Burning DVDs for playback with a DVD on a TV

Similar Questions

• Should you cuda for playback with 4 k on Macbook pro end of 2013?

  My question is, I have a macbook pro (late 2013) i7, 16 G of ram, nvidia Gforce 750 m with 2 GB of memory ddr5, mavericks osx 10.9.1

  Is this reading machine 4 k with only the software? or he must have active cuda?

  Because I did several tests first with RED 4 k files and even with a resolution of 1/4 I always drop frames. Then I tested with Arri Alexa 2 RAW files k and first just may have a reading decent regardless of resolution 1/2 gal and droped frames, 1/4, this is a no go because there a lot of pixels can't really see it happening.

  Another test was 4 k IOS Canon 1 d files. These files are still similar to the arri those, I do not have a reading no matter the resolution! These files, I can't even play on VLC they lag everywhere.

  I handled the files on the flash drive SSD internal 700MB read/write, and then in a lacie us3, same problem. On the first with the software alone and cuda, same thing.

  (I already posted on a diferent discussion, im having droped frames with cuda on simple H264 files enable, then maybe for 4 k is possible, but only when the cuda option works perfectly)

  If its a problem with my computer, or you guys think its first Adobe CC?

  Thank you

  
  

  CUDA does not at all help with reading.  It helps with effects, graduation, blend modes and other.

  For this kind of media, you should really focus on a proper workstation with five internal drives:

  System

  Projects

  Cache / Scratch

  Media

  Exports

  And you might want to consider making this Media Player a RAID 3, which means a minimum of seven internal disks.

• Amplification of Type K Thermocouple for playback with USB 6008 at high temperature

  I'm looking to amplify a K type thermocouple, so that the signal can be read with a bit of precision by a USB-6008. I watched the AD595 chip, but it indicates a maximum useful temperature of 100 ° C and I'll need to read up to 700 C.

  Is there another amplifier chip that would work up to this temperature, or should I resign me to use the unamplified signal and get a very inaccurate (~ 30/division) the temperature reading?

  The AD595 has a range of-200 C to 1250 C, here is the data sheet:

  http://www.MNE.PSU.edu/Sommer/me445/AD595.PDF

  -AK2DM

• Windows Live Movie Maker-how burning the project to DVD for playback on TV

  How can I take a project in Windows Live Movie Maker and burn it and then play on my DVD player to my TV?

  How can I take a project in Windows Live Movie Maker and burn it and then play on my DVD player to my TV?

  ================================
  Have you tried Windows DVD Maker?

  Windows Live Movie Maker - save the movie to your hard drive
  http://www.brighthub.com/multimedia/video/articles/14270.aspx

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  Windows 7 - change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-us/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  Create DVDs using DVD Maker in Windows 7 home
  http://www.online-tech-tips.com/Windows-7/Windows-7-DVD-Maker-tutorial/

  Windows 7 - How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Burn DVDs with Imac 2015...

  Hello Forum,

  I just updated my Imac 2011 and bought a newer Imac 2015 and I forgot it doesn't have a DVD/CD player.  Question I'm looking for recommendations on what to buy to be able to burn DVDs, play, DVD and CD.  I have customers who still use the DVD and need to burn and create menus that I am probably able to do with DVD Studio Pro?

  Thank you!

  -Tony

  Apple sells an external USB optical drive specifically for use with models that do not come with an optical drive. You will find in the store.

• Burned DVD - Equium A60 playback

  Hi guys, I was wondering if someone can help me. I have an Equium A60-692 with a Pioneer DVR-K13A CD-ROM drive. The current problem I have is that whenever I insert a DVD that was previously burned, not only by my pc, but others that the CD-ROM drive is unable to read. DVD, that I created in the past that worked very well also stopped play. All I get is the orange led flashing first and then rest it perminently on resulting in a failure in the dvd playback. The player plays original DVD movie very well and plays also any form of cd. Do you think the reader is endangered or is there a setting that has been changed? Any help on this would be greatly apreciated.

  Best regards Richard

  Hello

  It's not easy to say why it of not possible to read the burning DVD.
  You log out of engraving? Sometimes the medium cannot be read because the sessions of burning are not closed. But this is only possible if you burn CD/DVD several times.
  The second possibility could me not supported way. You must use different media.
  However try to remove you drive the Device Manager and reboot the device. The operating system should recognize the drive again. Well maybe this procedure will solve this problem.

• Problems burning DVD with my Satellite L350D disc - 20 d

  Hello

  I have problems with burning DVDs on my dvd recorder in computer laptop satellite L350D-20 d

  > Drive 1 - Info: TSSTcorp CDDVDW TS - L633A TO03 (f) (ATA)

  I'm trying to update my firmware from here:
  http://www.x-drivers.com/catalog/bios_firmware/optical_drives/companies/Samsung/models/TS-L633A/index.html

  But even the TO03 version does not...
  I only see message saying drive Cant find Suisable or Drive not suported ect ect...

  I've been try loking for simple drvier but it looks like there is not no lol

  Hello

  Don't you know that the use of the incorrect firmware or not is not compatible would be detrimental to your CD/DVD drive?
  You should only use the firmware provided by Toshiba.

  I checked the page European driver of Toshiba and found 6 different firmware updates.
  There are updates for the reader:
  TS-L633P, TS-L633A DVRTD08A, DVRTD08L, TS-L632P TS-L632H

  You got the message because it seems that you used the wrong firmware or is not compatible!

  So if you want to Flash the firmware using the Toshiba files European page:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  by the way: some disc can cause some problems if different test types of disks from different manufacturers.

• External good DVD burner need for Satellite A30-203

  Can someone suggest a good external dvd burner for my A30-203
  I think I need to copy the videos of the laptop I think that their storage on the laptop uses a lot of memory.

  Can someone recommend / help please.

  Hello Ken

  It will be interesting to know what is your priority. Do you want ultra-thin DVD burner and take it with you or you want to copy all that at home.

  I ask this question because I used the old Satellite 1900 with external DVD writer. My old Satellite has USB 1.0 only and I bought the optical disc player placed in the external case and hooked up with my Satellite via the firewire port. I was very satisfied and data transfer was excellent. I must also say that desktop DVD burners can run with faster burning speed.

  Your laptop has USB 2.0 ports, and you can use the USB connectivity for external device. If you want to use at home I recommend you to use something like this. I had the same manufacturer. It works perfectly.

• Best blu - Ray reader/DVD burner drive for the 5 K 27 "iMac retina?

  Recommendations for best blu - Ray Burner DVD reader/writer that works best with the 5K 27 "iMac retina calculate.

  It is not 'better', but there are choices that meet your needs. Contact www.macsales.com (OWC), they sell many OS x ready Blu Ray players, one or more will fit your needs. Talk to someone, they can help steer you in the right direction.

• Satellite A100-011 with Vista: DVD-ram UJ-850 s can not burn DVDs dual layer

  Hello

  cannot find answers to my problem, so start a new topic.
  Having Satellite A100-011 with Vista preinstalled and Mat * a DVD - RAM UJ-850 s (firmware 1.10).

  Recently installed Nero 7.5.9 and you want to burn DVD (6, 5 GB) media dual layer (Immation - Ritek).

  First time Nero stopped with information: could not perform start of Disc At Once (without damaging the media).
  After that, run Nero as Windows XP - SP2 program and burn half the disc (first layer), but when to start to burn the second layer (I guess), stop once again with the same error information (could not perform start of DAO).

  Simple disc burning layer without problem.

  Anyone any idea how to solve this problem?
  Thank you
  Luci

  Hello

  tried to record double-layer of a different brand? Maybe you should try it, because sometimes certain brands are not really taken in charge or not very well. And check the toshiba (or google) pilot site for new drivers or firmware for this drive, sometimes that it really helps.

  I think that the media are not really compatible, I ve read some similar problems in the roxio forum and they solved by using another brand.

  Would be nice if you give some information on this case... :)

  Welcome them

• XP does not support burning DVDs or need for resettlement?

  The combo CD-RW/DVD-ROM drive in my work more former Windows computer has failed. I replaced it with a DVD +/-RW recovered on a newer computer broken. The computer came with Windows 98SE (I said it was my most old), but I had it installed the player that can only play DVD's before the upgrade to XP.

  I thought the Hardware Wizard to detect the new drive looked like XP it can now burn DVDs, but everything concerning the integrated burning guard speaks "copy to CD" or "burn CD" and encouraging me to "insert a blank CD.

  Not XP SP3 doesn't support data DVD burning using built-in tools, or should I reinstall or repair XP to recognize that the only CD burner has been replaced by a DVD burner? It would be easier to find just a 3rd party free tools. I didn't break anything to use as I got a burner that has been integrated into another computer (breath capacitors on the motherboard) burner who gave to a recycling center after having been stripped of useful things like a hard drive replacement, and a 56K modem/fax on a map. (the modem may not be useful nowadays, but fax is).

  I'm afraid that "native" DVD burning was introduced not to Windows until Vista. XP does not support native DVD burning. However, you can use 3rd party burning software. Most "retail" burn the material will be delivered with a CD offering a 'lite version' of such software, for example Nero.

  There are also freebies autour. Many on this forum recommend imgburn

  http://www.ImgBurn.com/

  (I have no experience of this product on which to base a personal recommendation)

• I can't burn DVD with movie maker window

  I use windows vista, and until very recently, I had no problem with windows movie maker.  But during the past year, whenever I try to burn a dvd, it burns at about 40 percent or more and then all of a sudden, it will say 'cannot complete the dvd, 'unknown error'.  Are there any suggestions as to why this might be happening?

  Hello whalelover,.

  You can try the problems Troubleshooting Microsoft listed here for problems with burning CD/DVDs .
  There is an automatic FIXIT who will scan your computer and fix problems that he sees.

  If this does not help, it may be a problem of encoding and you don't have the correct Codec to hole in Movie Maker.

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Please answer back with an update.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.

• Cannot burn DVD-R with my Satellite P100-342

  I bought a Satellite P100-342 two years ago. Some time after I tried to burn DVD + R and it was impossible, so I sent it to Toshiba. A few weeks later, when they returned to my laptop I saw that I can burn DVD + R, but it was not possible to burn a DVD-R.

  I tried with many manufacturers of DVD - R, but no one works.

  I checked my DVD multi recorder (HL-DT-ST-DVD RAM GMA-408N) with Nero Info Tools and it checks ON items: DVD + R and DVD-R. It shows that system ASPI are not installed and I don't know if that's the problem.

  My OS is Windows MCE.

  Will you help me, please?

  Hello!

  This DVD did you tested on your laptop?

  I use discs Verbatim always and never had any problems with it. You may also try verbatim and post workout.

  Good bye