BSOD w / Satellite 1110 due to problem of DirectX graphics

Similar Questions

• Satellite 1110-Z15 starting problems...

  I have a Satellite 1110-Z15. Got some problems that occur when starting up. What happens is - go on, seems to work very well, the XP loading screen comes up, but just before it gets to the part where it asks you to log in it restarts and the whole process begins again and again and again...

  Any ideas? Not really want to lose all my data :(

  Kris

  Hello

  have you checked the Mode function without failure of Windows XP Home edition?

  During booting press the F8 key (between the Toshiba Logo and the WinXP splash screen) then you can choose Safe Mode.

  Starts with the parameters of Safe Mode WinXp default driver you could to see if a pilot or a registry is damaged.

  Hans Bye

• Satellite A200 and Win7 - problem loading the graphics driver

  Hi guys I have a problem with my Satellite A200 (PSAF6A).
  I installed windows 7 just now, now half the time when I start the computer it displays a message on windows encounters a problem loading the graphics drivers and the resolution is terrible. When I restart immediately, most of the time, it loads fine - no message and a good resolution. I tried many driver reinstall but it is always the case.
  Someone knows what's the problem? Is this with windows 7, or do you think the graphics card can be on the road to extinction?

  Thanks for your help, a lot.
  -Chris

  Hello

  It was ok before installing windows 7? I don't think it's a hardware problem. Have you installed the driver for the Toshiba driver page?

• Satellite A660 - 1 HL-problems with the graphics card

  Hello!

  This is my first thread so I apologize if I am doing something wrong and for my bad English. :)

  Just bought a Toshiba Satellite A660 - 1 hl with two adapters, integrated and a GeForce GT 330 M. The integrated works well, but when I go to the dedicated I encounter problems. The non-adjustable resolution in optimal mode and windows in the operating system (windows 7) delays when moving. I can't get info on the map in all kinds of temperature programs or dxdiag and such others.

  I tried to install the drivers from nvidia, Toshiba and windows update with no improvement. I can't run Windows expreince index because I get an error message or of any average games do I encounter error messages there as well. I begin to doubt that the drivers installed even.

  I hope you guys can help out me :)

  It comes to getting the error messages:

  http://ImageShack.us/photo/my-images...krmklippe.jpg/

  http://ImageShack.us/photo/my-images...krmklipp2.jpg/

  http://ImageShack.us/photo/my-images...krmklipp3.jpg/

  http://ImageShack.us/photo/my-images/9/skrmklipp4.jpg/

  You should test the RAM (memory) for problems using the Test of memory of Microsoft or the www.memtest.org (bootable CD).

  To confirm that this is a hardware problem, you must save your documents and run recovery.

  If the problem still occur on a new image, then the laptop should go to an ASP (Toshiba Service Center) for repairs (possibly a motherboard replacement).

• Satellite 1110 backlight problem?

  Hello
  I had a Toshiba Satellite 1110 for about 1 1/2 years and recently the screen went dark, it seems that the backlight has broken or come off. It sounds like it could be a problem with the LCD inverter (as a google search shows) and I was curious to know if my model would be accepted although it is not on it: http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=UK&ID=FL_INVERTER_UK list?

  If this is not the case, this problem would be the title of the component Exchange program? The model is listed, but the symptoms are not the same as the link of mine: http://www.toshibadirect.com/content/pc/b2c/CEP.html

  Edit: I live in the United Kingdom if that makes a difference

  Any help would be great, thanks
  Claire Harris

  Dear Claire,

  The best way to solve your problem is to contact the after-sales Service of Toshiba partner. AFAIK all Toshiba laptops are covered by a two year European warranty. They can check your hardware of machine parts and exchange of defect.

  Here you have the link to the database of the Toshiba Service partner
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck!

• Satellite 1110 - Z15, CD - RW, DVD problem

  Hello
  I have laptop Satellite 1110 EN - Z15 and problem with
  Carpet * a DVD/CDRW Ujda 730. It does not read the DVD rom that is saved, he reads only original DVD.
  I can't update driver and do not know what to do.
  Thank you in advance.
  Natasa

  [Edited by: admin on 7 January 05 20:01]

  Hi Natasha,.

  The same thing happened to me, but it was my fault. My DVD-ROM can read just DVD-R. It is not possible to watch movies recorded on DVD + R. Please check if your DVD-ROM can read all formats.

  Good bye

• Satellite 1110-Z15: problem with Recovery CD and DVD player

  I currently have a Satellite 1110 model number PS111E-006R8-EN/S1110-Z15.
  But a few weeks ago, my DVD Rom drive no longer works, it would not run properly when a cd is inserted it kind of Jolt and then arrested and continues to do the same. Anyway to cut a long story short, I tried to rebuild the system by using a version of windows xp that has been successful, it is now, I found the original recovery disks, but without using the cd drive inward, I had recourse to an external cd drive freecom, I hold the c key at startup , but nothing happens, can anyone help emergency
  PS: I made the changes in the Bios to boot from the cd drive

  Hi nichollsr,

  in our society, we have 2 Satellite 1110-Z15, and there is a delicate hint for recovery.

  Toshiba has made a small mistake and printed the wrong order on the CD. You only need to change the order of the Recovery CD. No.. 1 is no. 2 and vice versa.

  Insert the diskette n ° 2, hold down the 'C' key and the recovery is expected to begin. If your laptop does not identify external drive-Freecom CD try to hold the 'U' key to boot from USB.

  I found a FAQ on the site of Toshiba UK

  http://UK.computers.Toshiba-Europe.com

  You must click on Support / download, then to the knowledge base and search for a called FAQ

  'TIU0000002559 '.

  There is a detailed explanation of this issue.

  Goodbye, TOK

  PS: Do not forget to reward points, I'm a Pointcatcher!

• Keyboard/mousepad does not on Satellite 1110

  I have an old satellite 1110. It is a dual boot with linux and windows XP machine. The Boot Manager is grub.
  When I let the machine start the OS default without touching the keyboard at the stage of grub, about 70% of the time when the finishing of the machine to start the keyboard and mouse will be non-functional. However if I use the upper and down arrows to grub stage, 100% of the time to keyboard and mouse mat work correctly when the machine finishes booting.

  I'm trying to understand why this would be so. It does not seem to relate to the involved BONE, just the physical manipulation of the keyboard. Is it a bad connection due to lack of chip, bios or other software problem?

  Hello
  Are you sure that the touchpad is enabled?
  Check it by using the Fn + F9 key combination. If this combination does not work, try to find the power button function in Control Panel-> mouse control
  By the way; have you tested If reinstalling the touchpad driver could help solve this problem?

• Recovery disk will not start on Satellite 1110

  I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

  So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

  I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

  Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

  Anyone here knows a remedy to this problem?

  (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

  I am in the United Kingdom, and is a UK machine if that makes a difference.

  Hello Micha

  Is this your ODD works properly with the operating system?

  I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.

• Satellite 1110-Z14: ATI-Graphic cause error when using LAN, DSL

  English version below!

  UPS... German version not accepted... angry!

  [English]
  Computer laptop Satellite 1110-Z14 crashes when you use LAN (network connection).
  Error message: too high voltage or a current USB device, there is no USB device not connected!
  (ATI) graphics card doesn't work properly (low resolution) - reboot, the system crashes to the top
  Note: The laptop work stable during the use not LAN!
  The system is clean! Please don't tell me that I need to reinstall my software.

  Does anyone know about this error? Thanks in advance.

  Hello

  It is the first time I heard of this problem.
  For me it looks like a hardware malfunction and I don t think you will solve it by yourself. In my opinion you need an expert and the only way is to contact the Toshiba service partner in your country. He can start the diagnostic test and it can give you an appropriate response.

• Engraving on Satellite 1110

  Hello!

  I have a toshiba satellite 1110, the laptop pretended to be writing the CD but does not work. I can play cds and dvds without any problems however.

  Anyone know what could be the problem?

  Hello

  What CD did you burn?
  As far as I know, this player supports only CD - R or CD - RW.
  In this case if you want to burn files on other CD media so it should not possible.
  Please check. In addition, try to use Nero software of engraving. I use this tool engraving and I m very happy.

  Good bye

• Satellite 1110-Z15: this DVD-/ + RW discs are compatible

  I had problems with the CD/DVD combo drive in my 3 yr old Satellite 1110-Z15 laptop and I'm looking to upgrade to a DVD burner instead of simply replacing it as for.

  Can someone tell me what DVD-/ + RW discs are compatible with this model?

  Thank you.

  Hello

  You will be very happy if someone can give you that info. In any case, for the hardware update is responsible for service Toshiba partners. If anyone knows what compatible player is, as service partners.

  Another solution is to use the external drive. It allows you to use the most recent one that burns all formats available on the market. The problem is that your camera has USB 1.0 only and no firewire port.

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Satellite 1110: USB2.0 PCMCIA install freeze

  Hello

  I have a Satellite 1110 (at the level of the Bios 1.2) and wanted to install a Trust 3 Port USB 2.0 Cardbus adapter http://www.trust.com/products/product.aspx?artnr=12918.

  The problem is that the system completely freezes and nothing happens when the card is inserted.

  I'm always looking for how to change the IRQ setting, but impossible to find a solution.

  A problem is that I can't pass the Bios to 1.5 because my floppy drive is broken does not work. -> Y at - it a possiblity to bring in the Bios 1.5 without floppy?

  Thanks in advance.

  Hello

  Gibson is absolutely right. Sometimes it's dangerous update BIOS and you can ruin the entire system. To use this device exists in the traditional version just and do it with a floppy disk.

  I hope that the installation is done as described in the manuals of the card.

• Host controller high-speed USB 2 for Satellite 1110

  I have improved my Z15 Satellite 1110 XP home to XP Pro. I feel that I have 2 USB ports on my laptop. Problem that I face is that when I connect a USB 2 device, it can not find host controllers and operate at 1.1 speed.

  I read maybe it's a problem with the motherboard drivers, is there anything I can download to fix this problem?

  Hello

  If I remember your unit has three USB ports and they are definitely 1.1. There is no way to make them faster. One solution is to use the USB 2.0 PCMCIA card.

  It is not some kind of anomaly or problem and there is no way to fix it.