Burning CD failled... Error (-50)

Similar Questions

• Burner CD DVD error dirty

  Bought a laptop HP Pavilion 17 "last Christmas.  I was facing DVD hard drive since then (proably more than 1000 so far).  The DVD - RW has been intermittent and have used external DVD RW.  Portable DVD burner returned an error saying today 'CD burner dirty' and wouldn't read DVD.  Is there a solution to clean easily, or should I buy another internal DVD unit?  Thank you

  Hi @JFish53,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand you are trying to copy DVDs to portable hard drive, but it has stopped working and gave you an error message "CD burner dirty."

  Here is that a document can help:

  HP computers - drive cannot read disks (Windows, 10, 8)

  Let me know if it helps.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Problem burning DVDs. "Error in device - device target is not suitable for use.

  Hi all

  Initially, I had many problems with PE8. However, the update of nVidia Driver resolved most of them.

  Just thought it was important to note the success, but also failure!

  However, one problem remains. I get the following error at the level of the mark of 96% when burning. "Error in device - device target is not suitable for use. It is always the mark of 96% and the program is "[something] compilation" when this happens.

  After searching this site I noticed that the user rgferg posted a similar problem 13 days ago has been redirected to repost in a different place, but never did.

  I tried to burn a clip 1 hour 4 times and each time I chose the slowest burning speed (8 MB/s), as suggested. It seems that the lower support is a culprit, so I bought some Verbatim DVD media - R [quality] try in my optical drive SATA Phillips. I'm skeptical it will work, but nevertheless open-minded. I'll give it a whirl when my computer has stopped capturing VHS, I train.

  Whenever combustion not not the disc was ejected automatically and the burn process actually started and progresses maybe about 40% or more.

  That tells me it's a question of sharing, rather than issue a support. Somewhere on this forum, he suggested that I go through a process of 20 stages and remove/disable each piece of software that can compete with the first, among other things. IF I do this what do I burn through the outside of Adobe? What I need imgburn or whatever it was called? What happens if I like Nero? Nero 6 has worked very well for me for 3 years.

  So I am ready to uninstall my old optical drive burning software, who out there can recommend commercial software which, for them, creates a painless Adobe burning experience without errors or conflicts? Perhaps there is another solution that I've not seen on this forum?

  I am running Windows XP SP3. I have the latest nVidia drivers for my cards SLI GeForce 7600 GS. I have 3 monitors. RAID 0 SATA, 2 GB RAM, Athlon X 2 5400.

  Justin.

  Since you are apparently able to burn to a folder on your hard drive, but not directly on a DVD, the problem is most likely that another program (Nero, for example) is interfering with communications between Premiere Elements and your DVD burner. This is very common.

  Rather than fight with it, the easiest solution is simply to burn your files on your hard drive and then use Nero (or whatever your burner program) to burn the VIDEO_TS folder to a playable disc. This process takes no more time and offers a number of advantages, including the fact that he make several copies of your DVDs very easy.

• My Windows Media Player 10 does not burn a CD error Code COOD10BA

  I can't have the Windows Media Player to burn a CD. It gives me an error Code COOD10BA.

  Hi Rebecca,.
  Welcome to the Microsoft community. Sorry for the delay in responding.

  Since when are you facing this problem? Have you done a recent software or changes to the material on the computer?

  Generally, this error code is generated when there is a problem with the audio device, such as a map his or her controller.
  Windows Media Player C00D11BA error

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Burn a CD error message

  I got this error message when I try to burn a CD "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged". There is nothing wrong with the CD and burner is part of my laptop so I know its place hook properly.

  I got this error message when I try to burn a CD "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged". There is nothing wrong with the CD and burner is part of my laptop so I know its place hook properly.

  ================================================
  It is possible that your burner needs maintenance or replacement.

  And the following items may be worth a visit:

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060
  (Windows XP / Vista / 7 / 8)

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

• CD/DVD burner not Inislise, error 37. What iswrong?

  Watch on the device with a Manager '! ' but not shoh on 'my computer '.

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Qosmio F60 - error when burning Blu - ray discs

  I have a Qosmio F60

  Recently, I tried to burn my data on BD - R 25 gb disc. Aftre burn about 6 GB of data, it stopped burning with unexplained error. I tried another disc with the same problem. This time the suggested message updated firmware. This is MY * A BD - MLT uj240ES blue ray player. I am unable to find any updated firmware update. Current firmware is version 1.10.

  Can someone help me on this

  Hey,.

  If a firmware update is available, you can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  If this isn't the case, you already have the latest version of the firmware.

  In your case, I recommend to test different brands of blu - ray discs. I have good experiences with Verbatim and TDK discs.
  Check this box!

  By the way: I prefer a backup of the data on an external HARD drive. It of safer and easier! ;)

• Gettings error when you try to burn a DVD or CD

  I am running vista and I downloaded the drivers for the driver but everytime I try to burn I get errors, nobody knows?

  Try to remove the CD filters in the registry:

  http://support.Microsoft.com/default.aspx?ID=314060

• Error c00d11c9 CD burner

  Hi, I have problems burning my cd error c00d11c9 appears. My drivers seemed to day and I cleaned my registy. I can extract the music but unable to burn CDs. I upgraded windows 2000 to windows desktop Desktop 3000 and wonder if there is a conflict with that or is it something else? I have an acer 5315 vista basic laptiop. I would be grateful for any help. Thanks :)

  Hello

  Did you try to use different disks and check what's happening?

  Step 1: You can try to change the burning of CD or DVD setting and check.
  Reference: http://windows.microsoft.com/en-US/windows-vista/Change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Step 2: Check if the problem persists in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Also, please take a look at the below articles.
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• DVD burn error, "burn failed".

  I record in windows media center and fire shows them on a dvd.  I've never had a problem until yesterday.

  I am trying to burn the dvd, but get the answer, "burn failed" an error occurred while burning cd/DVD.

  I tried the store several times and he always tells me that the problem is resolved, but it is not.  I also have

  downloaded updates and restarted the computer without success.  Help!

  Hi, Helen,.

  Access Event Viewer Windows and search for messages that coincide with the approximate time that you tried to burn the DVD.  After return of the impossible event ID and message

  During this time, see if the Gokul T solution helps

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-DVD-Maker-burn-failure/535d32d8-86d1-4F99-a4a3-9b61b32f1bd9

  Or, Naman R solution.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/Vista-Media-Center-will-not-burn-DVD-of-any/5a03f051-FAB4-4FB2-a90f-ba5e45d3601d

• 10-FC06-0002 - HARD drive recovery disc error load XP and Windows 7 very well

  OK, so I have a Toshiba laptop I want to restore because I had used it for school and he had a lot of things about what I didn't need and turned slowly. Rather than take things one by one, I thought it would be better to start from scratch. I jumped in the recovery discs, I created, restarted the computer and booted from the DVD. I have chosen all the settings to restore the computer to out-of-the-box settings and a time window that says «copy files please wait...» "After that the screen disappeared after 10 minutes or so, another window flashes on the screen for a split second (has not yet the chance to see what it was) and then an error window pops up error 10-FC06-0002. The only thing I can do is shut down my computer, and it does not start after that. After trying several times, I decided to come here.

  I know what you say. "Before coming here, search or something, there are tons of problems like that here." Well, I'm looking, and all the results told me to "make a copy of your drive and see if it works, if not its your HARD drive ' tried to make an exact copy of the disk using a tool to copy DVD of Google, no dice. I tried copy the files from the disc on the desktop on disk, did not work. Copied files on an old thumb drive and booted from it. The same problem. Make one. ISO disk image and it has burned, triggered the error as well. No matter how I try to run the restore files, the same error message prevails. This would point to the hard drive being broken, correct? This is where I get lost, Windows XP installs flawlessly and works faster that any other computer I used it, as well as Windows 7 beta does.

  -------

  Does anyone know a fix to this error so I can restore my computer? Should I order new disks of recovery at Toshiba? How much do cost?

  -------

  I created these recovery disks about a week after the computer is turned on for the first time. The only software on the subject was the preloaded software, Mozilla Firefox, and MSN Messenger. These two programs would have caused corrupted recovery discs to bring?

  THANKS FOR ANY HELP IN ADVANCE! : D

  -----------

  EDIT: Should probably tell you some info on the laptop. It is a Toshiba A200 - AH6, try to restore Windows Vista recovery disks created in the Toshiba Recovery Manager.

  Hello!

  To me it sounds like it's your Toshiba Recovery disk is noisy or something else. It seems that the disc can't be read properly.
  I doubt that s a hardware issue because you tried a XP and Windows 7 disk successfully.
  But as Akuma says that this can happen also due a poor quality DVD media.

  In any case, I think you need to order a new drive Toshiba Recovery directly.

  Finally and above all the software that you have installed (Firefox and MSN) didn t cause corrupted recovery disk. Theoretically, you can install what you want before you create the recovery disk. The recovery disk creator burning a disc bootable with the files in the folder HDDrecovery on the second partition. All programs that you have installed must be installed after recovery again.

  Good bye

• Unable to save the movie in Live Moviemaker - many error codes

  I have tried repeatedly to record a movie in Live Moviemaker.  Last night I tried to save the movie using "recommend the parameter" error 0 x 87160129 appeared.  The location of the source has not been moved or renamed.  When I checked through the 23 images were affected, with different error codes - 0xC946001E, 0 x 80070057, 80004003 0 x, 0 x 87160129.  When I tried to save this morning using "burn dvd" setting, error 0 x 80070057 appeared, only 12 frames of the film have been affected and only image was the same as the previous night, but with a different error than before.  When I previews savings B4 film everything seems ok, I tried to save at least 5 times, but noted only error codes / affected executives in the last 2 times. But it seems that concerned executives continue to change.  Would appreciate any help.  Thank you very much

  I have tried repeatedly to record a movie in Live Moviemaker.  Last night I tried to save the movie using "recommend the parameter" error 0 x 87160129 appeared.  The location of the source has not been moved or renamed.  When I checked through the 23 images were affected, with different error codes - 0xC946001E, 0 x 80070057, 80004003 0 x, 0 x 87160129.  When I tried to save this morning using "burn dvd" setting, error 0 x 80070057 appeared, only 12 frames of the film have been affected and only image was the same as the previous night, but with a different error than before.  When I previews savings B4 film everything seems ok, I tried to save at least 5 times, but noted only error codes / affected executives in the last 2 times. But it seems that concerned executives continue to change.  Would appreciate any help.  Thank you very much

  =============================================
  I'm guessing that you are running Movie Maker 2.1 on Windows XP?

  There is a good possibility that some of your source files (photos.
  video clips, audio clips) are incompatible or corrupted.

  Even if the project plays well in Movie Maker... which is not guaranteed
  It can encode the project in a video file.

  First... try the following...

  When ready to save it as a movie... go to...
  Tools / Options / Compatibility tab and uncheck the box 'all' filters.

  Following... record in DV - AVI format as follows:

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  If the steps above fail, the next task would be to convert
  video clips on the. Before you import into movie WMV format
  Audio Maker and convert to the. WMA format before
  import into Movie Maker.

  There are many converters available on the net... the
  the following link is an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup296.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your music files on the main screen...

  Select "while"WMA"/ OK...

  Drag and drop your video files on the main screen...

  Select "all to WMV" / OK...

  Now try to recreate the project with the converted files.

  If you decide to try these suggestions... Let us know the result.

• problems burning to disc at the library

  I have a problem burning a cd to the library, the drivers say they work but I have no sound and when I try to burn just says: error complete combustion

  There is no noise and it won't play either. the cd plays on other devices, including other computers, my library of music already burned times

  can someone help me please?

  Hi gillsharp,

  Thanks for posting your query in Microsoft Community.

  I understand that you are unable to burn the disc at the library, when you try to burn, it says error complete combustion, and there is no sound.

  1. what applications do you use?

  2. you burn a music library on a CD with Windows Media Player?

  3. What is the accurate and complete error message?

  4. What is the brand and model of the computer?

  Please follow the steps mentioned in the links below

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Method 3:

  Please run the fixit from Microsoft mentioned in the link below.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Also check out the links below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Try to burn a mix cd but does not burn. Help, please

  I tried to burn songs to a cd and I know there is enough space for all of them but then whenever I have burn, he ends up 30% to 78% finished and says it can not burn the cd any longer and the CD do not work in any cd player or my own computer now I wonder why it won't let me burn.  The error report always says that the burner is busy, even if it burns only one of the disks.  What should I do?

  I tried to burn songs to a cd and I know there is enough space for all of them but then whenever I have burn, he ends up 30% to 78% finished and says it can not burn the cd any longer and the CD do not work in any cd player or my own computer now I wonder why it won't let me burn.  The error report always says that the burner is busy, even if it burns only one of the disks.  What should I do?

  =======================================
  It is possible that you may have hardware problems with
  the burner, but first of all, I think I'll try a different software.

  The following freeware can burn an Audio CD (music)
  or a data CD which could be MP3s, if your drive is
  compatible with MP3s.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  DeepBurner Free
  http://www.DeepBurner.com/index.php?r=download
  (Windows XP/Vista/7)

  The following links may be worth a visit:

  How to burn CD/DVD with Deep Burner
  http://www.ehow.com/how_4494548_burn-CDDVD-deep-burner.html

  Deep Burner free - create a Real Audio file Audio MP3 CD
  http://www.YouTube.com/watch?v=CqpjCQNHdVs

• Transcoding in first 10 items error

  Dear Adobe,

  After spending hours finding the right solutions to my problem, I decided to contact you and ask for help.

  I was keep navigate on the adobe forums how to solve "transcoding error" when I try to burn my project to dvd.

  I think I've tried everything, but the problem is still not resolved...

  So I have finished editing the videos, I have put them together in a single file, saved in 1920 x 1080 p (h.264) .mp4. Initially, they were shooting with my digital SLR. I imported the file titles in first 10, .mp4 and menu items then burned blu - ray project without having any problems. Then I was going to burn the project again in dvd, but ended up burning in "transcoding error". I use the templates of the element first, everything is inside the borders, nothing marked in red. I checked the forums, I turned off automatic Analyzer, but nothing happened. Then I tried different settings, has not yet. Then I started to export a short part of the video in a different format (*.mpg, .m2v) just to try if one of them works very well, is not yet. I checked the edits, but after their installation, nothing has changed.

  I have Win7 on my laptop with Core i3, 6 GB RAM processor, ~ 200 GB of free space.

  Could you please help me find a solution to this problem, please?

  Thank you very much!

  Robert

  Robert

  Have you tried

  1. Uninstall QuickTime and first Elements 10 the usual way of Control Panel.

  2. make a ccleaner free running through (regular and register cleaner parts) CCleaner - cleaning and optimization of the PC - Free Download

  3. reinstall QuickTime (latest version) and then first Elements 10 with antivirus and firewall disabled.

  RTA