Burner DVD R60 questions

Similar Questions

• Burn DVDs with Imac 2015...

  Hello Forum,

  I just updated my Imac 2011 and bought a newer Imac 2015 and I forgot it doesn't have a DVD/CD player.  Question I'm looking for recommendations on what to buy to be able to burn DVDs, play, DVD and CD.  I have customers who still use the DVD and need to burn and create menus that I am probably able to do with DVD Studio Pro?

  Thank you!

  -Tony

  Apple sells an external USB optical drive specifically for use with models that do not come with an optical drive. You will find in the store.

• Burning DVD - R

  I recently bought a laptop TouchSmart tx - 1027ca, as well as support for laptop from HP that I have the laptop usually sitting in tablet mode.  I was wondering if the DVD can be burned at this angle, or if it must be flat on my desk.  I use currently stand is more high angle, but I guess I want to know if it is possible to burn at any one of the three angles.  Also, assuming you can burn at this angle, y at - it no worries about data not being not saved properly compared to if the laptop flat seat.

  I'm sorry if this seems to be a stupid question, but I couldn't find the answer anywhere and just wanted to be sure.

  Thank you very much in advance,

  J..

  OK, ok... just for the pleasure of making this post solved (which I hope it will be Lethal), yes you can burn DVD-R at any angle with the support and there is no data corruption. (This can also be confirmed by the fact that some desktop computers are designed to lie flat on a desk like standing vertically in a position to 'tour' and it is possible to burn media in this position without any problem).

• Equium L20-197 does not burn DVD

  Hello

  I've had my Toshiba Equium L20-197 for more than a year. I have problems with the DVD burner. He is able to play DVDs, burn CDs and play perfectly fine CDs, is not just to burn DVDs. Had this problem for months, I was wondering if anyone knows a solution for it!

  Secondly, a question more than a question. Is it possible to set the "Play/pause" media key to open an alternative application to Windows Media Player? I use Winamp, and it would be nice if I could take a break using this button and I not WMP opens in the process!

  Thank you

  Astiak.

  Hello

  First something about burning your DVDs of problem.
  Have you tried to burn different types of DVDs? I mean if you have tried different brands of DVD?
  I use only the TDK CD and DVD and I am satisfied. But this does not mean that the TDK will work with your hard drive. The fact is that not all readers of support all media.

  In any case, do you have an error message during the burning process? Have you used different burning applications? I only use one program for burning (Nero) and I do not mix the burning software. I noticed that the sonic program installed on the laptop could have a negative influence on the burning process.

  But on the other side, it is possible that disk and that only aid failures.
  Especially the lens of the drive can not calibrate properly and so the CD / DVD cannot be recognized or burned.

  Now the button configuration media;
  Unfortunately, the buttons are configured fix and it is no longer possible to use WMP if audio CD has been inserted or with WinDVD if the DVD has been inserted.

  I hope I could help bye ;)

• I have portable E1 - 572 and my dvd burner will not burn DVD

  I recently had to buy a new hard drive and had to format and reinstall everything and do it manually display etc drivers, but did not do anything with the disc that the driver is already there v1.10 and no problem. I tried different burning software and it still won't burn DVD it will burn CD so the burner works someone can help with this question?

  Problem solved

  The dvd burner is fine. a couple of dvd discs were bad and unwritable. got a new batch of tesco and wala it works great and burns very well!

• Windows 7 starter edition will not burn DVD and will not format

  • My recorder DVD format player, will play and burn DVDs when I move my dvd drive to another computer running windows vista
  • It will not burn a dvd or format a dvd rw disc when it is attached to my netbook toshiba running windows starter 7

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Engraving for Windows 7 Info

  If your computer has a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. Windows Burns discs in the active file system format or in ISO image format, depending on which disc format you choose.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• burned dvd movie maker does not show the title screen

  frustration of DVD maker

  In Windows movie maker, I made a movie of my Christmas video.  Went to publish in the machine to wdvd, added all the features (title, menu, scenes, notes, etc.); very well presented in preview.  The dvd is burned, but it ended without the added features (title, menu etc.).  And I present more than once and still not.  What could be wrong?

  Vista Movie Maker 6 or Windows Live Movie Maker?

  Might be interesting to try to publish (save) your Movie Maker
  the project in the. WMV video format to a folder on your hard drive
  drive. Then import them. Movie in DVD Maker WMV file.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html and... it might be interesting to try to disable all the video/audio
  the filters... See the following link:

  Windows 7 - video filters in Windows DVD Maker: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions

  The following articles might offer something useful:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Windows Vista - solve problems with creating a DVD-video using
  Creating Windows DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  (1) creating video DVD with Windows DVD Maker (part 1)
  http://allcomputers.us/Windows_7/creating-video-DVDs-with-Windows-DVD-Maker-(part-1).aspx

  (2) creating video DVD with Windows DVD Maker (part 2)-
  Add your photos and videos, and definition of the order of play
  (part-2)---Adding-Your-Pictures-and-Videos,-and-Setting-the-Play-Order.aspx http://allcomputers.us/Windows_7/creating-video-DVDs-with-Windows-DVD-Maker-

  (3) creating video DVD with Windows DVD Maker (part 3)-
  Set playback and DVD burning & DVD Menu Customization Options
  (part-3)---Setting-the-DVD-Burning-and-Playback-Options---Customizing-the-DVD-Menu.aspx http://allcomputers.us/Windows_7/creating-video-DVDs-with-Windows-DVD-Maker-

  (4) creation of video DVD with Windows DVD Maker (part 4)
  http://allcomputers.us/Windows_7/creating-video-DVDs-with-Windows-DVD-Maker-(part-4).aspx

• How can I tell what kind or type of format in my computer? cause I can't burn DVDs to play on Home DVD player. Only when I burn the movie it burns but only playing the portable DVD player or a laptop

  I would like to know someone can help please an explane to me how can I find out what type of format in my computer cause I have download the movie, but I also burn, but it play on a DVD player cell phone and a laptop. People say the format in my computer and it true? I went even if different format to find and download to see if work one I went though a lot of DVDs trying to find the right. I need help please.

  Thank you

  Hello

  read this on the engraving in the mastered Format;

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a disc using the ISO image format

  Choose the size of the ISO image when you need a highly compatible disc that will play in computers with an older version of Windows or in devices such as CD and DVD players that can play video files and music digital. For more information about choosing a disc format, see which CD or DVD format should I use?

  1. Insert a writable CD or DVD CD writer or DVD in your computer.

  2. In the dialog box that appears, click on burn the files to a data disc.

  3. In the engraving, a disc dialog box, type a name for this disc, and then click Show formatting options.

  4. Click on ISO image, and then click Next.

     An empty disc folder opens.

  5. Open the folder that contains the files to burn and then drag the files into the empty disc folder.

  6. In the toolbar, click on burn to disc.

     The selected files are copied to the disk. When burning is complete, the drive tray opens and you can remove the drive. You can now use the disc in another computer or media. This type of disc has no need to be closed.

  ____________________________________________________________________

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions

  ___________________________________________________________________

  Should which CD or DVD format I use?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

• Director of Windows burn my home movies but the burned dvd has no sound, what's wrong how to fix this?

  Problems burning my movies, no sound on jvc movies and mobile avi those screen is half green and has sound, why? How to fix it. Playback movies in the media window does not work also, they stick and the film forward in jumps with his normal performance but photo second jump of some gaps?

  Hi darrenmitchell,

  You can configure the computer to boot & check if you can burn DVDs. It will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  For more information about Windows Live Movie Maker, you can follow this link.

  http://explore.live.com/Windows-Live-Movie-Maker?OS=other

  Reference: Video filters in Windows Movie Maker: frequently asked questions

  Hope the helps of information.
  Please post back and we do know.

• Burned DVD using Windows DVD Maker times only once on my Blu - ray player

  Original title: burned dvd

  When I do a cd burned with my windows dvd maker, dvd will play only once on my blu - ray player separated from the TV.  It works fine the first time, but the Player cannot find the disc any time after that.  I use dvd + r discs.  Is there a formatting problem, or do I need to get the dvd + rw discs.  I'm really at a loss.  Thanks for your help guys!

  Hi frapachino21,

  -The problem occurs with all CD/DVD you burn using Windows DVD Maker?

  -After playback of the disc on the Blu - ray drive, the drive is not detected on your desktop/computer laptop with no problems?

  To use certain kinds of CD or DVD discs outside of your computer, you must close the session, which is a process that prepares the disc to be read by other computers and players.

  You can try to close or finalize the CD/DVD and check if it makes a difference.

  Also see the following articles:

  Burn a DVD-video disc

  DVD-video burning: frequently asked questions

  Why my CD or DVD does not work in another drive?

  Disc burning: frequently asked questions

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• CDDVDW ts-l633m does not burn DVD

  Hello

  I have a HP probook 4310 s with a system of Windows XP mode and a cddvdw ts-l633m driver.
  For some unknown reason, the driver, who is supposed to be able to burn DVDs, is unable to do. When I insert a DVD, it does not recognize as an accessible media in writing, it only recognizes as a readable media. However - it burns CDs very well.
  I used several different DVD available in writing and made sure the batch I bought was not defected.
  Anyone has an idea why my DVD writer cannot burn DVDs?

  Thanks in advance!

  Hello

  You might have a disk problem as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  DVD/CD have a tolerance + - and you have to write on the side outside their tolerance.
  They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ==========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). It's not unusual for 1 or 2 parts to not
  function, while others do so correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates
  and the correct registry entries for your car.

  Here are the keys to what I believe are the ones in question - for the CD/DVD drive subkeys
  course because there will be other subkeys in these keys. Do not forget to ask involved specific keys
  as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD drive won't burn dvd or read burned dvd but will play store bought dvd

  TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem

  Hello

  Have you tried to close all programs and then insert the disc in the drive?

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
  However, it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.

• I am considering buying Adobe Elements of site 10 or later, I have to be able to burn DVDs "s of large MOV of my digital SLR.

  If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with the elements and may itself make the compression... I know it can burn DVDs...

  Double question If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with el

  Premiere Elements (where you your other questions) includes a subset of the features of Premiere Pro and more

• Why is out CPU maxing out at 100% when burning DVDs?

  I bought the first 13 items yesterday and got my dvd ready to go. I started burning today and it's been over an hour and still the treatment, it may have taken 1.5 hours total. You try to run photoshop at the same time was very slow photoshop so I checked the resources I've seen the first was using 99% of my cpu, even after the closure of photoshop. When the screenshot was taken, it's 93% encoding and down a little. I have a 3.4gz i3 dual core and have never seen it go above 50% and even that was just a tip. The system has also 8 GB of ddr3 ram on windows 7 64 bit.

  Burning DVDs seems to be made but the program responds, it is now fluctuating between 0 and 5% of my cpu, but is still not responding do not. It doesn't have the program not responding, frozen error and I wonder if it is fired.

  

  digitaldoodlebug

  Thanks for the reply and in view of the comments.

  Please stay with the option 'Fit content space' with a check mark next to it.

  The only time where I disable that option by removing this box is when I get an error of data rate that forces me to remove this box so that I can manually adjust the flow to lower the value to enable the process to proceed.

  783 MB to 1.69 Mbps (megabits per second) is certainly the game of bitrate more low quality. The maximum bit rate in Premiere Elements burn on is 8,00 Mbps.

  If you are using a standard DVD disc (4.7 GB / 120 minutes), in reality, 4.7 GB 4.38 GB is the capacity of your drive. Premiere Elements burn on DVD using a variable bitrate, which means your Mbps max 8.00 will vary in DVD production.

  If you see a No Disc error in the mixture, it's another question... There is a known error in 13/13.1, requiring the removal or disabling of the OldFilm.AEX file. It has been written here a lot.

  Local disk C

  Program Files

  Adobe

  Adobe Premiere Elements 13

  Plug-ins

  Commune

  NewBlue

  and in NewBlue folder is the file OldFilm.AEX that you remove or disable renaming of OldFilm.AEX to OldFilm.AEXOLD.

  So, please watch that, leave the check mark next to fit content space (if 8,00 Mbps is much less than 8.00, consider a Double DVD face single-layer (8.5 GB / 240 minutes, 7.95 GB actually).)

  We will follow your progress. Any necessary clarification, please ask.

  Thank you.

  RTA