Button changes style when it is connected to the application manager
I connected the standard axButtons for the application handler in a custom IOS built in CSharp using Visual Studio 2008. When I run the OI, the buttons change to standard style (edges rounded, etc.) what looks like a classic style (square edges, no color gradient, etc.). At first I thought this might be a limitation of CSharp, but when I ran the CSharp UI executable (comes with Teststand), the buttons seem correct. Is there a reference that I haven't added or something? I followed (copied about) the code found in the CSharp UI complete, leaving aside the functions that I didn't need.
This is the only true code on both buttons. It's pretty simple, so I imagined what a project property that I have install incorrectly. I have also included the namespaces I've included.
Thanks for any help
using NationalInstruments.TestStand.Interop.API;
using NationalInstruments.TestStand.Interop.UI;
using NationalInstruments.TestStand.Interop.UI.Support;
using NationalInstruments.TestStand.Utility;
Connect sequence controls
this.axSequenceFileViewMgr1.ConnectCommand (this.axEntryPoint1Button, CommandKinds.CommandKind_ExecutionEntryPoints_Set, 0, CommandConnectionOptions.CommandConnection_NoOptions);
this.axSequenceFileViewMgr1.ConnectCommand (this.axEntryPoint2Button, CommandKinds.CommandKind_ExecutionEntryPoints_Set, 1, CommandConnectionOptions.CommandConnection_NoOptions);
Shawn-
No problem. I've attached a zip file that contains the recommended manifest file and the updated project file that references. I didn't create the manifest file, place the file in the directory of the project file, add the manifest file to the project, select the file in the control of the ring on the settings tab application to embed the manifest, rebuild the project and run.
Tags: NI Software
Similar Questions
-
Satellite U500: Volume + button glue IT when it is connected to the power adapter
I have a problem with the touch buttons on my U500. I have already returned the first laptop that I bought for the Exchange.
The question is this:
When the power cord is connected (without worrying if connected to the wall) the "Volume +" button will stick THERE.
The volume will continue to rise, it cannot be muted or turned down as the + keeps repeating.
Without the power cable inserted the works of buttons as expected (normally).I made the new installation of recovery discs - do not set (under Vista)
Then another new installation Win7 upgrade and this new PC is having the same problem.
At first, I thought a hardware fault (the new PC worked fine for awhile).
But now the second PC has the same symptoms I suspect a software/driver problem.I've seen suggestions for similar questions to:
Re-install "Toshiba common Modules" but I can't find it on the support site for U500 in Australia.Any help would be greatly appreciated. Thanks to you all.
What version of BIOS is installed?
Try to update the BIOS.
-
BlackBerry Smartphones stopping incoming emails when it is connected to the Desktop Manager
Hi all
Me, stupidly, recently upgraded to the new v6 of DM when you are prompted to do so. Since then, I was not able to prevent emails coming wireless when my BB is connected on the software. I WANT THAT ABILITY BACK!
OK, I realize I am perhaps odd in not wanting to have to deal with emails twice (Office AND on my BB) but I've been happily using my BB to the untethered email only.
So the question is: How can I stop my BB receive emails when plugged in the DM? (I have not yet tried roll back to the previous version of DM as that shocks a bit my sense of progress.)
Any suggestions out there?
Z
I removed 6.0 DM and re-installed DM5.0 and everything is now working back again as it was.
RIM need to consider seriously any roll outs of the "update" software like what they've done is wet off clients at best a beta version, with fewer features, but hey, the interface looked good!
-
Cannot connect in the application manager
I've migrated my apps for my old Mac Pro to a new. Now when I try to open photoshop, I get a message that the CC App Manager is missing or damaged and I need to reinstall it. I do and nothing happens... the symbol in the menu bar is grey and when I open it in the hope of signing in it is empty. No sign in option. I did it several times. uninstalled CC on the old computer, disabled Adobe programs on the new, rebooted... NOTHING.
Migration of Mac with Time Machine WILL NOT WORK with the Cloud program activations due to hidden files
Sign out of your account... Uninstall... to run vacuuming...
-Restart your computer... Sign in to your account... Reinstall
-using the vacuuming after uninstalling and prior to the relocation is necessary
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-
the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.
I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access
added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?
Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam
Visit this link:
http://support.Microsoft.com/kb/936213 -
Hai, my ipod shuffle when it is connected with the computer, it flashes orange light. If I remove without light and music. Even I kept connected all day with my laptop for charging. But without success. Is it possible to change the battery?
If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
If the problem reoccurs after the restoration, it's probably a battery worn. Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small. Not easy to work on. This web site has repair guides
https://www.iFixit.com/device/iPod_Shuffle
and parts are available from sources like eBay.
Apple 'serve' the shuffle, if it's the 4th gen (current type). Rather than change the battery of your device, you get a replacement unit. According to this document, out-of-warranty fees are $39
Pricing of the Service - The Apple iPod Support
NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.
The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.
-
Sound does not work when it is connected to the TV with HDMI
I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance
Hello gematz,
The sound does not work when it is connected to the TV via HDMI.
Go to start.
Type sound.
Click sound
On the playback tab, click with the right button on the HDMI interface, and then select set as default device.
If you do not see the HDMI, right click and select devices see off, then set as default.
I would like to know how everything goes.
-
Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have. I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)
Hello
Thank you for the update.
This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.
You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.
If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.
Note: be sure to enable the security software on the computer after checking the issue.
Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
-
Satellite Pro C70 - could not get the image when it is connected to the projector
This machine has been purchased for use in the classroom with projector and smart board. When it is connected to a monitor, the second screen works fine, but when it is connected to the projector DLP Epson, the computer screen and the projector are the two laptop PC empty of other manufacturers of work correctly when it is connected to the projector.
Can you help me?
Message has been modified: name of the laptop has been added to title
What laptop do you speak?
.. .and what operating system is preinstalled on this laptop?You use the pre-configured Toshiba system?
Is the resolution of the screen for both devices (display and external monitor) set correctly?
-
I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)? Fact is need to update itunes?
Hi sonalnj,
I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.
According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.
iPhone 6 s Tech Specs
http://www.Apple.com/iPhone-6s/specs/Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.
OS X Lion mountain
http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lionNow the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.
Update of OS X El Capitan
https://support.Apple.com/en-us/HT201475Nice day!
-
gen64.exe Malware when it is connected to the internet
My desire to HP dv6-7206tx with Windows 8.1 has a problem when it is connected to the internet. An application named 'gen64.exe' makes the CPU to run at 100%. And Microsoft Security Essentials doesn't pick it up as a malware. I checked on the internet to confirm that it is a malware. Please help me. I have no idea how he broke into my laptop.
Hello
There are many programs for cleaning system of malware, adware etc which would suggest Members here.
I like this one to detect & fixing malware: https://www.malwarebytes.org/mwb-download/
Update latest version & tick "Scan rootkits" before starting the analysis.
After the scan, quarantine the detected objects. Restart the system. Yet once, open the Malware Bytes program, go to the history tab in there: remove all quarantined items from there
Restart the system.
Open the prompt as administrator, do a SFC SCAN, check if integrity violations are:
http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.htmlConcerning
Visruth
-
Help! Fuze heats up when it is connected to the pc...
Hello
I recently bought a 4g version black Sansa fuse and I got a little nasty gets hot problem-it when it is connected to the pc or the USB power adapter.
I know that some readers mp3 or other devices can become hot during charging, but I really don't think that the above 50 ° c temperature is normal (since its even hotter tham my GPU...). Ive noticed a post on anythingbutipod.com where a guy had a same problem, so I just want to ask a few questions he did: is there the "anyone else having this problem as well? Should I worry about this? »
BTW. My sister uses the same pc (even the same USB port ) to recharge his Creative Zen Stone and it does not seem to warm up. Oh, and the USB power adapter I have has the following specifications output: 5.0V +/-0, 1V and 150mA to 1000mA
Thank you in advance... and sorry for my bad English (if its bad )
It is not normal, please contact technical support for replacement or return it.
-
drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks
Hi keo1,
We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
See check your hard drive for errorsVisit our Microsoft answers feedback Forum and let us know what you think.
-
Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port. Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is. Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7. But the installer does not work.
Windows 7 Professional 32 bit.
Hello Graboots,
Thank you for your message. You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer? You can try using a different cable, for this rule as well. Since it is a question of recognition, we remove the external devices before software troubleshooting. Do you get anything when you plug the printer (ie. a tinkle of connection)? Please let us know, we are looking forward to hear back on your part.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
No internet access when it is connected to the modem
HI I have an Ethernet cable modem BEFMCU10 model v3 connected to a Netgear n100 v2 wireless router. The modem works only when it is connected with the wireless router. When I try to connect Ethernet. Modem to PC, it does not connect, there is no internet access. My ISP is Comcast (Xfinity). It's really weird because how is it possible that theres internet via wireless, but when I connect my modem via Ethernet, I have no internet access
I remember the first time I activated my modem there is xfinity software that did something to my modem but I don't think it has to do with anything he just install something in my laptop. I did a clean install of the software or anything has been removed.
> Sometimes I download things and I prefer to use the physical connection because its faster.
You will get the same benefits and an easier time using a wired connection to your router, rather than the modem.
> My prolem is resolved, I followed your instructions, thank you
You are welcome. Please mark as replied to close the issue.
> is - this quite useful to purchase a Docsis 3.0 modem
You can check this with your cable provider, but probably not. Unless you have a very high speed (usually of company type) cable plan there would be no advantage. You also must be sure that any modem you purchase is compatible.
Maybe you are looking for
-
Try to cancel an article that I bought by the error, but the end of any process it says this: this purchase is not eligible for a refund. How can I cancel or refund this purchase? Thank you!
-
Do windows update always check for driver updates?
I checked for the latest version of windows update this morning, and I can't find driver updates, however when I went to the supplier of my driver, I found that there is an update available for my driver. I don't remember my driver version I was usin
-
Hi, when I buy this laptop, I learned that the ram installed is 1x2GB DDR3 1600 MHz (PC3 12800). But when I want to add a total of 6 GB DDR3 1600 MHz 1x4Go, take the ACER authorized service spell the installed ram is 1x2GB DDR3 1333 MHz (PC3-10600) a
-
Problem: Sent mail is not in the correct folder in Windows Live Mail.
I installed Windows Live Mail on XP this weekend and imported all my mail to outlook 2003. I have two accounts, both using IMAP and both with sent folders. There is also a generic sent folder below, as a catch-all folder and is where to send the elem
-
HP downloads stuck in Panel configuration-HELP!
My HP All - In - One Printer has been dead for over a year now and I have been going without putting my docs on disc and going to my local store print and print in this way. I MISS my printer but have no $ to buy another. PROBLEM is, many programs ar