  It is not.

  The drive is dead?

  Post edited by: Don with additional info

  Hello

  What system do you use?

  Also have you tried to write data on discs of different brands?
  It might be possible that there is a problem with the disc incompatibility.
  So if you haven't tried different brands in the past, I recommend to do this.
  TDK are good and recommended use and test the R discs.

  Some users to also clean the laser lens. This helped also.
  Hydrophilic cotton tip and liquid alcohol is a good tool to get the clean laser lens.

• Satellite L300D-12I: error of calibration of power while the creation of recovery disks

  I have a laptop Satellite L300D-12I & get a "power calibration error" when trying to create Toshiba recovery disks. Does anyone have any ideas how to get over this?

  Power calibration error especially if the laser lens cannot calibrate (moving) in the right position and can not handle the inserted disc.

  In most cases, the STRANGE must be replaced. :(

  I put t know why it happened on your L300 but I hope that your warranty is valid
  So contact the ASP as soon as possible and ask for the check!

• Satellite A40-141 - IDE #1 error after the insertion of a new CD/DVD drive

  Hey there!

  I have a laptop Toshiba Satellite A40 - 141 series.
  I have built in a new dvd driver and after I restarted my laptop

  I get the message IDE # 1 and I can't use the driver. I read in some forums that I probably need to update my bios. Now, here's the problem. I can only update version 1.5 for my laptop.

  I tried that and get the message that I already have version 1.5. I can't find an another update of bios for the A40 series except the 1.5 which is since 2004.

  Can anyone help please?

  Sorry for the long talk and bad English :-)
  Thank you

  Hello

  You are completely wrong boyfriend.
  This problem will be resolved not the BIOS updates!

  You bought the car just not compatible.
  The IDE #1 error means that the device connected to the IDE 1 controller was not recognized. Why? Because of the wrong master/slave/C-salt settings!

  Slim portable settings are controlled by the firmware and cannot be changed as weird for desktop PC.

  Either you contact the manufacturing of the CD/DVD drive and will require an update of the firmware and how to change these settings or you need to purchase a new compatible RATING

  Good bye

• disks of backup creation for a toshiba satellite receive error code error zzimages\zzimages\preinst.swm 020150-20-00000000 will help what I do

  disks of backup creation for a toshiba satellite receive error code error zzimages\zzimages\preinst.swm 020150-20-00000000 will help what I do

  Hi jaygoldstein,

  ·          What program you use to create backup discs?

  If you try to create backup discs using software created by Toshiba, I suggest that you post your question in the forums of Toshiba.

  http://forums.Toshiba.com/

• Yet CS4 Blu - ray error: "Fatal Error", Code: '0', note: "

  Someone has encountered this: still CS4 Blu - ray error: "Fatal Error", Code: '0', note: "

  Any ideas on what this means or how to fix it?

  Burn to a BD - R.  Tried two different Blu - ray burners.  First created a Blu - ray Image.

  For CS4, you must update the component of Roxio http://forums.adobe.com/thread/400484?tstart=0
  More and Roxio http://forums.adobe.com/thread/528582?tstart=0 or directly to
  http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN¶ms

  In addition, the names of long file or odd characters Cause crashing http://forums.adobe.com/thread/588273
  And here http://forums.adobe.com/thread/666558?tstart=0 #4
  And this thread of Message http://forums.adobe.com/thread/665641?tstart=0

• Error satellite A40-SP151 - compatibility of the writer DL, DVD - RW - ide #1

  Hello
  Can anyone add to the list of * of compatible DVD burners for Satellite A40-SP151 *.
  Googling readers listed previously, they seemed to be just DVD-ROM/CD-RW combo.
  Download
  Toshiba G8CC0000R810
  Hitachi G8CC00015810
  TEAC G8CC0001D810
  HITACHI G8CC0001K810
  Panasonic G8CC0001C810
  Toshiba SDR2412OAA

  I'm trying to upgrade to a DL, DVD - RW disc.

  I can confirm KD08 Pioneer and Panasonic UJ - 850 FWv1.10 are _not_ compatible, this last, I can't find any firmware for (trying to swap master / slave settings)... (Don't want to mess with the pioneer)

  I think the Ref. TOSHIBA DVD-RW/CD-RW COMBO SD-R6112 is compatible, if anyone can confirm this?

  Any help would be greatly appreciated.

  Thank you

  Hello

  I think that all of the list found in the manual of use of Satellite A40-SP151.
  In my (not for the A40) user manual I could find compatible ratings

  Greetings

• Satellite A40-241: I would like to display CPU

  I have a Satellite A40-241 with Celeron 2.70 Ghz 128 L2, BUS 400. I would like to change it with a processor 1 MB of cache L2 as Dothan or something. The motherboard supports such a processor. I bought a DDR PC2100 256 ram so I now 512.

  Thank you.

  Hello

  CPU Exchange issues are really often here on the forum. Usually laptops are not so flexible for hardware upgrade as workstations because of miniaturization. On many laptops the CPU upgrade or replacement is not possible due to a permanent connection. If the processor is faulty main Board must be replaced.

  I also read a few topics that some guys are upgraded CPU on some more latest and recent Satellite models but I really don t know if it is a good idea. The fact is that the entire hardware infrastructure is built exactly to work on the best way. As in the best way, I mean a few things:
  The BIOS is designed for specific physical infrastructure
  Power processor must be defined and allow consumption of mobile computing (new and faster CPU needs more power)
  Computer laptop cooling system is also suitable to work optimally. Faster processor will produce more heat and the temperature will be much higher. The result can be permanent cooling fan running or still overheating.
  Don t forget that designed Toshiba machine tool of Eve may also have some problems with the new CPU control

  I put t really know if it's really a good idea and I recommend you to use the maximum RAM for this device. Believe me, the CPU has enough power and if you use more Ram, you'll see that the unit will go much quicker and there is no risk of overheating.
  The last interesting thing is maybe how will modernize the costs?

• Satellite A40-S161: RTC battery low

  Hi guys,.

  I need urgent help. I have a laptop, Toshiba Satellite A40-S161, which gives me the following error whenever I restart the machine "RTC battery is low or CMOS checksum is inconsistent."

  I took the laptop to my local dealers who replaced the CMOS battery and advised me to leave the machine 'fees' for 6 hours [what I did], and the problem persists. Is there advice that I could follow to remedy the situation?

  Hello

  AFAIK in user? manuals it s nice instruction how to deal with it. If I am memory while the unit must be turned on, connected to the power supply current minimum 8 hours.

  Please check!

• password check fail error fatal system stopped. cnu8474wv1 please help very appreciated :)

  As soon as I turn on my hp computer mini that it says enter current password.

  After that I returned it 3 times it is said.

  password check ISP.

  error fatal system shut down.

  cnu8474wv1

  Any help is very appreciated

  Dear customer,

  Welcome and thanks for posting your query on the Forum from the HP Support

  Looks like you are looking for a password here, we will surely help you with this problem

  Please try this password = e9luvxvd63

  Steps to follow:

  1. use the posted above unlock code to access the BIOS

  2 disable all passwords that are enabled

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

  6. then exit the BIOS saving & exit option to save the changes.

  Troubleshooting:

  Incase if the password does not work please try a Hard Reset as follows.

  1. power off the laptop

  2 disconnect the power adapter and remove the battery

  3. press the Power button for 30 seconds

  4. connect the power supply/AC adapter (leave the battery for now) & start Notepad

  5. If now see you a password, please enter the same password I've shared before and press on enter

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star KUDOS left to say thank you*.

  Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP