Builder and switch problem?
/ * Okay guys .my problem is there are a 3 cases of first and second case I get entries and in the third and fourth cases I need to call a method that is in another class .this method does some calculations that must both user values enter in first case and 2 e caseMy problem is how I'm going to call my constructor in third case.if I say (it's not logic so) investmentM = new investments (principal, interestRate); I usually calculate correctly.well I found a way of my method to calculate the result correctly but at that moment, when I turn back on the menu at this time, he reset the values and mess up everything.if I get all values in a case its ok but I need to get them from case 1 and case 2.
in case 3 and case 4 I just did up to these manufacturer it may give you an idea what my problem is.i stuck there.do you guys have an idea of what could be the solution?
Thank you.
*/
switch(choice)
{
case 1:
double principal=1.0;
double interestRate=0.1;
Investment investmentM;
System.out.print("Please enter the starting balance : ");
principal=sr.nextDouble();
System.out.print("Please enter the interest rate : ");
interestRate=sr.nextDouble();
System.out.print("\n");
investmentM.setPrincipal(principal);
investmentM.setInterestRate(interestRate);
investmentM=new Investment(principal,interestRate);
break;
case 2:
int numberOfYears=1;
int numberOfTimes=1;
System.out.print("Please enter the number of years : ");
numberOfYears=sr.nextInt();
System.out.print("Please enter the number of times : ");
numberOfTimes=sr.nextInt();
Investment investmentA;
investmentA=new Investment(numberOfYears,numberOfTimes);
investmentA.setNumberOfYears(numberOfYears);
investmentA.setNumberOfTimes(numberOfTimes);
case 3:
Investment fi=new Investment(principal,interestRate,numberOfYears,numberOfTimes);
investmentA.getFutureValueMontly();
menu();
break;
case 4:
Investment f=new Investment(principal,interestRate,numberOfYears,numberOfTimes);
fi.getFutureValueAnnual();
break;
}
878144 wrote:
My problem is how I'm going to call my constructor in third case.if I say (it's not logic so) investmentM = new investments (principal, interestRate); I usually calculate correctly.well I found a way of my method to calculate the result correctly but at that moment, when I turn back on the menu at this time, he reset the values and mess up everything.if I get all values in a case its ok but I need to get them from case 1 and case 2.
.. do you guys have any idea of what could be the solution?
Yes: Do not use a switch statement to control this. It is clearly a sequential process, so force the user to enter the values first, and then ask them what they want to do with them.
I would also break this process in steps to methods, but this has more to do with style.
Winston
Tags: Java
Similar Questions
-
I tried to use iTunes to restore my iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the recovery mode, connection to the apple Server (the software update download was complete) and internet connection. Help? I do an Apple store to restore?
Error 17 refers to network problems. Take a look at these articles and try the suggestions:
Solve the iOS update and restore error in iTunes - Apple Support
-
Synchronization with iCloud and pictures problems
I recently discovered I was missing a few old photos Photos Apple and iCloud. It's about a years of photos from 2014. I think they disappeared right around the time Apple dropped iPhoto and switched to the photo program. I was able to locate the photos in my old iPhoto Library and was able to import them to Apple pictures - so I have them on my computer - but they are not automatically synchronized to iCloud.
I would like to have all my photos stored in iCloud - I searched the FAQ and user forums but could not find a description of this particular problem.
Any ideas on how I can get iCloud to import these newly added photos?
a few thoughts - but with so little information we can only make assumptions
1 - get up-to-date - you say you have OS X 10.10.5 - you are six updates behind - the latest version is El Captain OS X 10.11.6 - it have many bug fixes and many new features
2 communicate. us your iCloud and on Mac and on every IOS device status settings
3 - iCloud is not a backup, is a synchronization service - you need a system with the downloaded original and a backup in addition to the iCloud photo library
LN
-
can I have both versions installed and switch between the two
Can I have two different versions of firefox are installed and switch between them? If so, how do I set up.
Yes, I have several versions of firefox are installed. Firefox 3.6 is always taken in charge and course, there is the beta, the Aurora and the roads every night. I'm guessing that the other default channels install in clean places out there rather than overwrite your current installation, if not choose the custom installation option.
This is something advanced, generally used by developers etc.
CARE do not uninstall and take an option to remove personal settings, but that is written, as that attempts to remove all the profile data for all versions Firefox installed, you will lose the passwords and bookmarks etc..
Use unique profiles - where Firefox stores your bookmarks, passwords and other user data for each version, or you will have problems.
-
I have a laptop nc 6400 product number: RB518UT #ABA uses an ATI mobility Radeon x 1300 graphics card, as well as Intel (r) mobile express chipset available 965 G. I chose to use Classic desktop windows at the moment and no problem at all now. I don't know about Vsync or 2D with any partbut I disabled it Aero, windows 'themes' clear the text, mosaic with not a spec left shaows WHEREAS I could think of and still the text clears using my own slider like gum or disappears and leavesablank. Alsooccasionaly gibberish are more black lines not only any official language, but today I thought that almost a nonsense post script type to some... in some mobile tiles that can refresh, but even that does not work as it always has... I am at a loss I need a decent graphics that I use photoshop and dreamweaver allt/times a day and at least they need to exploit as much as possible. I had no problem with their execution on this computer for the past 4 years or more. It has been now 4 OS on this big machine that has not had any problems over the past 7 years. He 4gig memory and 750 GB hard drive and lack of wellis touchscreen but... not worry Windows when they checked all this to check. I am beyond my capabilities and need help. Even if I need to build my own divers I Although it will not be the fastest answer, but I can see the need to know how the alter pilots an asset right about now. Please you all the
suggestions will be an asset, as I am a "what to do now the level of frustration"and would like that much more about the reason for it. " I was just as lucky as my machine has never had issues that were close to that sort of thing.
TY for any help, answers, all possible assistance, you may think. I hope that I have provided a clear problem, and most of the information you need. I never used a service like other instances, that raising any issues that others have as well. Always helping if I wasn't sure but never as difficult a question as is happening now.
Ty for any possible assistance or suggestions that can point me in the right direction.
egcorrell
Hello:
The only suggestion I can offer would be manually install the graphics driver Vista support for your laptop and driver, page and see if it works...
BTW, the nc6400 has the mobile Intel 945 chipset, not the 965. The 6910p has the 965 chipset.
Download and run this driver... You will probably get an error of unsupported operating system.
Conclusion of any windows error.
Go to Device Manager and click on the video controller (or Microsoft based Display Adapter) who need drivers.
Click the driver tab.
Click on set to update driver.
Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp38833.
Make sure that the include subfolders is selected and see if the pilot goes like this.
Then restart.
If your nc6400 has this problem with the SMSC Infrared driver with the! Marc, I went into the BIOS, found the menu of Ports and disabled the infrared port, saved and restarted.
That got rid of the problem of device.
I don't know of anyone who uses the infrared port anyway.
-
Change username and logout problem - not supported
When the user switching or disconnection of the screen becomes black and unsupported is in big letters white, it restarts the computer, I start windows normally, then a box just telling me I was expectantly stop and windows will search for a solution, I have 3 users myself as an administrator and two others, if I start it in safe mode, you can switch or disconnect any problems. I uninstalled the last program which had been installed and tried to do a restore of the days different samples about 5 times each time I also unplugged my external hard drive in case that was the problem
Can anyone help pleaseEach of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.
Clean boot
Click Start - all programs - Accessories - run and typemsconfig
Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.
Tip clean bootIf the above does not help.
Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Go to the all tab and uncheck everything to the left.
Reset. If this resolves your wake problem half of the items until you find the one that.
Blue screens are caused by defective material or defective hardware drivers.
To see if a fix is available
In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post these details here.
To see if any recent system change caused it
In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.
Standard hardware troubleshootingFirst to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.
Diagnosis of memoryIf you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.S.M.A.R.TStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason ListIf it is on will be true, otherwise on enable in the BIOS of the computer.Predict the failure must be False if everything is ok.In Vista and later if SMART failure predicted Windows prompts the user to run the backup.Run chkdskIn computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.SFCCheck the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).sfc/scannowHeatHeat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.For memory diagnostic resultsClick on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-resultsDouble-click the entry for more details on this entry.For results of Chkdsk
Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.Look for EventID is 7 and Source disk
Look for EventID is 11 and the Source disk
Look for EventID is 51 and Source disk
Look for EventID is 52 and Source disk
Look for EventID 55 and Source is NTFS
Look for EventID is 130 and Source is NTFS
Look for EventID 1001 and Source is Autochk
Look for EventID 1001 and Source is Winlogon
Look for EventID 1001 and Source is WinInit
Look for EventID 1001 and Source is Chkdsk
Look for EventID is 26212 and Source is ChkdskDouble-click the entry for more details on this entry.PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.For the results of the SFCStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "It will be able to see which files are corrupted.To see if therefindstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|moreThere are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.Dump filesDump files are files containing the status of the machine when it crashed. We can analyze the file to identify the driver (or program) causing the accident. See the last section on how to get them analyzed by a volunteer.Analyze dump filesIf you want to analyze your own dump files.You need start exploring as an administrator to access the files in C:\windows\Minidump. Explore a right click and choose run as administrator.
Download and install the debugging tools for WindowsInstall Windows SDK, but simply choose the debugging tools.Create a folder called symbols in C:\
Start Windbg. Menu file - path to the symbol file and enter
SRV * C:\symbols* http://msdl.microsoft.com/download/symbolsClose, and then reopen WinDbg. Menu file - Open Crash DumpIt will analyze the crashdump. You must close and reopen WinDbg for each analyzed dump file. Because you download symbols from the internet WinDbg seems to be to do nothing. But it's the download. Be patient.
Looking for a driver or a library system that the incident occurred at the end of the list. Find the file, do a right click then Properties - Details tab. If it shows a driver, you will need to update the driver identified. Most of the pilots are in c:\windows\system32\drivers.Look for the drive for a file.Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type by replacing drivername.sys by the name of the file (or copy and paste by clicking in the command prompt window and choose Paste).dir c:\ drivername.sys/a/s
If it has a file system see if you can get a program to analyze - v.Type in the theWinDbg command prompt
! analyze - v-v means Verbose and if the accident was created by a program, as opposed to hardware or a driver, it will appear in the middle of the list.for exampleNom_processus: java.exeNom_image: ntkrnlmp.exeNom_processus does not appear in the output of v - analyze and only if a program is from the call that was blamed.Download them for analysisOr download files minidump to your Public SkyDrive folder and copy the link in the address bar, and I'm going to do an analysis.SkyDrive is the download file from Microsoft, Windows Live, at https://skydrive.live.com/site. Read about it at http://explore.live.com/skydrive.If you downloaded one of the Live applications or a web site based Live mail account, you already have access to your Skydrive.
Put your list of events in the Public folder and copy the link in the address bar.
-
Need router and switches for simple network tips...
I have to get a new router and switch to an office with 9 computers, 1 printer, and a server. They are all Mac computers. Two Mac computers are running Windows XP through Parrallels (not sure if it matters). All computers have just need access to the Internet (through the router), access to the printer and 5 of them on the server. A few more important details: the router will be located about a quarter of a mile away (where we could get a broadband Internet access) but will have a fiber optic cable running to the office, where will be the selector. In the building off site where the router, we would like to have a backup disk to send important files at the end of each day (or set up to do this automatically later). The optical fiber has capacity of the card. We want that the router must be connected only (wireless). Any suggestion that router and switch combo would be enough? Thank you!
You can use a RVS4400 router that has a gigabit capacity with 4 ports, connected to the gigabit switch.
-
User profile runs as an administrator for the daily work and this account is corrupted and switch every time on my laptop, just open a temp file (created), I downloaded a driver to run my cell phone as a modem while he is on vacation. and the problem started after downloading this software,
Hi johnnyroque
Thanks for posting on Microsoft Answers.
Try to use the following steps to enable the built-in Administrator account and further, then the steps and links to fix a corrupted profile.
Please start on the mode of the Windows recovery environment (WINRE).
-To start the computer into WinRE mode, insert the Vista CD in the CD tray, restart the computer.
-When you are prompted to "press any key to boot from the CD-ROM..." Press ENTER.
-Select the language by default, click Next.
-Select "repair your computer".
http://www.Flickr.com/photos/freeed/363935713/in/set-72157594490796701/
-Select command prompt, and then type the following commands:NET user administrator / Active: Yes
NET user {user account name} {new user password}Note: Please enter the user name and the password without the braces of the flower.
-Restart the computer normally.//////////////////////////////////////////////////////////////////////////////
To fix a see corrupted profile link below:
http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxPlease post back and let us know if it helped to solve the problem - thanks Ken
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Don't Flash Builder 4.7 problem - no platform BB
Hi, I installed the FB 4.7 on my PC.
I downloaded the SDK of AIR in BB Site and installed.
I tried to create a project, but there are only two platforms listed, it's to say, iOS and Android and no BB it.
Anyone faced the same problem before? 0o0o
I use Adobe Flash Builder 4.7 for my Blackberry 10 development, although I use Macbook would highlight, but I also had FB4.7 installed on the PC. It is quiet easy to install BB Developer tools on PC.
1. first of all, you must run FB4.7 with administrative control.
2. in your IDE FB4.7 Menu, click help-> install BB 10 publication support or install new software-> type "Blackberry" next to work with, now, you will see the option of ' Blackberry plugin for Flash Builder 4.7... '-> option-> check on BB OS Support checkbox statement select 10, press 'Next' then finished once installed.
3. restart your Flash Builder and try to create the new project Mobile AS3 or Flex Mobile, you will see Blackberry option along with two others.
Note: BB 10.1 and before, support Adobe AIR version 3.1 only so make sure that you have not superimposed latest version of Adobe AIR in your Flash Builder.
Ghislaine
-
I have tried to build and run the project "QXmlStreamReader" with momentics
but display as errors
The path location type Resource Description
make: * [Device-Debug] problem error 2 QXSRExample C/C++
make [2]: * no rule to make target "main.cpp", need to "debug/main.o. Stop. QXSRExample C/C++ problem
make [1]: * [debug] problem error 2 QXSRExample C/C++My project is to
CBC
main.cpp
qxsrexample.cpp
Inc.
qxsrexample.h
assets
hand. QML etc.
Reference: http://qt-project.org/doc/qt-4.8/qxmlstreamreader.html
And
http://developer.Nokia.com/community/wiki/QXmlStreamReader_to_parse_XML_in_Qt
I posted a few snippets on the forum some time ago, maybe they are useful:
-
Build and deploy the sample application Rssnews
Hi all
I'm trying to build and deploy the sample application for my Dev Alpha a. Rssnews.
I use the 4 SDK beta
He seems to build ok, but when it tries to install it on the Dev Alpha I get the following error
Deployment Failed: Info: Sending request: Install and Launch Info: Action: Install and Launch Info: Debug native: on Info: File size: 238114 Info: Installing com.example.bb10samples.data.rssnews.testDev_ata_rssnewsc73a2b56... Info: Processing 238114 bytes actual_dname:: actual_id:: actual_version:: result::failure 821 Application-Requires-System: unrecognized system name 'BlackBerry 10'
I also have an appliance version mismatch error but I belive it can be ignored.
Thank you very much
Solved this problem by updating the software Dev Alpha at 10.0.9.1103.
-
Order of port re-auth authentication and switch / stop of the session
Hi all
We are implementing an ISE (1,4) and met regarded questions on the agenda of the authentication and a stop of the session after posture in line. We got mab, dot1x as authentication order (priority of authentication is set to dot1x, mab). We have configured a reauthentication in the ports of the switch. Windows uses begging all-connect NAM (see 4.2) to dot1x and posture. During the re-authentication, either all-connecting NAM or switch does not start an eapol start and switch allows the session to the MAB, where - as when seen dot1x and mab authentication switch order generates eapol start. The switches are 3750 (15.0 (2) SE8).
Any possibility we could force the switch/NAM agent sent an eapol start during re-auth?
Regarding the posture, posture once conform for an endpoint (after dot1x authentication passes) following a judgment of the ISE manual session for an endpoint, switch creates a new session in ISE changes and switch the State of the unknown port to posture. Posture ise AC client still shows status of complaint of posture in the endpoint. It seems do not know about the stop of the session. During NAM endpoint agent session performs a re-auth component however posture remains unchanged "in line".
Does anyone have experience this problem?.
Thanks in advance.
Concerning
GA
Hi Gaj-
I had the similar problem in the past and for setting the following attribute:
Termination-action-AVPair attribute modifier = 1
Give that a go and let us know if you still have any questions.
Thank you for evaluating useful messages!
-
Configure the DHCP on the router and switch
Good afternoon
I'm trying to set up DHCP using CLI on a 2610 router and switch 2950. With my current config, the host at the end of the switch (set to receive ip via DHCP) does not have anything assigned. Here are a few shows:
Router:
Router_1 #show ip int br
Interface IP-Address OK? Method State Protocol
192.168.10.1 FastEthernet0/0 YES manual up up (leading to pass)
Serial0/0 YES no not defined administratively down down
Serial0/1 no YES not defined administratively down down
Ethernet1/0 YES no not defined administratively down down
Ethernet1/1 no YES not defined administratively down down
Ethernet1/2 no YES not defined administratively down down
Ethernet1/3 no YES not defined administratively down downRouter_1 #show ip dhcp pool
Pool acer_pool:
Brand usage (up/down): 100 / 0
Size of the subnet (first/next): 0 / 0
Total addresses: 254
Rental addresses: 0
Waiting for the event: no
subnet 1 is currently in the pool:
Range of addresses IP of Current index leased addresses
192.168.10.1 192.168.10.1 - 192.168.10.254 0Switch:
Switch_1 #show ip int br
Interface IP-Address OK? Method State Protocol
Vlan1 unassigned YES NVRAM up up
FastEthernet0/1 no YES unset upward, upward (leading to the router)
FastEthernet0/2 not assigned YES unset down down
FastEthernet0/3 not assigned YES unset down down
FastEthernet0/4 not assigned YES unset down down
FastEthernet0/5 not assigned YES unset down down
FastEthernet0/6 not assigned YES unset down down
FastEthernet0/7 not assigned YES unset down down
FastEthernet0/8 not assigned YES unset down down
FastEthernet0/9 no YES unset down down
FastEthernet0/10 not assigned YES unset down down
FastEthernet0/11 no assigned YES unset down down
FastEthernet0/12 not assigned YES unset down down
FastEthernet0/13 not assigned YES unset down down
FastEthernet0/14 not assigned YES unset down down
FastEthernet0/15 no assigned YES unset down down
FastEthernet0/16 not assigned YES unset down down
FastEthernet0/17 no assigned YES unset down down
FastEthernet0/18 no assigned YES unset down down
FastEthernet0/19 not assigned YES unset down down
FastEthernet0/20 not assigned YES unset down down
FastEthernet0/21 no assigned YES unset down down
FastEthernet0/22 YES no assigned unset upward, upward
FastEthernet0/23 not assigned YES unset down down
FastEthernet0/24 no assigned YES unset down downWhat other info I can provide to solve this problem?
Thank you.
I think that you need to configure the router-on-a-stick.
Post your DHCP configuration.
-
I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.
Ideas, people?
Hello
This problem occurs when you make changes to the computer?
Method 1: Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/
Method 2: Refer to this link: I can not print from my computer via the USB port.
If you have problems, I haveinstall updated printer drivers, see this link:
http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420Refer to this: update the drivers for hardware that does not work properly.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
See also: printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsI hope this helps!
-
OPM Build and Run on tomcat does not
Hi all
I'm new to OPA and OPM tools and any recently installed the application from Oracle Policy Modeling, so I'm trying to build and run my project "hello world", but I get on a pop-up saying this: "org/apache/juli/record/LogFactory.
I should mention that I have already configured Tomcat path in the Options tab of the server shipped with my tomcat installation path. In addition, if left blank, the same error message appears.
I'm looking for a piece of advice on how to complete the configuration of the opm-tomcat to test directly from opm project in a development environment. I'd appreciate any help you can give me.
Thank you!
When OPM start the Tomcat process, it keeps in memory the Tomcat status reports. Due to the path of Tomcat pointing to an incompatible version of Apache Tomcat, Tomcat reports a failed State, when you fix the problem (by removing the path of Tomcat) then Tomcat is able to start properly, however it does not send any immediately OPM a new status (because it has not finished to start properly) OPM will always see the previous state , and think it has yet.
You can't fix this bug, however if you exit and then restart OPM after removing the path of Tomcat, then OPM will forget any previous has no status.
Maybe you are looking for
-
I looked in tools/options/manage add-ons, but I don't see a way to change the default screen.
-
How do you install fonts in Windows Vista?
Installation of fonts help... Please and THANKS of ADVANCE! Hi, I'm going crazy for 2 hours now trying to install a font of Disney on this new laptop computer. I've done a million times on my plu top desktop which has XP and I think IE7 or 8, it is I
-
I looked at Facebook for Blackberry and was captivated. It turns out that it was developed by RIM. Are there examples to develop this a cool Interface? I was wondering if anbody can leave me the "inside secrets". I know about the extension of classes
-
Question of discovery for the DFM "stuck in Questioned state devices" device
Hello We have LMS 3.0.1 installed with DFM 3.0.4 devices display Questioned with error code "SNMP timeout" without any specific reason. The snmpwalk is coming to the unit I checked with the snmpwalk command. The only device discovered as "known" has
-
BlackBerry smartphones open word documents registered
I get the 'Internal file not found' error when I try to access saved word documents. I downloaded e-Office, but cannot perform the specified action. Help, please!