Button "print" for users

Similar Questions

• Can I add a button print for Thunderbird?

  Is it possible to add an icon of 'button' or printer print at Thunderbird without having to click on the file or more to get to print. By example, if I see an email that I want to print it would be faster if I had a printer icon or button click.

  Your method is perfectly ok.
  Whether you use the "menu bar" - file, editing, display etc.
  'View' > 'Toolbars' > 'customize '.

  that although you and I use it, it is not always enabled by default, so why I gave the other option via the "Mail Toolbar.

  If people see that the "Mail Toolbar" - icon Menu, get Messages, write etc.
  then they use the Menu icon and not locate this info under "View".
  It would be here:
  'Icon menu' > 'Options' > 'toolbars '.

  It would be a lot easier if the developers had used the same generic terms and same logic in where are the toolbar info little matter in the bar under icon Menu or menus.

• How to set the default printer for the user in 11i

  How to set the default printer for the user in 11i, please let me know how to set the new printer to the user, its Linux OS EBS 11i.

  Please see these documents.

  How to install the default printer for a user. [153927.1 ID]
  How to set up a default printer for a user in Oracle Applications [ID 1018856.102]
  How to set a default printer? [1237254.1 ID]
  How to configure the default printer for Applications [ID 184109.1]

  Thank you
  Hussein

• Printed for blackBerry Smartphones user guide

  Someone at - it offers a manual printed for the 8330?

  Hello

  Here is a link to the .pdf file. He found with a search of Google "8330 manual."

  http://NA.BlackBerry.com/eng/deliverables/1202/userguide_bb8330_cdma.PDF

  Please let us know if you have any other questions.

  If this isn't the case, please set the thread by using the options on the star of the Kudo.

  Thank you!

• Why not working button print in Google Chrome for WebHelp created with RoboHelp 11?

  You use RoboHelp 11 (11.02.240), I created a WebHelp project that contains a button print in the toolbar.

  When you run the help of Google Chrome (Version 36.0.1985.143 m), the print dialog box does not appear.

  In Firefox and IE, everything works fine.

  Running locally or on a web server? It will not work locally as the "print" key tries to print only the heading and Chrome that blocks because it is considered as dangerous seen locally.

  Kind regards

  Willam

• Order a different number of prints for each image

  If there is a way to order prints of different images different number?

  Say I want to order a print of all my images in a collection of 4 x 6, simple enough.

  Then, I want to order some of them also in format 8 x 10, also quite simple.

  But what I can't find out how to order say;  3 copies of the #4 8 x 10 image, 2 copies of the #5 8 x 10 image and 10 copies of the image #14 in 8 x 10.

  Something I m missing?

  Any help is appreciated.

  Thanks in advance.

  • The options button lets you change the number of prints for each selected photo.
  • The 'add pictures and change print sizes' button allows you to add additional formats and you can even select different amounts for each size.

  See this help page: https://help.apple.com/photos/mac/1.0/?lang=en#/pht6e15ea68

  

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• Workaround for users Mac OSX 10.9.4 that can not scan

  Recently, I upgraded my Mac Mini with OSX 10.9.4 and were unable to scan using the Scan button on the printer all-in-one Deskjet 4400 (I've updated all my Apple software). I accidentally found that if I go to System Preferences and click on printers and Scanners, I can click Scan then open Scanner and can scan from there.

  It is not the easiest way to analyze, but at least I am able to scan. Hope HP will soon find a way that it will work only with the Scan button on the printer.

  Hello

  Full features software is not available for your printer for OS X Mavericks, I regret to inform you that such an is only available for newer models and won't be available for your printer.

  Scan from the front panel only is not supported on the operating system, but only through Capture of Image, preview or Printers Scanners & in the following document:

  http://support.HP.com/us-en/document/c03967506

  Kind regards

  Shlomi

• Photosmart B110 suddenly stopped printing (Mac user)

  Photosmart B110 stopped printing (mac users)

  My printer, which worked very well last week suddenly stopped working. It is not configured for the wireless, but is connected by cable to my Mac (OS 10.6.8). The printer is turned on, the computer attempts to send that message printer is put on the queue. Then it disconnects. But befoee does, it does not print the last piece (5 lines), text file, then a line of gibberishg.

  I went through the page, deleted in case of problem, printer drivers according to the instructions but then realized I couldn't add them back again. The Mac can't "see" the printer with the USB cable. And there seems to be no way to add them to the "add a printer". It is empty.

  So now, I can't even all print.

  Would appreaciate any help I can get. Thank you.

  Hello

  Try to restart the Mac and printer and check any change.

  So make sure that the most recent driver is installed by clickign the icon Apple, then software update.

  If this does not help solve the problem try to reset the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select print & fax.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now go to Applications > Hewlett-Packard > utility device, follow the HP installation wizard and try to print again.

  Please let me know if this is useful,

  Shlomi

• HP Officejet x 64 all in one gives me an alert "printer needs user intervention.

  How can I fix the alert "printer needs user intervention?

  I just checked on my Windows 10 system and instructions for Windows 7 has worked.

  An easier (rather than manually navigate the services menu) way would be to download and run printing HP and doctor Scan at http://www.hp.com/go/tools.  It can automatically find and fix common problems.

• Unable to print from the second printer shared user account.

  I have a new computer laptop windows 7, connected via a WiFi router to host the desktop in Vista and an HP photosmart printer.  The laptop is set up for two users and all the options of sharing files & printers, including auto detects, etc...  The admisistrator can print via the wireless network, but the second user cannot.  When troubleshooting and attepmting to find and add a printer for the second user, the error message 0 x 00000002 displayed after it says that it cannot find the printer.

  Check out these 3 sites, they should be able to give you all the information you need to solve your error message 0 x 00000002.

  http://www.zolved.com/Synapse/view_content/22774/Error_code___0x00000002_Windows_could_not_load_device_compat

  http://pcsupport.about.com/od/findbyerrormessage/a/stop0x00000002.htm

  http://www.windowsxpregistrycleaner.com/Windows-Vista-error-code-0x00000002.html

  I hope this helps!

  Brett M.
  Windows outreach team

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• Set security on 'Decline' for users of Windows/object, cannot access a drive C and d. 'Access denied'-[[problem solved]]

  last updated *.

  Problem is SOLVED. Read my response at the bottom of this thread.

  * Update *.

  Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."

  Hello world.

  I need help. I have windows 8, 64 bit computer laptop.  This system has 3 active accounts now. Account_One that is my administrator account. I have another

  "limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.

  Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.

  While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of

  for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.

  When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.

  One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!

  Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner."  Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.

  So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.

  Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.

  Help, please.

  Thank you very much.

  Thank you very much.

  Problem is SOLVED!

  After three days of effort I was finally able to fix this mess.  It took me three days after going through many similar positions as mine but no final answer or fix, so I kept

  through the 'access denied' messages on this community and won an idea on what

  had happened and what needed to be done. What I found that there are several hundred people

  like me, who have faced this problem and there is no final official help file to explain how to fix

  He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty

  the problem!

  in any case, here's how I solved my problem for people who need to fix it in case it happens to you.

  How the problem began; Read my original post above on top. In short, I set the security setting to refuse to

  Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!

  How I fixed it.

  Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.

  Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."

  Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8.

  Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.

  For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.

  in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.

  Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.

  So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99.  ;-)

• Disable the first/previous/next/last buttons when the user clicks on the button "create".

  Hello

  I have a requirement to disable the first/previous/next/last buttons when the user clicks on the button "create". The must be enabled after the user clicks on the submit, and then the button "validate".

  Is this possible please?

  Thank you.

  Hello

  Using BC4J in the model layer? If so, you might use an EL to the property of disabled button. Something like

  Replace in the binding attribute on your page (preferably the primary key of your form attribute).

  Arun-

  Edit: Check out this blog for more information on this EL: https://blogs.oracle.com/adf/entry/highlighting_new_rows_in_adf

• How to add the button print on Webhelp in Robohelp 10?

  Can someone please provide instructions to add the button print on Webhelp. I am currently using Robohelp 10. I've seen some suggestions using javascript in the skin, but there isn't a step by step procedure.

  I've been seraching for it for several days. It would be a great help for me. Thank you!

  See point 3 to http://www.grainge.org/pages/snippets/snippets.htm#webhelp

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge