Problem of brick wall: clusters, the size of the reference table

Similar Questions

• Building blocks in the reference table of contents page

  In the reference page for 8 FM to my OCD, I have this:

  < $chapnum >. < $paranum >: < $paratext > < $pagenum >

  The < $chapnum > section: < $paratext > < $pagenum >

  The < $chapnum > section: < $paratext > < $pagenum >

  After an update of the exit book TOC looks like this:

  Section 2: Concepts RTXLNET & characteristics

  Section 2: Organizing data

  2: day of the specifications

  Absent from the output is the second issue of the level of heading 3, for example the "." 1"in" 2.1: Date specifications. What is the correct Foundation? < $paranum > is apparently not correct.

  Thank you

  William

  <$paranumonly>gives you just the info of the meter.

  <$paranum>gives you everything in the AutoNumber field

• FM7.2: Problems with frame anchored in the rotated table cell

  Hello O Experts,

  I am facing a nasty problem with FrameMaker 7.2 for Windows with frames embedded in rotated table cells. I was wondering if any of you have seen this problem and know how to solve.

  The problem is reproduced as follows:

  1 create a table.

  2. Add a small frame anchored "the point insertion" inside one of the cells.

  3. Add a line of text to the anchored frame.

  4 turn the cell by 90 degrees clockwise or counterclockwise.

  Up to step 3, the anchored frame and the line of text behave as expected. Can I choose both the frame and the text line, move and resize. In all cases, they are displayed correctly.

  After step 4, the following occurs:

  • The content of the anchored image appear or is badly distorted.
  • Is no longer, I can select or resize the anchored frame (if I try, FM acts irregularly and wildly moves the outline around the page).
  • I can choose is no longer the line of text in the frame.

  I enclose a file FM (created using integrated model "portrait" of FM) sample that illustrates the problem.

  If someone knows this problem and I hope a solution, I would greatly appreciate it if you'd share. Thank you very much!

  Michael,

  If you turn just the anchored frame itself and not the cell (content) then everything behaves. If you have lots of content for the anchored frame, then place a block of text in the anchored frame, use a suitable paratag in text and only turn the framework anchored (all content will follow along then).

• HP S2031 20 "monitor I want to mount on the wall. What size screws to mount?

  I have a monitor HP S2031 I want to mount on the wall.  What size screws I put in the monitor to attach it to the media.

  Thank you!

  Sandy59

  The series of HP products that monitor your S2031 comes from States, "this monitor uses the compatible VESA 100 x 100 mm installation ports." This means that there should be 4 screw holes, square shaped, at the back of the monitor to 3-15/16 inch independently of the other. In the monitor screw holes should have metric threads ISO "M4" and are typically 10 mm deep. The appropriate screws (usually 10mm shorter or longer) are normally provided with the stand.

• Problems with Mail running under the Sierra

  Mail does not display / download (PDFs, etc) attachments in emails that are sent to my e-mail hotmail.com account. The correct size of the email received is indicated, but the ether attachments are not visible or are not complete. This problem occurs only with the emails that are sent tony hotmail account, another account of e-mail (gmail, web.de, mail etc.) are not affected by this problem. I already deleted the account and reinstalled, resynchronized the account, check the correct IMAP - settings, nothing worked. Now, I demoted via Time machine to El Capitan. Now, everything is shown correctly without attachments are missed under El Capitan. Because the time machine really not added some attachments I ve some files lost unfortunately! Very good performance! I really disappointed m from Apple!   Is there a solution for this problem?

  Often, with large attachments; I could not find a systematic reason I don't have a hotmail account, but just a normal IMAP account.

• Is there a possible solution to this age-old problem which graphics disappear when the browser window is resized?

  example: www.satlinker.de
  If the browser window is smaller than the content, the header image seems well.
  My css stylesheet looks like this:

  #banner {
   padding-left:10px;
   text-align: left;
   font-weight: bold;
   border: 1px solid #000;
   background: transparent url(/media/header.svg) top left no-repeat;
   height: 70px; /*workaround to adjust width*/
   -webkit-background-size:100% 100%;
   -moz-background-size:100% 100%;
   -o-background-size:100% 100%;
   background-size:100% 100%;
  }

  It has nothing to do with svg, similar problems with png images.
  In earlier versions, height adjustment worked as a workaround, but no more in vesion 17.
  There are various problems like the one described in the net:
  for example Bug 282558 - sized image vanishes on browser resize.
  But I can't find any solution - and this bug is described in 2005!

  I was wrong, it was a problem with the svg format. I tried several other formats, each doing its own problems. I tried cleaning the svg with conversion tools code and finally manually with a Publisher - nothing works. GIF and jpg of other problems, so finally I have found a converter of images to http://www.files-conversion.com/, which produces an acceptable png format.

  I think that the rendering of images needs to be improved.

• A problem with your computer prevents the VAC system. You can not play on secure servers.

  Hello

  I have a same problem of the nomination and please help me. Steam gives me this error: https://support.steampowered.com/kb_article.php?ref=2117-ILZV-2837 followed all the steps and the problem is solved just at the moment 24 hours Max tried to change the Windows 8.1 Professional with the company 8.1 of Windows and the same error... at last, I found what the PROBLEM... Steam do conflict with the killer e2200 controller Gigabit Ethernet (NDIS 6 h 30) .

  Here is the spec of my laptop:

  Processor information:
  Vendor: GenuineIntel
  Processor family: 0x6
  CPU Model: 0x3c
  CPU Stepping: 0 x 3
  Processor type: 0x0
  Speed: 2494 Mhz
  8 logical processors
  4 physical processors
  HyperThreading: support
  FCMOV: supported
  SSE2: support
  SSE3: support
  SSSE3: support
  SSE4a: unsupported
  SSE41: supported
  SSE42: supported
      
  Network information:
  Network speed:
      
  Version of the operating system:
  Windows 8.1 (64-bit)
  NTFS: support
  Crypto Provider codes: supported 311 0 x 0 0 x 0 0 x 0
      
  Video card:
  Driver: NVIDIA GeForce GTX 860M

  The DirectX driver name: nvumdshim.dll
  Driver version: 9.18.13.4752
  The DirectX driver version: 9.18.13.4752
  Driver date: February 5, 2015
  OpenGL Version: 4.5
  DirectX card: NVIDIA GeForce GTX 860M
  VendorID: 0x10de
  Device ID: 0x119a
  Number of monitors: 1
  Number of logical video cards: 1
  No SLI or Crossfire detected
  The main screen resolution: 1920 x 1080
  Resolution: 1920 x 1080
  Main display size: 15.04 "x 8.46" (17,24 "diag)
  38.2 cm x 21,5 cm (43.8 cm diag)
  Main bus: PCI Express x 16
  Primary VRAM: 2047 MB
  Supported MSAA modes: 2 x 4 x 8 x
      
  Sound card:
  Audio: speakers (Logitech G35 Headset)
      
  Memory:
  RAM: Mb 16265
      
  Various:
  INTERFACE language: English
  Microphone: Not defined
  Media type: DVD
  Total disk space: 310220 MB
  More great free block on the hard disk: Mb 234051
  Date of installation of the OS: January 1, 1970
  Game controller: none is detected
      
  Software installed:
  Advanced SystemCare Ultimate 8
  Alienware command center
  Alienware on-screen display
  Hello
  Counter-strike: Global Offensive
  Dolby Digital Plus Home Theater
  EMSB
  Game Booster 3
  Google Chrome
  Update Google Helper
  Intel® Trusted Connect Customer Service
  Intel (r) components engine management
  Intel (r) graphics processor
  Intel(r) Rapid Storage Technology
  Intel (r) Wireless Bluetooth (R) (patch version 17.1.1449.356)
  IObit Uninstaller
  KMSpico v9.3.3
  Logitech Gaming Software
  Logitech Gaming Software 8,57
  Microsoft Visual C++ 2010 Redistributable - 10.0.40219 64 x
  Microsoft Visual C++ 2010 x 86 Redistributable - 10.0.40219
  Microsoft Visual C++ Redistributable (x 64) 2012 - 11.0.61030
  Microsoft Visual C++ Redistributable (x 86) 2012 - 11.0.50727
  Microsoft Visual C++ 2012 x 64 extra TIME - 11.0.61030
  Microsoft Visual C++ 2012 x 64 minimum - 11.0.61030
  Microsoft Visual C++ 2012 x 86 additional TIME - 11.0.50727
  Microsoft Visual C++ 2012 x 86 minimum - 11.0.50727
  NVIDIA 3D Vision Driver 347.52
  347.52 NVIDIA Control Panel
  NVIDIA GeForce experience 2.2.2
  NVIDIA GeForce experience Service
  NVIDIA Graphics Driver 347.52
  NVIDIA HD Audio Driver 1.3.33.0
  NVIDIA installation application
  NVIDIA LED Visualizer 1.0
  NVIDIA network service
  Optimus NVIDIA 17.12.8 update
  NVIDIA PhysX
  NVIDIA PhysX System Software 9.14.0702
  ShadowPlay NVIDIA 17.12.8
  NVIDIA Stereoscopic 3D Driver
  Update NVIDIA 17.12.8
  Updated NVIDIA
  NVIDIA 1.2.27 Audio virtual
  Overwolf
  Qualcomm-Atheros bandwidth control filter driver
  Qualcomm Atheros E220x killer drivers
  Qualcomm-Atheros Killer Network Manager Suite
  Qualcomm-Atheros Network Manager
  Realtek card reader
  Realtek High Definition Audio Driver
  SHIELD streaming
  SHIELD wireless controller driver
  ST Microelectronics 3-axis digital accelerometer Solution
  Start 8 menu
  Steam
  Surf protection
  Synaptics Pointing Device Driver
  TeamSpeak 3 Client
  5.21 WinRAR (64-bit)

  When I try to attach cs'a go with my ping wireless network is 200-250 :(((

  Please help me

  Thank you!!!

  Hello. I made this account just to meet you. I tried all the solutions, but my problem was solved after I uninstalled "iobit start menu 8 and iobit advanced system care ' completely and restart my computer. However, I'm also using Killer e2200 controller Gigabit Ethernet (NDIS 6.30) on my pc.

  Can you reinstall the driver of e-network killer and all iobit software uninstall your PC and tell me if your problem is solved? I will wait for your answer. Thank you.

• AP1131 - of-Authenticationing problem - problem users did not get the IP

  Users connected to the AP1131G cannot get DHCP!

  Hi all

  I hope that we can find a solution for my problem.

  I have access point AIR-AP1131G-E-K9 and connected to the switch 2960, under port configuration is:

  interface F0/24

  switchport mode access

  switchport access vlan 63

  switchport voice vlan 62

  !

  !

  I configured on it two SSID, on for users and the other for the voice that is hidden.

  The SSID security user.

  but the voice SSID has no security restrictions.

  (The main problem is any user to connect to AP1131G, he or she cannot get the IP via DHCP, but voice can get DHCP and connected normally)

  -Configuring AP-

  Admin-AP1 #sh run

  Building configuration...

  Current configuration: 2462 bytes

  !

  version 12.4

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  encryption password service

  !

  hostname Admin-AP1

  !

  enable secret 5 iL05 $1$ $ CMki6n7Twwea0QLL58oCg0

  !

  No aaa new-model

  !

  resources policy

  !

  IP subnet zero

  !

  !

  !

  SSID dot11 HW-Admin-AP1

  VLAN 63

  open authentication

  Comments-mode

  MBSSID-guest mode

  !

  dot11 ssid voip

  VLAN 62

  open authentication

  !

  diet pre-standard trading online

  !

  !

  123A0C041104 Cisco 7 password username

  !

  Bridge IRB

  !

  !

  interface Dot11Radio0

  no ip address

  no ip route cache

  !

  VLAN 63 key 1 size 40 bit 7 589074CFA6CD transmit encryption keys

  encryption vlan 63 compulsory wep mode

  !

  VLAN 62 key 1 size 40 bit 7 76B3B1F212E9 transmit encryption keys

  encryption vlan 62 mandatory wep mode

  !

  SSID HW-Admin-AP1

  !

  SSID voip

  !

  MBSSID

  root of station-role

  Bridge-Group 1

  Bridge-Group 1 block-unknown-source

  No source of bridge-Group 1-learning

  unicast bridge-Group 1-floods

  Bridge-Group 1 covering-disabled people

  !

  interface Dot11Radio0.62

  encapsulation dot1Q 62

  no ip route cache

  no link-status of snmp trap

  Bridge-group 62

  Bridge-group subscriber-loop-control 62

  Bridge-group 62 block-unknown-source

  No source of bridge-group 62-learning

  No bridge group 62 unicast-flooding

  Bridge-group 62 covering people with reduced mobility

  !

  interface Dot11Radio0.63

  encapsulation dot1Q 63

  no ip route cache

  no link-status of snmp trap

  Bridge-group 63

  Bridge-group subscriber-loop-control 63

  Bridge-group 63 block-unknown-source

  No source of bridge-group 63-learning

  No bridge group 63 unicast-flooding

  Bridge-group 63 covering people with reduced mobility

  !

  interface FastEthernet0

  no ip address

  no ip route cache

  automatic duplex

  automatic speed

  Bridge-Group 1

  No source of bridge-Group 1-learning

  Bridge-Group 1 covering-disabled people

  !

  interface FastEthernet0.62

  encapsulation dot1Q 62

  no ip route cache

  no link-status of snmp trap

  Bridge-group 62

  No source of bridge-group 62-learning

  !

  interface FastEthernet0.63

  encapsulation dot1Q 63

  no ip route cache

  no link-status of snmp trap

  Bridge-group 63

  No source of bridge-group 63-learning

  !

  interface BVI1

  IP 172.18.63.2 255.255.255.0

  no ip route cache

  !

  default IP gateway - 172.18.63.1

  IP http server

  no ip http secure server

  IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

  1 channel ip bridge

  !

  !

  !

  Line con 0

  password 7 1101180B1632595C557A

  line vty 0 4

  password 7 09444F07182545425A5C

  Synchronous recording

  opening of session

  !

  end

  -----------------------------------------------------

  I would like to know what is the problem for my setup? If there is a problem?

  I need to know why he doesn't connect as voice phones works normally and get IP via DHCP addresses.

  I would like to mention here that the source DHCP for the two vlan is same source (Core) and here it is the configuration in this topic.

  DHCP excluded-address IP 172.18.63.1 172.18.63.50

  !

  H-VLAN-wireless dhcp IP pool

  network 172.18.63.0 255.255.255.0

  DNS-server 172.18.11.16 172.18.11.18

  domain hw.net

  router by default - 172.18.63.1

  !

  pool IP dhcp H-VLAN-Users

  network 172.18.61.0 255.255.255.0

  router by default - 172.18.61.10

  DNS-server 172.18.11.16 172.18.11.18

  domain hw.net

  -172.18.11.18 NetBIOS name server

  !

  !

  ----------------------------------------------------------

  If anyone can help me how to troublehsoot this problem and how to determine the problem.

  Hello

  Change the Switchport Trunk conifig...

  On the SWITCH

  ============

  int fa 0/24

  switchport trunk dot1Q encap

  switchport mode trunk

  switchiport trunk vlan native 63

  No tap

  end

  Access point

  =========

  conf t

  interface Dot11Radio0.63

  63 native encapsulation dot1Q

  Bridge-Group 1

  end

  conf t

  int fa 0.63

  dotQ native 63 encap

  Bridge-Group 1

  end

  That will do it for you! Let me know if this answers your question!

  Please do not forget to note the useful messages!

• Problem definition complex join in the physical layer

  I have a problem with the definition of a complex join in the physical layer.
  
  I have the following two tables:
  
  DIM_ORG
  Id_Org
  DT_Start
  DT_End
  Nom_org
  
  FACT_REV
  Id_org
  Recipes
  
  The tabel DIM_ORG is type 2 SCD. The current/active nom_org can be identified in the table because DT_End will be empty.
  
  Using the expression builder to configure the physical join I have entered the following expression:
  
  DIM_ORG. Id_Org = FACT_REV. Id_Org AND DIM_ORG. DT_End is null
  
  The expression builder accepts the syntax, but when I want to close the physical foreign key window I get the message:
  
  [nQSError: 30001] Only the columns, designated operators and predicates are allowed.
  
  Any suggestions how to solve this problem? Am just missing something? All I want to do is set up a join to pick up the active nom_org of my size.
  
  Thanks for your help!

  Make a foreign key in the physical layer:
  DIM_ORG. Id_Org = FACT_REV. Id_Org

  In the MDB, set the logical table org dim source/content in tab/where a part:
  DIM_ORG. DT_End is null

  Concerning
  Goran
  http://108obiee.blogspot.com

• Problem adding email address to the site 'Manage your Apple ID'

  I want to add my XYZ e-mail address in the section "reachable to the ' site ' manage your Apple ID. However, I get the following message: "this e-mail address is already in use with another apple ID".

  Note that I have my email set up as my 'rescue email' XYZ on my site ' manage your Apple ID ".

  Could it be the cause of the problem? In other words, the rescue email CAN NOT be used in the section "can be reached to the?

  If it's NOT a problem, then why am I allowed to use my e-mail XYZ as my 'rescue email' address for my Apple ID site, even if he uses another apple ID!

  How can I know what another apple what ID?

  Very confusing to say the least...

  Furthermore, I tried to find a community called 'Apple ID' or 'Messages' of this post "help message" but couldn't find it. "FaceTime" is the closest to what I'm looking for. Please redirect me to the appropriate site if necessary. Thank you!

  Hello Michael,

  Thank you for using communities of Apple support.

  I see you are trying to add an additional email address to your Apple ID. If you already have an address assigned as your email of relief, that is probably why you can't add it as an additional e-mail address. See this support article for more information about Apple ID addresses: on your Apple ID email addresses

  If you want to change the emails, you can replace the recovery email address and use it as an additional e-mail address.

  Best regards.

• 27 "2013 mac only shut down using the power button / stop, is this a problem or a part of the new system

  After my upgrade that Mac is not closed by using the drop-down menu option, it also seems to crash the finder.  Finder raises with force quit.  I can only shut it down using the power button.  Is this a bug/problem of a part of the El Capitan?

  Wacom tablet software is known to cause this problem. Options:

  Uninstalling the Wacom software

  Completely and remove items from connection

  The Wacom driver update

• I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• Hi, I have a problem to download apps on the AppStore. When I download the application, it remains blank

  Hi, I have a problem to download apps on the AppStore. When I download the application, it remains blank

  Force restart of your iPhone, then try again.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

• I have the problem that whenever I open the browser, all content are concentrated to the right. Every time when I want to fix I have to open a new tab. What can I do permanently fix this?

  www.basspics.be/firefox02.PNG
  www.basspics.be/firefox01.PNG

  This problem may be caused by the extension of the toolbar of Babylon 1.1.8

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  All calendars are enabled in the sidebar?