Brooks connection using usb-6229

Similar Questions

• Temperature measurement and the CJC using thermocouples on a USB - 6229 BNC

  Hello

  I'm trying to get the measurements of temperature using type K thermocouples on the box nor usb-6229 BNC. SignalExpress software doesn't let me choose 'Built In' to the Source of the CJC. So, I must select 'Constant', which means that I then have to follow the evolution of the temperature during the day with a separate meter and adjust the value of CJC accordingly to maintain an accurate reading. Is there a way around that to avoid having to monitor the room temperature at the junction?

  Thanks in advance

  Mike

  Hi Mike,.

  It seems that you have managed to find a solution for you have this problem, which is great news.

  However, for future use, if you had bought the 6229 with massive ending (rather than the interface BNC) then you might have interfaced unit with a block of connection SCB-68 (see link)

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/1180

  The SCB-68 has a CYC source built-in, so you might have used in conjunction with 6229 (mass layoffs).

  A bit of in the way, but I thought you may be interested.

  Best wishes to you all

• iPhone 6s use usb connections in my car

  6s IiPhone uses usb connections in my car

  iPhone devices no load carrier via the USB Ports of the music player

• I'm trying to use a printer that connects via USB and he always tells me that it is not a driver?

  Hello

  I'm trying to use a printer that connects via USB and he always tells me that it is not a driver? I don't understand what is happening and I think it's a setting that I have on my computer. Can anyone help? Ive went on the website of the printer to download the driver and the im unable too.

  Hello

  OEM for the printer manufacturer is responsible for the proper functioning of the printer
  and their drivers. Check with the manufacturer of the printer support, their online
  documentation and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  ================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• It is supported to connect multiple monitors using USB as a video source?

  Original title:

  USB touch screens

  It is supported to connect multiple monitors (specifically wireless) using USB as a video source?  If so, a hub would be able to handle this or the USB connection should be made directly to the motherboard or the PCIe interface.  Thank you!!!

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  You can buy a switch HDMI that allows you to connect several devices to sources HD (e.g., monitors, TVs etc.) to your computer, while using only one cable HDMI (VGA or DVI) of your computer to connect to the second monitor. So you can get a HDMI switch on your favorite search engine for compatibility information for the switch with Windows 8.1.

  If you want to project, or sharing of the wireless display, you can use the utility Miracast.

  See also the article below to better understand.

  Plug a second monitor or projector

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• can I connect a usb cable and wireless for the use of 2 separate computers to 1 photosmart 5514e.

  I want to be able to connect the USB to a desktop computer and run a wireless network connection to a top of the laptop. both are windows based PC

  Yes, you can install the printer via a USB port of a PC and the other on the wireless network, network and wireless should not interfere between them.

  Kind regards

  Shlomi

• OR USB-6229 unused outputs floating

  Hello!

  I have a DAQ NI USB-6229 map and I want to generate a current (I use shunt resistors) and inject it into a resistor network. While doing this I also want to measure 6 potential to a few nodes on the network. This procedure is then repeated four times, and for each new set of measures, I want to change the current node injection.

  I managed to make a flat sequence version that works sort of "semi-automatic", that is. I manually move the connector for the injection of current corn,

  now I would like to program to do this for me. The problem I face then is that I have to connect to all channels of analog output to my network and I can't make it floating. So I need to get the voltage on shunt temporarily "unused" zero resistance and make them floating. I was thinking of doing a while loop which regulates the voltage, but then how to leave the loop everything with it regulate the voltage?

  Is there maybe a solution to this problem?

  Thanks in advance!

  /
  Emanuel

  It is much clearer.  Thank you.

  If all of your applied voltages, including tensions applied to generate the currents I1 and I2, are positive, you can then use diodes to rpovide isolation.  You are already set up to measure the tension, it should be possible to offset decreases of voltage diode.

  Another approach would be to exploit the tensions in potentiometric mode to make zero currents. Let me define some terms using your diagram: V1 = voltage applied to create the current I1. V1n = input to the network in the I1 circuit voltage when I1 current circulates. Of the law of Ohm I1 = (V1 - V1n) / Rshunt.  Similarly V2 and V2n refer to tensions related to the current I2.  To define the I2 = 0, V2 = V2n.  Of course the tension to V2n will depend on the voltage and current elsewhere in the network.

  To join the operation points you want will require an iterative process.  Consider the case where I1 = 1 and all other currents are zero.  The procedure might look like this:

  1. apply the V1. Set all tensions to zero.

  2. measure the V1, V2, V1n, V2n...

  3. calculate all currents.

  4 calculate all voltages to change the values you want, using the assumption that tensions n V [i] do not change.

  5 connect the calculated in step 4.

  6 repeat step 2 until the new tensions calculated in step 4 are close enough to the values of the previous iteration.

  If the network is linear, but the values are not too extreme, it will probably work.  If it is not the case, you may need to scan the network to see if its admittance matrix is singular, or the range of values is too broad.

  A state machine would be a good program architecture to implement an algorithm like that.

  Lynn

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• How to install Win XP on Qosmio G20 using USB flash memory key

  Dear Admin,

  This is regarding my laptop Qosmio G20.

  Last month my OS (windows XP media edition) has been corrupted so I attempt to reformat and reinstall the operating system.

  But unfortunately my CD/DVD-Rom does not work/play,.

  Then I try to install it via a PEN drive bootable with integrated... XP but when I go into the BIOS I n I find USB Boot option... :-(

  Then I remove my main hard drive and put it in another laptop and install the XP, its work in this laptop, but unfortunately when I put the new HARD drive the Qosmio his departure gives the XP logo but in 5-10 sec its judgment and give a blue screen message then then restart automatically...

  plezz help me install XP or Vista or 7 those who works there...

  plezzz plezzz sound my laptop preferred

  Thanks in advance

  JAI

  > Then I try to install via a PEN drive bootable with integrated... XP but when I go into the BIOS I n I find USB Boot option... :-(

  Connect the USB flash memory key to the laptop, now switch on and press F12.
  The start menu should appear where you could see all the possible boot devices.

  Do you see the USB boot option in the start menu?
  If this isn't the case, then you will not be able to boot from USB flash memory.

  > Then I remove my main hard drive and put it in another laptop and install the XP, its work in this laptop, but unfortunately when I put the new HARD drive the Qosmio his departure gives the XP logo but in 5-10 sec its judgment and give a blue screen message then then restart automatically...

  I guess that this is because the RAID drivers was not included!
  Qosmio G20 supports the RAID controller and you add the RAID driver (located on the Toshiba UE driver page) in order to recognize the HARD drive.
  But I put t know if you could do so using another computer I guess that's not possible.

  Maybe you can try to disable RAID in BIOS

• Equium A100 stops or crashes when I connect a USB device

  I'm getting desperate now, but whenever I connect a USB device that is powered from my laptop IE sitting navi or mobile phone or ipod the thing just lock up or stops.
  All ideas will be very welcome; I checked issues of battery and made sure that my diet is in order but am at a loss!

  The same thing happens with all the USB ports? I also use several external devices using the USB ports, but everything works OK. Have you tested with USB?

  Your preinstalled laptop comes with a recovery image?

• Satellite Pro L300: Could not establish connection using WPA / WPA2-PSK

  Hello

  I have a Netgear FVG318 router with the new firmware and problems to connect using WPA-/ WPA2-PSK with Realtek RTL8187B integrated.

  With the help of WEP that works. I did a complete restore of Vista and installed SP1 + all Windows updates. No change...

  Then I tried using a Netgear USB WLAN Stick WPN111--> the same result, works only WEP.
  I rechecked the shared key before!
  After that I tried with a HP laptop, wonder... everything works! WEP, WPA / WPA2-PSK works! What do you mean?
  I think that there is a software problem in Toshiba-Vista version.

  Do you have any idea? The support has not helped me.

  Hello

  What you need to do is first of all update the WLan driver and if possible, you should check if the latest BIOS is installed too.
  I had similar problem on my A210 and all first I've updated the BIOS, then driver WLan.

  This helped to establish the WiFi connection.

  Check it out!

• When I connect the USB and LAN cable does not my trackpad

  Hey guys how are you.

  When I connect the USB and LAN cable does not my trackpad

  How can I fix this error. Please teach me.

  Which macbook model do you have?

  a USB mouse still works?

  your keyboard still works?

  No matter which USB port you use?

  No matter what USB device allows you to create this error?

• After the BIOS update can not startup Satellite C640 using USB key

  After upgrading my bios Toshiba Satellite C640-10F (PSC02E) to WIN 2.00, I can't boot the laptop using USB key, when I checked the BIOS with F2, I was stunned because the USB port connected to the laptop has been labeled as FLOPPY drive. Y at - there no possibility to downgrade the BIOS?

  Thank you

  Stand by.
  Set the BIOS to default and after restarting, use F12 to get into the boot menu.
  USB option is available there?
  What is saved on your USB device? I mean why do you want to use device USB to boot from it?