Button alignment problem - it should inherit I think

Similar Questions

• Weird alignment problem

  I think it might have something to do with my work on a small document - 48 * 48 icon - but maybe not.

  I have some strange alignment problems. I have an arrow head, I try to line up on a tree, and no matter what I do, they refuse to align the death. The alignment buttons don't work, dragging manually won't work - it falls right on 1px on each side where I want.

  Any ideas what's happening? I have no guides that would have an impact on it.

  Make sure you have not align on the pixel grid is activated in the transformation Panel.

  Although, if you prepare the content that will eventually be pixel based, leave this setting on ensures things seem to be crunchy in pixels.

• Button navigation/problem

  Help! I'm at my wits end.

  I take an introductory class in Flash and working on a project for this class. Everything was going well until I started working on my navigation. I used the flat tube green buttons common library on the homepage and all the rest of the site used a dark color button I duplicated and colored from the Green flat tube button.

  My problem:

  I have an actionscript layer that should work throughout the entire timeline but is not. Originally, I had a keyframe for the frame that contained the green buttons and the other which stretched the length of the entire timeline, containing all the code for the buttons. I put scrapped that and tried to combine code with what was to the keyframe of the work who controlled the green buttons on the homepage. I had used snippets of code first, but also tried to remove all that and just do it by hand, but that doesn't seem to make a difference.

  I don't know what the problem is: the ActionScript? The buttons? Some random glitch? I would tend to think that it's something weird, I do with the script, but I wrote it how it seems to work on pages that work properly. And I do not think that it is just dark buttons because I also tried to do a button 'next' a clipart image, who also works hard.

  Any ideas? Suggestions? The assignment should soon and I am at a loss what to try next. I will be happy to clarify anything if something is confusing the way I said.

  ((Oh, également: après avoir regardé un peu sur le forum, mon sonne un peu comme celui-ci: http://forums.adobe.com/message/3113656#3113656 ))

  Not exactly the same, but the buttons have a similar problem. When I first noticed this problem, I have hade three keyframes with actionscript, 1 which apply to the first image, the second applied to the second and the third image was script that applied to buttons for the rest of the document. With this in mind...

  OK my site on order on the timeline goes on and on: homepage, homepage (w / the green buttons), on (dark buttons) page, history page (dark buttons), etc. The buttons work on the on the page - I go to click on the green button on the home page, go to the about page and the home page (via the black button) no problem. If I say history page and try to get back to the homepage (via the black button) it will not work. If I'm going to the page of the homepage first, then go to the history, I could go back to the home page. It's really weird!

  I have now grouped the second and third frame of actionscript and not even a navigation of the on the page works, but I thought that the thing which I explained above looked like the problem of the other person so I wanted to mention.))

  Thank you!! I pasted the code of the button below. The last two buttons are those that do not work and the rest of the script applies to keys that are functioning normally.

  import flash.events.MouseEvent;

  Stop();

  about_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrameThree);

  function fl_ClickToGoToAndStopAtFrameThree(event:MouseEvent):void

  {

  gotoAndStop (3);

  }

  / * Click to supervise and stop

  By clicking on the instance for the specified symbol moves the playback cursor to the frame specified in the timeline panel and stop the movie.

  Can be used in the main timeline, or on timelines of film clip.

  Directions for use:

  1. replace the number 5 in the code below with the image number you want the playback head to when the user clicks the symbol instance.

  */

  history_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrameFour);

  function fl_ClickToGoToAndStopAtFrameFour(event:MouseEvent):void

  {

  gotoAndStop (4);

  }

  / * Click to supervise and stop

  By clicking on the instance for the specified symbol moves the playback cursor to the frame specified in the timeline panel and stop the movie.

  Can be used in the main timeline, or on timelines of film clip.

  Directions for use:

  1. replace the number 5 in the code below with the image number you want the playback head to when the user clicks the symbol instance.

  */

  basics_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrameSix);

  function fl_ClickToGoToAndStopAtFrameSix(event:MouseEvent):void

  {

  gotoAndStop (5);

  }

  / * Click to supervise and stop

  By clicking on the instance for the specified symbol moves the playback cursor to the frame specified in the timeline panel and stop the movie.

  Can be used in the main timeline, or on timelines of film clip.

  Directions for use:

  1. replace the number 5 in the code below with the image number you want the playback head to when the user clicks the symbol instance.

  */

  shoes_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrameSeven);

  function fl_ClickToGoToAndStopAtFrameSeven(event:MouseEvent):void

  {

  gotoAndStop (6);

  }

  / * Click to supervise and stop

  By clicking on the instance for the specified symbol moves the playback cursor to the frame specified in the timeline panel and stop the movie.

  Can be used in the main timeline, or on timelines of film clip.

  Directions for use:

  1. replace the number 5 in the code below with the image number you want the playback head to when the user clicks the symbol instance.

  */

  benefits_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrameEight);

  function fl_ClickToGoToAndStopAtFrameEight(event:MouseEvent):void

  {

  gotoAndStop (7);

  }

  / * Click to supervise and stop

  By clicking on the instance for the specified symbol moves the playback cursor to the frame specified in the timeline panel and stop the movie.

  Can be used in the main timeline, or on timelines of film clip.

  Directions for use:

  1. replace the number 5 in the code below with the image number you want the playback head to when the user clicks the symbol instance.

  */

  pictures_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrameNine);

  function fl_ClickToGoToAndStopAtFrameNine(event:MouseEvent):void

  {

  gotoAndStop (8);

  }

  / * Click to supervise and stop

  By clicking on the instance for the specified symbol moves the playback cursor to the frame specified in the timeline panel and stop the movie.

  Can be used in the main timeline, or on timelines of film clip.

  Directions for use:

  1. replace the number 5 in the code below with the image number you want the playback head to when the user clicks the symbol instance.

  */

  resources_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrameTen);

  function fl_ClickToGoToAndStopAtFrameTen(event:MouseEvent):void

  {

  gotoAndStop (9);

  }

  homeDark_btn.addEventListener (MouseEvent.CLICK, ClickAndPlay_One);

  function ClickAndPlay_One(event:MouseEvent):void

  {

  gotoAndStop (2);

  }

  celtic_btn.addEventListener (MouseEvent.CLICK, JumpAndPlay_One);

  function JumpAndPlay_One(event:MouseEvent):void

  {

  gotoAndStop (75)

  }

  You mentioned have code on different frameworks and how the framework and the back worked, but the story goes about page you could not go back.  Looks like your code was on the subject of chassis you skipped by going directly to the plot of the story.  If you ignored this framework you skipped assigning listeners to the buttons.

  An alternative approach to consider is to have all of your buttons from 1 chassis and control their visibility rather than assigning the code so that they work when you move around chronology

• How can I get my guides to align the work plan using my align palette? Whenever I hit the button Align, the guide turns completely off the drawing surface.

  I'm not crazy, he used to work. I could use the palette line up to put my guides centered, right-aligned, left-aligned, etc. I started having this problem in CS5 when I hit the button Align and the guide would go completely out of the drawing surface. I thought it was just a bug and would leave with upgrade to CC. But I'm getting the same problem! So boring.

  It's an old bug that sting when you line up with the palette alignment guides while using an extract of the limits is selected.

  You can disable it in the General preferences or in the drop of the alignment pallet.

• I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  Is attached a screenshot of my screen with the context menu to show/hide tabs. I want to delete some of them and let others. Please help me to know how. Thank you!

  Hmm, maybe this "one-time" imported into the new preference? Try this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cust and make a pause so that the list is filtered

  (3) double-click the preference of browser.uiCustomization.state and the content must be highlighted in a small dialog box.

  (4) copy the whole line and paste it into Notepad and save it as a backup.

  (5) in Firefox, click on the button '3-bar' menu > developer > Notepad. Remove the comment that appears and paste data preferably, that must appear on a long line. Click on the "Pretty Print" button to make it more readable.

  So I hope that you can spot the extra toolbars and change them out, taking care to preserve the commas between the elements.

  I don't have the extra toolbars in mine, but I copied and pasted back this spaced format and Firefox was able to handle it well. I went into customize and moved a button, and when I left, Firefox has rewritten the preference set as a single line. Assuming that yours works fine, then you can get rid of the backup from step (4).

• Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?

  Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
  If I need to can replace it where I get an older version?
  Thank you

  Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

  The latest support for your operating system version is 3.6.26 , you are fully updated.

  For more information, see:

  Firefox 3.6 system requirements

  Firefox 10 system requirements

  [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]

  http://www.floodgap.com/software/tenfourfox/

  http://tenfourfox.blogspot.com/

  https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Speedepro says I have 536 problems. Should I allow to repair?

  I was told that a line on tune up can cause problems. Should I allow in

  or I can fix it myself. I have no problem operating I can say.

  Hello

  Absolutely not. Too much hype of the system optimizers and registry cleaners will cause problems while setting
  little or nothing. Considered to be snake oil. Uninstall it and be happy, that he went. These 536 questions
  probably not really exist.

  If you have problems, real problems, ask in the Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  One day computers will be self-healing however we are far from this time.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• alignment problem

  Hi, I have an alignment problem with my program. I use two verticalfieldmanager in a horizontalfieldmanager to display two columns. The problem is, according to the Simulator tha I use, the text seems aligned or not. In 9000, there is no problem, because the width of the screen is great. But if I use the 8110, which has a narrower screen, this problem occurs. How can I solve this problem for all simulators? Thank you. My code:

  SerializableAttribute public class DetallesOfertaScreen extends form {}
        
  GestNearController controller;
  Horizontal CustomHorizontalManager;
  VerticalFieldManager campos;
  VerticalFieldManager labels;
  RoundRectVerticalManager contGlobal;
  RoundRectContainer contProyecto;
        
        
        
  public DetallesOfertaScreen (GestNearController controller) {}
            
  This.Controller = controller;

  Cabecera
  setTitle ("Datos cabecera");

  If (Controller.getOfertaActual ()! = null) {}
                
  Campos = new VerticalFieldManager();
  labels = new VerticalFieldManager();
  horizontal = new CustomHorizontalManager();
  contGlobal = new RoundRectVerticalManager();
  contProyecto = new RoundRectContainer();
            
  TAM int = Controller.gettamanoscreen ();
  Fuente1 of police;
  Fuente2 of police;
                
  If {(tam > 320)
  fuente1 = Util.getNewFont (21, Font.BOLD);
  fuente2 = Util.getNewFont (21, Font.PLAIN);
  labels.setFont (fuente1);
  campos.setFont (fuente2);
  }
  ElseIf (tam<>
  fuente1 = Util.getNewFont (15, Font.BOLD);
  fuente2 = Util.getNewFont (15, Font.PLAIN);
  labels.setFont (fuente1);
  campos.setFont (fuente2);
  }
  else {}
  fuente1 = Util.getNewFont (19, Font.BOLD);
  fuente2 = Util.getNewFont (19, Font.PLAIN);
  labels.setFont (fuente1);
  campos.setFont (fuente2);
  }
                
  LabelField labelArea = new LabelField("Área:");
  LabelField labelLinea = new LabelField("Línea:");
  LabelField labelVO = new LabelField("VO:");
  LabelField labelTitulo = new LabelField("Título:");
  LabelField labelCliente = new LabelField("Cliente:");
  LabelField labelFechaOfer = new LabelField ("date offer :");
  LabelField labelFechaCom = new LabelField ("date beginning :");
  LabelField labelFechaPrev = new LabelField ("date Aprobacion :");
  LabelField labelJProy = new LabelField ("Jefe proyecto :"); ")
  LabelField labelMeses = new LabelField("Meses:");
  LabelField labelProbabilidad = new LabelField("Probabilidad:");
  LabelField labelHorasPrev = new LabelField ("Horas Previstas :");
  LabelField labelRevision = new LabelField("Revisión:");
  LabelField labelSector = new LabelField("Sector:");
            
  Offer OfertaDTO = controller.getOfertaActual ();
            
  String FechaCom = oferta.getFechaComienzo ();
  String months = oferta.getMesesNum ();
  String HorasPrev = oferta.getHorasPrev ();
  String revision = oferta.getRevision ();
  VO string = oferta.getVO ();
  String date = oferta.getFechaCreacion ();
  String title = oferta.getTitulo ();
  String client = oferta.getCliente ();
  Sector of strings = oferta.getSector ();
  String line = oferta.getLinea ();
  String domain = oferta.getArea ();
  String JefeProyecto = oferta.getJefeProyecto ();
  String FPrevAprob = oferta.getFechaPrevAprob ();
  String probability = oferta.getProbabilidad ();
            
  LabelField input1 = new LabelField (Area);
  LabelField to input2 = new LabelField (Linea);
  Input3 LabelField = new LabelField (VO);
  Input4 LabelField = new LabelField (title);
  LabelField input5 = new LabelField (client);
  LabelField input6 = new LabelField (FechaCom);
  LabelField input7 = new LabelField (FPrevAprob);
  LabelField input8 = new LabelField (date);
  LabelField input9 = new LabelField (JefeProyecto);
  LabelField input10 = new LabelField (months);
  LabelField input11 = new LabelField (probability);
  LabelField input12 = new LabelField (HorasPrev);
  LabelField input13 = new LabelField (Revision);
  LabelField input14 = new LabelField (Sector);
            
  Añadimos a los contenedores
  labels. Add (labelArea);
  labels. Add (labelLinea);
  labels. Add (labelVO);
  labels. Add (labelTitulo);
  labels. Add (labelCliente);
  Para activar el scroll
  labels. Add (new NullField());
  labels. Add (labelFechaOfer);
  labels. Add (labelFechaCom);
  labels. Add (labelFechaPrev);
  labels. Add (labelJProy);
  labels. Add (labelMeses);
  labels. Add (labelProbabilidad);
  labels. Add (labelHorasPrev);
  labels. Add (labelRevision);
  labels. Add (labelSector);
                
  Campos.Add (INPUT1);
  Campos.Add (INPUT2);
  Campos.Add (INPUT3);
  Campos.Add (INPUT4);
  Campos.Add (input5);
  Campos.Add (input8);
  Campos.Add (input6);
  Campos.Add (input7);
  Campos.Add (INPUT9);
  Campos.Add (input10);
  Campos.Add (input11);
  Campos.Add (input12);
  Campos.Add (input13);
  Campos.Add (input14);
                
                
  horizontal. Add-on (labels);
  horizontal. Add (Campos);
            
  contProyecto.add (horizontal);
  contGlobal.add (contProyecto);
  Add (contGlobal);
            
  }
  else {}
  Dialog.Alert ("invalid offer!");
  }
            
  }

  ...

  With 8110:

  

  Thank you!!

• Button formatting problem

  I'm having the button formatting problems in the footer of a muse (A Virtual Colorado fly fishing Field Guide) site and wonder if anyone can give some insight into what goes wrong.

  There are two buttons.  The 'Business' button text is formatted as bold Helvetica 14 points.  The 'Links' button is the same formatting, but has also 10 points 'Space before' in order to center the text in the button.  When I go to the home page of the site, Business button shows the text at the top of the key and the links in the Center as planned.  If I navigate to any another page the text of the button Business has been moved to the Center and the text of links to the bottom of the button and the button links has stretched vertically.

  Why would the buttons have this behavior?

  Just rebuilt the button.  Rather than start with a text box, used the State of the widget library button.  That seems to fix the problem.

• HP D4360 printer - alignment problem?

  My watch of the half cut letters (upper half), Headline is not yet printed on the page, a clear text than the rest of the text,

  white line crosses SOME of the lines of text, page #s top (right) not printed.

  Note: I have a new cartridge it works fine.

  Note: I had a paper jam the other day, out of paper on the other side (did not know that I should open a backdoor to do). But, I

  think I got an OK impression after that happened.  Today, printing problems. Help please!

  It's sunshyn2005 - thank you for your information. In fact, it is not a matter of color.  It was really the alignment.  I received instruction from someone on the spot - to go to start/printers-devices/preferences/services/then click the ALIGNMENT tab, which produced a sheet printed diagnostic, I then completed in the screen.  Had to re - align 3 times to get it perfect, but it worked.

  Thanks for your suggestion, the page that came on the colors and other things I have bookmark for playback if/when other problems arise.

  Thanks for your comments.

  TriciaJoy

• Photosmart 7510 alignment problem

  Hello

  I'm having a problem with my photosmart 7510.

  The screen an error alignment and the alignment and cleaning do not work.

  Is there something else to do? or should I buy a new printer?

  Thank you

  I called HP support 1-800-474-6836 and spent a few hours with their support to the execution of diagnostic tests.

  They recommended a replacement of the printer because basic troubleshooting has not helped.

  We power off of the pritner (power disconnected) and held the power button for 30 seconds.

  power turned back and removed printer cartridges and printerhead. Clean any electronic contact with a cloth and put back them.

  Also replace photo cartridge that was less than 30%.

  The alignment is still not.

• Region alignment problems

  4.2.1

  THM: 2

  Hello world

  I had a question about the "new column" option when setting up of regions horizontally. I created an example here

  1. I am not able to reproduce here, but report 1 and 2 If the application has data with higher values, jumping around, I don't know how to respond, but basically, I tried to fix the width of the two reports as they do not horizontally expand depending on the length of column report. Is this possible?  I tried the following in the attributes of the region - style = ' width: 600px; float: center; Clear: none; "While this works, hardcode the origin of the problem in the second point.

  2. I want to center align the region 15 of html.  However, one thing I noticed is that if I set the width of the report 1 and 2 report of a coded hard and then region html 15 value behaves differently in different resolutions, on 1440, it is centered properly with all the elements in this center aligned, however, on a monitor resolution 1600 or 1910, it is pushed to the right side. When I hit the option to see the grid. I noticed there is another grid or column that is created on a higher resolution screen between report 1 and html region 15. This does not happen on a 1400 resolution screen. So the question is perhaps hardcode.

  Basic idea is to have all the three regions of fixed width such that they expand 'horizontal' and html region 15 is centered with everything centered.

  Thank you!

  ryansun wrote:

  I think that the best cases like you said that the two reports extend horizontally based on the resolution of the screen.

  Yes, I thought that was the easiest approach, and I set up in a new page in your demo application.

  I started by simplifying what was to get rid of everything that touched the spacing or available other than the layout region table. It was to drop or modify models of the region which introduce spacing through CSS margins, borders, or padding.

  Then, I created a region containing relatives and made the report and the regions sub-regions of the present button. All models of the region in theme 2 have CSS padding applied, so to avoid this problem, I added a model of area small to use for the container area (Model No. cannot be used because we need a selectable container for use as the target of CSS.)

  After that, it is simply to use CSS to develop the container and its content to the width full page and align the Center area, horizontally and vertically:

  /*
    All of the tab navigation enabled page templates in this theme include sidebars.
    These are not required here, so suppress them to eliminate unwanted padding
    artifacts from the layout.
  */
  td.tbl-sidebar {
    display: none;
  }
  /*
    Set the width of the parent region...
  */
  #container {
    width: 100%;
  }
  /*
    ...and its region layout to the width of the page, and eliminate table cell spacing
    from the region layout table.
  */
  #container .regionlayout {
    width: 100%;
    border-collapse: collapse;
  }
  /*
    Eliminate table cell padding from the region layout table.
  */
  #container .regionlayout>tbody>tr>td {
    padding: 0;
  }
  /*
    Set the width of the report cells on each side to 45% of the page width.
  */
  #container .regionlayout>tbody>tr>td:first-child,
  #container .regionlayout>tbody>tr>td:last-child  {
    width: 45%;
  }
  /*
    Set the width of the center button region to 10% of the page width.
  */
  #container .regionlayout>tbody>tr>td:nth-child(2)  {
    width: 10%;
  }
  /*
    Horizontally and vertically center the button region within the region layout cell.
  */
  #container .regionlayout>tbody>tr>td:nth-child(2)>table  {
    margin: 0 auto;
    vertical-align: middle;
  }
  /*
    Expand the width of the reports to the width of their container cells.
  */
  #container .regionlayout div[id$="_catch"]>table,
  #container .regionlayout .report-standard {
    width: 100%;
  }
  .report-standard td {
    vertical-align: top;
  }
  

  A number of things may need further work. As the parts of the report are now configured No. Template, no titles are displayed. If the securities are necessary, the best way to display will probably use another custom area template to avoid the fill applied to built-in ones. The white background and content minimum paging at the end of the relationship line affects the Visual Center in the vertical axis, causing the position of the region of middle button seem to be too low. This can be solved by removing the paging if reports don't require it, or style of the paging line to have the same background color as the rest of the report.

• Master page + alignment problem

  Hello

  Basically, I work on my site and I created an A-master page. Then I realized that I wanted to have a different master page because I wanted to MAKE another level to appear with the main master page. I'll do that for 3 subheadings more. It should be clear with the photos that I've provided (the right image is the homepage)

  Anyway. When I click on "Editor" he's going to the B-Master page, but this move a few centimeters down. I have reproduced the A-master page, it should be the same alignment. I had problems with the creation of the site where I had to group them so that it works correctly, so I tried this as a solution, but it did not work.

  Any help is appreciated.

  

  I thought about it. This is because the header at the top was not in the same position to the other. (God knows why it was not, because I have duplicate pages.)

  I think that when I was inserting a YouTube embed player should have played a little with it. I'm not sure.

• Tecra S10 - 10F - Support Button Multimedia problem

  Hello

  I have Toshiba Tecra S10-10th with Win Vista SP2.
  I have problem with Toshiba button Support.
  After a clean install of Vista, everything works fine. Now two buttons next to the button toshiba walk / stop don't work. When I uninstalled 'toshiba value added package', buttons was answered but open "windows Mobility Center.

  When I installed Toshiba value added Pachage once again, the buttons are no longer...

  Could someone help me pls?

  THX

  Hello

  This strange s
  Usually the installation of VAP should help you get the buttons working again.
  Value added package contains tools and utilities that are necessary for the functionality of the multimedia buttons

  Please install the VAP, and then configure the keys still using the utility button Toshiba located in Toshiba Assist-> optimize

  There you have to click on the button, and then you set some for some exe file button.
  Single exe files are in C:\Programs\Toshiba\TBS

  Welcome them

• Boolean text alignment problem

  Hello

  I use "propertyosition:Left" to line up my file names. Unfortunately, file names do not align vertically to the first "Choose file" button, especially when the length of the file names is different. If you press "Esc" in the menu "Select a file" and then "select a file" is pressed in the 'main Menu', file names are aligned now. I don't know why? Any help will be appreciated.

  First, run 'Main Menu' then 'Create a file' and then ' Select a File. " Please create files in the folder "C:\Test". Six files can be displayed.

  Steve

  John wrote:

  Hello

  Have you tried to delete a single file and add another file with different length of the file name? I'm sorry, what is your way on 'text version' on the properties?

  Thank you

  Steve

  Your problem is that you have locked the text and the default justification is out in all your buttons.  Correction is attached.

  (Just try this in "Select a File_Test.vi"):

  1. make all your buttons visible

  2. "text version" (as someone said - just right-click on the text and select "Text Version" - this to all buttons)

  3. Select all text, and set the left justification

  4. make all the invisible buttons

  It's everything he needed...

  -DP