Card memory locked, cannot take pictures... help!

Similar Questions

• Cannot take pictures iPhone 5s and hidden folders

  Husband has iPhone 5s, and it cannot take any more pictures with a storage in full.  Sometimes he wanted to completely import/erase photos off phone, sometimes import but not erase.  Apparently (according to iTunes when connected), it has an insane amount of photos stored on the phone SOMEWHERE, but his camera is COMPLETELY EMPTY! When you connect to the computer again, and she asks if we want to import photos, we say Yes (just for fun now), and he says there is still no new pictures to import. (for a good reason because he can't take pictures and the film file is empty).

  How to access or import these photos hidden this iTunes dashboard says that he has, then he can use his camera again? They must be stored somewhere on the motherboard right?  BTW his iPhone isn't a year old, but either.  Never had this problem before with sound or all other iPhones, so we are baffled.  It won't restore to factory settings due to other information that he does not want to lose in the process, even if we backed the phone up to iCloud and computer via iTunes.  ANY SUGGESTIONS PLEASE? DOES ANYONE ELSE HAVE THIS PROBLEM?

  Thank you!

  iPhone 5 s

  The images are probably corrupt and occupation of space while not clearly rendered like pictures and available in the Photos app

  This article can help

  1. What is others and what I can do about it - CSA

• I cannot take pictures with 5 concerts available through iPhone 5s.

  I'm trying to troubleshoot iPhone 5 s mother.  She directs questions where it does not allow to take photos more because it says it's full.  When go us to settings and look at the use, we have 5 gigs available and used 5 concerts.  She has deleted everything it can turned off his phone and it still not allow it to take pictures with the photo app.  When using facebook, it can.

  We tried a reset and restoration, and he always acts as if his phone is full.

  If you have not already done this, open the Photos app.  Select Albums on the bottom, then "recently deleted".  Choose 'Select' top right, then 'Delete All' at the bottom left.

• day 2 old Canon Rebel T5 90% of the time its stuck in mode development in AI .wont take picture

  even when I push down once pushing halfway it just don't stop development and take the picture.especially inside I found this frustrating.it very said as BUSY all the time.
  I tried the other setting, but it does the same thing,

  is this new camera broken? expected

  should I go back to Costco and get another. cannot take pictures at least externally

  Help my first DSLR and so far, I'm very discouraged

  prior was Panasonic LUMIX FZ70 no problem with it

  awilmot2003 wrote:

  even when I push down once pushing halfway it just don't stop development and take the picture.especially inside I found this frustrating.it very said as BUSY all the time.
  I tried the other setting, but it does the same thing,

  is this new camera broken? expected

  should I go back to Costco and get another. cannot take pictures at least externally

  Help my first DSLR and so far, I'm very discouraged

  prior was Panasonic LUMIX FZ70 no problem with it

  Busy is most often caused by a problem of SD card.

  AIservo is supposed to concentrate all the time.

  The mode that you use on the camera?

  What happens in green square mode?

• Short of space to take pictures on the iPhone 6 s

  I want to avoid the space "cannot take picture (or video)" because no dreaded message storage.  I activated the iCloud and photo industry and upgraded to 200G.  How can I make sure that there is always space on my 6 s iPhone to my photo/video when the time comes?

  kristymctee wrote:

  How can I make sure that there is always space on my 6 s iPhone to my photo/video when the time comes?

  Regularly, transfer photos to your computer.

• WX350 - why camera appear no warning when you take pictures without a memory card?

  I have a digital camera Sony WX350 that allows me to take pictures even if I forgot to put the memory card in the camera? I realize account then I lost photos as none of them have been saved on the memory card.

  Why don't the camera WX350 indicates a warning, or prevents me from using the camera, if it detects it is no inserted memory card?

  In my view, that he should warn you when you turn on the camera.

  Also, I believe that there should be an icon indicating that there are no inserted memory card when it normally will show how many photos you can take.

• My eos 500 d take pictures to less than the value of the manual and HAVE the value servo... Help!

  Hi all. my camera will not take photos more in automatic mode or manual mode unless I have it HAVE servo value. It will be always filming and take pictures of in this mode. the problem is the same with all lenses. Anyone have any ideas?

  Assuming that you test in Nice bright lighting, it is probably a failure of the lens, but there's a little more tests needed to be sure.  When the appliance is in mode "One Shot" (not in "AI Servo" mode) the camera also uses what is called the "Update priority".  This means that when you press the shutter button to take the picture, the 'priority' is on the guarantee that the camera was focused BEFORE it will allow the camera taking the picture.  If you pass in "AI Servo" mode, the camera switches to what is called the "release priority" (most popular with sports and action).  Priority of release explains that when you press the shutter button... the most important thing is that the camera taking the picture "right now" (if the camera had time to focus or not).

  Once again, you must have enough light to test (outside on a day... that's fine).  Don't test it in dark situations - especially on the subjects of low contrast.

  Please turn on the camcorder in "live view" mode, with the target set to autofocus (AF/MF switch on the position of the AF).

  It to focus and take a picture?

  The reason I ask is because your camera has in fact two independent autofocus systems.  He uses a normal mode (looking in the viewfinder to frame the shot) and the other in "liveview" mode (when using the LCD screen on the back to the chassis so.).

  It is extremely unlikely that two development systems can fail (because they are independent of each other.  The camera uses one or the other, never both at the same time.)  If the camera cannot focus with ONE of these two methods point, then the problem is more likely to be objective.

  The camera sends signals to the intermediate target electronic contacts that you see at the back of the lens.  But the engines are actually inside the lens itself.  If the lens electronics or engine does not then the lens will not focus, and since you are in 'One Shot' with "Priority Focus" mode, the camera will refuse to take the picture because it cannot lock the focus.  BTW... If you pass the lens to position "MF", the camera will still be the shot because the camera is no longer trying to focus.

  If you have more than one objective... try using a different lens.

• cannot download pictures from a Master Pro card.

  I am in a panic. Back to take pictures and now that they do not completely download. It says preview not available for this file. I've tried everything. Some pictures were developed, but when you click on them they say - could not read an excerpt. Help!  This is a new card and have never used a Master Pro before.

  There is a good chance that it is a hardware problem, that your card is not correctly recognized, if you have an old card reader he may not be able to manage new types of cards.

  Excatly what card was it? Is what card reader exactly?

• video downloaded to my lap top from an SD card, cannot get picture only sound

  video downloaded to my lap top from an SD card, cannot get picture only sound

  Hi Pauline,

  as volunteer asked J format that the videos were saved is the most logical question here.

  All films registered as media of Windows, or MPEG, avi files, should be good.

  B Eddie

• Canon G12_I cannot take a picture. Purple lines fade in and out, then black screen.

  Uploaded a few photos off the G12 and then charged the battery and when I reinstalled the battery I could see pictures, but when I switch them to camera mode I have brief purple lines then black. And I'm not able to take pictures. Help!

  Uh oh, sounds like the processor or sensor could have retired. I have to assume that you can not access the menu to do a complete reset of the system, so I remove the battery and try to keep about an hour. With the battery, press the power button and hold for about 10 seconds. Then, reinstall the battery and see if it does the same thing. If so, you may need to contact Canon on a repair, but that could be very expensive. It could have been a static load that occurred when you changed the battery, otherwise the processor or the sensor has reached the end of the line.

  I feel your anxiety that I have a PowerShot G12 and this is my favorite camera. It is used there, and some refurbished, to replace it. I hope you can get it running again.

  Steve M.

• Z10 Z10 Blackberry BlackBerry takes a long time to start when the parameters "SIM card PIN lock" is activated

  Device: BlackBerry Z10
  Model: STL100-1
  Software version: 10.2.1.537
  OS version: 10.2.1.1925
  Carrier: Beeline (KZ)

  Z10 takes a long time to start when the parameters 'SIM card PIN lock' is running

  Tried to activate or disable this setting, the result:

  On - 5 min 13 sec (on-screen progress bar has reached 100% for ~ 1 minute, then waited for another 4 minutes in this State)

  Off - 1 min 17 sec

  What is the problem of the time difference?

  Good, thanks

• BlackBerry Smartphones unable to take picture Bold 9780... kindly help!

  Impossible to take the picture. Through the BlackBerry. Expert s/w came to know that a file is missing, named "javax.microedition.media" and show msg "javax.microedition.media.MediaException: Unable to take picture.
  Kindly help!

  Hello and welcome to the community!

  A missing file is difficult to come back in and of itself. On the contrary, a clean reload of the OS is a much better method to retrieve it. The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• cannot use the Lifecam VX-700 to just take pictures

  I got the Lifecam VX-700 for Christmas and it works when I use it on myspace, and tumblr, but I can't use it to just take pictures unless I'm on a Messenger or a social network.

  Can anyone help?

  I have Windows 7 32-bit, but it was the same thing when I have Windows Vista 32-bit, and I have the webcam is compatible with both.

  Hi ctbbe,
   
   
  If you have lost the CD, you can download the drivers and the e-manaul from the websites below.
   
  Follow the link below to download the drivers.
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=CEA-00001&OS=Win7_3264&lang=en
   
  Go to the link below and you have e-guides listed for download.
  http://www.Microsoft.com/hardware/documentation/default.aspx?type=LifeCam&SKU=CEA-00001
   
   
  Hope that helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help make photo S10 - 3T, a program that allows us to take pictures in camera s10 - 3T built in?

  What program allows us to take pictures in camera s10 - 3T built in?

  Easy camera to take the picture?

  Where can I download lenovo EASY CAMERA?

  Thank you

  Hello and welcome,

  with the help of the Lenovo easy Capture Knowledge Base that should operate, download Lenovo Easy Capture Windows 7 ...

  cordially KalvinKlein

• Rebel T3 does not take pictures, bright yellow flashing, please help!

  My Rebel T3 take pictures.  A yellow light flashes to before, but nothing else happens.  I tried to replace the battery, mode change, but it will not still images.  It was working fine yesterday.

  I actually tried who.  And this is going to sound like I'm stupid, but I found my problem.
  Somehow I must have hit the timer setting.  I've never used the timer before, so I didn't know it's the yellow flash light.  And I'm not just sitting here waiting to see if it would take a picture.

  Anyway... problem solved.  I feel stupid, but put the solution here just in case anyone has the same problem! Laughing out loud