BSOD after installing new 1 GB RAM on Satellite Pro M40

Similar Questions

• BSOD after installing Toshiba VAP for Win 7 - Satellite A200 - 1 m 8

  Hello. I have Toshiba Satellite A200 - 1 m 8
  OS: Win 7 ultimate 32 bit

  After that just install toshiba value added package to get my work function keys, eveytime I hit the FN key alone or with its related key
  I get a BSOD screen message where it says: IRQL_Less-or-not_equal. and I can see at the bottom of the memory physical dump of the bsod screen page and a counter or timer.

  any help is appreciated.

  Kind regards.

  And you have installed THIS version?

• DeskJet f4180: always E error message and empty cartridge light flashing after installing new cartridge

  I always get the error message E and empty flashing cartridge light after installing new black cartridge.

  Welcome to the @vinylzappaforum!

  I read on the 'E' and the empty cartridge light blinks after I installed a new black ink cartridge. If you have tried the guides that I suggested in our other thread here, so the next step would be to call phone support at HP to discuss your printer options coming with them. I let the info below.

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• After installing new ink cartridge cannot print from ipad hp 5510 series

  Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

  I can print from the laptop based on windows.

  the two settled on a wireless router.

  Help!

  (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

  Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

  I've corrected the printer IP addy... and viola.

  IPad and laptop computer are once more compatible with the printer.

  Appreciate your message...

  Louise

• After installing new cartridges, printer icon says printer is off line. Tried to go in the passage of the off-line online, without any change.

  The printer itself doesn't seem to be the problem. Have disconnected the cables, and the message is offline, offline. Reconnect and he said just in offline mode. This makes me think that it is a software that I'm not waking up switching.

  I did the online diagnostics and he thinks that the printer is turned off. But it's not. Were do form here?

  "After installing new ink jet cartridges.

  The problem began after you opened the printer.

  I suggest you contact the manufacturer of the printer.

  See you soon.

  Mick Murphy - Microsoft partner

• Printer does not print after installing new ink cartridges

  I have a Lexmark X 2500 printer. After installing new print cartridges, the printer gives me the error message to order more ink. The printer does not recognize the new ink cartridges that have been installed.  There is a warning on the ink cartridges to do not touch the contacts on the bottom of the cartridges. If this happens, how can I make them work?

  Richard

  You should contact Lexmark as they know their best products and we can onlu support of Microsoft products on this site.

• Satellite Pro A120 - Jerky empty reading after installing new HARD drive

  Just installed a new hard drive in my Satellite Pro A120. Made a full new install Vista, installed all the drivers but video playback is choppy/jerky. Even google earth is juddery. It didn't use to be like this with the original hard drive.

  A I had a problem of driver somewhere? I think it's the 945 chipset.

  Hey Buddy,

  To be honest, it's really hard for us, users, to say what causes this problem and I think you should test more yourself

  Anyway, you have reinstalled Windows using the Toshiba Recovery disk?
  You should also check if all Windows updates are installed and if you have yellow exclamation points in Device Manager.
  For any use of video and multimedia substance High Performance plan wrote BobRock_1.

  Sorry, but I think that it s all we can say :(

• Should I still had windows updates after installing Service Pack 3 on Wndows XP Pro

  I need my latest updates I installed after installing Service Pack 3 on windows xp pro? Because I'm trying to use less memory as possible, and I like 2 gigs of updates before I installed service pack 3. So I can go and remove the latest updates, or should I be?

  See this discussion, Thomas: http://aumha.net/viewtopic.php?f=62&t=33827 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite Pro M40 RAM fit laptop model L650?

  Hello

  I recently upgraded from my Satellite Pro M40 to a L650 because the M40 is dead.
  I was wondering if I could use the ram that I put in, in the L650?

  I'm guessing it will not, but thought I'd ask just in case.

  Thank you

  Sorry, but I don t know why this combination. Max RAM on M40 is 2x1GB and I think you're in L650 2x2gb. Right?

  It makes no sense to me.
  I put t know what L650 you have exactly, but some models can be upgraded up to 8 GB, so it will be better for you to upgrade with a 4 GB of RAM L650. Part number is PA3677U-1M4G.

  By the way: there are different bus clock etc new notebook you should only use modules compatible and faster.

• Satellite Pro M40, failure of the hard drive - the new disk restore disk?

  Hello

  My Satellite Pro M40 hard drive died and I want to install a new drive. Unfortunately, my old drive is 60Gig and the Web of Toshiba parts site has only 40 GB or 80 gig drives.

  I have problems with the recovery disk if the hard drive is not exactly the same thing?

  Your advice would be appreciated.

  C

  No, he should t be any problem with the Toshiba Recovery CD.

  On the recovery CD, you'll find a Windows OS, Toshiba drivers and utilities and software further.
  These entire applications are packed into image files.

  You should only be sure that the HARD drive is compatible with your laptop and it will be recognized in the BIOS.
  Then simply to boot from the recovery and installation CD must start.

• Satellite Pro M40 recovery disk install XP on satellite or L300?

  I had a Satellite Pro M40 with XP Pro who died completely (hard drive). I have the recovery disk.

  I now have two laptops more - a satellite and a L300, both with Vista. I want to install XP on one of them (preferably the L300). Is it possible to do using my M40 recovery disk?
  A bit of googling suggests that the differences in the size of the hard disk - may be an obstacle. My M40 40 GB drive, these new drives are much larger.

  Anyone tried this or have any advice?

  It will not work. Before the start of the recovery procedure the laptop will be identified. If the recovery media doesn t code is code on the laptop, the installation will be interrupted.

  M40 MS on L300 recovery no way.

• BSOD after installing HD Graphics 3000 (Yes, goes again...)

  Hey Hey community,.

  I have a problem (bug gold!) old or when I try to install the intel HD Graphics 3000 on Windows 7 64 bit, the laptop restarts only a BSOD at logon message 'welcome. '

  I tried several combinations, many drivers, I don't know what to try now.

  I'm sure it's a driver related problem, as if I boot without Intel driver (or in safe mode), it starts perfectly.

  There is no conflics with other software / drivers installed: after the new installation of W7, I (try to) install first Intel.

  The laptop is an Aspire V3 - 571G with an Intel Core i3 processor - 2348M (and I guess that the BIOS is v2.13). It has been sold with Windows 8, then improved to 8.1, then 10. Now, its owner wants to return to W7.

  I tried the driver on the site Web of Acer Disconnections with all versions 64 bits (7, 8, 8.1) and the pilot last and last-1 of the Intel download area, new BSOD. Also tried (with all versions) to install with/without AERO support, even here.

  So I ask here if someone has a similar laptop with a working driver that I can use to complete my installation.

  Thank you!

  Thank you for your time.

  It turns out that I understood little where the problem came

  The laptop was sold with a single 4 GB of RAM, and the owner it upgrade 2x4GB

  Before my first post, I memtest'ed the 8 GB, no problems appeared.

  Yestarday, I tried to boot W7 + Intel driver with the original 4 GB, it worked.

  Then switched with only the other 4 GB, crash/BSOD

  The second added 4 GB is exactly the same brand/model/specs as originally installed

  To be sure, I started in yesterday a memtest with Aries crashy. This morning, after 4 pm and 18 assists, no problems appear. (memtest + 4.20)

  So good... I guess that...

  In any case, thank you for taking the time to answer me.

• 10 the desire: desire 10 cannot adjust the print size after installing new cartridge

  After installing the new print cartridge (60XL) print size is very large: so far, I have unplugged the usb connection and power, reinstalled the cartridge a few times and run tests... I also went to control panel and looked at all the parameters, but find no way to adjust the size of printing... can anyone offer a solution... Thank you

  the solution: problem was with Firefox, when I switched to Chrome it prints perfectly!

• No Signal after installing new graphics card

  Hello and thank you in advance for your help!

  We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

  (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

  (2) checked monitor and DVI & VGA cables with another computer: they all work.

  (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

  (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

  (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

  (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

  (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

  (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

  (9) we restarted again to get once more no signal message.

  So... what should we do?

  Thank you very much!

  Triusa, welcome to the forum.

  I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

  http://support.HP.com/us-en/document/bph06788

  Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

  If your problem is solved, please click "accept as a Solution.

• Does not start after installing new video card

  Hello, I have a desktop H8-1284, and the video card went a few days ago. So I bought a video card Geforce GTX 650, and after installing the card and the computer starts, it hangs just at the start of the HP logo screen. So I put an old geforce 8800, and she starts without a problem. When I try the new card Geforce GTX 650, the same thing, just hangs at the splash screen.  I checked the bios and it doent seem to be something there that can help wouild. My diet is 460 w, and the new map needs of 400 w, any help will be greatly appreciated

  Hello

  Most of the cards PCI-E 3.0 are retro-compatible with the PCI-E 2.0 slots.  However, in order to get the PCI-E version 3, you must use a processor Ivy Bridge.  Look at these specificationsfor a typical NVIDIA GTX 650.