Brush the predefined tools does not properly

Similar Questions

• The cutting tool does not work after windows updates.

  I read answers to similar questions about the failure of the cutting tool.  I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware.  It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work.  I don't have to go through hoops of restorations etc to get something it seems work was broken by updates.  I'm about to go to a Mac.

  It worked for me! Thank you!

• "The cutting tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.

  The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.  However if I select snipping tool in the menu start nothing happens at all.

  Original legislative:

  M.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  A simple reset will often be the case if a tool becomes awkward. Go to this link, then select the lasso tool:

  Difficulty of tool

• TEXT tool does not properly

  Hi I use Ps CC in a Mac Pro. The TEXT tool in not working not properly. After I do any changes in the text (size, color, font... edit) just disappears! The cursor goes back and removes all the text has been select or rigged.

  I re-install the software. I have "reset tool" in addition, the text in a layer separated on high background & color. help your pls.

  Thanks Chuck, but nothing works, until I am in contact with an expert and this was the solution:

  Click on Apple icon go to system preferences-dictation and speech and turn off dictation.

• The text tool does not work in Photoshop CC

  When I try to use the text tool, that it does nothing when I type even if the font size is 12, and the color is black on a white background, and then when I try to get out of the text tool a progress bar will appear that says "Record type" and the progress bar does not until 15 minutes later. After that, no text shows. I tried to move the text tool above where I have used it previously, and the cursor doesn't detect any text in the box.

  This is a brand new installation of photoshop, I did not any customizations to it.

  My operating system is a Mac with OS X 10.7.5.

  I already tried things:

  …………………………………………….

  -J' tried to uninstall and reinstall Photoshop CC and creative cloud.

  -J' tried to change the font size, color. Each took 15 minutes due to the type of rendering progress bar.

  -J' tried to change major fonts such as Verdana, Arial, etc..

  -J' did the steps on this page to troubleshoot fonts:

  http://helpx.Adobe.com/Photoshop/KB/troubleshoot-fonts-Photoshop-CS5.html

  It was the procedure on this page:

  S ' ensure that Photoshop is the most recent version.

  -Clear overview of the policies.

  -Delete the specified fonts known to cause trouble.

  -Clear cache fonts photoshop

  -Clear cache OS police

  -Try to remove everything except a font on the Mac and keep the rest in another folder.

  -Use their fonts test script.

  Now the police only that I have in my folder of Mac fonts is Arial.ttf

  I did all these things, and the problem still occurs. All other tools works fine for me! I need to use photoshop for graphics work, I need to do. Any help would be greatly appreciated!

  I found the problem! When I pressed 'File' > 'New' to make a new document, I typed in the 1000, but I'm used to the measures in pixels, not inches. The new facility was in inches lol. The Web was gigantic! Once I put it to a smaller size that the text tool worked great! I feel stupid, I over looked that.

• The selection tool does not

  The selection in Illustrator tool does not work normally. It allows me to automatically, click a trace or a group of objects and show the rectangle that automatically gives me a corner to enter and fit selected items. How can I get this feature working again?

  Looks like you're out of the bounding box. Got to View > see the bounding box.

• "pointing to the file" tool does not work

  I use Dreamweaver CS4 on a Mac under OS X 10.5.6. The tool 'to the file' (the icon that looks like a target in the properties panel) does not work. When I click on & made slide on it nothing happens. Any ideas on how I can get it to work?

  dmmontana wrote:

  I use Dreamweaver CS4 on a Mac under OS X 10.5.6. The tool 'to the file' (the icon that looks like a target in the properties panel) does not work.

  There is a known issue point to the file on Mac if you use a big screen (I think only 20 ' or more) or on a Setup dual monitor. It works very well on smaller screens.

• Refine the matte Soft tool does not properly.

  Every tutorial I see online (like this: Adobe after effects CC: how to use the tool edge refine - YouTube ) on the use of the Matte Soft refine tool is striking just on a cut piece of film and it automatically gives a key more sweet that still leaves the small details like strands of hair in your shooting. However, whenever I apply it to my cut images, it gives me a strange halo around my person. Here's a screenshot to show you what I mean:

  http://i.imgur.com/5E7vV9J.PNG

  and

  http://i.imgur.com/k38Qvxl.PNG

  Any help on what I should do differently would be much appreciated!

  PS I know that title that youtube tutorial say "refine Edge Tool" and not "refine Soft Matte", but he talks about it in the second half of the video.

  OK, so I just tried to apply preset animations > Image utility > key key light + cleaner + spill suppressor and everything seems to work fine. I really believe that something is not communicate properly on my system, but this workaround works fine, so all I guess.

• The 2015 CC/brush flash pencil tool does not work with Cintiq

  I recently bought a Wacom Cintiq 22HD and all new Adobe software.  I mainly use Photoshop and Flash to the drawing and animation. (Before I was running cs6 products on windows 7 on a Tablet and everything worked fine).

  My configuration: Lenovo IdeaPad Y 50-70.  Windows 8.1.  Wacom Cintiq 22HD with latest driver. Adobe Flash CC 2015.

  The main problem I have is in Flash.  Everything works fine in Photoshop, I can draw on the screen without problem.  But I can't use the brush or pencil in Flash tool. When I draw the mouse, all right. When I use the pen, he made this super long line on the side of the document.  If I try to draw something, he's going to draw, but super far from where it is supposed to. The strange thing is that when I use the brush with a normal mouse tool, it works fine. When I use the online tool, pen tool or other tools, my cintiq pen works very well. It is ONLY the brush and pencil tools when using my Cintiq. I have to be able to draw with my Cintiq in Flash.

  
  

  Are there any solutions for this problem? Help, please!
  

  

  Hi all

  The problem associated with the brush and the pencil drawing in Flash Professional CC 2015 configuration dual monitor with Wacom devices has been fixed in the latest update. Please update Flash Professional CC 2015 v15.0.1.179.

  Rgds,

  Mukesh

• The camera tool does not work properly

  Hello, I have a question about the camera tool. I just started working with Ae and I'm confused.

  I want to Textanimation. The first scene works well, I facilitated the movement of the camera and set all keyframes.

  But now I can't move the camera. Any tool of camera I use, the image remains the same?

  I guess it's just a small mistake, a checkbox may be, but I can not understand how to fix it!

  So, can you help me please?

  You have no 3D under the CCI layer. The end of 2 seconds 3D layers... None of the 3D, camera layers have no effect.

• Tools does not properly

  Since I updated to 2015,5 most of my tools are not working properly.
  For example I can not move the layer with the tool move or use the free transform tool to resize them.
  My brush, Eraser, spot concealer and tool Quick Selection will draw only in strait lines.

  Agricultural tool, hand tools and tool rotation is make my document and I can not change the order of my layers.

  I tried to reset my preferences and reinstall Photoshop and adobe creative cloud, but this did not affect the issue somehow.

  Help with this will be greatly appreciated.

  I had to completely reinstall windows to solve this problem

• The eraser, the slider tool does not show?

  When you use the Eraser tool, that the cursor does not show the type or size of the used brush when it is on the image, how do I change this?

  I try to go into your preferences and under the screen and the cursor, change it to brush size under painting cursors. Also, make sure that your "Caps Lock" is off.

• Clone Stamp tool does not properly (OSX)

  I have an iMac 27 inches and I have 32 Gb installed.

  I was previously using CS5 and had no problems whatsoever using my Wacom Intuos Pro tablet.

  I recently bought CC and right from the beginning I had these problems. Thinking it was me and/or software needing to be updated I rebooted and check for updates and then restarted once more. No change.

  I've heard questions like that and have experimented with not having all the music in the background and also tried the Clone Source method that some have found useful. I have found that nothing done.

  The problem is that when I click Alt/Option and click on the place where what I want to clone, the ScreenTip remains on the source image select and only after pressing the Alt/Option key does not change. It is so hit and Miss if the place you have chosen is the place you want to clone from. What you imagine is not an ideal way to try to work.

  For me personally, the clone tool is an important tool and use it to each project.

  I am weather wondering a connected usb keyboard would work better? Its strange as so far it so the only tool I have a problem with.

  Thanks in advance!

  Your system spec looks like more than enough, but I am a user of Windows, and not flash with the Mac.  There have been problems with OS x using Wacom Tablets systems, so try disconnecting the Tablet and see if it still happens with the mouse.

  Note: I edited your subject line to indicate that you are a Mac user, which hopefully will attract more relevant answers on this topic.

  Good luck

• PP 2015.3 edit video keyframe in order with the pen tool does not

  After update, cannot modify keyframes of video tracks in sequence with the tool pen.

  Yes, I chose the key and assured edit keyframes has been selected.

  When clicking on the video it becomes white and does not change all (trying opacity), yet it's audio track is very good and allows the same type of mounting of volume.

  This is the second issue since update. Any help would be appreciated... maybe it's something I'm not getting or just missing?

  Thank you

  Shaggy

  Click on the FX box on the element in the timeline, and then select opacity.

  

  For some reason any on 2015.3, it has been set by default to the Motion.

  MtD