No noise at all but 'device is functioning properly.

Similar Questions

• Pavilion 23-q055na: hp not pavilion no noise at all, but no error detected by the operating system

  I installed Windows 10 on a brand new Pavilion - HP 23 - Q055NA and now no sound at all.

  Troubleshooting Windows Audio will return no error, the device drivers for each of the sound systems say they are up-to-date and 'works '.

  Device-> Manager

  The inputs and outputs audio

  Speakers (Realtek High Definition) Audio Driver Date 07/09/2015 Version 10.0.10240.16384

  Audio, video, and game controllers

  -CyverLink WebCam

  -Intel (RR) Audio display: 24/10/2014 Version 6.16.0.3160 driver Date

  -Realtek High Definition Audio: Driver Date10/08/2015 6.0.1.7580 Version

  The latest windows updates were installed: there was a problem with one, a reboot loop, but after power off the computer, which has disappeared, the computer has been updated and restarted again.

  I ran the update from the HP support and had some 6.0.1.7584 for Realtek Audio driver that fixed my problem

• I have no sound on my PC (with the exception of BEEEEEEEPS!). I checked under the hardware profile and all audio devices work but when I go in the sound settings it says there is no device installed.

  I have a HP Pavillion PC that I am running Windows XP Home Edition with Service Pack 2 on it.

  In the device section in the Control Panel, it says that all audio devices are working properly.  I even went to Microsoft Help on each one and there is no solution.

  When I go to Sound Devices, once again in the Control Panel, I see a message on each tab indicating that no device is installed.

  Other noise problem, I have no other problems.

  Help, please!

  Hello Sonier,

  Thank you for your message.  Do you know what type of sound card you have?
  Click 'Start' > right click on 'My computer' > click 'manage '.
  Click on Device Manager.
  In the right pane, click the (+) sign next to sound, video...
  Underneath, you should see your sound card.
  With this information you can go to the manufacturer website and download/install the latest driver for your card.
  Please let us know if this information was or was not useful for getting your problem be resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• no noise at all, don't test sounds work but not its system

  I've lived all systems - they say that everything works perfectly, but still no sound. Some systems include test noises which all work perfectly, but still no sound. It can be something simple, but I can't solve, HELP

  Hi James Graham,.

  1 you get the windows default sound when you log in the system?

  2. when the problem started?

  3. you remember to make changes to the computer before this problem?

  You can check out the following link and try to run the troubleshooter and check:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  You can try to set the audio device by default and check:

  a. Click Start, open Control Panel

  b. in the classic view, go to his

  c. click the Read tab.

  d. to make speakers, highlight it and click the set as default or right-click on the device and select are lacking.

  Hope this information is useful.

• Hi, does anyone know how to get my sony vaio bluetooth works please, I tried to update etc, but he won't find not all bluetooth devices.

  Hi, does anyone know how to get my sony vaio bluetooth works please, I tried to update etc, but he won't find not all bluetooth devices.

  Hello

  Check with the support of Sony as their problems, driver updates, other reasons could known BlueTooth
  is not functional or taken in charge.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  =====================================

  If bluetooth is supported on your model that these could help.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• All iOS Devices "allow access" but will be out of sync

  Hello

  I have a 2 Air iPad & iPhone 6s, using iTunes on Windows 10.

  I always sync my devices by USB. I have not synchronized each device in a few weeks. The two iOS devices running iOS 9.3.1.

  For some reason any when I plug in a device, under Windows it warns me that 'Apple iPad' (or iPhone) is plugged in (not his name), and then on my iPad/iPhone, it asks if I want to "allow access". Neither the source device list appears in iTunes and therefore cannot sync my devices.

  I have synced with this installation of iTunes on this computer many times before, so I'm not sure why this is happening now.
  I have deleted my iTunes twice lockdown folder and restarting computer & all my devices.

  Can anyone suggest a solution?

  Thank you!

  Ash

  Problem solved. The following steps are taken:

  Reinstalled the drivers:

  Plug in Device iOS

  Open Manager devices (search in the start menu)

  Portable devices - right click on the Apple iPhone and choose Update driver software.

  Go to C:\Program Files\Common Apple Mobile Device Support and choose the Drivers folder. Click OK.

  Click next to reinstall the driver pack.

  Synchronize now works as usual.

  Hope this helps anyone who is going to search for.

• All network devices can see each other + Windows 7 computer, but machine Windows 7 can not see them

  Hello. Under the network of my machine Windows 8 folder, I can see all the devices on the network. This includes a printer, my computer Windows 7 (what I can access), an Apple TV (from special software), a wireless hard drive, the router and a digital recorder.

  The Windows 7 machine, I can only see the router and the printer. On special software, the Apple TV does not either. When you perform the Windows 8 computer host as a server for the special software, the Windows 7 machine could not see it on the special software. This means that there is something wrong on the Windows 7 this machine is not allowing him to detect other devices.

  In a game of LAN, Windows 7 and Windows 8 computers can't see each other.

  All devices are on the internet and I am posting this from the Windows 7 machine right now.

  Windows 7 and Windows 8 machine are on the same network.

  No device is on a host group and the group home service is disabled.

  Peer networking is enabled.

  Network discovery is turned on.

  Both connections are set to private/Home.

  Originally, the Windows 7 machine has been on his own home group and could be seen by anything. After a few hours, I finally got out of the home group, how other devices could see him then. However, he cannot always see other devices.

  How can I get the Windows 7 machine to see other devices? I am at a loss. Is there a service that I have disabled right now that needs to be enabled? I don't know what to do.

  Hello

  Please contact Microsoft Community.

  Disable the security software and check.

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Also check out the link below and check if that helps.

  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/is-is/Windows7/why-can-t-I-see-other-computers-on-my-network

  If the problem persists, or you have questions about Windows, let know us, we will be happy to help you.

• Upgrade to Windows 7 and would like to know if all my tablet/pen functions still work?

  Original title: Windows7 and Tablet PC

  I have a Gateway Tablet PC.  He who is like a laptop, not these new without a keyboard.  For some reason, she has two model numbers: TA1.0 and M280E.  At the moment it has Windows XP (gateway) Tablet PC edition 2005 Version 2002 Service Pack 3 on it.  It has a processor Intel Pentium M 1.73GHz, 1,999 GB of RAM or processor if you look in the BIOS, 2048 MB of RAM.  I think it's the RAM Max will take this particular PC.  The processor is scalable?  I know that I have contributed to a maximum of one of my doors from the other monitor has collapsed on me one day and is unusable, so I think this is one.  The ugly manual, I downloaded did not about the Max RAM, a Fujitsu 37.2 GB HD and a CD - RW Optiarc.

  Because Windows XP is longer supported, no. updates (although I find it odd that a pop-up saying updates are ready for your computer is fun) and for some reason it will run is more than some previous programs I ran over it, such as MSE and Windows Media Player 11, and I don't know I'll find others.

  The important question is: I want to upgrade to Windows 7 and would like to know if all my tablet/pen functions still work, since it's the main reason I want to use?  And of course running WinXP is a safety hazard as well.

  I use my ASUS X54C now and you want to reset to factory settings and reformat the HD, so I want a computer to use while I'm this, as well as using his pen to create a clip art image and also many other things.  Is there anything else I should know?

  The first thing to do is to check the support web site of the gateway to see if there are drivers for devices on Windows 7 for your model. If there is no record of specific device in Windows 7 listed then you will not be able to run Windows 7 correctly, or it may not work at all.

  Gateway driver support web site: http://us.gateway.com/gw/en/US/content/drivers-downloads

  Note: There is an "Auto Detect" option that can help you determine the right model you have.

  M280 using as a guide I tried to see what is available and found only XP / Vista and Windows 2000 drivers, so you may be out of luck, but try to auto detect and see if you have Windows 7 drivers listed.

  J W Stuart: http://www.pagestart.com

• Windows recognizes not all new devices...

  When I plug in a new device to my computer it not to be recognized, but the devices that have been recognized before work normally.

  Once I plug the new device, a message indicates that windows could not find the device driver appears immediately.when I open the Device Manager, that they appear as unrecognized devices. The same features are functioning normally to another laptop.

  of course, I tried to change the USB hub and restarted windows and then I ran a full system scan, then turned off the firewall and antivirus that I also ran that the laptop in safe mode, but the issue is not resolved.

  I have another problem, but don't know if it is related to this problem is that new updates are not installed, so when I restart the computer, it tries to install downloads happening to 30% then stops and comes back.

  Hello

  
  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I view a list of all my devices in sync

  I can successfully add and remove devices from my sync account, but there seems to be no option to view a list of all my devices synced.

  Unfortunately, there is no 'standard' method to do, more than a workaround solution. If you synchronize tabs, you can enter Subject: sync-tabs in the address bar or the button Firefox-> history-> tabs from other devices. I just tested with the new Firefox sync in Aurora and impossible to find a more practical method either.

• All drag and drop functionality stopped working in Firefox 16 / Firefox 16.0.2

  Note that when it stopped working exactly but all drag and drop functionality work more... images, URLS, tabs... you name it. I was on 16 FF and upgraded to 16.0.2 without help. SafeMode... same behavior. Disable each add-on single and plugin... same thing again. using the default theme.

  What's left to try?

  I am running Windows XP SP3.

  A complete remission to zero of the system got things working again for me. Not ideal, but I'll take it for now.

• How can I get all my devices on the same page?

  I have 2 computers, a 6plus of iPhone and iPad old.

  They are all linked to the same account. The office often does not get used, but the laptop, phone and iPad get used every day.

  My favorite feature is the ability to scroll in iBooks. So, I try to use it for all my books, PDF files, etc.. But for the life of me I can not all sync them upward.

  The shelves are different, recent books are different, the pages they open up to are different. It starts to become very frustrating. I have sync collection and bookmarks on all my devices. So what can I do?

  If you run 9.3, things can be out of sync because it seems to be a problem (or questions) with 9.3 and 9.3.1 and iBooks iOS. Sync does not work for many people.

  But if you are using older versions, so I would say that, while the pages they open to should be the same, and the rays should be the same, the list of recent books (all books) syncs between devices. I think it shows just what is recently accessed on the device (I think). In addition, the books on the shelves will differ if one of the books was added manually - all manually added ePub should be added by hand for each device; EPUB synchronize between devices, if they are not the iBookstore. And shelves sort in order from one device to another, even if they have the same books on them (unless you are sorting by titles, authors or maybe categories - I think that those who would get the relatives).

  That's based on my own inveterate iBooks for recent years. Bookmarks, notes, highlights, the location of the page - those should all sync without problem, but (except in 9.3.x, at the moment).

• Satellite C660 - 2K 1 detects all SATA devices

  When I start my laptop, it does detect all sata devices. Hovever, if I boot from USB Memory Stick with ubuntu and leave it for a while, I hear the voice of Crackle and DVD player starts to work. If I then reboot and wait longer, HARD drive starts to work at some point.

  While under Windows, I watched a video and noticed that 3.5 mm jack has not worked. Then, after about 30 minutes, my phone froze and I got BSOD saying 'paging of kernel data error. And when it restarts, it asked me to type the HARD drive password. My HARD drive has no password! Well, after that reboot, there worked, did not ask the hard drive passwords. But it's very weird, and from the portable computer is very annoying. I tried another disc HARD, same problem. I also reconnected RAM and HARD drive.

  Model laptop is C660 - 2K 1.

  Hello

  I fear the strange behavior cell phone might be the result of a serious malfunction of equipment m.
  Usually the KERNEL_DATA_INPAGE_ERROR STOP error code: average 0x0000007A requesting data from the paging file (swap file is used by Windows to store temporary data) could not be read into memory.

  From my point of view of the few there are something wrong with the memory or HARD drive, or both.

  I think you should check the two pieces of equipment.
  In case this does not help, the motherboard should be checked in too. But of course the motherboard is one of the expensive parts for laptop and I think you should think twice before this fix.

• How can I have my network monitoring airport to see all connected devices?

  I would like to change the preferences of my Fritz! 1750th Repeater. I'll pass the LEDs of the question, but I can't access the device as http://fritz.repeater.

  Thank you for helping me!

  Sorry, we can not help you on a Fritz! Question of Repeater, but if you want an answer to your question of... How can I have my network monitoring airport to see all connected devices? ........

  On your MacBook Pro...

  Open Finder > Applications > utilities > AirPort Utility

  Hold down the option key on your Mac when you double-click on the image of your AirPort Base Station (we assume that you do not have an AirPort Base Station)

  A summary sheet opens to show all Wireless Clients that are currently connected to your network.