Bumper case?

Similar Questions

• Bumper case is cracked.

  Well, it was great while it lasted. Nice box but he snapped at random and just noticed when I pulled out of my pocket.

  No, this is what you want

  http://www.Motorola.com/us/accessories/cases-shells/anti-shock-cases/tough-frame-bumper-for-Moto-X-pure-Edition/Moto-x-pure-tough-frame.html

• BlackBerry bold 9900 broken smartphones

  I've had my blackberry "BOLD" for about 8 weeks now. I went shopping yesterday and put my laptop in my bag in hand, he had a bumper case. When I went to take my phone out of my bag in hand to use, the screen was cracked. Its still in full working condition and did not have any other brand on it.  I don't think it should have happened after 8 weeks to have and I don't think it's irrational or foolhardy to put a cell phone in a bag in hand, so im thinking that it may be due a fault in the screen. his o2 of ith on contract and do not know what to do with nxt. It will still be under warranty?

  I don't really have an exact figure. But it should be around $ 100

  You can go through everything according to your convenience.

• Apple Watch series 2 protective case

  Hello

  Has anyone found a real Apple Watch S2 case? You are looking for a minimalist design, to display the watch itself without inhibiting its look, then perhaps a clear case (case bumper or other) will do.

  All cases online specify that they are cases Apple Watch S2, but look further into what they are not, as many of them do not account for the new air port (hole on one side, not two) and are also not the right depth, and cutting a port speakers are designed for S1 S2 not.

  You will need to protect my camera, I do use it in the gym a fair bit and worry about the damage.

  Thanks guys and girls!

  Hi RudeBwoy!

  I had the same problem. As far as I can see, case or bumper for the AW 2 series do not exist. I talked to Spigen, catalyst and a couple of others and any sites third 3rd say... manufacturers confirm that their AW products are NOT compatible with series 2 Watch, and that they are working on it!

  All thoughts of good screen protectors? !! They would be compatible? Some protection is better than nothing!

  Let me know if you hear anything!

  Thank you

• Do I need a case for my Apple Watch?

  I just bought the sports watch (38 mm with Silver Aluminum case) and I'm trying to decide if I should buy a case. I know that watches are made to be durable enough and I really prefer not to sacrifice the design but I'm worried that I would need the case. I work a lot and teach fitness classes - a case would be useful in the watch of sweat and bumps protection against equipment? Colleagues who have the shows say they are ok with a case, but I'm worried he might get banged up in the gym. Also, I work in a restaurant, and think that the case might help against protect them against damage from water. Any advice?

  Hello

  The answer to your question is a matter of personal preference.

  It may be useful to read the comments of the protective case on a site like Amazon.

  Issues with Apple Watch cases / protectors (in general) understand that they can, for example: fall pretty easily, reduce the sensitivity to touch, scratch quite easily get moisture dirty (on the outside), trap or trap small items of debris under them (which can cause scratches on the case or display).

  With the help of a case can make it also more difficult or less convenient to monitor your own and dry. Cleaning and drying of your watch are recommended, for example, after exposure to sweat and other liquids in order to maximize comfort and avoid damage to long-term of the watch.

  More information:

  Cleaning and port Apple Watch - Apple Support

• iPad Pro 9.7 cases

  OK, so I moved a bunch of cash on a new Pro 9.7 "iPad, Apple pencil and a smart keyboard. I also had a Zagg protective Glass screen. Unfortunately, the back of my beautiful iPad is not yet protected, leaving is sensitive to all kinds of scratches, scrapes and bumps. I need a case that will protect the back of the iPad, hold the smart keyboard, being able to hold the iPad in horizontal or vertical (aka portrait or landscape) and have a place to store the pencil, otherwise it will be probably are lost or dropped several times. After Googling a bit, I was unable to find a case that meets all these requirements. Does anyone have any suggestions? Thanks a lot for any input.

  I have an iPad 9.7 Pro, an Apple Smart keyboard and I use it with the silicone Apple case.  The case offers great protection for the back of the iPad and works well with the Smart keyboard.  I don't have a pencil of the Apple, so I have nothing to recommend relatively to a deal that would also store the pencil.  Hope it will be useful to you.

• It takes case or cover?

  Hello!

  I have my Moto X 2nd generation (32 GB) last week. And the Android, as well.

  My serious doubt is whether to use the entire cover or deal with it. My Moto X is in Royal Blue and it looks / feels great as it is. But I heard a lot of things that the display glass is likely to break even with a fall from a low height to the ground.

  In India, bumper of good quality is not yet available. I bought a back cover, but she does lose the identity of my phone!

  All phones with glass screens will be break if they fall. Maybe not the first time, but all are sensitive. The Moto X is not worse, then all others - but the biggest screens, less bezel on the sides, means more chance to break the glass. Look at the iPhone 4 and 5 - glass on front and back - guaranteed to break any fall.

  That being said - case are a personal preference. I have not used with any smartphone glass, and I've never broken a phone. It does not mean that I can't break a phone, just that I chose to take a chance that I am careful enough.

• Little damage "bumper".

  Hello

  IAM again on the forum and I registered because of my problem:

  Xperia Z3 has these bumpers on every corner.

  One of them is missing on my phone, he fell accidentally when I took my phone out of my pocket. (The bumper is missing, so I can't put it back on)

  I went to "The Phone house" a company that works with Sony, they told me that everything that my phone will be deleted?

  Is this true? What should I do now?

  I can't buy these things and put them on myself?

  in any case, search eBay for "Xperia Z3 4-piece corner of housing set" and you will get results for all colors.

• BlackBerry 10 classic Otter for BB case would help sales...

  Dear Blackberry,

  All Blackberry phones that I have owned, including my current model, was fitted with a case of Otter to protect it from bumps and drops.  These cases are fantastic!  If my wife does not use a Blackberry, she protects her phone with a case of Otter.  Please CONTACT OTTER CASE WITH THE CLASSIC SPECIFICATIONS SO THAT I CAN MOVE on to a CLASSIC BLACKBERRY without fear of destroying my phone to live without a protective case!  Thank you!

  As well, I was looking for to get an OtterBox for my classic.  Unfortunately they have not produced a still.  However, I found a very similar case produced by Incipio and for a very reasonable price.  I had the OtterBox commuter case for my 9900 and loved (I give it a 10 out of 10).  The Incipio would get a 8 out of 10 simply because the rubber compound seems a little more difficult, and the case does not come with a screen protector.  I am, however, very happy with it and would not my classic without it.  The case is called "Shine DualPro" and you can buy it directly, but I found it in a local store for the same price online store (so no additional shipping charges).

• Case of blackBerry Smartphones? The ringer volume?

  Hi just got my first blackberry yesterday and I'm a bit confused about two things... I hope someone can help.

  First of all, what exactly is the case... I noticed on some of the volumes alert there one in and out of the Holster option. I was wondering what it means? I know that is the case, I am just confused with the thing of the entire volume.

  Second, is there a way to lower the volume of the ringtone, I know that you go to profiles and I have it on normal and the ring tones and text are very LOUD. Is there a way to lower these volumes other than silenting them.

  OK, I lied three things...

  in the profiles, which is the only option of phone for?

  I'll try and these for answer you.

  1 case is the black leather cover that is in the box when you bought your BB. It has a magnet on the front which puts your BB sleep when it is inserted and prevents dust and bumps occur.

  2. volume of the ringtone, go to options and scroll down to the tip and you won't be able to adjust all volume, ringtones, etc. of their each profile.

  3 phone only option is exactly that. Only the phone will ring at least before you change the tones/Ringer.

  I hope this helps.

• Z Play bike + protector bumper Incipio connected

  If I buy the bike Z Play and put the battery mod, is there a bumper to protect the phone on the edge?

  Motorola support is nonexistent. Those who have the same question may find that it answered here:

  Case of the bike Z Play + Incipio battery Mod:

  http://Forum.xda-developers.com/Moto-z-play/accessories/case-Moto-z-play-Incipio-battery-mod-t349634...

• Case when the field IS NULL then... end

  Hello world
  
  (a) If a field is null, display a message.
  
  (b) the field shows beak null. application for admin to make outer joins between the tables.
  
  (c) I have 9 rows, 3 have NULL values,
  So, I want to show a literal message on 3 rows.
  
  problem is that the message shows on all the 9 lines.
  
  
  now:
  ====
  I could have adopted an approach very unorthodox at this request, please bear with me.
  I work for a college and am interested in students who did not encourage the "" in the last six months
  for this semester, beak. they repeat the year.
  
  200830 M1 generally promote to 200920 M2 (m1 attribute replaced by m2)
  
  M1 - 1 year 200830 = winter
  M2 - 2nd year 200920 = fall (200910 is special and not interested by this semester for this request)
  
  
  I want to run a query to search for the students who did not encourage.
  
  hand the sql would be:
  
  SELECT st1.id
  st1.name
  sa1.academic_period
  sa1.student_attribute
  sa2.academic_period
  sa2.student_attribute
  Student st1
  INNER JOIN student_attribute sa1
  ON st1.person_uid = sa1.person_uid
  AND sa1.academic_period = '200830'
  AND sa1.student_attribute = 'M1 '.
  LEFT JOIN student_attribute sa2
  ON st1.person_uid = sa2.person_uid
  AND sa2.academic_period = '200920'
  AND sa2.student_attribute = 'M2 '.
  where st1.academic_period = '200830'
  and sa2.student_attribute is null
  ORDER BY st1.name;
  
  
  ===========
  
  taking the hardcoded values and putting a LEFT JOIN simplified in a display/custom folder
  and then by creating the conditions in discoverer, essentially behaved as an EQUI-join and do not show the
  null lines
  
  =============
  
  I compare a "slice" of data "another" data 200920/m2 200830/m1
  
  so I begged the admin as an experiment to "clone" the desired table as 2 views and external to join them
  Discover the left join to student attribute #1 to
  attribute of student views #2
  
  
  and using the technique to deceive the discoverer of a LEFT JOIN in: student_attribute is null or student_attribute is null
  
  I got what I wanted - pupils with NULL values in attribut2, beak. they did not encourage
  
  ==============
  
  so now I wanted to create a new discoverer in copying the above query query and adding new 'logic ':
  
  In this new queyr am interested if the student extensible query determined #1
  have been coded by the staff in order to take into account that they repeat:
  M1 200830 as:
  M1 200920 (their bump up current semester with the same code attribute)
  
  so I thought... hmmmmm... I also have the ordinary table: attribute of the student
  now watch a 3rd data slice: 200920 m1
  
  
  Discover the left join to student attribute #1 to
  attribute of student views #2
  
  left to join University
  attribute of student views #1
  
  I access the beak ordinary table this pre-established join :
  
  University to join
  student table attribute
  
  ====================
  so my 2nd query uses:
  -Discover the condition attribute #1 student: 200830/m1
  -Discover the condition attribute #2 students: 200920/m2
  -University studies
  -condition of table student attribute: 200920 / * m1 *.
  
  
  and to maintain the table: attribute of student for M1 200920
  to see if records created the current semester for Extensible students staff
  
  
  This query has worked, got the 9 lines, of which 3 had to be coded to 200920/m1
  For lines 3 nulls, want to create a calc that would show this literal:
  
  "needs 200920 m1 folder.
  
  the problem is the literal is printing even on rows that have a value in the fields from the table, it's the calc:
  
  
  BOX WHEN (period DMC_Student_Att2.Academic IS NULL) THEN
  
  "NEEDS" | "'-> ' |: Parm_AcademicPeriod_Current |" " ' || : Parm_StudentAttribute_Prev
  
  END
  
  
  Any advice that might work with this unorthodox approach would be greatly appreciated,
  Advice to the other approaches would be also appreciated, tx, sandra

  Hi, Sandra
  When you work with outer joins, with that I conclude with a double whammy an OR statement allows me to make some incredible manipulations.

  For example, if you have a folder that the master joined the detail folder B with an outer join on B you get records from one if they exist in B or no - no?

  It doesn't have to be the case, you're just limit your way of thinking. It must get off the beaten and tell ourselves, if I could force discoverer to create a subquery with the NULL filter outside, I could find these B that don't have any corresponding entry in B, or I could find who had only the entries in the two.

  Let's say there's a STUDENTID b, using a normal like condition: B.STUDENTID IS NULL will not work because of the outer join. But if you create a Boolean condition, like this:

  B.STUDENTID IS NULL or B.STUDENTID IS NULL you will see amazing results.

  This tip can help.

  In which your question, taking the knowledge above, I was wondering what would happen if you did:

  BOX WHEN (period DMC_Student_Att2.Academic IS NULL) OR (period DMC_Student_Att2.Academic IS NULL) THEN

  "NEEDS" | "'--> ' |: Parm_AcademicPeriod_Current |" " ' || : Parm_StudentAttribute_Prev

  I am not sure it will work. If it isn't then you need create 2 worksheets, one containing the students who made the promotion and the other for those who do not. You need the conditions to make this work, one like this:

  * (Period of DMC_Student_Att2.Academic IS NOT NULL) OR (DMC_Student_Att2.Academic period IS NOT NULL) *.

  and other like this: * (DMC_Student_Att2.Academic period IS NULL) OR (DMC_Student_Att2.Academic period IS NULL) *.

  Best wishes
  Michael

• In any case of transition to what source of image change?

  I have a picture of this source of changes according to the option that is made by the user, so it can change often, I would change a bit smoother. I was wondering if there is a way to add a transition when the source is changed?
  
  Thank you.

  Hey John,
  Sorry, but I was rushing yesterday and my sample code was not fair. I have attached the code revised and updated also the sample application, if you want to download it:
  http://www.anaheimjobs.NET/samples/imageswap/

  @Amy, I use also a completeEffect on it during the first load application, but it does not control FX on the image which is "unloaded", only the "loaded" image, resulting in a quick "bump" while the first image is unloaded. It may not disturb most people, but I think it's too jarring. There may be an event that would focus on the image of unloading, but I'm not sure what it would be. If there is one, the FX could do everything online with no ActionScript required and this can be more effective. But as is the case, change the image is required AS of anyway, so adding another line of code to play the effect isn't too bad.

  Anyway, if anyone knows an event raised when an image is unloaded, I'd appreciate hearing about this. Thank you!

• 7 leather Apple iPhone case

  Just got the black leather for my iPhone case Black 7.  The finish on the leather is slippery in my hand, will be leather percent and easier to hold after a period of use?

  Hmm, probably not.  You can consider a case for Apple.  They resemble leather cases, but they are more sticky and have a more sticky feeling.  Good luck.

  Let us know what you decide :-)

• Leather case does not perfectly match iPhone 7

  I recently bought the Apple black leather cover for my new iPhone 7. After putting on the phone, I noticed that it is not firmly on the edges. I can hear the Squeak of leather when I apply a light pressure on the sides (this happens when you hold the phone). I compared it with leather for iphone 6s cases; they do not have this problem. For an expensive case it should perfectly around the phone. -What other people have experienced? Any statement of Apple? It is interesting to go to the Apple store for?

  Thank you

  Hello

  If you are concerned about a manufacturing defect, contact Apple support (mail service may be available) or make a Genius Bar reservation so that your case checked and, according to the decision of Apple, replaced:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/