By default the sharing of properties in planning

Similar Questions

• CANNOT write to files in the shared folder of XP on a PC running windows 7 - but good vice versa

  I have a laptop under Windows 7 (SP1) and a desktop running XP (SP3).  I have connected both via a wireless network. While I can see and access shared files/folders from one computer to the other computer, I can only read/write files in the shared folder on the portable computer that is running Windows 7.

  If I try and change a file in the shared folder from the PC under XP on my laptop, I get the message "this file is set to read-only. Try again with a different name "."  I know that the file is NOT checked for read-only. When I change the name of the file I get the error message "\\Desktop\SharedDocs\filename.doc you are not allowed to save in this location. Contact the administrator for approval.  You want to save in the folder my documents instead? "If I save the file to another location on the laptop under Win7 it save then OK.  I can not just save a modified version of the file in the same shared folder from desktop running XP.
  It seems that it must be something to do with permissions and access to the parameters of the desktop running XP but I can not find these. Fairly easy to find in Windows 7.
  Finally, I don't have a login/password set for the connection to the computer to Office XP.  I don't have a user name and password for the laptop Win7 but you have turned off password protected sharing.
  Anyone have a solution to this?
  Thank you

  OK - the problem is now resolved.

  I noticed that the read-only for the shared folder has been checked. When I unchecked it and also checked the box "allow network users to change my files" in the shared folder properties/sharing, I was able to modify and save files in the shared folder on my laptop.
  It's a little weird because I thought I had done this the other day where the results have been less successful.  Strange.
  Thanks for your help.

• Cannot bind to the shared object created with LabVIEW 2009

  I have problems referring to a shared library built from a LabVIEW VI under RHEL 5 with LabVIEW 2009.

  To illustrate the problem, I created a VI with a digital input and output that corresponds to a certain number. Then, I created a draft specification of build to create a shared library with a feature that makes use of this VI square. The shared object is created successfully (square.so).

  When I try to compile a test application written in C, that connects to this library, I get errors in the following link:

  cc  -I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintools build/square.so  test.c   -o test/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'collect2: ld returned 1 exit statusmake: *** [test] Error 1
  

  Running ldd reveals that liblvrtdark.so.9.0 is used for the execution of labview.

  In order to investigate on what could be the cause of the problem, I have compiled the nidaqmx basic examples, and I don't have an error. Current running ldd as reveals that he uses liblvrtdark.so.8.2 for the view of laboratory, time of execution.

  My suspicion is that some components of labview are being compiled with gcc 3.4 while others are being compiled with gcc 4.1 (which is the default compiler in RHEL 5).

  Any ideas how I could fix the build errors?

  Thanks in advance for your suggestions.

  PS.

  I enclose a tar file with the source files and here are the details of the ldd:

  ldd build/square.so         linux-gate.so.1 =>  (0x008de000)        liblvrtdark.so.9.0 => /usr/local/lib/liblvrtdark.so.9.0 (0x00b9c000)        libc.so.6 => /lib/libc.so.6 (0x00110000)        libstdc++.so.6 => /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 (0x009a7000)        libm.so.6 => /lib/libm.so.6 (0x00756000)        libdl.so.2 => /lib/libdl.so.2 (0x00256000)        libpthread.so.0 => /lib/libpthread.so.0 (0x0025a000)        /lib/ld-linux.so.2 (0x00b80000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00272000)
  
  ldd /usr/local/natinst/nidaqmxbase/lib/libnidaqmxbase.so.3.3.0         linux-gate.so.1 =>  (0x00e50000)        libnidaqmxbaselv.so => /usr/local/lib/libnidaqmxbaselv.so (0x00248000)        libc.so.6 => /lib/libc.so.6 (0x00689000)        /lib/ld-linux.so.2 (0x00b80000)        liblvrtdark.so.8.2 => /usr/local/lib/liblvrtdark.so.8.2 (0x00e51000)        libdl.so.2 => /lib/libdl.so.2 (0x00813000)        libpthread.so.0 => /lib/libpthread.so.0 (0x001b0000)        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x009c7000)        libm.so.6 => /lib/libm.so.6 (0x00b0a000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x0050c000)
  

  Hi mimi,

  I'm happy to report that I managed to get the code to work. I have included some of the steps I experienced the problem in case it might help improve the documentation or future generations.

  In response to your question about the "error 1" reported by do, it's just an indication that detected a compiler error (it probably resembles the return code of the compiler).

  The errors ' undefined reference... @GLIBCXX_3.4.9 "have been narrowed down. The generated labview shared library, the square.so, links to /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 which is a symlink to usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6.0.9. I decided to compare this version of libstdc ++ that included with RHEL:

  strings /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_3.4.9GLIBCXX_FORCE_NEW
  

  strings /usr/lib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_FORCE_NEW
  

  So libstdc ++ RedHat does not include a string for GLIBCXX_3.4.9.

  With this in mind, I was able to get my test application to compile using the version of LabVIEW libstdc ++ using the following makefile:

  .PHONY: all cleanCPPFLAGS=-I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintoolsLDFLAGS=build/square.so \        /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 \        -Wl,--rpath -Wl,/usr/local/lib/LabVIEW-2009/patchlib/
  
  all: test
  
  clean:        rm -f test *.o
  

  When you try to run the application, I got the following error:

  ./test: error while loading shared libraries: /usr/local/lib/liblvrtdark.so.9.0: cannot restore segment prot after reloc: Permission denied
  

  But apparently, it's because of SELinux prohibiting the use of libraries shared with moving text.
  This can be disabled by running /usr/sbin/setenforce 0 as root.

  The test application now works!

  See you soon,.

  RW

• How to create the shared library for linux real-time target in labVIEW Windows?

  I use myRIO running linux in real time. In my project, I need to pack some C code, so I tried the node library function call.

  I know that I should use the tools compile cross - compile linux on Eclipse to compile c code in linux .so library. But the problem is that call library function node does not recognize the .so file because my labVIEW runs on a Windows PC.

  What should I do to fix and how to combine C code with labVIEW during programming for devices shipped as myRIO?

  Basically, you must also create a Windows DLL that exports the same functions. These functions can be empty stubs if you do not want to run the code correctly on Windows, otherwise you will need to consider how to implement the equivalent functionality on the Windows API.

  Then you can write in your node library call as the name of the library ". "*" and the name of the shared library Windows ".dll" while the Linux version is called "name of your library > .so". LabVIEW will replace the * after the comma in the name of library with everything that is the preferred extension shared library for the platform it is running on and therefore load the right shared library.

  Alternatively you can wrap call all the nodes of the library in a structure that contains the node library in the case of Linux RT and all what you want to run on other platforms in the case of default or a case of specific platform, call the conditional compilation.

• I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer.

  I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.

  If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '.  It will not matter what username / password you provide, it will attempt to authenticate as 'guest '.  If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.

  If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect.  To turn off Simple file sharing:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Also:
  "Description of the account in Windows XP"
    <>http://support.Microsoft.com/kb/300489 >

  HTH,
  JW

• Cannot, by default the sound setting

  I can't put my default sound. I recently got my computer up to date and a few hours later, my sound doesn't work anymore, so my videos, too. I reinstalled my computer, but when he got to the point where you set defult sound, it wouldn't work. The 'Configure' and 'Properties' sections worked, but 'Set as default' would not. I am so frustrated because I need sound and video to make a lot of things on my computer.

  I'm the product: HP Pavilion Sleekbook 15 PC in Windows 8

  Product number: C6N92UA #ABA

  Can someone help me please?

  Have you tried the troubleshooting that I suggested? The alternative that you can consider trying before installing Windows 8.1 should refresh Windows 8. This cleans the operating system without affecting any of the files. Here is some information on how to do it: refresh your PC to solve problems (Windows 8)

  Mario

• How to change default file sharing...

  How can I set up FILE SHARING in the SHARING AND DISCOVERY in my NETWORK AND SHARING CENTER while it * by DEFAULT * off?

  Whenever I reboot, I have to go and change the option.

  Hi Newmarket2,

  Are a. When you facing this problem?

  Do you have b. installed a windows live care on your computer?

  C. is zone alarm installed on your computer?

  D. recent changes made on your computer?

  This problem may be due to conflicts of windows firewall. Try to configure your firewall to zone average and internet be set high and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-Explorer-security-settings

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/thread/ce7d1389-84F8-4747-9744-65b3423ad381

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Original title: Max the mouse

  I had a little friendly MS mouse pointer / cursor schema greet me on the initialize upward from Win 98 to Win 2000 Milnm, finally to Win XP.  It was simple, little grey mouse that has nibbled cheese if the program was busy.  Since the abandonment of Win XP, I bought a Dell E6440 with Win 7 Pro installed. I used a USB transfer cable / program to migrate settings and files above. My favorite mouse pointer scheme is not. I tried to change my plan of cursor recorded, but Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Someone at - he saw this original classic pointer / cursor for Win 7 64 bit?

  Thank you, Mr. Singh. That did not help.  But for the record, I finally found the correct cursor plan I was looking here: http://www.rw-designer.com/cursor-set/mouse download a .zip file that I had bad access to when you change the pointer of the mouse, but resolved by downloading each schema of cursor .ani and .cur individually on the site. I used this from Win 98 to Win XP.

• file permission security and files on the shared drive

  Hi, we have a folder called 'Team' in the shared drive \\India\Team. I placed an excel file named "Hourly" activation "share workbook" option for multiple users in my team. I have a total control on the 'Team' folder access I want to give read access to the members of my team 5 at the level of the 'Team' folder and change the access to my 5 members of the team at level 'hourly production' file so that all members can be updated hourly count at the same time. Limitation should be my team members should not be able to rename the folder 'Team' and should not be able to delete the file 'hourly Production '. I tried a lot of things, but it does not work. Please help me. My mail id is * address email is removed from the privacy *.

  Hi Christine,

  Welcome to the Microsoft community.

  According to the description you have provided to assign the read permission for the file in the shared drive.

  I advise you to check what are the rights that the user has to the shared folder. Please login as an administrator.

  a. right click on the folder, click Properties - Security tab - advanced

  b. click effective permissions, click Select, enter the user account, and then click OK.

  c. check what are count it the permissions the user has.

  d. If the user does not have sufficient permissions, click the permissions - changes to the permissions tab.

  e. click Add, enter the user name, click OK

  f. Select the appropriate permissions for the user, and then click OK.

  See: How to open a file if I get an access denied message?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  File sharing essentials
  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  If you have any further questions on Windows, feel free to let us know. We will be happy to help you.

• Custom attribute in the model layer properties

  Hey all,.

  Can someone explain the flow of the program "ADF practice: using custom attribute in the model layer properties of". "" Basically, how change custom properties like "customLabel" changed the label attribute. Is there properties specific adf we can refer to properties for the attribute?

  Reference will also be useful.

  Thank you!!

  What exactly you want to know?

  It's pretty clear from what I've read:

  You can set properties that are customized for each attribute in a vo. This is done in the vo attributes dialog box where the default value.

  You can override the default values that is done in the setCustomHints() method. This method is called by the button in the user interface (actionListener = "#{bindings.setCustomHints.execute}" ")

  The inputtext is set to display the properties for the label (label = "#{bindings.") DepartmentName.hints.customLabel}') and uses the custom readOnly property (readonly = "#{bindings.") DepartmentName.hints.readonly}')

  As the inputText component is updated after the button clicked on (via a pertial in the inputText trigger), it shows the a values.

  Timo

• Access the shared AM VO

  Hi all

  I use jdev 11.1.2.4.0 version

  In our AMImpl application, there are programmatic calls to LookupVO.

  Now, we have decided to move the morning shared LookupVO

  I created a new name TestSharedAM and adds this instance of LookupVO in this AM.

  Properties of the project, I changed the AM shared this morning.

  But the existing code of rootAMImpl was like this:

  public line [] getLookupValues (String lookupType, String lookupCode) {}

  Rank [] rows = null;

  If (null == lookupCode | lookupCode.isEmpty () | null == lookupType | lookupType.isEmpty ())

  to return the rows;

  LookupViewImpl lookupView= getLookupView();

  lookupView.setLookup_type (null);

  lookupView.setLookup_code (null);

  lookupView.setLookup_type (lookupType);

  lookupView.setLookup_code (lookupCode);

  lookupView.setRangeSize(-1);

  lookupView. executeQuery();

  lines = lookupView. getAllRowsInRange().

  to return the rows;

  }

  But I get an error that getLookupView() is not found.

  Please let me know if I missed something.

  Thank you

  ASHA

  If this code is executed in the application root module you must first search for the shared application module and call the getLoockupView() of the shared application as a module

  LookupViewImpl lookupView is getSharedApp () .getLookupView ();.

  Timo

• HELP - lost the button "calculate" in the "text field properties"! I try to summarize the total for separate text fields in a summary box.

  Help, please!  I try to summarize the total for separate text fields in a summary box, but have lost the tab 'calculate' in the 'text field properties area.  Any help would be greatly appreciated!

  When in forms editing mode (Tools > prepare form), select: more > return to the Acrobat form

  In the future, check the box 'this document requires signatures' when you choose at the beginning: Tools > form prepare

  unless you plan to use the form with eSign Document Adobe cloud service.

• Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod.

  Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod. This has been brought to the attention of Adobe in December of 2014 by others. If you import a footage in Adobe Premiere elements 11 or 12, you can eliminate the black bars on the sides by setting predefined settings correctly and using properties and interpreting the film. Not the same with 13 elements. What has been done to correct the problem? How users can be compensated for the purchase of a program or upgrade to a program that has a fault serious?

  Please notify.

  fran3

  What you report a known problem with elements 13/13.1 first I wrote about back in December 2014, and whenever the subject came up in the Adobe Premiere elements Forum.

  First Elements ATR troubleshooting: EP: 13 serious problem with. MOD Widescreen files

  I have not seen Adobe personal or PRE_help this issue whenever it appears in one of the threads here. The frequency of appearance of personal Adobe or PRE_help is not defined. It's a call from Adobe on ignore or fix in the next version or other.

  This isn't Adobe. Instead a user. You need to contact Adobe to know the why of the situation and what his plans are to remedy the situation in order to allow the usual workaround if this is a solution that will make unnecessary workaround.

  You have a chance by converting the widescreen is a mod to another format that would recognize the flag of 16:9 wide screen of is a mod, if 16:9 is really there.

  RTA

  Add on... Consider

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Impossible to change the path for the shared virtual machines

  Hello

  as long as user root, in the Preferences menu, shared, VMs when I change the location and

  (1) push apply 1 time, the path is created in the right place on the hard drive but when I want to share a virtual machine and move toward this path, the default path is the default: / var/lib/vmware... not the one created by the menu setting.

  Cannot change the location for the shared virtual machines.

  (2) push apply several times: odd error menu

  

  OS: Linux mandriva 64

  Any ideas?  Is this a way to manually change the path in a config file?

  Best respect

  Out of work station - stop pass.
  Then edit datastores.xml - don't know where the files on Linux - I expect it be in/etc/vmware/hostd or something like that

• Alias for the shared members in Smartview

  Hi gurus,

  I use Oracle EMP 11.1.2.3. I've migrated a planning 11.1.2.2 EPMA demand 11.1.2.3. The Alias for the shared members are not displayed when I go via Smartview, instead, is to show as [Parent]. [child]. But when I access the same application in 11.1.2.2, I can see the Alias.

  How to solve this problem?

  He was identified as a bug reading of this Oracle - Hyperion... Labs: Smart View issues with another hierarchy - Surprises in the fifth part of Essbase

  Concerning

  Celvin

  http://www.orahyplabs.com