Brick wall of blackBerry Smartphones

Similar Questions

• BlackBerry Smartphones BB Curve 9300 white screen

  Hello

  My BB used to plant recently and does not start until I have remove and replace the battery, yesterday I was on a call when it crashed I have replaced the battery, but he would not return to the top!

  I read the previous posts however I could not find a solution, I know that this is not a screen problem because when I blace battery I get "Blackberry" and the loading bar, it loads for 2 ~ 3 seconds then the white screen, seen a lot of posts to check the application loader but I don't have it on my PC.

  My PC cannot connect to the device, I removed the battery and plugged to upgrade, but my BB is on the latest version.

  Help, please...

  OK... Thank you... but...

  ali25783 wrote:

  regarding the links earlier, they did not

  The links themselves did not work? Or you were able to get the articles, but the information contained therein were not useful? I can't say enough...

  ali25783 wrote:

  I have not apploader on my PC if this is helpful to all.

  If you have installed, your PC, the desktop software and/or a bundle of BONES for your BB, then you apploader. Reference:

  • http://supportforums.BlackBerry.com/T5/desktop-software-for-PC/cleanly-quot-starting-over-quot-with-...

  But, to start your diagnostic efforts, I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  If there is no Safe Mode, I suggest that you test to see if your battery is causal. Please try this sequence... Note that, throughout the entire 4h15m process, your BB must be directly connected to a charger checked (not PC USB, not a docking station):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charged battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem. Carefully note please that 'new' and 'know' are not necessarily the same things. Although rare, a 'new' battery could certainly be defective. On the contrary, the easiest (and cheapest, btw) method to perform this test is to find someone with an identical BB which has no problem... trade in batteries and see what happens.

  Otherwise, then you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• Problems of blackBerry Smartphones

  My blackberry 9320 curve was updated yesterday, I failed to make updates and now the phone turns no-screen is black but the red light is on tried to do a system update, but nothing happens. Download expires, getting very frustrated because I have tried since 11:00

  Need the bbm as soon as possible

  • Thank you

  Hello and welcome to the community!

  First of all, it looks like your battery may be dead... Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charged battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  Once your battery is fully functional, so please visit this official download portal as you go along. If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp

  From a PC, you can install any compatible OS package (for example, for your BB model exact number) of a BB via this procedure:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC. After installing the operating system on your PC package, please remember to remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  Don't forget that you remove, since your PC, any other BB OS devices as packages with more than one installed on the PC can cause conflicts with this procedure.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry smartphones think I've seriously damaged my BB curve9320! need help ASAP please:)

  Could you possibly help me please?

  I had a blackberry 9320

  My encryption settings and firewall settings are locked and have tried everything to unlock

  And also my application management won't let me not reset my fire wall guests Ant guard saying reset

  By default the permissions without what do? I havnt had my discs either...

  Hello and welcome to the community!

  I can't tell you how you got in this situation, but what you describe resembles a restriction of the COMPUTING policy... Please check here:

  • KB30076 How to check for an it on a BlackBerry smartphone policy

  If there is a COMPUTING strategy and you are on corporate/BES, then you have to go talk to your BES admins... they are in control.

  If you have a COMPUTER policy but are not in BES, then you will need to make fairly drastic measures to clean it... and you don't need your original discs... just a PC and access internet.

  First, download and install the PC Desktop software:

  • http://us.BlackBerry.com/software/desktop.html?lid=us:BB:software:desktopsoftware & CAL = us: bb:softwar...

  Now, the behavior of your BB to your PC a backup:

  • http://supportforums.BlackBerry.com/T5/General-BlackBerry-functions-and/how-to-backup-your-BlackBerr...

  Now perform a ResetToFactory

  • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  Now run a restore of your BB of the backup that you have brought to your PC... but don't forget and NOT do a restore roughly. Don't restore these databases you need and more precisely to avoid those that relate to the COMPUTER policy:

  • KB10339 How to use BlackBerry Desktop Software to restore data from a BlackBerry smartphone from a backup file
  • KB03974 List of database for the blackBerry smartphone

  Now you should be in control on all these parameters.

  Good luck!

• BlackBerry smartphones, what's wrong with my Blackberry Bold 9930

  First the screen of my Blackberry would freeze upwards and it wouldn't let me do anything for a few minutes, so I had to take my battery out and then after that I took out my battery and put back in place he would have himself cut and wouldn't load, it would load at halfway then stop and try again. I use to have to take out the battery for a few days before its in so that he can turn it on but one day it does at all so I thought it was the battery but I just bought a new battery and its charging again to half way and stop and then try to load again, but it won't turn. Does anyone know what the problem with it... I have to wait a few days before you put the new battery in once again and then it will work or is the phone itself and I just need to get a new one?  Help, please.

  Hello and welcome to the community!

  Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charge battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem. I realize that you have purchased a new battery, but please understand that 'new' and 'well known' are not necessarily the same thing... While it's rare, that a new battery cannot be subject to default. The best thing to do is to find someone with an identical BB which has no problem... to Exchange batteries and see what happens.

  In addition, the next thing is to try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, thinking... what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  Otherwise, your next steps become much more radical.

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry
  • www.BBSAK.org

  Good luck and let us know!

• Help with calendar with Outlook sync blackBerry Smartphones to all appointments will not sync...

  I'm not a great tech, but I have some skills good enough for a girl, if I say so myself... but I'm so frustrated... I need help.

  This is my first public post... So I hope that I give all the information but who will help, if I missed something, please let me know.

  Here is some background info:

  I have a BB "BOLD"

  I use it NOT on a company (network)

  I sync my bb with my dell

  Windows Vista (UGH!)

  Outlook - Version 6.0.6001 Service Pack 1 Build 6001

  My calendar and my contacts are the most important reason, I have a bb

  My contacts are FINE

  My schedule is a MESS

  I have 2 separate email addresses work well my bb... For the purposes of his post, I will refer to them as

  [email protected] and

  [email protected]

  When I do appointments in my work calendar, I do one of 2 things to get all my appointments on the BB

  Plan my gmail as a participant in the designation address or

  Prior to the appointment to my gmail from my work email address

  When I make an appointment directly from my BB I do it by selecting Menu > new = my default settings of the account gmail under the 'send '.

  BB News:

  When I'm in the calendar and select > Menu.Options > calendars > I have 3 options

  [email protected] who has (518 entries)

  Default device that has (157 results)

  [email protected] who has (429 entries)

  When I go to the Menu > Options > Advanced Options > Services > (CICAL) by default is [email protected] , it shows that I have options to select my Gmail or my .mac address

  That is the problem - it did not used to happen, and I frankly did not know that my backup was messed up so I don't know how long this is happening.

   

  When I sync with Outlook

  There are only 518 appointments that are synchronized

  I can't get the other 157 (defect of the unit) + 429 (mac) to sync with my outlook

  Can someone help me to get them all on my gmail calendar? or in my outlook so that I can then sync back with the BB

  I will not sync my bb with my mac

  Here's what I tired:

  • Yelling at the computer
  • Yelling in Spanish at the BlackBerry
  • ignoring the two
  • I stopped myself to throw both of them against the wall.
  • 

  But seriously

  I put the BB Desktop Manager to perform a one-way synchronization > bb to outlook = NOTHING only synchronize gmail

  I changed the (CICAL) to my mac address and synchronized = NOTHING - only synchronization gmail

  I am at a loss and would appreciate any help.

  Hello

  We will remember and then on MAC records.

  Outlook contains records of 158 of the associated Gmail Calendar.

  The calendar by default folders must be cleared and restored to the associated Gmail Calendar.

  The Blackberry associated gmail calendar resulting will be then synchronized with Outlook to add the former default records

  resulting calendars synced to Outlook and Blackberry.

  Reading this, I propose more than once. Method 3 is what we do.

  Let me know, tomorrow, what questions you have the procedure so that we can ensure we succeed.

  KB16063 Unexpected results occur when syncing with a BlackBerry smartphone that has several CICAL service records.

  Let me know how it goes!

  Thank you

  Bifocals

• Problem of brick wall: clusters, the size of the reference table

  Good morning forums,

  I hit a brick wall with my application and I hope someone can help!

  I have an array of clusters of size for an indeterminate period (the cluster is generic and data contained irrelevant.).

  Entries to the VI are: a reference to the matrix and a Variant that contains the data.

  My problem is that I need to determine the size of these two entries in table and I can't find a way to do it!

  If the table contained a standard data type I can use the class name property to determine the data type and the size of the array returned by the property "select size" to determine the size of the dimension.  With this information, I can throw the variant into the correct data type and use it to determine the size of the array.  If the data is a cluster to the name class simply returns 'cluster' then I'm so not able to determine the size and can't get the Variant.

  I'm not worried about the casting of data (once I've determined the size this bit is childless), I just need determine the size (and preferably number of dimensions) of the array. Is this possible?

  Cheers for any help

  J

  Use 'Variant to data change' variant of an array of variant and take the importance of that.

  

  Ed.

  Opps missed the variable number of condition of dimensions, in this case, you want to "Format Picture" of OpenG as mentioned blawson.

• Unable to connect to my Blackberry smartphone to sync my contacts and calendar

  Original title; Unable to connect to my Blackberry smartphone

  Since the last Windows Update August 17, I can no longer connect my computer to my phone smart blackberry to sync my contacts and calendar

  Thanks for your help. I decided to check with my Blackberry service provider, and they were able to fix the problem by simply removing and then reinsert the cell phone battery while it was connected to my computer. The old trick 'the battery '. Never thought of that.

  Thanks again!

• 3/10/11: Vista update story reported that an update to the Blackberry smartphone failed to install. How can I get this update or at least know why it has not installed?

  Here are the associated error message.

  Research in Motion - other hardware - BlackBerry Smartphone

  Installation date: 10/04/2011 03:00

  Installation status: failed

  Error details: Code 800F020B

  Update type: recommended

  Research in Motion, another update of the software of hardware released in April 2008

  More information:

  http://winqual.Microsoft.com/support/?DriverID=20165724

  Help and Support:

  http://support.Microsoft.com/select/?target=hub

  Hello

  If Windows Update error 800f020b while trying to install updates, an update that you are trying to install applies to a device that is not connected to the computer. Make sure all your devices are connected and turned on, and then try to install updates again.

  Refer to this article for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800f020b

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I can not sincronize my Blackberry Desktop Manager with Windows Live. I get the message "unknown error reported" How turn off the connected BlackBerry smartphone advanced power management features

  I'm on resolution 5, I used four different resolutions and none of them work, and I do not understand how to apply the meanless 5. Resolution 5

  Turn off the connected BlackBerry smartphone advanced power management features. For more information about how to disable the USB selective suspend feature in Windows, visitMicrosoft Help and Support site and search for "disable usb selective suspend."

  See if http://support.microsoft.com/kb/902274 help
  --
  ..
  --
  "andresgn" wrote in message news: 9754 c 356-97ed-4b9f-8dc5-c3318a6dc60b...
  > I'm on resolution 5, I used four different and no resolutions are
  > work them, and I do not understand how to apply the meanless 5.
  > Resolution 5
  > Turn off the connected BlackBerry advanced power management features
  > smartphone. For more information about how to disable the selective USB
  > suspend functionality in Windows, see the Microsoft Help and Support site
  > and look for "disable usb selective suspend."
  >
   
   

• How can I get the Ip address of my Blackberry SmartPhone

  Hello

  How can I get the IP address of my Blackberry Smartphone?

  Thank you

  You can enter 'ip' in the search field, for example. I did it for you:

  http://supportforums.BlackBerry.com/T5/Java-development/WiFi-IP-address/m-p/374272#M70943

• BlackBerry SmartPhones that Support Themes

  Hello, I made a theme and made compatible with these BlackBerry SmartPhones:-1) "BOLD" 2) BOLD 9700) 3 BOLD 9650 9000 4) TORCH 9800 5) curve 6) CURVE 9300 8950 7) of the CURVE 8900 8) CURVE 8500 9) CURVE 8350 10) CURVE 8330) 11 TOUR 9600) 12 PEARL 9100) 13 STORM 9500 14) STYLE 9670 15) in PEARL 8100 16) PEARL Flip 8200 17) CURVE 8300 Series 18) 8800 I just wanted know there there any BlackBerry smartphones that support Themes? Thankx

  Basically in this link of the number model 8000 and higher, but not those of the OS 7.0 or higher.

  http://en.Wikipedia.org/wiki/List_of_BlackBerry_products#Consumer_models_.288000_-_9000_series.29

• Problem checking blackBerry Smartphones Whatsapp

  After you have installed whatsapp, I check my number starts with application whatsapp tried to connect inside and outside the firewall which is not allowed by your it policy.

  OK... Here are the steps that you need:

  • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  Beware of all the warnings, he said. Later, when you make your restore, don't do not restore basically this will just put it on your BB policy... rather a selective restore of only those databases that you absolutely need and especially leaving off anything to do with COMPUTING strategies:

  • KB03974 List of database for the blackBerry smartphone

  Good luck!

• Questions of blackBerry Smartphones PRIV

  How to transfer my contacts from my passport to the PRIV... and done it backs up data to cloud or software such as LINK?... Thank you!

  In addition, at the same time, mobile phone operator Telus to the Canada has published this Priv Simulator.

  http://TELUS.simulators.modeaondemand.com/en-CA/BlackBerry/smartphone/Priv/Android/lollipop/5.1.1/SI...

• BlackBerry Smartphones Blackberry not syncing with Gmail

  My Blackberry Bold 9900 stopped sync with Gmail. I only synchronize e-mail, contacts, or calendar. I mainly use Gmail site on my PC to read and delete emails. I have more than 70 unread e-mails on my Blackberry that were already deleted from the Gmail Web site. The option 'balance' has no effect. I can receive new Gmail on Blackberry messages, but if I have to 'Mark as read' or 'Clear' an email actions does not sync with the Gmail Web site. The same is true if I 'Mark as read' or 'Delete' an email on Gmail Web site. The actions are not synchronized with the Blackberry. I have 2 Android devices and a Windows Phone that syncs with Gmail without a problem. I just have the problem on my Blackberry.

  My device information:

  BlackBerry Bold 9900

  7.1 bundle 2435 (v7.1.0.862, platform 5.1.0.662)

  Reconciliation of BlackBerry e-mail settings:

  Delete on: mailbox & Pocket

  Wireless reconcile: checked

  On conflicts: mailbox WINS

  Gmail settings:

  Inbox, and garbage are included in IMAP feeds

  Also, I tried to delete Gmail from Blackberry account. When I did he told me he would remove all Gmail messages from the phone but it moved all the Gmail unread messages in my main mailbox. (I keep Gmail and Exchange separate emails on my Blackberry). It is also impossible to select multiple messages at the same time to remove if they are not in a consecutive order.

  Hello and welcome to the community!

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) Remove and return Service books

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then you should try remove and re-add your configurations for the relevant accounts. Otherwise, you should contact your mobile provider for formal support.

  Good luck!