built in power supply

Similar Questions

• HP ENVY PHOENIX CTO 810-135QE - 600 watts power supply Question

  In the near future, I would like to upgrade the video card in my desktop HP ENVY PHOENIX CTO 135QE-810 GT 640 default to something a little more powerful and I was wondering if there is any details about the default 600 watts power that will help me in my decision to the next video card.

  I know that some video cards require a number of amps on the 12 volt rail and all the information that I have found previously on the power of 600 watts power supply in the computer is not in that kind of detail.

  What I read, the power is a Petrus 600W e-star 5.0 Bronze, HP Part number 633186-002.

  Any additional details and details on this power to help me determine the next video card would be useful.

  On a side note the video card, I'm currently doing is one of the next Nvidia GTX 750 TI models, thoughts and recommendations on this specific map?

  Thank you

  JCOOPER2

  Hello

  Your PC has UEFI bios, so most video cards should work.  Some video cards will work in UEFI mode and others in legacy mode, that your PC is able to run.

  When the manufacturer of the video card and/or AMD or NVIDIA specify a minimum power supply size then it is best to stick to this recommendation.  Not all power supplies are built to the same standards of quality.  In addition the internal components, temperature, charges unknown and time that the PC will be placed under the maximum load are taken into account at the recommendation of minimum power supply is indicated.

  I have not seen a power of 500 watts with 12v rating of 18A, but this does not mean that there is not. And if that's the case, then the total power rating is suspect. A video card that requires an external auxiliary power connector will also draw power from the PCI-E slot.

  Are there cases where the minimum size of the power supply is insufficient? Yes, those who might be extreme but someone can have connected to power different connectors either to avoid buying a new power supply or maybe around just the food manufacturer minimum power rating. Some may do it thinking 'I'm going on fox the Fox ". It can work, but maybe the questions later start occurred.  I prefer to get the job done right the first time. You don't need a power supply to perhaps of overload and short circuit then internally causing spikes to the components in the PC.

• Graphics upgrade of Office CQ5624P and power supply

  My PC is... Compaq PC desktop Presario CQ5624P w / graphics using nVidia GeForce 6150SE integrated & Internal 250W (100V-240V) total power: 250 w, power supply: •100-127V/8 has •200-240 v/4.

  PROBLEM: I would like to upgrade my graphics
  (but... * embedded video is not available if a graphics card is installed.) Also one but... NOTE: * built into the graphics card or the card PCI Express x 16 slot are usable at once; they are not usable at the same time.)

  Question: I will lose all functions of e/s (VGA, USB ports, ethernet port, input audio & outputs) on the graphics card integrated if I update to an EVGA GT619?

  Regarding the power supply: what are the specifications for a better diet which is virtually "plug-and - go" compatible with the Office of CQ5624P? " (between 400W to 500W).

  I'm not a great player, I'm looking for a way to use a 50 "flat screen and my pc monitor at base of household use, movies and low end games... Help appreciated... Thank you.

  Hello again FLknights,

  I can't make a recommendation, but I can give you some information. First of all, the graphics card you are looking at is a PCI Express 2.0 x 16, and who can worry because you do not have a PCI Express 2.0 x 16 slot on your Board. If you are concerned don't be there is no difference that he connects on your Board, so it should work fine.

  Looking at the two UCP will work and both leave you with room for growth if you decide to go this route. You certainly need to change the power supply though as the 250 watt installed is not sufficient for the needs of new cards 300watts.

  In addition, the graphics card supports the operating system of Windows XP to Windows 8. For me, it would mean that you should also make sure that when you go to turn off the chart embedded in the BIOS you also enable Legacy Support or material according to what you see.

  I hope this helps. Thanks again for your post on the HP Forums. Have a great day!

• Power supply necessary for Satellite 110CT/810?

  Hello

  The Junk cupboard in past I came across my old Toshiba laptop on which I am now running Damn Small Linux. The main problem is that I don't remember if that model uses a power supply or if it plugs directly into power, being built in transformer.

  On the back of model number 110CT/810 and inside the cover, it says 'Satellite 110CT.

  Can someone tell me if I need a transformer?

  Thank you very much

  Roy

  Hello

  Wow this is really an oldie but was a success and found a compatible adapter.
  It looks like a battery charger PA2436UY would also be compatible.

  You can simply try to google for the part number and I m sure that you get enough hits.

  Good bye

• Pavilion HPE H8-1121: Pavilion HPE H8-1121 - new graphics card + power supply does not start after screen HP (Revisited)

  I have the same problem as this post 2013!  Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.

  I installed a new power supply (Seasonic 620W), which works well.  I also installed a GTX 660Ti last year and it was works fine as well.  I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.

  My BIOS date is 2011.

  Where can I find an update for this?

  I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use.  Should I do back up to 7 or 8?  and then update the BIOS?  Y at - it a update for my BIOS and where can I find.

  In any case, I hope that this is a solution.  Again, this is not a bad machine to be 5 years old.

  Thanks for any help!

  If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.

  It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.

  I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS.  I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards.  I would return to the map.  Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.

  ZOTAC (they don't say anything about their product vBIOS)

  https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core

  Sapphire Technology

  http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng

  Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng

  

• What graphics card work on a p7-1026 Pavilion without a power supply upgrade?

  I just bought a Pavilion p7-1026. This is my first of all the computer set purchase because I always had my made-to-order systems. The CPU and the size of the hard drive and the plug is quite good for the price (I was looking for a cheap replacement for an old office) but I would like to make a few other updates. I'll add another 8 GB of memory, but I would also add a graphics card because I don't like the built-in graphics card.

  Is there a graphics affordable (about $100) with a minimum of 256 MB of memory, which runs on the power supply 250 watt existing and with no electrical connection needed? I watched some, but I've seen as low as 300 watts. If I need to replace the power supply, how can I find a compatible with this system. I looked at a site ('911' something) that has had a lot of listed HP models but not this one.

  Jay,

  Beyond that, you walk down this road, you really need to open the case.

  It only has 4 slots for memory and probably (2) 2 GB and (2) sticks of 1 GB of DD3-1333 PC3-10600.

  Your will does not add anything, you need to replace all with 4 GB sticks (4) If your planning an upgrade.

  New models are hard to return. You'll need to find the power supply model # for all references.

  BTW, this characterization of 250W is mounted. The (constant) nominal value is most likely 200W.

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• XPS 8500, GeForce GTX 970, power supply upgrades

  Alright Hey guys, so I did a little research, talked to a few friends and others and came to the conclusion that the upgrade of my gpu will be a good call! in any case after talking to a few people and a few computer experts I have been proposed to upgrade my gpu for a gtx 970 which I think will be great! The other question that I fell or not was the power supply will be able to handle this kind of upgrade. So after through suggestions from some other people and see what others who have improved their xps 8500 I suggested me to go with the power of 750W EVGA supernova 750 B 1 did supply (PSU) (110-B1-0750-VR) the reason behind this was expressly that he was quite a bit smaller in length to the tern I would be able to ride in the tour and that's what other people have used when starting to level of their xps 8500. Anyway sorry this is long but I assure you it is a good idea, if everything fits correctly and any other thank you GENERALS!

  EVGA is a brand, and they have power supplies are built by different manufacturers.

  the key is the letters B1 and G1, G2 or GS

  B1/G1 are built by the FSP (OK, but not great)

  Seasonic GS. (but not the best that Seasonic can build)

  Superflower G2 (and it's getting good reviews.

  the best is the G2.

  The G2 will be good, but be very tight.

  Keep in mind that you need not 750W to add a GTX 970. 550 W of the kind of clean energy is ample. 650w is also good, but I would highly recommend a high quality PSU, and I do not include the B1 or G1 in this category.

  The 8500 and the 8700 are PSU even better I can tell and there are several described in this thread.

  en.Community.Dell.com/.../19611037

• The upgrade of the power supply for Alienware R4

  I just bought a MSI r9 390 x upgrade my r9 270 came with the computer. I had a problem where as soon as I turn my graphics to the max the computer restarts. No blue no screen no error message just to the top restart as if someone plugged and unplugged the pc.

  I have this reduced to a problem of power supply as no overheating takes place. I think it is the J556T power supply provided with the original pc stock. I don't think that's the tension to keep the card will I think 18V POWER supply which im sure this card requires more volts 18 years to operate at high efficiency. If you think the same thing that I am I would like to improve my diet, the problem now is the case around the PSU doesn't let me with many options because it only having openings on the sides and PSU most now have fans in the top and bottom. What PSU suggest you.

  «How about we get your diet 1 work before to decide, it is not decent...» »...

  • Update Aurora R4 PSU
  • The ALX files: A triad of food Swaps
  • Aurora psu > research forum <> Aurora Power Supply
  • "You have to rewire the whole machine" after deleting old psu

  Tip: two cables grfx were J556T, each cable is rated @ 18amps, which makes the two tracks of 12V 18amp; you have to feed the card with every cable / each tubular structure for better performance. While each cable carries a 6pin & a jumper 6 + 2, don't let it fool you > he stlll reduced to be just a cable. Try the two cables: use one & only one connector type out of each cable...

  Tip: when the need for a "8pin", insert the primary 6pin & borrow the 2pin off the 2ndary rider

  -Aurora: How to run a card 375 watt... kind of... -

  

  -most Aurora owners who have the PSU 875 watt also have a cable that is not used in the floor case: use the...

  Here is a 375-watt + HD6990: note the grfx-RED & blu - ylw cables are deployed both 6990 has two rails 12v 18amp--> 18 x 2 = 36 x 12v = 432watts has a. Good looking<>

  To use only one cable (prim and jmpr) is to refuse access map to additional 216watts provided by cable #2. unlovely

  For these cards that need one (or two) 8pins, we do that again? --> Insert the primary 6pin, borrow the 2pin off the 2ndary rider & ask the rider on the side, unused <> kapisch?

  -the primary 6pins is the path of least resistance-

  By the way by the primary 6pins - & with the horsemen of 2ndary - the person above uses a less effective connection diagram; resistance built in the appendices of the rider:

  • because of her crimp mechanics inside the primary 6 p
  • due to the addition of 4inches of wire, it's the rider
  • because of her crimp mechanics inside the cavalier 6pin

  

  -do not 'put' the primary 6pin on the side (left), "throw" the rider to the side & borrow its 2 pin (right).

  Aurora in a solo card application, always use the primary 6pins (=

• This power supply will in a HP Pavilion G5410UK?

  Hi, Im running Windows 7 64 bit
  I Am aqquiring a power supply for my graphics card work and I was just wondering if this power supply would take?
  http://www.Amazon.co.UK/Corsair-CMPSU-650TXV2UK-enthusiast-series-performance/DP/B004O0P9TO/ref=sr_1...

  If you can not findout could you please tell me the Dimensions of the PSU that's already in the pre-built system, thank you in advance

  Hello

  You need to open your PC and measure the physical dimensions of your diet. Here is a list of the things to consider:

  1. technical characteristics
  2. the total power - important
  3. amperage 12 + v - important
  4 modular - is not required, but I like the flexibility
  5. guarantee
  6 i7 and SLI ready
  7. energy efficiency
  8 cost
  9. size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
  10. a single + 12 volt rail is a better choice.

  The Corsair PSU that you mentioned could fit but measure just to be certain. It's a two way street and you have to do some work.

• Power supply Dell Optiplex 790 SFF cycles power on and off when it is plugged

  My new to me SFF Optiplex 790 does not start - pressing power causes a switch to send amber for a few seconds, the 1 + 2 diagnostic lights shine briefly, and then the system turns off. But wait... with power plugged in, it will try to restart every 10 seconds or until I have unplug the unit.

  System lasted about 30-40 minutes when I tested it, but it starts then power cycling.

  Power supply passes with built-in 'green light' regardless of any internal or external devices connected. I bought a sweater 'work' PSU, no change.

  Ideas for testing? System is stock, no mods or upgrades of what I see.

  Hello

  This system is out of warranty period so that any replacement of parts will be payable. That's why we can help you with the replacement of the part by sending the request for quote for parts and service or, Alternatively, you can buy the part of any provider of local service from dell.

  Serial number of the system also has information on the customers system so donot share it as a public message, send it out via private only message.

  Kind regards

• G4 MDD power supply Issue

  My MDD was recently stop only two or three minutes after a cold start. The power led lights up, the gray screen with the Apple logo appears with the spinning wheel, but then the machine suddenly loses power as if the power cord was disconnected. These are the things I've already tried:

  1. Removed the PRAM Battery
  2. Disconnected all devices except the keyboard and the monitor
  3. Tried a different power cord

  Start in safe mode did not help. The fans are all running, the red LED lights on the logic board and disk drives seem to work. This could be a power supply issue or a problem with the motherboard and is it possible that I can definitely identify the problem without being able to start the G4? The startup time has been considering more when everything worked last week, would that be a clue? I've owned this machine for more than twelve years and it put to the test so I wonder if it's time to retire him.

  Thanks in advance for any help you can offer!

  Hi, looks a lot like a problem of heat from the CPU, thermal paste is usually good for 5 years or more.

  It runs longer open door?

• 29W power supply will work for iPad 9.7 Pro

  My iPad Pro 9.7 inches provided with a power of 10 watts. It takes about six hours is responsible for the depletion of the layer to be 100% responsible. I would like to be able to do it faster. I noticed that the iPad Pro with a larger screen has a 29 Watt power supply available in the Apple Store. I bought this with the cable Apple to convert USB type C USB 2, which I am connected to my Flash a USB cable.  When I try on my Pro 9.7 inch iPad it charges no faster than six hours. Anyone who has tried using a larger power and they have managed to improve the loading time?

  The smaller iPad Pro does not have lightning speed USB - C compliant connector which has the bigger iPad Pro, so the special USB - C cable and 29W power supply wiil lightning does not work with the smaller iPad Pro to load more quickly.

  Return these back to Apple for a full refund.

  Sorry

• Fan of mid-2010 MP in power supply

  The fan in the power supply of my Mac Pro (mid 2010, OS 10.11.5) began its decent slow in death - intermittent squeaking. I hesitate to pay a few hundred dollars to replace the power supply just when a fan $ 20 will most likely do the trick.

  (1) is that someone can confirm that the fan is replaceable? iFixit.com wasn't much help to answer this question, or for parts. Here's their entry: https://www.ifixit.com/Guide/Mac+Pro+First+Generation+Power+Supply+Unit+Replacem ent/32222

  (2) even in the case that does not know the answer to question (1), I want to give it a shot; can someone point me to a source of parts other than ebay.com, galaxyhp.com or Low End Mac google group? I'm happy to install an after-market fan, unless this is not recommended for a reason any.

  (3) any other suggestions? (If the bearing is not tight, I'm curious to know if I can just pack the her with the fat.)

  Thanks in advance!

  I would try a few drops of Marvel mystery oil, he made fans years beyond their phase of freezing/grinding...

  http://www.marvelmysteryoil.com/index.php

• Power supply on the move...

  What link should I plug my USB 2 plug in my power supply for my MBP 13 '' end 2011...

  None of them. The USB ports on your MacBook Pro are not designed to provide a high current to charge a power supply.

  In case you were keen to use it to power your MacBook Pro, you should know that your MacBook Pro will not charge or run a USB power supply.