By clicking on a layer of processing, etc.

Similar Questions

• My task manager only to see the task and not, application, process, etc. How can I get it back to normal?

  My task manager only to see the task and not, application, process, etc. How can I get it back to normal?

  If it does not display all the tabs, double-click the external border of the Task Manager.

• Layers down when you click the box 3d, motion blur, etc.

  I looked for an answer to this question, but couldn't find anything, so...

  Since the upgrade 2015.3, any time I click to enable or disable an option in the boxes for things like 3d, motion blur, lock the layer, interpolation, as well as other simple actions, rather than just by turning the option or not, the whole layer falls showing transformation, effects and audio data.  This happened with another version, but Adobe hastened to repair so it does not lead me to the point of madness.  This time, however, they seem to ignore, or don't care and are just ranking as "in order to help with the flow of work" which he KILLS my workflow, it helps any...

  My question is, does anyone know how to solve this problem, or if Adobe is working on a fix?  Today is the day, he pushed me over the top when I have a comp with 40 + layers and I need to activate or deactivate the motion blur that I saw... I hate Apple Motion, but if there is no solution, and before I go ballistic eager to break through the wall of After Effects, it's my option if no one can help me.

  Please help.  I hate interruptions in workflow.

  Thank you!

  Dan

  Thanks for your help, but I'm not sure that we are talking about the same issue.

  It seems to be the same problem. your layers have audio when clearly, they do not need to have the audio. Text, shapes and the whirlpool down problem. read Tim Kurkoski answer in the link I gave you:Re: new in After Effects 13.8.1 - with audio shape layers!

  The bug occurs when you work in a model that has been composed before and this model contains a layer with audio, when you add a new layer to this model (any type of layer except the cameras or lights), if this layer should not have audio it will win the audio properties in any case. When you click on a layer switch (for example, solo, lock, a blur of movement, etc.). these layers with superfluous Audio properties will automatically be twirl open their properties.

  See the workaround suggested and if it's a big problem for you, as I have written before - work in 2015.2 until it is fixed

• With previous versions, I could press control (mac) and click on a layer, and he would choose this graph, what form it was. Then I could go to image-culture and reframe the entire file down to that size. Now, this feature is missing. What is the new way t

  With previous versions, I could press control (mac) and click on a layer, and he would choose this graph, what form it was. Then I could go to image-culture and reframe the entire file down to that size. Now, this feature is missing. What is the new way to do this?

  This is the command key, not the control key for a Mac that you use on the layer.

  Gene

• I can't use my keyboard unless I click on tool palette on my second monitor. I'm under 10.10.4 CS6. Basically - once I click the mouse in brush, stamp, etc., I can't cancel, fast replacement of tools, change the size of the brush etc. unless I click on th

  I can't use my keyboard unless I click on tool palette on my second monitor. I'm under 10.10.4 CS6. Basically - once I click the mouse in brush, stamp, etc., I can't cancel, fast replacement of tools, change the size of the brush etc. unless I click on the tool palette. Had this problem for months. Don't know what to do. Going to lose my mind.

  Have you installed the WhiteWindowWorkaround plugin to work around known issues in Mac OS?

• Change in behavior of the option-click on the layer Photoshop CC - layers now flatten/disappear

  I used the option click on layers all the time to perform various tasks. Now, in Photoshop 2014.2.2 CC I can no longer option + click on a layer to copy a layer effect or apply a clipping mask. Instead, as soon as I click on a layer with the option engaged, key all layers disappear / flatten in a "background layer".

  What has changed? And how can I now copy effects from one layer to another layer? The documentation says 'drag to the destination layer', but this simply moves the effect from one layer to another, does not copy it. Dragging allows you to copy an effect, but now, any use of the option key flattens all the layers together.

  Ehh, that shouldn't happen. I just used this feature in Photoshop CC 2014 and it worked fine. Maybe you should try a reset preference: Hold Cmd + Opt + shift as you start Photoshop start. Select 'Yes' when asked if you want to continue with reset.

  Benjamin

• I can't click on a layer for editing mask. CS6 OS10.10

  I worked on a file, and all of a sudden I can't click on a layer mask to be able to modify this mask. I'm still able to do the following:

  • Create a new adjustment layer. When I do cela a new mask is trained for this layer and automatically selected for editing. I can modify this mask. As soon as I click out of it that I can't come back.
  • I am able to shift + click and command-click on the layer masks and get these options/selections.
  • I can't drag a mask existing to a new adjustment layer.
  • Hide/show the mask collection
  • Almost everything, but click ON the mask and selected for editing.

  I tried the following:

  • Close and reopen the file.
  • Restart photoshop.
  • Restarting my computer.
  • Delete/recreate the preference files.

  Any ideas out there?

  I discovered my problem trying to paint on everything I was selected on. He forecast the mask overlay. I thought about it and realized that I must have hit the key 'Q' and put me in quick mask mode.

  So now, it's here in case someone else makes this error! :-)

• Problem of setting a value for the hidden item click on the button with processes action or pl/sql dynamic

  Apex 4.1

  Oracle 11g

  I have a page which consists of a main and several sub-regions area.  I have a pl/sql process in after the header SET_DISPLAY(:P400_DISPLAY:='MAIN';))

  Three subregions have a contional show where P400_DISPLAY = STORE.  It works in the hiding of the sub regions.

  Now, I want to change the value P400_DISPLAY to the STORE to show the subregions when I hit a button.

  I tried to create a dynamic action for the click on the Add button, but get the following error:

  The selected button uses a model of 'button' that does not contain the #BUTTON_ID substitution string #.

  I went to the models and found:

  Substitution strings

  Substitution strings are used in sub models to reference the value of the components. This report details use of string substitution for this model.

  Substitution string	Referenced	De	Description
  #LINK #.	Yes	Model	To be used in an attribute "href".
  #JAVASCRIPT #.	NO.		To be used in an "onclick" attribute
  #LABEL #.	Yes	Model	Button label
  #BUTTON_ATTRIBUTES #.	NO.		The attributes button
  #BUTTON_ID #.	NO.		ID generated button will be ID either the static button if defined, or if not will be a generated ID internally in the format 'B ' | [Internal ID of the button.

  I then tried to create a page process, pl/sql,: P400_DISPLAY: = 'STORE '; If the button is pressed.  The action of the button is submit page. However, it does not change the value of P400_DISPLAY and the subregions are hidden.

  Suggestions please on how to fix the template or change the value of P400_DISPLAY?

  The question of the root, it's that, even if you change the value of the element of your page, it is not visible to other areas of the page until it is in the session. Thus, any other action based on the value of the element of your page. the visibility of a control, a report based on the value of the item, etc. will be affected by changing the value of the item page until it has been changed in the session. Even after that, items are stored in the session, then you must do something to influence the revalued value. To see the effect of this, observe that your page will load and assesses the value of the element of your page, it sees which is the "MAIN" and mask areas. However, he didn't reassess after that.

  Then; your choices for this value set at the session are send the page, or use JavaScript to set the value in the session. If you use the latter, you will have to do extra work to make visibility tests be re - run, so, let's stick with the submit method.

  What you did above sounds correct to do this but, there are a lot of decisions, that you might have done that may have caused things to do not occur in the correct order.

  First of all, we will confirm that what I describe above is your problem. From the development environment, load the page, click on the button to change the value and submit. Now, click on the link marked the Session. He is always at HAND? If the answer is "Yes"; That's your problem.

  Let's start with your calculation after the header. You set it to * only * run if the current value of the element of your page is null? If this isn't the case, it's your problem.

  Load the Page-> Item set to 'Hand' by calculation-> click on the button--> Item set to STORE-> Submit-> Page Load-> point by calculating the value 'hand '.

  See the problem?

  Assuming that's not the question, you have created a branch to the same page, right? What is your process for the branch point? Is it * after * Validation, computation etc.? Because if not, you are not changing the value before that didn't get to submit.

  I bet that's the first question, but take a look at these.

  See you soon,.

  -Joe

• Anchors of click-to - another layer?

  Hey!  I don't know if there is a way to activate this option, otherwise I think it would be great to impliment in a future update of the AE.

  It would be fantastic if there is a way to anchor a layer, click on the spot as much as some effects allow to click to place centers/transmitters/etc. Be a facilitator, this would help things a lot faster that by dragging the sliders X and Y until everything is just as it should be!

  ... Is there a way for this turn, or can I request this feature for Christmas? Thank you!

  Pan behind is there for that.

  Mylenium

• The Task Manager by clicking Open a list a processes and services in the lower right corner, said. I want to finish the tasks.

  When I hit CTRL + ALT + DELETE and select open the Task Manager to end a task, it will open a lot deals and said services in the lower right. I do not understand how to use it to end task does not. There is no end now and I need to close iTunes quite often because it freezes.

  When I hit CTRL + ALT + DELETE and select open the Task Manager to end a task, it will open a lot deals and said services in the lower right. I do not understand how to use it to end task does not. There is no end now and I need to close iTunes quite often because it freezes.

  I do not have itunes, so I don't know where you can find it from Windows Task Manager.
  Click on process tab > scroll to find (if you know its name), until it clicks > click on end process down to the right.

  Alternatively, here is another way...
  Click on Services tab > click Services at the bottom right > uac prompt > now scroll to find itunes. I don't know how it's called. No doubt itunes.exe > if you find it, click on it > looks to the left, click on stop.

  t-4-2

• A button that clicks on any layer even with filters on top?

  Hey guys. IM new to ActionScript. The button click works, but the current project I have is colored by overylays on top. Apparently the AS code only works if it is not all the layers on the top so far.

  Is there a way to tell him the code on top or any layer?

  I'm using this code BTW.

  
  Stop();

  instanceName.addEventListener (MouseEvent.CLICK, functionName);

  function functionName(event:MouseEvent):void

  {

  Play();

  }

  What are collections? Is they are png or sprites with shapes in them you should be able to simply set mouseEnabled to false on them, and the underlying button should work.

  overlay.mouseEnabled = false;

  Also look at mouseChildren.

• Can I move all the objects again selected layer without clicking hundreds of layer bars?

  I'm working on a complex illustrator file generated by GIS software. He gave me all kinds of groups of clip & road clip - what I really need, it's just to put all the same coloured polygons on the layer of a high level (unfortunately I can't draw all of my polygons in a group because illustrator doesn't pull these objects out of their existing clipping groups, and the card gets screwed completely upward if I release the clipping masks. With simple cards I have no problem Direct by selecting all of the polygons, I want, selecting their layers in the layers panel, then moving them to a new layer. This card is too complex, because there are hundreds of objects and hundreds of corresponding layers (they are not contiguous, or else I could simply click can be done with it).

  
  

  I used select > same > fill type to select all the polygons, I want that on a single layer, but I really hope that I don't have to select all the layers for each item one by one before I can move them to a new higher level layer. Does anyone know if there is a way to moving all the objects in a new layer selected without having to actually click all the layers in the Panel? Completely open to the alternative routes to my desired result!

  
  

  Thank you very much.
  
  

  Of course, after making the selection drag selection (to the right of the layer) icon on the desired layer. This will move any selected layer to the new layer.

  

• ALT-click the icon layer adjustment does not work

  Hello

  It drives me crazy, I would be like Alt + click on the adjustment layer down in the layers panel to open the dialog window when you create a new adjustment layer. But it does not work. Sometimes the adjustment layer puffs a few options for a very short period of time, but nothing's going on time.

  No idea if something is wrong with my keyboard shortcuts?

  Thanks in advance

  Alex

  Try CTRL + ALT who should work.  According to me, told me it was a bug that was going to be fixed, but has not been yet.

• Click on the layer behind a transparency mask

  Is this possible to do?

  The mask is laid out in front of the layer that I want to click.

  If the mask is a symbol, then he's locked in a div. It's somewhat misjudged CSS which is very convenient for the passage of the click event handler in one div to another. (At least it was unknown to me until very recently.)

  pointer-events:none;

  See
  http://StackOverflow.com/questions/3680429/click-through-a-div-to-underlying-elements

  for some conditional expressions of IE. I hope this helps.

• Add Layer (overlay colors etc.) mess with sorting 3D effect.

  Bit of a weird one and I would say must be a bug.

  I have a complex walkthroughs 3D (branches, leaves, etc. of the tree) created from 2D Photoshop files.

  I wanted to add a bit of color in some of the layers using a color overlay.

  As soon as I apply the layer seems to go to the back of the composition ignoring its yard according to its position on the Z.

  The workaround I found is to re-arange the model as well as the layers are in the order they are in layers

  that is applying the style seems to be the layer back back to the 2D sort so put the layer I have first flythrough on the albums pop it back forward.

  However since my camera moves backwards in the Z of the comp plan that does not work in all cases.

  So for some, I had to comp before the offending layers and make color settings here.

  Not a huge mission, but not ideal for fine adjustment.

  I was wondering if anyone has a solution or just an explanation would be a good thing.

  See you soon

  Jono

  My system is brand new, so oven fresh installs of all.

  After Effects CS6 11.0.1.12

  Windows 7 Ultimate

  Intel Core i7 - 3770 K CPU @ 3.50 GHz

  32 GB of Ram

  NVIDIA GTX 690

  Solid State drive for system and cache.

  1 TB mirrored for project files.

  Bit of a weird one and I would say must be a bug.

  It is not a bug. It works as it should. Layer styles are applied after all the operations of the EA and thus break the 3D rendering. It's somewhere in the help. If you really need a few coloring Basic, to use other effects as fill, tint or whatever.

  Mylenium