Bus PCI 5, device 9, function 3

Similar Questions

• HP Envy 17-3077NR - bus PCI 10, device 0, function 0 (Code 28)

  Greetings!

  Hey, I have a HP Envy 17-3077NR, installed a cost of Windows 7, I'm sure that I installed all drivers 64-bit HP drivers page, yet "PCI Device" is always on view under "Other devices" with yellow exclamation point. I checked the properties and it says ' bus PCI 10, device 0, function 0 (Code 28). Nothing helps, I have re-installed Realtek Card Reader, Ethernet and Bluetooth. Please help as I am setting up this device for someone else and you want to do things.

  Thanks in advance!

  Hello

  You are welcome

  The hardware id is for the Realtek card reader driver, so I suggest to try to reinstall it from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56908.exe

  Once completed, restart the laptop.

  When windows has reloaded, check device manager again.

  Best regards

  DP - K

• HP COMPAQ 6200 PRO SFF PC: Bus PCI 0, device 31, function 3 DRIVER

  I HAVE A PC HP COMPAQ 6200 PRO SMALL FORM FACTOR I KEEP GETTING MESSAGE ' CAN FIND DRIVER FOR CONTROLLER of BUS SM THE DRIVER IS: PCI bus 0, device 31, function 3 WHERE CAN GET THIS DRIVER? Thank you

  Hello:

  Download, unzip and run the file setup.exe from the link below... then reboot the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• Bus PCI 5, device 0, function 0

  network controller its lack

  Hello Joe,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur if the network driver is missing or not installed.

  I suggest you update to the computer manufacturer's Web site network driver and check the issue.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite M70-131: BUS PCI 6 - DEVICE FUNCTION 4-4, driver required

  Hi all
  I have a Toshiba Satellite M70 - 131 (model No. PSM70E - 01500RAR, Serial No. 16185917 K)
  I use windows XP Professional.
  I could not install the driver of a fo the below mentioned PCI device that is listed as follows

  "PCI DEVICE BUS 6 - FUNCTION 4-4.

  In Device manager a question mark '? ' to come up with a description "PCI DEVICE".

  I have already installed the Modem, Lan Wireless, its display and IEEE1394

  So please help me to solve this problem. I need the answer for the following queries

  (1) this PCI card uses to which device?
  (2) how can I know the exact driver software
  (3) why the name of the device (for example: modem,) does not appear
  (4) how do I know which device need me to install

  your immediate support is very appreciated

  Concerning
  PETER

  Hello Peter

  I don't really know what you are missing, but the fact is that on the Toshiba download page you can find the document Instructions of facilities. All you need to do is install all the things listed here and in the exact order. After having done that, everything should work well.

  I M70 - 159 and using the same document I installed Windows XP Home edition successfully.

  BTW: I'm not sure at 100%, but maybe you lack driver for 5 in 1 card reader (driver cardbus).

• Unknown devices (PCI bus 9, device 9, function 2, function 3)

  HP Pavilion dv6699ed

  After a clean install of Windows 7 Ultimate 32 and drivers/software updated for the quick launch buttons and fingerprintdevice, I still 2 unknown devices:

  Bus PCI 9, device 9, function 2

  Bus PCI 9, device 9, function 3

  For both devices, it shows that the drivers are not installed.

  Can you help me by saying what are the devices and drivers, I need to install?

  Thanks in advance.

  Frans

  Message edited by cowkof on 01/12/2009 09:29
  Message edited by cowkof on 01/12/2009 09:58

  Install the HP Vista card reader driver for your model to solve the problem with the Base system device:

  Ricoh 5 - 1 card reader driver here

  When there's some sort of problems with installing and then try to run in Vista compatibility mode.

  Resources:

  How to run a program in Compatibility Mode in Windows 7

  Make older programs in this version of Windows

• PCI bus 0, device 2, function 1

  Hello

  I have a problem with my video controller device driver after installing windows 7 (from windows xp)
  
  information about the location: PCI bus 0, device 2, function 1
  
  Hardware ID: PCI\VEN_8086 & DEV_2792 & SUBSYS_3081103C & REV_03
  
  Full name: other devices / unknown device
  
  My laptop is: Hewlett Packard Pavillion dv 4000 (Ek919EA #ABH)
  
  Properties: The drivers for this device are not installed. (Code 28)
  The installation failed because a function driver was not specified for this device instance.
  Please help me to find and download
  Thank you

  Hello:

  Download and run this file.  You will probably get an error not supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp34501-35000/sp34749.exe

  Conclusion of any windows error.

  Go to Device Manager and click on the device video controller requiring driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34749.

  Make sure that the include subfolders is selected and the driver should install.

  Then, restart and graphics need to be working very well.

  Not that Windows Aero is not supported on this model graphics card.

• Update driver for the location of the controller bus PCI 5 network, device 0, function 0 code 28

  location PCI bus 5, device 0, function 0 code 28

  Hello Mark135,

  Thank you for your message.  Go to the Web site of the manufacturer of your computer and download/install the latest network driver for your computer operating system.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function.

  I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function. I posted a link to the image below.

  Nevermind, I deleted the image by accident. Oops.

  https://SkyDrive.live.com/redir?RESID=D50158D65A52CBBA! 1928 & authkey =! AKdLQ4hGMOynvnc

  If the manufacturer of the motherboard doesn't provide drivers specific win7 there is none.

  If there is the bit Vista drivers ' appropriate ness, what they would usually work

• missing driver, other pci bridge device, compaq presario

  model SR5030NX. OS = Vista Home Basic.mising driver for any other pci bridge device.

  When I bootup error message appears, I tried to find pilot with search without success. I don't know what is the pci bridge device, (it might be all that is in the pci slot)? I did not open the case again. I heard in the Device Manager under other pci bridge device properties on the general tab.

  TYPE A.DEVICE: OTHER DEVICES

  B.Manufactuer: UNKNOWN

  C.Location: The bus PCI 2, function 0

  Device status

  This device is not configured correctly

  There is no driver selected for the item or a set of device information. (Reinstall driver does not help.

  The tab Dnder driver

  A.Driver provider: UNKNOWN

  BRIVER DATE NOT AVAILABLE

  C: VERSION OF THE DRIVER NOT AVAILABLE

  NOT DIGITALLY SIGNED DIGITAL SIGNER

  THE TAB DETAILS, DEVICE PHYSICS OBJECT NAME

  \DEVICE\NTPNP_PCI10014

  Everything that was happening at startup this error message appear?  This type of error usually occurs after a reload of the OS or the addition of new hardware.  If none of these things were done, then probably a hardware failure.  There is a modem installed according to the specification page: http://support.hp.com/us-en/document/c00874655

  If that is not used, then try to delete it.  Maybe just lucky enough that's the problem.  Most of the other elements are integrated on the motherboard

• No noise at all but 'device is functioning properly.

  Just today, my computer has lost all sound and I have no idea why. I'm good with computers and can almost always fix things myself but right now it's pretty much my last option. I have no idea why I have this loss because the device is recognized, the drivers are up-to-date, it says that the device is functioning, and audio playback problems resolution did not. The only time that windows recognizes the problem, it's when I go to test the reading and it says: "error!" Couldn't play tone! »

  I can't use the resolution of other issues because he thinks that I have xp and wont let me run it.

  The pictures below should give a better idea of what is wrong.

  http://a.imageshack.us/img189/5711/81740133.jpg

  http://a.imageshack.us/img822/1215/12799201.jpg

  ANY help is greatly appreciated.

  Hello
   
   
  1. have you made changes on the computer recently?
  
  Method 1.
  a. run a Microsoft program that automatically diagnose and repair problems with sound and audio on your Windows Vista-based computer.
  To do this, click on this link and follow the instructions:
  No sound in Windows
  http://support.Microsoft.com/GP/NO_SOUND
   
  b. you can also check the methods of additional troubleshooting for any of the problems of its in the article below.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  
  Method 2.
  You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
  I would also recommend to check if there are Windows updates for this device.
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• loss of connection; My pci wireless device disconnects after rest. How can I stop this from happening

  My pci wireless device disconnects after rest. How can I stop this from happening

  If it's a laptop, clear the check box of - connect to save the battery in the Wireless Control Panel.

• Z820: Z820 Windows 10 question - pci bus 0, device 22, function 3

  HI guys! Try to set up a fast enough for 4 k machine NLE here, began with a refurb Z820. Managed to get 10 Windows running without much of a fight. One last question, that I can't understand and I watched and read until my eyes covered in blood with no posotive result.

  In - other devices - Pci Serial Port Device Manager.  I have a Pci bus 0, device 22, only function 3 no error driver installed. As far as I know I installed all the drivers, updates, etc., etc... at least two times.

  As everyone on this forum has more experience with HP workstations then I thought that I would return it to the wiser.

  Thank you for your help.

  o.k. now.

  Retrace my steps, always a good thing when lost and confused, I realized that when I installed the Intel sp744499.exe management software, I didn't follow directive and that run the extract program of it is installed destination! Down & here when end of step B as written in the release notes, you no longer have to fix the latter on issues. Lesson learned - read all the instructions you can find, including the release notes.

  Thanks again to Paul who tried to save my sight.

• Driver missing "device Base System (Pci Bus 8, device 6, function 2) ' for window 7.

  Help, please.

  Hello

  You need the driver for your Ricoh card reader - if you need a direct link to this can you post back with the complete model number and Nr of the laptop (from under your laptop service tag)-see here for an explanation.

  Kind regards

  DP - K

• Satellite A100-926: unknown device bus pci7; device: 6; function: 3

  Hello world

  I have an A100-926, device management, it shows me that there is an unknown pci device on the bus 7. function 3, but there is no way to know what is it and how can I install it because if I Reinstall driver it don't think the right on the toshiba tool cd.

  I don't know if it is related to that but in an application, the button Delete must pushed me for longer than a second to work :-(
  Is there anyone who can help me?

  Thank you

  You reinstall the operating system on your laptop?

  Generally, the laptop is delivered to the image of Toshiba and there should be some unknown devices in Device Manager

  In the forum guys have put the link to the very useful document from Toshiba.
  It describes how to identify the unknown devices.
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Maybe this will help you to know which unit it is.
  Then, you can download the right driver from the Toshiba page