BSOD on NB200-10Z Installing Win XP

Similar Questions

• How can I install new windows on NB200-10z without a CD player?

  Hello

  I have a mini computer "Toshiba nb200-10z" and is no more startup.
  I would like to make a recovery, but it does not work.

  I know there's a shortcut like press 0 when the laptop starts.
  With this shortcut, you can start the recovery in order to reset the software.
  But when I press the 0 button it gives me an error.

  So I think that the recovery disk/partition is lost.
  How can I install new windows on this minilaptopUri without a CD player?

  Hello

  Try this procedure:

  How to recover a Toshiba notebook with the HDD recovery procedure
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If this does not work, you can try to install Windows 7 with USB flash memory key.
  There is a nice tool from Microsoft called Windows 7 USB/DVD Download Tool
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  You will be able to download (you will pay for the iso file) an iso file and would be able to create a bootable USB key.

  Here's a nice instruction how to install Windows 7 on USB
  http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/
  but in this case you need a new installation of Windows 7 DVD
  ?

• BSOD after fresh installation of Win 7, failure of page in the nonpaged area. Win 7 will not install

  A day at the start of a program on my computer that I used for years without incident, the computer suddenly fell down, restarted, and I got the infinite loop of system repair. No change in hardware/software, don't know if a recent Windows Update has been installed. Once again, CPU, mobo, Vid, RAM are the same for the past 4 years.

  After much frustration, I decided to just reinstall Win 7. So I deleted my partition, re-created a new partition and installed Win 7

  In the last step of the process of installing Win 7, it says Setup cannot complete. It is then stuck in a loop of reboot with a BSOD page fault in non paged area.

  I tried F8 on startup and choose Safe mode, but then he says that the installer cannot boot mode safe because the installation of Win 7 did not finish.

  I tried to reinstall Win7 by removing the disc again, but I get the same results.

  What can I do?

  HI - finally got the job. I had the computer to use only the GPU on board BIOS and was able to install. Somehow the graphics driver conflict when Windows is first installed and it kept crashing.

  Thanks for your help.

• NB200-10Z - what touchpad driver should I install?

  I have a nb200-10z... and both pilots theres on the download... semantic page touch pad or Alps touch pad? what one do need me?

  Ive had a problem when using the touchpad, it stutters and crashes sometimes for a few seconds during its use... really annoying especially when playing games. He also did something weird when typing... sometimes it will just move the cursor above so I'll carry on typing in the middle of stuff ive already typed! seems to do it on the internet and not on word. How can I fix? I will call toshiba on this subject, if you guys don't know.

  also, he started only to hang on shutdown... every time... He did this whenever my external dvd player usb or any what device as the mp3 is NOT connected... even if I "remove" it and disconnect and then stop it crashes. so, I must leave the usb cable connected to stop correctly. any suggestions on that?

  any ideas on either? It certainly will not be closed properly if a usb device (all) is connected to the USB sleep n load...

• NB200-10z Wi - Fi can not be turned on.

  Hi I have a Toshiba NB200-10z. I am not able to turn on the wireless feature. See this screen capture:
  http://i.tinyuploads.com/NVT1Jc.PNG

  I have windows 7 ultimate 32-bit OS. Please tell me the solution to fix it on.

  Hello

  It seems that you have installed a new Win 7 on this laptop.
  The fact is that WLan can be activated using the FN + F8 key combination

  In order to use the functionality of the fn, the VAP (value added package) for Win 7 32 bits must be installed.
  Did you install this in the past?

• Tecra S11 BSOD after trying to install BIOS v3.1

  Tecra S11 BSOD after trying to install BIOS v3.1

  I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
  Win 7 pro
  Where can I find the minidump to see what file that are the problem?

  C/windows/minidump folder is empty.

  Hello

  Do you get the BSOD during the BIOS update procedure?
  Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

  If you have installed your system, then you should check that the VAP is installed as well.

  Also, I found this info about the update to the BIOS:

  + Attention! +

  + Please close all applications before running the update. +

  + At the end of this process, the computer will be restarted in order to update the EC. +
  + While updating the CE, the screen will not appear and the power LED etc can blink. +
  + The computer may restart several times. There is no abnormal behavior. +
  + Please wait until the computer is restarted fully. +

• PROTECTED M800-10v: how to install Win XP Pro

  Hello. I'm french, sorry for my bad English

  I protected M800 with vista installed pro.
  I can't install win xp because I have the blue screen.

  Can I install XP?

  Thank you

  Jean-Marc

  Is the BSOD 0x0000007B code?

  You must go into the BIOS and change SATA "Compatibility" or "IDE" mode

  Or, if this option is not available, you should use the F6flpy driver is in the Intel Matrix Storage driver package.

• Cannot boot Linux from the CD/DVD USB drive - NB200-10z

  Hi all

  I try to install linux on my nb200-10z fedora11, but a strange thing happens: when I choose to boot from the cd/dvd and I insert my DVD my laptop boot linux normally HD; If for example, I insert the recovery dvd created with the toshiba utility, it starts on the dvd rom usb...

  A that someone has experienced the same problem? y at - it the possibility to solve this problem?

  I also noticed that if any usb cd/dvd-rom is present, the bios boot options show all cdrom option in the start menu

  Thank you

  Hello!

  Well, to me it sounds like it's the Linux boot disk isn't working properly if you can start the Toshiba Recovery disk successfully.
  Have you tested the same disk of Linux to another computer or laptop?

  In your case, I would try to burn the Linux disk again and use high quality as Verbatim DVD - R or TDK media.
  Never had any problems with the two manufacturers.

  Good luck!

• NB200-10Z - Webcam graphic render fail

  I searched on google, there are huge articles on this camera problem: graphic Reder fail, happened when using SOFTWEAR ASSISTANT CAMERA, which means the build in camera is not working!

  My model is Toshiba Netbook NB200-10Z. I tried the solution that advised on the internet websites, which is reinstalled the driver for the camera then updated. He however still cannot do the camera work.

  Please provide a solution for this problem.

  Thank you very much!

  Hello

  Have you noticed this problem on the first day? With the factory settings, I mean that everything should work OK.
  You have installed THIS version?

• G62 225 NR. I need remove Win7 and install Win XP. How?

  My daughter has worked in America and he bought a laptop HP G62 225 NR. Then she returned to Russia and he brought with him. Now, I need to change the OS with Win 7 on Win XP because my program does not run in Windows 7. I can't install Win XP even if I install a new HARD drive. How to remove information from BIOS on previously installed Win 7? Unfortunately this model HP in Russia is not supported.

  Hello:

  You will need to integrate the ahci sata drivers to install Windows XP on your model.

  Please read the guide below, section of Intel and then read the downloadable PDF to find out how to integrate all the sata drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120/highlight/true#M17758

• Boot camp install Win 7 on iMac 27 "(ultimo 2009)"

  Hello

  I am experiencing a problem installing Win 7 on my iMac 27 "(ultimo 2009)." I got this version installed two years without a problem, but now it concerns me.

  When you create the partition, bootcamp and starting from the Win 7 DVD I am able to install it without problem. When the PC reboots after you download windows support on my USB, install windows and is about to start Windows for the first time, it freezes and the screen is all black.

  I read on the support site you need to create and image of the Win 7 dvd which should be used in conjunction with boot camp, but I can't choose this option (it simply is not here) "disk image", when using boot camp.

  So what to do?

  /

  lanieldk

  Please see Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple support .

• Since I installed Win 8 How can I get the + for new tab show?

  Since I installed Win 8, + new tab is more to the right of the line of the tab. How can I get that back? Any help would be appreciated.

  Right-click on the taskbar and press 'Customize' or reset the toolbars by removing a file localstore.rdf.

  See:

  • The back, home, bookmarks navigation buttons and recharge are missing
  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• How to install Win 7 on Satellite P300?

  I have a laptop Toshiba Satellite P300. When I bought it, I had to this topic Vista Edition home premium. Now, I tried to install Win 7.
  I have the DVD of Win 7 Professional but when I want to boot from the DVD win 7 it wouldn t accept and the boot PC always from the hard drive even when I changed it on the BIOS as it doesn t recognize. I tried with another Win 7 DVD to format the hard drive and install Windows 7 as the normal procedure, but Toshiba doesn't recognize any DVD Win 7, it acknowledges that its original DVD system (hddrecovery files that combines the win vista and all the drivers of Toshiba for laptop, as you know).

  So, how to format the pc and install Win 7 (if you run the installer of win 7 on the computer I install Win 7 but I can t pc format and I still keep old files and I put t like) so please help me if you have a solution for that I thank you!

  I installed Win7 on P300 s brother without any problem. I don't understand what the problem with your drive in Win7.
  Are you using the original installation disc for Microsoft?

• NB200-10Z does not start - slect boot device message

  Hello, sorry for my English, I'm Italian and I have him translated by the translator.
  I am writing because I have a big problem.

  My toshiba NB200-10Z has this break: I turn it on and I get the "Toshiba innovation leader" screen and bottom left shows «crazy (F2) Setup, press (F12) to the boot device selection menu...»

  No matter what button I press him, and still nothing happens. I tried to replace diskbench hard ram, but nothing does not change.
  I don't know what to do.

  I am very worried. Can you help me?

  Thank you to tell me everything

  Dino, Rimini Italy

  Usually, the message appears because the laptop could not boot boot device...
  In most cases the disk HARD is not found in BIOS due to the fault and therefore the laptop not found system.

  Question: are you able to access the BIOS F2 key?
  If so, the HARD drive is listed in the BIOS?

  You can boot from another bootable media such as disk or a USB key?