Broken BACKSPACE key, replacement? (Satellite L10)

Similar Questions

• Lid switch on Satellite L10 is broken

  Hello
  I broke my lid switch on my satellite L10 (down of all time) now I have no backlight, but it works fine on an external monitor.
  Anyone know how and where to get a replacement switch or the way around?

  Help, please
  See you soon

  gummydave

  You can get it by the partner of service authorized in your country.
  Do you really want to fix one?

• FN keys do not work on Satellite L10 - 103

  Hello

  I have a problem whit my fn keys.
  the problem is.
  My fn keys are not working properly, some work, some don't. and those who are not against hepatitis has the little sign on the screen.
  I have a Toshiba Satellite L10 103

  Sorry for my bad English
  I hope you can help me
  see you david

  Hello

  In my opinion your FN buttons do not work properly because of missing drivers.
  Do you agree with me?

  So the only solution may be to visit European driver of Toshiba and reinstall the software.
  Drivers and tools are in the area of the Archive of the European driver page.

  I recommend to install first the common Modules and then follow the installation instructions in install Instructions txt file.

  By the way; These themes have been discussed here several times. So search first.

  Good bye

• Replacement of battery for Satellite L10-114

  Hello

  I'm looking for a replacement battery for my Satellite L10, bought in September ' 05. Not the battery. is PA3420U-1BRS, 14, 4V Li-ion 4300mAh and I can't find an exact replacement on this site under the Accessories heading.

  This battery has been replaced by another with a similar number of the part?

  Any help/advice would be much appreciated.

  Mike

  Hello!

  Just google for this number of battery, and I am sure you will find some dealers in your area. You can also search PABAS059, PA3420U-1BRS, PA3420U-1BAS, PA3420U-1BAC and PA3450U-1BRS, these are the same types.

• Many combinations of Fn keys do not work on my Satellite L10

  Hi, I had a portable Satellite L10, used with a lot of software. However, many of the key with the Fn key combinations do not work. FN more Esc, F6 F12 and the arrows above, everything works, but others that I can't do. Is it possible that they have somehow been disabled? If so, how can they be enabled again?

  Thanks in advance for your suggestions.

  Hello

  Please see the following [SITE | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp], choose the machine that you have and the operating system that is installed, download all the drivers and tools and install them, no matter if they´re already installed or not.

  Eventually the FN keys should work again. If not, back up all your important data from the HARD disk and perform a reinstallation of your operating system with the embedded restore CD. The installation goes automatically, so Don t be worried.
  After recovering from the machine, the keys MUST work.

  Greetings

• Replacement of transistor on Satellite L10-104

  Hello everyone,

  I have a Satellite L10-104. My problem is that my monitor didn' rooms discovered anything. I turn on my laptop and it works but I don't see anything. I saw that there is a Transistor or something like that on the motherboard, which is destroyed.

  It is in the close not USB-slot on the back of my laptop. It is located next to the resistant R8. I want to change the unit of construction, but I can't read the label. I can just read w... but the rest is destroyed. I know it's a bad description, but I hope someone can help me.

  I need the name of this thing. Maybe someone can give a circuit diagram, or something like that, for me.

  Best regards.
  Carina

  Don t think that someone here will be able to help you because the patterns of the motherboard are not for public use so no one here could post a link or anything that would lead to this teaching

  I think your last option is the maintainer authorized Toshiba in your country

  But I put t think it would be possible to repair the motherboard on the simple fact is that you need to remove this small part, with the help of a soldering station if you need experience in electronics and soldering

• The internal keyboard BACKSPACE key does not work

  I have a laptop Toshiba Satellite and the BACKSPACE key does not work.

  He will start work the rare opportunity, but then it just stops working again.
  This happens on everything, including word and internet ect.

  It has been like that for a few weeks now and I turned the laptop and turn off many times.
  Is there a way to fix it myself or I send for repair?

  Please, * don't * tell me:
  Get an external keyboard
  Try it turn on and off
  Just highlight the words and use the delete key - it's annoying to have to do this all the time
  Type carefully and do not make so many mistakes

  Thank you!

  > Please, don't tell me not to:
  > Get an external keyboard

  And why shouldn't t someone recommends you to check the functionality using the external keyboard?

  It s recommended to connect an external keyboard to verify how the BACKSPACE key would work using 2nd external keyboard. In case the back might work properly using USB keyboard, the question is very clear; in such cases its main shortcomings. The key cannot be replaced or changed or fixed. In this case, need to replace the entire keyboard!

  In case the BACKSPACE key does not even using the external keyboard, then this would mean that the internal keyboard controller is faulty and in this case only the replacement motherboard would be useful.

  But to be honest, I think that its simple keyboard failure and a replacement would solve this.

• Satellite L10 - Hotkey.exe error after booting Windows 2000

  I've installed Windows 2000 on my Satellite L10 rather
  XP. After installing the utility Hotkey-I get an Error Message at every boot:

  Hotkey.exe - Entry Point not found
  The procedure entry point WTSUnRegisterSessionNotification could not be loaded into the WTSAPI32.dll dynamic link library.

  Same error Message When you try to manually start the Hotkey.exe.

  How can I solve this problem? The system works, but the
  Keys not.
  Thank you in advance for help!

  P.S.: As I read on the web, this error has nothing to do with the missing operating system XP - maybe the HotKey software does not work with Windows 2000. Where can I get a Hotkey software work for Windows 2000 for Satellite L10?
  I try to find it on the download from Toshiba site, but there is that some drivers for the L10 on Toshiba.com and the European server are only readers for XP :(

  Hi turmeric

  All the drivers, tools, and utilities are designed separately for each operating system. This means that you can not use tools designed for Windows XP Home edition with other operating system. You don't find utilities and tools because your device is not supported for the Windows 2000 operating system.
  I'm sorry.

• Satellite L10-270 - error Power Saver, utility

  Hello.

  I have a Toshiba Satellite L10-270 and because no standby power utility has been installed on.

  Then I looked for the Toshiba Power Saver, utility and try to install it, but I was unable to make it work. The battery is very low, I really need this software to work.

  Sometimes I get a message:

  "A fatal error has occurred. The program will end.
  "Code: Ox7E.

  And sometimes the message:

  «Cannot be opened because you do not have access rights to use «Toshiba power saver»»

  I hope you can help me, all brands have a power management utility work, I was hoping that it was the same for Toshiba. I hope!

  Any solution, a way to run the Toshiba Power Saver or any other software that could replace it.

  I have another question, where can I find the phone numbers and e-mail technical support or service after sale?

  Thank you.

  Hello

  The energy saving was not preinstalled on this unit because this utility is not supported on this device (Satellite L10-270).
  It would be very interesting to know where you found this tool?
  I put t I think that this energy saving will not work properly because it was designed for another unit. In this case, you must use the Power Options of Microsoft Windows that you can find in the Panel

  In addition if you want to contact technical support please visit this site. You will find detailed information.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/csg_national_entry_page.jsp?service=EU&from=http%3 A / / www.toshiba-europe.com/

  Good bye

• S - Video does not work on Satellite L10

  Why the S-Video port doesn t work on my Satellite L10?
  I have upgraded the video driver and still doesn't work!

  How you try to display the image? You use the function keys Fn + F5 to change output modes?

• Satellite L10-232: black screen after closing the lid.

  Hello

  I moved my laptop (satellite L10-232) in another room, it wasn't stop (just closed it). When I opened it there was nothing on the screen and the battery is not empty (processor still does some things). Anyone know how I can fix this problem?

  Thank you

  Easy...
  PowerManagement is weaker and less stable features on any laptop. (especially with the defective batteries).
  NEVER try to count on the home screen etc. It will work time 999 and 1000 it don't.
  Now, you're done with a laptop computer hanging.
  The ways:
  1. the easy way:
  -push the power button and keep your finger on it for 10 seconds. (5 is enough, 10 to be sure)
  -remove the battery
  -plugin powercable
  -push the powerbutton

  2. the less gentle way:
  -remove the power cable
  -Remove the battery
  -wait 24 hours
  -Insert the power cable
  -push the power button

  3. the hard way: make sure THAT YOUR HARD DISK IS NOT PASSWORD PROTECTED, to OTHER YOU LOOSE YOUR DATA.
  trying to understand hat is the startup key sequence to reset the BIOS at startup. (it should be described in your manual somewhere)

  4. the hardest way:! ONLY BY A PROFESSIONAL!
  IF MAKE SURE THAT YOUR DISK IS NOT PROTECTED BY WORD, OTHERWISE YOU LOSE YOUR DATA.
  The laptop must be open and all batteries must be removed. All the capacitors must be emptied (leaving a laptop without the battery for 72 h). Then turn on
  the laptop.

  Please note that I can't be held responsible for any damage or loss of data under any circumstances.

• Keyboard replacement Satellite P10 804

  HI - so like a fool I spilled water on my keyboard - I immediately switched it off and dry it gently for a few days. All they keys work except for the BACKSPACE key. So I guess I need a replacement keyboard. My laptop is out of its warranty - I'm in the United Kingdom. I think I could replace it myself - is it possible to order as a spare part and install it myself?

  Or would I need to pay Toshiba or one of its service partners to replace the keyboard? I looked at the site of Toshiba Computer Systems, but can

  Hello

  the same thing happened to me a few years ago. I don't know what happens to the United Kingdom, because I am in Germany. But that's what I did: I took the keyboard out of the machine (was easy enough) and I tried to clean it, but without success. So I went to a service partner and the technician replaced it with a used keyboard (which was cheaper) and I only had to pay for the room itself.

  Good bye

• 'Bad Machine' error when I start the recovery on Satellite L10 media

  Hello...

  I have a Toshiba Satellite L10-103 and I want to make the recovery, since I have constant errors and my wireless does not work.

  When I put on CD, everything is ok, I press F12 and get the choice when I want to access computer. I select the CD/DVD drive. That produces the recovery starts and I get this error message:

  "Wrong Machine! This software is designed for personal computers TOSHIBA '

  What's wrong with it?

  Hello

  Are you sure that the recovery CD you are using is designed for Satellite L10 - 103 to 110%?
  Please check this!

  But if you use the same recovery CD that came with the laptop, and you still get the same error message, then the false DMI information that is stored on the motherboard might be responsible for this error message and might prevent to recover.

  This can occur if the motherboard has been replaced and that the technician has not updated the DMI string.

• Satellite L10 DVD Super Multi Drive - E/s of entry Error Message

  Does anyone know why, when I try to play a CD or CD-ROM, I get a box saying i/o error of entry?
  I have a Satellite L10 with a DVD super multi drive. It can read DVDs and DVD ROM

  I thought maybe it was a cable connected the drive itself, but if it's that I need how out of the car and how to support.

  I tried updating the driver and uninstall it then reinstall the drive, but I still have the same problem.
  Cannot use the accompanying software as is all the cd.

  Please can someone help me.
  Thank you

  Hello

  In most cases the entrance of e/s, error message is related to a hardware malfunction (CD/DVD drive).
  The readers of the lens laser can not calibrate properly and therefore it can not read the CD inserted.
  These errors are not uncommon and occur mostly after a long period of use due to a material stressed.

  But let's check the last possibility of solution;
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then, restart the computer and check if it of possible to read CDs.

• Satellite L10-333 PSL10E - USB dongle problem

  HI members, I have a Toshiba satellite L10-333 MODEL No. PSL 10F now I bought a 02 usb wireless dongle.
  now my problem is that whenever I have start my laptop and connect to 02 to get online, the dongle starts to make a loud noise, which is constant and pushes me insane.and it breaks to the top of the internet connection.

  now, I was on the 02 forum, told me it might be the usb port is bad, or maybe I should try re - install the usb drivers, I can not find on the web site of Toshiba, seem to be an error with the results.

  I don't want to spend any more money for this laptop, as it s old for a few years and I have already replaced the screen
  at a cost of £150. can someone help me please.

  I don't have any other Internet, only the dongle... Thank you Paul.

  Jin

  > maybe I should try re - install the usb drivers, I can't find it on the web site of Toshiba, seem to be an error with the results.

  Download chipset utility of [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] and install it