Broadcom 802.11n network adapter does not work

Similar Questions

• HP dv6-6c10us: HP dv6-6c10us Broadcom 802.11n wireless adapter does not work after windows 10 installed

  I have a laptop HP dv6-6c10us with a Broadcom 802.11n wireless adapter.  It worked fine on Win 7.  When I upgraded to win 10, it has stopped working.  The driver has not been updated since 06/02/13.

  Until the driver is updated by Broadcom or HP, this computer is now a desktop computer.

  Any suggestions on how to get the adapter wireless on Windows 10?

  I recommend you to go back and do a system restore to a point before started to install the automatic updates, and where worked the wireless.

  Then download this tool that stops updates to install automatically.

  https://support.Microsoft.com/en-us/KB/3073930

  Hide all of them and then install one by one until you find the one that is to destroy the wireless connection.

  When you have found the culprit just hide it again and it will not be installed.

  You can create a system restore point each time you install an update.

  Tedious, but you should get where you want to be.

• Satellite L50-B-1DZ - wireless network adapter does not work

  So, my network wireless adapter completely stopped working. 2 days ago I couldn't connect to networks wirelessly without problem (although I've disconnected and will need to run the troubleshooter every few hours to reset it...), but yesterday I started to get the message "not connected - no connection is available. In broadcom 802.11n network adapter in Device Manager, the icon has a yellow warning symbol and the error message "this device cannot start. Code 10 ".

  I tried to update the drivers, but it gives just the same error message. I also tried to do a restore of the system since a week ago, but it has not fixed either.

  I found a youtube video that said that the problem can be caused by a software conflict and change value from registry, but that no longer works, and now I'm full of ideas.

  How have you tried to update the driver WLan?
  Have you tried to uninstall the driver first, and then after reboot again to install the new driver downloaded from Toshiba UE driver page?

  Try it!

  You said you reset the system in the past?
  How? Have you used the Toshiba recovery procedure and have you installed already preinstalled system once more?

• HP Pavillion 500PC series - lack of Broadcom 802.11n network adapter

  Hello

  I'm a newbie on this forum. I have gotHP Pavilion 500PC series, Windows 8 operating system, SN [personal information deleted]
  . There's a probem with low internet connection. Apparently, they say that the broadcom 802.11n network adapter is missing or damaged. Could you please help me solve this problem? Thank you.

  Kind Regads,

  Ririn

  Hi semarang

  Thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information. Our Participation rules:
  
  Protect privacy - yours and others. Do not share something about yourself that you do not want to see on a billboard on the road. Do not post contact or other personal information - your own or someone of another--or of any content that you receive in communications one without the consent of the author. For example, do not post your n ° of series or publicly coordinated computer and not let someone you don't know to take control of your computer remotely.
  
  If you need people to contact you directly, or ask them to send you a private message, or subscribe to the discussion then you will be notified when there are replies. You can also click on your name anywhere in the forum and will take you to your profile page, where you can find a list of threads, that you participated.
  
  Sharing personal addresses, telephone numbers and family names not suitable for your safety. If you have any questions, feel free to send me a private message in response.
  
  Thank you

  Omar

• Pavilion dm4-1006tu: 5 GHz in Broadcom 802.11n network adapter support

  Hello

  Broadcom 802.11n network adapter has dual band support? (2.4 GHz and 5 GHz)

  Command prompt provides these details:

  C:\ >netsh wlan show drivers

  Name of the interface: Wi - Fi

  Driver: Broadcom 802.11n Network adapt
  Version: 6.30.223.256
  INF file: C:\Windows\INF\netbc64.inf
  
  C:\Windows\system32\DRIVERS\BCMWL63a.sys
  C:\Windows\system32\DRIVERS\vwifibus.sys
  Type: Wi - Fi Native Driver
  Radio types supported: 802.11n 802. 11 a 802.11 g, 802. 11 b

  Thank you

  @Annshul,

  Hello and thanks for the display on the HP support forums.  Here is a link to your laptops manuals.  All specifications can be found on this page.

  HP Pavilion dm4-1006tu Entertainment Notebook PC - manual

  You will find all the answers to your specifications of systems.

  Thanks again for posting and have a great day.

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Broadcom 802.11n network adapter (code 10) does not. grrrr!

  After getting a virus and my computer reset everything (with help) and install my drivers and utilities provided by Dell, Broadcom 802.11n Natwork adapter came with a yellow warning triangle and when I look at properties says device cannot start (code 10) I tried searching for uninstalling and reainstalling solutions and internet usage and have gotten nowhere do you know a solution?

  Hello

  -What is the brand and model of the computer?

  I would suggest trying the following methods and check if it helps.

  Method 1: Run the network troubleshooter utility.
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: follow the instructions section below.
  http://support.Microsoft.com/kb/943104

  Hope this information is useful.

• Qosmio G50 802.11n enabled but does not work properly

  Hello

  I get a new Qosmio G50 on Christmas and now I have a little problem. I use a draft N of D-link access point and I want to use 802.11n mode with my qosmio. But I have some problems with it. I activated the 802.11n mode in the peripheral band Manager and channelbandwidth 2.4 & 5.2 are both set to "auto". But I don't get the 300mbps, 60mbps is what I get. My father has a portable computer from a different manufacture with also a 802.11n wireless card but not Intel and other mobile, I get the 300mbps! I put books together in the same room, the other get the qosmio 300mbps varies from 1 to 81mbps or more.

  -Does anyone know what goes wrong or what I need to change something in the Device Manager? I heard that many other intel WiFi 5100 owners also do not receive the speed of 300mbps.

  can someone help me?

  Greetz

  Have you tried turning off modes of 802.11g/b/a by assigning "802.11n only?

  Access device wireless LAN settings in Device Manager to change these settings.

  Remember not that 300Mpbs speed signal. Actual data transfer speed (less overhead) is less than 100 Mbps

• Pavilion dv6 LY090UA #ABC: I reinstalled Windows 7 and my wireless network adapter does not work

  I just reinstalled windows 7 and I can not get my work a wireless adapter. I went in all directions looking for drivers to use and everyone I try does not work.

  I tried:

  Atheros Wireless LAN Driver 2011

  I saw someone talking about DriveTheLife in another forum and decided to try it.

  IT WORKS LIKE MAGIC, I don't know how he did it but he found and installed all the drivers I needed!

• DX2460 network adapter does not work

  Gentlemen:

  It's a whole new machine, but it did not come with a driver disk, HP Compaq DX 2460.

  Anyone know the name of the network adapter or where I can get a driver that works?

  Thanks - rev

  Hello

  Here is a link to download for your desktop DX2460 page, select your operating system and download and install the driver.

• Wireless network adapter does not work anymore and will not be repeated work without stopping the computer and then back on.

  Sometimes I leave my computer on at night.  Sometimes I notice that when I get back to him the next day that he has limited connection to the network I use.  When I try to disconnect it from the network, then reconnect, it says that it cannot connect.  Then, when I try to restart my computer it is sitting at a screen saying "stop down". "."  My wireless network software also is unaccessable in which she does not open and if I close the Task Manager and reopen it flashes for a second then closes.

  However when I turn it on manually and then turn it on again, which apparently is not good for the computer, I am once again able to connect to the network with full access.

  Can someone please tell me why this keeps happening and how to fix it?

  original title: unable to connect to a network.

  Hello

  Are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode with networking

  Start your computer in safe mode with network and verify that the question.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode with network, then put your computer in a clean boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  Update the NIC drivers and check the issue.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 3:

  Run a virus scan and make sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  I hope this helps.

• Network adapter does not work

  How to replace the network adapter for model p6370t, Nr AZ210AV, professional Window 7 operating system? It stop working after a power surge caused by a nearby lightning strike.  It seems that this was the only damage. I can get on the internet with a wireless adapter and router. I would use a wired connection.

  You will need to purchase a PCI Express x 1 network adapter to install in one of the slots on your motherboard.

  Tere are a number available on this web document at NewEgg.com. Also, you should be able to find one at any local PC or electronics store.

• Network adapter does not work after upgrade to Windows Vista Black edition

  Help, please

  I use to have windows vista and now I upgrade to windows vista Black edition.__i guess my network adaptar said corrupted__it network adaptar must be reinstalled .__i don't know where should I reinstall the driver__

  Microsoft does NOT Support Vista Black Editions.

  You will need to request support for Vista Black Edition where you have obtained/downloaded from.

  See you soon.

  Mick Murphy - Microsoft partner

• Irregular connectivity - ACER 7551. Windows 7; 64 bit. Broadcom 802.11n network adapter

  and Microsoft virtual WiFi miniport adapt.

  Netgear wireless WEP encryption.

  I have a DELL Inspiron with NO QUESTIONS through Win 7 the same router.

  ACER aspire unpredictable will escape and does not connect at all.

  The troubleshooter for WINDOWS currently deducted "your modem broadband has connectivity problems. Reset your broadband.

  On other occasions, troubleshooting has solved the problem.  This happens probably once a day.

  Seems illogical that the modem would only allow a computer through the router?

  Of course, I rebooted.

  Any suggestions?

  Thanks for your swift suggestion.  During this time, I did a restore to a point several weeks ago.  Then I got an error message that NORTON was corrupt. So I did an UNINSTALL of NORTON (need to go to their Web site - could not just use Uninstall WIN from the control panel settings). Then a reinstall.

  My connection is OK today. I'll see how long I can go without problem before returning to your suggestion on the pilot.

• NETWORK adapter does not work after upgrade

  Hello

  I have two identical servers, HP ML350 G6, with an additional NIC from Intel (82574L).

  The first server running 4.0 and I upgraded to 5.0 without any problem.

  The other server was running 4.1 so I thought that there is no problem here either, BUT when I got to the installation/update I did not upgrade option, I had a migration of Force instead. He complained of two pilots 'oem-vmware-esx-drivers-net-vxge' and 'oem-vmware-esx-drivers-scsi-3w-9xxx '.

  I thought that the first server was no problem and it works well on 5.0 so I did a force to migrate.

  When the Force 'migrate' was done and I started the server I noticed that a NETWORK card no longer works correctly, Intel 82574 L...

  It says it is disconnected, and there is a red X next to it. I checked the first server again to see if it was really the same exact material and that's the only difference is that the Intel NETWORK card is working on the first but not the second server and they are now both on 5.0...

  How is it, I have had no problem for the rehabilitation of the 4.0, but when I upgraded to 4.1 I had these problems? And how do I fix?

  I need this server running as soon as possible.

  This good news

  Please mark the discussion as correct