Brother mfc printer drops first line of web text, printing from web reloaded pilot now completely stopped. Printer works fine with files open source. Thank you

Similar Questions

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• Brother laser printer worked fine, now does not print. ????

  The strange thing is that it printed fine a few days ago.  I don't think that I've changed something such as the registry or Services.msc and the print spooler has started in the Services.  I try to print a test page and it comes is in the queue and said "error - printing".  Its connected by USB and the port's LPT-1.  When I use the convenience store brother tells me "a print job in the print queue prevents other printing of print."  It says it has fixed the problem (a green check mark is there).  When I cancel this job (only here - the test page) the same thing happens again.  I don't find in Device Manager.  It is not a section for printers.  Would be - as Ports or USB controllers?  If this is the case, it does not say "printer."  Perhaps, it refers only to the port used?
  The strange thing is that it printed fine a few days ago.  I don't think that I've changed something such as the registry or Services.msc and the print spooler has started in the Services.  I try to print a test page and it comes is in the queue and said "error - printing".  Its connected by USB and the port's LPT-1.  When I use the convenience store brother tells me "a print job in the print queue prevents other printing of print."  It says it has fixed the problem (a green check mark is there).  When I cancel this job (only here - the test page) the same thing happens again.  I don't find in Device Manager.  It is not a section for printers.  Would be - as Ports or USB controllers?  If this is the case, it does not say "printer."  Perhaps, it refers only to the port used?
  The strange thing is that it printed fine a few days ago.  I don't think that I've changed something such as the registry or Services.msc and the print spooler has started in the Services.  I try to print a test page and it comes is in the queue and said "error - printing".  Its connected by USB and the port's LPT-1.  When I use the convenience store brother tells me "a print job in the print queue prevents other printing of print."  It says it has fixed the problem (a green check mark is there).  When I cancel this job (only here - the test page) the same thing happens again.  I don't find in Device Manager.  It is not a section for printers.  Would be - as Ports or USB controllers?  If this is the case, it does not say "printer."  Perhaps, it refers only to the port used?

  The strange thing is that it printed fine a few days ago. I don't think that I've changed something such as the registry or Services.msc and the print spooler has started in the Services. I try to print a test page and it comes is in the queue and said "error - printing". Its connected by USB and the port's LPT-1. When I use the convenience store brother tells me "a print job in the print queue prevents other printing of print." It says it has fixed the problem (a green check mark is there). When I cancel this job (only here - the test page) the same thing happens again. I don't find in Device Manager. It is not a section for printers. Would be - as Ports or USB controllers? If this is the case, it does not say "printer." Perhaps, it refers only to the port used?

  I didn't think that it would make a difference because she seems to be a problem of connection/port.  Turns out it was a hardware problem... a cable failed.  It was a removable end.  Never seen that before.  Probably not a good feature!  In any case, it was a good lesson.  I should have replaced the first thing cable rather than a lot later.  Its fast and results are instantaneous.  Everyone seems to have extra cables lying around!

• I can't print from firefox. The paper feeds through the printer but does not print. The same web pages appear when I use internet explore. And the printer works fine with word, Excel etc, but not with firefox.

  Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• I can't print from the Internet, but my printer works fine with Internet Explorer

  When I try to print I am asked to save the file and get "unknown error." I can print with that printer from Internet Explorer. I uninstalled and reinstalled Firefox.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• 1022n printer works fine with XP, not with Windows 7

  Network printer and is "seen" by XP machines.  I have a laptop running Windows 7 and it can't see the camera... so I can't install it.  (Of course, I can install it as a USB device... but this isn't what I want).  I downloaded and installed the new Windows 7 installation software.

  Any suggestions?

  Disabled earlier, I had my firewall (or at least I thought so) does not.

  However, I tried something someone else has suggested:

  I assigned a static IP address to my printer... an address outside of my my dynamic range.  Then I was able to select the option to add a printer using a TCP/IP address.  It worked... so I stopped any investigation further.

  It was quite a scavenger hunt determine how to configure IP address static... but someone in another thread set me off: I started typing addresses in my dynamic range until I found one that matched my printer (the goodness it's only 5 numbers since the beginning of the dynamic range) and he had the option... my ability to change an automatic IP address a manual IP address.

  Thanks for your help though.

• OKI Microline 184 Turbo printer works only with Windows 2008R2

  For Windows 2008R2, the test page is printed with the missing lines and introduces some corrupt characters.  Only 75% of content printed ok.  The printer works fine with other pilots and BONES.

  Hi mikechange,
  The question you posted corresponds to the Windows Server forums and would be better suited in the Technet forums. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads 
  Hope this information helps.

• OfficeJet 8500 more scanner not found, the printer works fine. Windows 7 Ultimate 64 bit

  I had to remove the drivers and the software once.  I have re-installed, but now the printer works fine and when I try to run a scan of the computer or the printer they don't know each other and I can't scan.

  It fixed...  I had asked a computer specialist to look at and he cheated by creating IP port and tell the PC to print via the port.  Although the sweep of the network was suspended on that port.  Installed the printer via a USB cable and then removed from the printer and reomved first which stood on the IP port.  Once it is I installed the printer again and scan network found the printer immediately and went big.

• Canon pixma ip4000 printer works only with Windows 8.1

  Separated from this thread.

  Hai, I have a Canon pixma ip4000 printer, it works fine with my desktop running windows 7, but it didn't with my laptop running windows 8.1

  I can't find any driver support to the Canon Web site.

  Is there any solution for this?

  Looking forward to hearing from you soon.

  Thank you

  Hello Chit,

  Thanks for posting your query on the Microsoft Community.

  I suggest trying to download the latest Windows 7 drivers from Canon Web site and then try to install in compatibility mode.

  Step 1: Download the drivers from the Canon Web site.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4000#DriversAndSoftware

  Step 2: Installing the driver in compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  You can also provide the following link to check the compatibility of the printer.

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  Follow the Microsoft articles as reference and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  h ttp://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.

  It will be useful.

• OfficeJet pro 8600: printer works fine, but the software is not

  Printer works fine.

  However, the HP support the program "HP OfficeJet Pro 8600" will not start. I can see it in the HP folder under all programs, but clicking on the program name has no effect. The program name poins to "C:\Program HP HP Officejet Pro 8600\Bin\HP Officejet Pro 8600.exe" - UDCDevicePage Start

  In addition, in devices and printers in Control Panel, the printer connected displays. By double clicking on the icon takes me to...

  

  Opening HP All - in - One Printer Remote takes me to the window right... but the printer shows offline, and the various functions (scan, fax, etc.) are not available. (As noted, the printer is currently online, and I can print correctly.

  Connection to the wireless printer.

  All these functions work fine if I call them from the physical control on the front of the printer Panel.

  I don't know if these are two separate issues, or the two aspects of the same problem.

  Any thoughts?

  Thank you.

  Hello

  Try to install the following hotfix, then try to open the HP Officejet Pro 8600 software:

  http://support.HP.com/us-en/document/c03640384

  You can see any difference?

• My queue is empty and shows no documents that are printing. Printing works fine and I can cancel all documents, but I don't see the list to cancel individual documents.

  My queue is empty and shows no documents that are printing.  Printing works fine and I can cancel all documents, but I don't see the list to cancel individual documents.

  Hi sunshineabove,

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          Do you remember all the recent changes on the computer before the show?

  In the meantime, you can check the link below: http://support.microsoft.com/gp/pc_print_introductiontocanc

• I have a Dell V305 printer scanner. The printer works fine. When I try to scan it says list of applications to download and then he said: it couldn't download the list. I don't know what to do.

  I tried everything to make it work. Reference Dell wanted to charge me 234.00 for them correct errors on my computer where the printer does not respond to my computer. I don't have a disk for the printer when you purchase my system. I restored to factory default and now the printer works fine. All windows updates are made. But somethis does not go with the scanner. Please someone help me!

  Update to the latest version of the driver: http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?DriverId=R264821&FileId=2731112408

  and the latest firmware: http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?DriverId=R205586&FileId=2731123538

  can help.

• Epson XP200 not to connect to the laptop. Printer works fine by itself.

  A new Epson XP200 connects to the laptop. Printer works fine by itself.

  From Internet Explorer

  Original title: connection

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Canon S820Printer my printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full.

  My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print.  Ink tanks are full.  What bad past and how to fix it?

  If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783

  - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8844
  If all goes well.

• my printer worked fine in the past, but now when I try to print, it says document is in Quebec, but it is offline. What's wrong?

  my printer worked fine in the past, but now when I try to print, it says document is in Quebec, but it is offline. What's wrong?

  dougnatz,

  Try to run delete print jobs to remove all blocked the queue print jobs.

  Rick