BrightView LED display

Similar Questions

• Satellite A500 - how to change the LED display?

  Hey.

  Does anyone have guide how to change the display LED of Toshiba Satellite a500?
  I tried irisvista.com but there is only a guide how to replace an optical drive in this model, but nothing on the screen.

  Thank you.

  Don t always start a new thread on the same topic.
  Please follow the firstto:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53875

• Help reading LED display

  Hello

  I use IMAQ to read the number displayed on a LED screen. I built a program based on the example of reading LCD and another one based on the example of the OCR, but unfortunately none were a success

  I must be missing something here and any help would be really appreciated.

  I enclose files and an example of the screen image.

  Thank you

  Thank you all for the quick support.

  The best way I knew to solve this problem using the OCR and the characters of the training. EvenMore, I had to make a return on investment for each number and only recognize.

  My problem is solved basically so far

  Thanks again

• LED display flashes worrisome with a lower brightness

  Dear members,

  I recently bought a laptop, Lenovo G550L with a view model backlit by LED BOEHydis HT156WXB-100 (according to 5.02 by Lavalys Everest). I'm unhappy with the computer itself, but there is one thing that really gives me a hard time. If I adjust the brightness of the backlight to one level other than maximum, it controls the brightness of the LED backlight clearly using Pulse-Width Modulation at very low frequencies according to the desired brightness. If I want to spare or on a dark night, I always turn down or its brightness is blinding kind of my eyes, at the same time these low frequencies with PWM causes my eyes to strain and sometimes I feel moderate headaches on the side. I am looking for a solution change the method of my LED blacklight or increase the PWM frequency.

  I tried to address BOEHydis (now Hydis) with the problem by e-mail. BOE quoted me a representative Hydis, who wrote me that BOEHydis coexist more. With his help I was able to find the new website of the BOE and found this product on it. I them send a letter too, but haven't gotten a response yet.

  The screen itself appears in Windows (XP, SP3) device as a standard Plug-and-Play monitorManager. My question is who is at - it software (or the same material) solution or a Advanced other driver for this type of screen that I can increase the PWM frequency or alter somehow brightness adjustment method?

  Thanks in advance,

  str4ngS

  Contact lenovo hotline and ask for the replacement of the lcd screen.

  (I know that some lcd displays may have a similar problem you have)

• My new ViewSonic LED displays 'signal' when it is plugged

  I recently bought a ViewSonic LED monitor from amazon (option to come back, would rather try to fix first) and it is supposed to be the second monitor. I have my operating system and went to plug the new viewsonic, I now have almost identical 2, the first is an older version, and he gets that "No Signal" then goes to the mode 'sleep'.

  I thought at first maybe its my cables, so I tried the DVI and VGA, it came with and none worked. Then I thought well okay maybe it's of monitor cables, so I disconnected work currently and only used the DVI giving me a display on the current screen. This solution does not work, and I did the same thing with the VGA to see if it would work on the old monitor, which it did, so I tried on the new monitor and without success.

  After that idea, I decided to look at the display settings and when it's plugged the computer recognizes a second screen, but when I select the '2' or second monitor in the settings it greys the option to select it as the main display. Any option to display, I chose it still shows nothing on the new monitor, nor the premiera she acts as if there is more space for work (the mouse let not the current monitor even if I apply the changes. I went to the display settings after I realized that wake up the monitor and look for a signal when I was in him in reconnecting with the DVI or VGA, but it's just never to find the signal.

  My last attempt to see what is going on on what was going on with the monitor has been plugging the same VGA cable that I have been using the monitor in my laptop... BOOM he got the signal, so I said OK well well it must be good. I used the same computer port that gives me a signal on the old monitor and connected to the screen with the same cable that I used with the laptop and nothing. No signal... I'm lost, the only thing I know that I have not tried yet is a HDMI which is my next step but I'm completely lost as to how 1 viewsonic can receive a signal and the new cannot but plug it into a computer laptop and we're ready to go.

  Please help, I'm willing to try all that, I'll send amazon rear t and try a new, but since it turn on with the laptop (not where I want to use it) I thought I could do something wrong.

  Thanks for the input, Niranjan, I appreciate the help and time.

  Just to let you know, I was about to try this, the arrival of my display to VGA Converter, shaped port, it was my last ditch to plug and play. Of course the screen broke on.

  Thanks again for the advice and taking time out of your day to help.

  Have a great weekend.

• Satellite Pro L10 will feed no, no LED display

  My satellite pro L10 has suddenly stoped working .There seems to be no power "." No leds work by battery or sector.
  can someone help?
  CJ

  Hello

  I recommend first of all check the power adapter and the battery functionality.
  But it s very unusual that these two parts are dead at the same time. So I think that has to be something wrong on the motherboard.
  Unfortunately, it is not easy to say what's wrong without any detailed Diagnostics.

  Therefore, you should ask the ASP to support that in the post above suggested.

• Display (LED display)

  Perhaps someone knows if exist in Labview and addons that will show you the result (as meters) on LED screen as shown in picture...

  

  Thank you

  Perhaps you could download a font of LED here. I have not tested it myself

  http://digital.NI.com/public.nsf/allkb/5DCD38A1D020155386256DA9007DF506

  http://www.dafont.com/theme.php?cat=302

• EOS Rebel T3 Led display has two lines black and white grainy to and controls are frozen help

  When the unit is powered on any of the controls development works and the LED screen has only black and white grainy lines above. Tried to remove the battery to restart made no difference. If you have an idea of what happens to your help would be appreciated a lot.

  Did you drop or wet?  Call the Canon Service.

  BTW, the battery must be removed to reset the camera like this for a week or two.

• Replacement screen

  Hello. I am a missionary in the Kenya, and I try to help another missionary to get a replacement screen for their g6-1108EI Pavilion laptop. We have not been able to locate one, but I found screens for the 1108TX and 1108TU models. One of these screens would be compatible with the 1108EI model?

  Thank you.

  Orgeuillit

  pastorforbe wrote:

  Hello. I am a missionary in the Kenya, and I try to help another missionary to get a replacement screen for their g6-1108EI Pavilion laptop. We have not been able to locate one, but I found screens for the 1108TX and 1108TU models. One of these screens would be compatible with the 1108EI model?

  Thank you.

  Orgeuillit

  Through the 24 Page in this manual

  HP part number of 39.6 cm (15.6 in) high definition BrightView LED display panel -647623-001

  Both 1108TU & 1108EI has the same block display & sous-composants, and the part number is the same.

  You can order the HP part for replacement.

  HP PartSurfer

  Online store:

  Amazon

  Concerning

  Visruth

• Broken LCD, replacement necessary manufacturer

  I broke the screen on my Compaq Presario CQ60 215DX.

  It's a "15.6' HD BrightView LED display 1366 x 768"

  What is the replacement of the manufacturer for this screen please?

  Thank you!

  Hello

  You may need more than just the screen. Please use the following manual to find the right parts for your machine:

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  Good luck.

• can I upgrade my cpu?

  Hi, I have a hp pavilion touchsmart 15-b149ca and I was wondering if I could upgrade my CPU, im new to all this, I was wondering if I could spend my cpu so I can play games on my laptop if possible. The game I wanted to play, said the recommended processor is an Intel Core 2 Quad 2.4 GHz or an AMD Phenom X 3 2.1 GHz. (can you please tell me if I can go to a processor even better? (Thank you!) Thank you once again!

  My computer specs:

  -15.6 "HD diagonal brightview LED display

  -Hard drive 640 GB

  -4096 MB DDR3 SDRAM

  -WLAN & BLUETOOTH

  -Processor AMD Dual-Core A4 - 4355 accelerated M

  -Windows 8

  Hello

  in my opinion, replacing the motherboard (with CPU) can cost you as much as a new PC so not to show up thinking even to replace this part. In addition, you don't get enough guarantee for the spare parts for this amount.

  If you really need to upgrade, you might like by examining a new PC itself.

• upgrade for HP probook 4540 laptop screen s full HD

  I am a designer. I have laptop Hp probook 4540 s with the 15.6 "diagonal high-definition HP BrightView LED display (1366 x 768). can I upgrade my screen the 15.6 "diagonal screen Full HD HP anti-glare LED (1920 x 1080)?

  My screen: model number: B156XW02 V.3

  UA: Optronics

  H/W: 0 B

  F/W: 1

  If you could, please guide me.

  Hello

  Yes, material is normally progressive (open end) but we must take into account cost, risk (not same provider) and performance. You can try.

  Good luck.

• LED 24 "Cinema Display issues

  Hello

  my old Apple Cinema Display Monitor broke and I think I used ('excellent condition') 24 "LED Cinema Display (white folder).  My questions are:

  1 - is it compatible with my computer of MacPro5.1 Tower?  My computer has a DVI and 2-port MiniDisplay, but everywhere I've read so far he says that the LED 24 "is made for MacBooks and other laptops.

  2 - How do people like the LED display for FCP editing.  It has a glossy finish.  My old screen has a matte finish.

  Thanks for your comments.

  -Eve

  As you know DVI is a video standard, as well as the USB connection or any other connection, as long as your device (MacPro) and the monitor (screen cinema) has the same DVI ports, they work perfectly, in fact you can even connect your Cinema Display to a Windows PC since DVI is a standard.

• ZR2240w display: LCD IPS LED or TFT?

  Hello. I'm considering the purchase of two HP ZR 2240w poster but I find conflicting information on this display model. In most of the information provided in the HP Web sites this display appears as a screen technology IPS LED but when I download the guide of the user on the site of HP, the specifications page shows the display as having facilitated TFT LCD. I'm not an expert, but I think they are different technologies.

  I contacted HP pre-sales support that was not prepared to help. I have also contacted HP chat support that claim not to have the tools to help me. Can someone clear this up for me?

  Thank you.

  P.S.This thread has been moved from Macintosh compatible products for monitor-HP Forums Moderat

  TFT LCD is the block of building modern flat-screen basis. It is based on a liquid crystal display using transistors in thin film deposited on a glass substrate. These transistors are switching of liquid crystals that either allows the light to pass or block light to pass through the liquid crystals. Light is produced by the CRTS or the leds and it goes through red, green and blue filters that are sitting on each pixel of void. In this way the display can create color.

  There are different types of screens LCD TFT, TN (twisted numatics) is commonly used by players as it passes very fast power pixels, so there is little or no ghosting, IPS (In Plane Switching) is commonly used where angles with wide vision accurate colors are more important than the switching speed (ghosting).

  Thus, calling something a TFT LCD screen is always accurate. An LCD IPS the call display something is even more specific that the TFT LCD display type is specified. Say that a display uses IPS LED technology is also more accurate that you specify the TFT LCD technology and lighting technology.

  But calling something a LED screen is not exactly true that the current state of the display technology means we are really talking a TFT LCD screen with backlight LED and not individual RGB LED that comprise the sub-pixels in a display. A true LED display is a legacy emissive subpixels emerge from the colorful light, rather than having a low glow similar to colorful shutters something light.  When you hear LED poster today, consider that there marketing speak for TFT LCD display with LED backlighting

  If you are interested, the TFT LCD wiki can probably explain more about the technology that I can always hope.

  So back to the ZR2240, if the specifications say the display uses IPS LED technology, it must have good angles of vision and color reproduction and using of LED backlight it will use much less energy, so cold to the touch. (Compare this to my Dell U2711 is a panel IPS 27 "and using cathode ray tubes, so it becomes very hot and uncomfortable when you're sitting in front of two of these monitors for long periods).

  Also, the fact that the user guide indicates that the TFT LCD is without real consequence in the present document focuses more on the cable to the top and use the monitor, which is always a TFT LCD after all, that of property to specify the type and the capacity of this TFT LCD IPS monitor that uses LED backlighting.

• Pavilion 15: upgrade the display panel

  You have a hardware issue.

  I bought a laptop HP Pavilion 15 - HP Pavilion 15 p051sq (ENERGY STAR) (J7U16EA) - last year and he has a very good hardware configuration

  Intel® Core™ i5-4210U, 1.7 GHz, 3 MB cache, 2 cores CPU with integrated video Intel HD 4400.

  8 GB SDRAM DDR3L, 1600 MHz (1 x 8 GB),

  HARD drive: 1 TB 5400 RPM SATA.

  LED bright HD BrightView 15.6 "display in maximum resolution of 1366 x 768,

  NVIDIA GeForce GT 840 M (2 GB dedicated DDR3).

  As you may have noticed, my question is the ugly resolution there is this Panel of HP laptop: led display 15.6 '' HD BrightView to 1366 x 768 max.

  Can someone suggest a replacement with higher resolution Panel?

  Energy consumption is not an issue here, as the laptop only stays at home in the area.

  Alternatively, can anyone suggest how to contact HP by telephone or to recommend a contact HP support, I can call for directions to solve this?

  Hi there @CosminT 
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you're looking to replace or update the display on your portable computer. I'm happy to help you with this.

  I understand the owner's manual as a reference, because it shows the replacement components supported for the series of laptops.

  HP laptop Pavilion 17 Notebook PC HP Pavilion 15 PC - Maintenance and Service Guide

  In this guide, you will find the following options available for 15.6 "screens which the third party only has a capacity of higher resolution:

  15.6 "HD WLED BrightView (1366 x 768) flat (3.6 mm) SVA (for nontouch SKU only) available for Windows 8.1 and Windows 7
  

  15.6 "HD WLED (1366 x 768) anti-glare flat (3.8 mm) SVA (for touch SKU only)
  

  15.6 "FHD WLED anti-glare (1920 x 1080) slim (3.2 mm) SVA (for both no touch & touch SKU)

  Another option would be to use an external monitor with your laptop, as in this case you can use any resolution that display the external supports and the graphic card of your laptop is capable of.

  If you want to talk to a support agent, you can call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.