BSOD every 2 hours on Satellite L300D-19F

Similar Questions

• Satellite Pro L300-156 - WLAN connection drops every 12 hours

  Hello!

  I have a short model "Toshiba Satellite Pro L300-156" (PSLB1E).

  The system state is:

  I used the recovery CD (to install Windows XP and other software on this CD).
  I've upgraded to the latest version of the BIOS (1.50, 10/07/2008) for my laptop and I downloaded all updates for Windows XP.
  I installed the latest WLAN driver for my WIFI (Realtek RTL8187B) card.

  The problem is still there:
  Every 12 hours (exactly on the minute!) drops connections.
  Not only the Internet, but the local connection.
  It is even a kind of matrices.

  Both a connection to a local computer and "mIRC" (ssh/telnet-program) to "PuTTY" (program-chat-IRC) says "network error caused abortion of software".

  These ping connections not, they die instantly in a tenth of a second.

  Hello

  I guess it can be caused by a 3rd third party tool that was installed on your laptop.

  I mean it of really strange that disconnected EXCATLY after 12 hours of use.

  "I have goggled a bit for the message: network error: Software caused connection abort."
  And found that this error is displayed if the Windows network code decides that your network connection is dead. This will happen when you remove the cable network Ethernet-connected computer, or if Windows has any other reason to believe the entire network has become unreachable.

  I think you should check the settings of your WLan router. My router refresh / disconnects after 23,59 hours to ensure that the IP address has changed.

• Satellite L300D BSOD on reboot after updates to Win7 64 bit

  Satellite L300D BSOD on reboot after updates to Windows on Win7 64-bit (toshiba version). Restoration of the system, safe mode, nothing helps.

  I am now installing the 32-bit version, but hey, 64-bit must be possible, does it not?
  I'm open to good ideas.

  Thanks much for this information.
  Seems the BIOS update would solve the BSOD with Win 7 64 bit OS problems

  Welcome.

• Satellite L300D BSOD after upgrade to Windows 7

  I got this laptop (Satellite L300D) for a little more than a year with windows vista (32-bit) running and there were no problems. However, I've recently upgraded to Windows 7 (x 64) and became the problems since the first reboot.

  On the first reboot after installing windows 7, the computer off just after the "Starting Windows" screen Turn on again took me to the repair of the system where he performed a system restore and I was able to start successfully even once. I thought that the problem had something to do with the automatic updates, so I disabled the and tried to restart to see if the problem has been corrected. This time, after the "Starting Windows" screen I got a BSOD of unrecoverable system error. After several attempts to reboot and multiple attempts to repair system (which usually says she didn't) it started correctly again.

  This problem has been going for about 3 weeks now and it is quite irritating. The results of the system of compensation for claims that a "Boot critical file is corrupt", but it starts eventually after several attempts to start. He also has a habit of turning at random during the race (it happens about once or twice a day). So from now on, whenever I chaque fois que je tente tries to start my computer it shuts down after the start screen or give the BSOD and restarts and the only way to make it work seems to be to keep trying to start and hope for a successful boot of the system upward (this happens finally after a few failed attempts).

  I did some research on this and came to [this | 1251 http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L300D-ST3501&rpn=PSLC8U&category=&selCategory=3&moid=222 & os = & ct = DL & selFamily = 1073768663] page. I think that's exactly what my problem is (need to update the BIOS), but if I understand correctly installing windows to do this only for 2000/xp/vista and I am unable to use the second option to boot from the disc as I get the BSOD before he gets to that point. I should try the windows install option although I am running windows 7 or is there another way to update the BIOS? Or I'm off completely and the problem is with something else?

  I wasn't sure what information I would like to add to this post so if need more information please let me know.

  Thanks in advance

  Edit: Oops, just realized the page I linked is not link to exactly what I had opened. I do not speak of 'critical BIOS updates for Windows 7 64-bit' under 'support form '.

  Post edited by: Jacob27

  Hello

  First of all, it would be interesting to know what code BSOD, you get exactly. Can you post this information useful? Normally, on the Microsoft Knowledge Base, you can find additional information about most of the BSOD codes and so you can start to solve this problem.

  BSODS are often associated with drivers or RAM/HDD. The latter, you can check with special diagnostic tools, Memtest86 for RAM and Drive Fitness Test for the HARD drive. These two tools are free and you can find it using Google. You can download an iso image of them to create a bootable media where you can start the test.

  Regarding your update to the BIOS: I put t know what L300D you have exactly, but according to the Toshiba site it shows an update of the BIOS also for Windows 7 64-bit. You can try to install it.

• BSOD when put on Satellite L300D

  Can someone help me or tell me the best thing to do?

  I bought my Toshiba Satellite L300D two years ago and it broke last year because I hit it a little because of the internet.
  So I sent offshore to a friend of my uncle, who has replaced the drive with a 35 GB hard inside you.

  But now, whenever I turn on my laptop I get the blue screen and it cannot cross, he says that windows can be corrupted and is not loading and it says to use the original installation CD, but I don't have one, but I have a Windows XP one and I would make Windows XP instead of Vista.

  Is there anything I can do to get it working again? Please help me quickly

  I have the disc I put it in and run off it goes to a white screen and then it comes up with language, so I take enlgish, so he says are you blah blaahdy sure that if I click Yes. Then he goes on something of command and made all this in writing, saying like unpacking OS and WinRE, then it no longer write. and said things his copies. so he says I/O boot has failed and says press any key to continue, what should I do?

  HELP ME PLEASE!

  > but I don't have one, but I have a Windows XP one and I would like to make Windows XP instead of Vista.

  > Is there something I can do to get it working again?

  Yes, you can try to install Win XP on this laptop.
  But first, I would check the HARD drive.
  Download the tool called Drive Fitness Test and test the HARD drive.
  If the HARD drive would be ok, then it must be another reason why the IO error appears.

  Go to BIOS and set the BIOS to the default settings, save the changes and then try to install Win XP.

  I also recommend boot from other CDs (perhaps you could copy the Win XP disk to another disk and could use the other drive to start). It is possible that something is wrong with the CD of Win XP

• Satellite L300D - cannot downgrade from Vista to XP

  Yes, I realize that Vista to XP is technically a downgrade but in my current situation, its nothing but an upgrade.

  Right, I have a laptop Toshiba Satellite L300D-PSLC8A.

  I ve only had it for 3 months now and I've experienced various problems with it, the DEP, on the one hand, is a real problem.

  I ve had problems with my hard drive, began to really hurt at some point to the point she would have a continuous loop of repair and just wouldn t start correctly.
  I had it sent back under warranty, thinking it was a hardware failure, but apparently not, blah blah, whatever.

  My main problem right now is that I don't like Vista on this machine and have tried to format / install XP on it, several times, without success, using XP service pack 2, then one, then none

  Each time I boot from the CD, it will start the initialization components needed to launch the formatting and installing XP, gets to the point where it says "starting windows" downstairs, and it blue screens on me, every time.

  Now, I ve tried check disk, virus scans, I even got paranoid after this happening the first time and I have 3 firewall on this machine, but it's just will not work.

  Any suggestions or anything like that would be very useful

  Hello!

  BSOD code means you are using a wrong driver AHCI.

  You integrate the AHCI driver? To the Satellite L300D, you must download the display driver package because there you can find the AHCI driver. Then, copy the drivers on an external floppy drive and load after you have started from the CD by pressing F6. Or allows you to create your own nLite installation disc and then you don't need the external floppy drive. Here you can download: [www.nliteos.com].
  In addition you will find hundreds of discussions here in the forum about this audit as this!

  Alternatively, you can install XP without AHCI drivers if you change the mode in the compatible BIOS. But some users here reported that the AHCI mode is faster

  Good bye

• Satellite L300D-12U - two problems after installing Ubuntu Linux

  Hello

  I installed Ubuntu 8.10 on my brand-new u. Satellite L300D-12
  So far, everything works fine, but there are two things bother me.

  1. I have problem with suspends to RAM. It does not work. If I use the option to boot, the screen goes black but the laptop is still running (you can hear it).
  In addition, nothing happens when I press the power button to exit the sleep option.
  I completely close the laptop and restart to be back in Ubuntu.
  Maybe someone has some ideas how I can fix the problem?

  My/etc/default/acpi-support have these entries:

  # Comment the following line to disable the ACPI suspend to RAM
  ACPI_SLEEP = true

  # Comment the following line to disable the suspension on disc
  ACPI_HIBERNATE = true

  # Change the following of 'sleep' to use ACPI S1 sleep, rather than S3.
  # This will save less energy, but can run on machines more
  # ACPI_SLEEP_MODE = mem
  ACPI_SLEEP_MODE = standby

  2 battery life
  My current maximum battery life is 01:10 hours. On windows, it's 2 hours >. Maybe someone has some ideas of configuration to increase the time of battery under Ubuntu?

  Any help is appreciated.

  Thanks in advance.

  Kind regards
  Manual

  Hello manual

  I'm really skeptical about Linux here support. I heard that Toshiba will start with Linux support, but of course, it is not started yet.

  If nobody here can offer help I recommend you discuss this on some Linux forum. You have more chance of getting help here.

• LAN extinguish after a few time so that the Satellite L300D-10B is working

  The main problem is that when I try to download something long, after some time (30 min to 1 hour or something close to) the network card is turn off and does not work once again, when I disable/enable it. He started only work when I have my laptop reestart.

  + Computer laptop buyed in January of this year. +
  Model is: * Satellite L300D-10B *.

  I am trying to reinstall the network driver & etc. But it is not useful.
  I think that if immediately on or sleep card network settings, but I turned sleep and @auto disable @ OFF.

  Help to fix this problem.
  Best regards!

  You should try to update the BIOS to check for an update from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com

  Also, make sure that you have all updates and Service Packs for Windows installed.
  Visit the Windows Update Web site.

  Maybe the problem is also with the firewall or security suite. To update or modify the software.

• Satellite L300D - TEMPRO alert reader D capacity WARNING

  I have a Satellite L300D. It has been little used, but I get TEMPRO alert that says that "data stored on drive D has reached 75 percent or more capacity: space 149,01 GB total disk and disk space GB 37.73.»

  Can anyone tell what it is and I can do something to free disk space.
  I tried to find "Disk D" on the laptop without success-it is not mentioned in the backup/restore windows.
  Thank you very much

  In my opinion there is no reason to panic. This is just information and you must not take it so seriously. Continue to use the free space on the D partition. When the disk is full, you must find new option for backing up the data.
  For this application, you can buy external HARD drive and move all your important data to make the free space on the HARD drive for the use of every day.
  That's all!

  TEMPRO is application that runs in the background and informs the user about available updates or situation on your laptop. To be honest I don't use it at all because I know when the HARD drive is filled or not. I have Tempro removed from the system.

  My laptop works well and stable. So it works well I have need of updates.

  This drive letter and other parameters can just confuse you.
  Simply continue to use your laptop and be happy with it.

• Satellite L300D-200 - I can do a system dual boot?

  Hello

  My toshiba satellite OS is Windows Vista Home premium.
  Does anyone know if the satellite L300D can have a dual boot of Windows Vista home premium and the Linux operating system?

  Hello

  Why it shouldn't be possible to make a system dual boot?

  You can install a Linux distro without problem. What distribution do you want to install? If you want Ubuntu I can recommend the Wubi Installer. This tool is very easy to use because it installs Ubuntu as a Windows application.
  But of course you can also use another Linux distribution ;)

  Last but not least, let me give you a tip: before installing something, make sure you already burned the Toshiba recovery disc. If a problem occurs, you can restore the factory settings every time.

  Good bye

• Satellite L300D-10 q - how much does a repair?

  Can anyone who has had a similar problem please let me know about how much a repair would cost for the following laptop.
  Toshiba Satellite L300D-10 q

  He started to extinguish itself, then new, then we noticed that the fan is not working could be overheating and plugging himself out of serious damage. Now, it will not be achieved even the post.

  Thanks for your help.

  Hey Ferret76,

  I think that no one can tell how much a repair for this laptop costs. It is based on spare parts and the working time of the technician. There are a few spare parts of many different available for every laptop and so no one can answer this question at the moment. You should speak with a technician. They can check the laptop and give you an estimate for repair.

  But before going to an ASP you need to clean the laptop. Maybe dust blocking the fan and so it s overheated and shut down. I also clean my laptop. I do it every 4 months and follow these instructions: http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm

  Good luck! :)

• Re: Why is it so hard to find drivers for a Satellite L300D-11V

  I recently acquired a laptop Toshiba Satellite L300D-11V to my daughter when she was upgraded to a netbook. It had Vista on it and I tried to installed Windows 7. I've never owned a notebook pc before, only a desktop pc; and they have never been through an OEM like Toshiba, but is built for me or by me. I bought Windows 7 and here, asked if he had any tips to install the drivers on my laptop Toshiba.

  Windows installs all drivers actually when it installs. Not the best that you not understand, or later, but enough so that everything works.

  I had problems but try to update of maps, graphics and imaging (webcam) devices. Windows gave a dated 2008 latest ATI driver accredited a pilot signed for the ATI Radeon X 1250. After a few searches through Toshiba, I managed to update this for 2009. But it took 2 days to research before finding what I think is the last Catalyst (and last?) ATI Radeon X 1200 series v.8.593.100.0 dated the 10.02.2010. Unless of course you know better... ??
  The webcam Chicony USB 2.0 CNF7051 is something else.

  The drivers for this camera software might work when installed by Toshiba with all the other stuff of Toshiba, and they resolutely refuse to work if you remove the software of all Toshiba with a clean install of Windows 7. The camera works you understand with other software; Messenger or Skype; but on its own... no! I managed to remove the message "the pilot was able to start" and thought that I had a crush, but I now have a message "webcam disabled or has failed.

  At least he does when you try to start the software, not on every start at the beginning. So I'll stick to this... unless of course... ??
  At times like this I realize why I buy a machine no OEM and install my own operating system and the latest drivers, not the old ones that are provided and not updated by OEM.

  In my opinion, it is not difficult to find drivers for Toshiba laptops. You just look for the right place.

  Many people with European models of research pilot on the US page and I was wondering why they can't get good portable.

  I assume you have the European model so you'll find drivers on Toshiba are supported on the page under http://eu.computers.toshiba-europe.com > support & downloads.

• Satellite L300D-13s will slow down the boot process

  Whenever I start the Satellite L300D-13 s computer laptop (using Vista Home Premium with factory settings) I am presented with a Please wait"" message. The startup process can take up to a minute! Is it because of McAfee installing and executing a Bios check, because this does not happen on my desktop PC (Vista Home Premium) except if an update has been installed?

  Apologies for the fundamental question, but this is getting frustrating that this happens every time you start and I don't know why. Please help if you can?

  Thanks in advance...

  Hello

  There are different reasons why your Vista runs slowly.
  The main reason is the enormous amount of processes that are ruining to the background of the OS.

  You should know that the laptop uses different features that are controlled by drivers and tools.

  If you want you could disable some processes using the MSCONFIG. Check the Startup tab.

  Verify that the processes are not really important to you and turn it off.

  Welcome them

• Satellite L300D PSLC8C does not start

  I'm in a lot of trouble here with my laptop.
  I have a satellite L300D MODEL NO = PSLC8C 04401R series and this is what is wrong.

  It does not start. I have the power of Yes, and it dosent seem to work at all.
  I used to run vista Home premium on it but she kept crashing on me, so I tried to make recovery disks and that has not worked, kept computer sends me wouldent and mistakes write cd

  It has gotten to the point where my laptop wouldent work so I erased the memory and yes I tried the thing to push "0" and nothing was.
  When I had cleared I tried to install windows home edition, Ive had a satellite before this problem and that fixed it, but a blue screen keeps popping up saying that the computer stopped inorder to damage it.

  I tried at home, Proffessional and even a vista upgrade disc and nothing works.

  So I really need to know what went wrong and how to fix it.

  Hello

  To me, this looks like a serious hardware problem.
  If you are not able to reinstall the operating system on the HARD drive then some of the equipment should work.
  It of difficult to say what role could be faulty we can assume only what could be wrong

  If the BSOD appears the first part that should be checked is RAM module.
  The faulty RAM memory may be the reason for BSOD and therefore, it would be interesting to know if the new RAM would solve this problem
  You can delete only one module of RAM and could try to start the laptop comes with an installed module.

  If it doesn't, then you need a help of a technician for laptop
  Guys could check essential components such as the CPU or the motherboard

• Satellite L300D continues to go off without warning

  I've had my Toshiba Satellite L300D for a month, and recently he continues to go off without warning.
  I don't know what to do as this continues to be between 3 seconds to turn on the laptop and 5 hours to turn on the laptop.

  What should I do?

  The laptop gets hot? Did you check that?

  Maybe the laptop gets hot because dust blocks the air flow in cooling assembly. You can clean it with a jet of compressed air, that you can buy at a computer retailer. This could blow the dust from the ventilation of cooling.

  Also, make sure that it is enough free space around the laptop.