By pulling the handles instead of Point?

Similar Questions

• How to access the handle through its pointer

  Hi all

  I have a problem regarding the use of the handle and the pointer. I try to use an external DLL library in Labview. In this DLL library, there are two functions, we're like:

  int32_t xChannelOpen (CIFXHANDLE hDriver, char * szBoard, uint32_t ulChannel, CIFXHANDLE * phChannel);

  and the other is

  int32_t xChannelClose (CIFXHANDLE hChannel),

  where this 'phChannel' is a pointer to a CIFXhandle "hChannel". Now, I want to highlight this handle 'hChannel' 'phChannel '. I think that's hard to do in C, but how could I do in Labview? Is there a method that accesses the handle of his pointer? I appreciate this very much for any advice.

  Thank you very much.

  Best regards

  Sun

  You don't need any special function for this. You must configure the call to the library function node call correctly. When you call xChannelOpen, you must configure the parameter phChannel as an integer pointer passed by pointer value. The value that will be returned in this parameter is the value of hChannel. When you call xChannelClose, passing the same value (the same thread), but this time set it up as an integer of size pointer passed by value.

• Management of data access Client pulling the registry instead of Web.config settings

  I have an ASP.NET 4.0 application configured with the managed provider of ODP (32 bit) via the customer install the production. It is configured with the following text in the root web.config file:

  <oracle.manageddataaccess.client>
    <version number="4.121.1.0">
      <settings>
        <setting name="TraceLevel" value="127"/>  
        <setting name="TraceOption" value="0"/>
        <setting name="TraceFileLocation" value="c:\temp\odpnet66.trc"/>
      </settings>
      <onsConfig mode="remote"></onsConfig>
    </version>
  </oracle.manageddataaccess.client>
  

  When I look for the trace file, however, I realize that it is written to a location set to HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ORACLE\ODP.NET\4.121.1.0.

  What needs to be done to make the provider read its settings from the web.config file?

  Additional information:

  <system.data>
      <DbProviderFactories>
      <remove invariant="Oracle.ManagedDataAccess.Client" />
      <add name="ODP.NET, Managed Driver"
           invariant="Oracle.ManagedDataAccess.Client"
           description="Oracle Data Provider for .NET, Managed Driver"
           type="Oracle.ManagedDataAccess.Client.OracleClientFactory, Oracle.ManagedDataAccess,Version=4.121.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342" />
    </DbProviderFactories>
    </system.data>
  

  You probably ODP.NET, pilot managed, also installed on your machine, if the registry entry, HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ORACLE\ODP.NET\4.121.1.0, has been created. This registry entry is not created by managed ODP.NET. Any tracing would flow from the ODP.NET, to use unmanaged driver.

  Some recommendations to try to allow managed ODP.NET tracing:

  (1) value TraceLevel 7 or reduce its value.  Managed and unmanaged trace level values are different. What are managed.

  • TraceLevel: 1 = Public API; 2 = private API; 4 = API/data network. These values can be OR ed. To enable all, set TraceLevel to 7 . Errors will be always drawn.

  (2) set the TraceFileLocation on a directory name, not the file name. Make sure that the location of the directory exists.

• Strange problem with getting the handle on Date field

  Hi all
  I m facing a problem very very special, in the exercise of the labsolutions when we're going to create the page of the employee, I m trying to pull the handle on the end Date field and the Starting Date in the EmployeeCreateCO in this way
  
  OAMessageTextInputBean mytestbean1 = (OAMessageTextInputBean) webBean.findIndexedChildRecursive ("EndDate");
  
  OAMessageTextInputBean mytestbean2 = webBean.findIndexedChildRecursive (OAMessageTextInputBean) ("StartDate");
  
  but this line he started class cast exception, I m not able to understand why, when I tested with another area such as first name, last name, etc., it is working file, this error comes with date field only, i'm puzzeled, as id is very correct and bean type fields are also very correct.
  
  Thanks in advance
  
  thanx
  Pratap

  Pratap,

  In my opinion, using DateField. So, use OAMessageDateFieldBean instead of OAMessageTextInputBean.

  Thank you
  Kumar

  Published by: Kumar Kovela, April 29, 2009 01:58

  Published by: Kumar Kovela, April 29, 2009 01:58

• My direct read anchor point selection tool and the handle when on these points, but is now box or anything. How do I change back.

  My direct read anchor point selection tool and the handle when on these points, but is now box or anything. How do I change back.

  Turn on view > Smart guides.

• Move the handles of direction in synchronization with the anchor point?

  Hi all

  I'm trying to move the anchor points on a random object (to get an informal aspect). (I know that some effects that already.)

  Maintenance of corner points is no problem - you just put the handles of direction to the same coordinates as their anchor.

  But I can't move an inflection point in the way I want it, which is to move the anchor point, but maintain the direction handles in exactly the same relation to their anchor as they did before. That is to say, they should remain smooth points.

  My script calculates the difference between the 'before' and 'after' the position of the anchor and applies this difference for the handles of direction... but in practice, the smooth points are converted at the corners, because the direction handles does not maintain their relationship with the anchor point.

  Would appreciate if someone can point out the flaw (s!) in my logic.

  var docRef = activeDocument;

  var activeDocument.selection.length = objects;

  var prompt = cShift ("Point change (pt)", 5 ");

  loop through all objects

  for (var count = 0; count < objects; count ++)

  {

  currentObj = activeDocument.selection [count];

  Nudge (currentObj);

  }

  function Wizz each object

  function nudge (obj)

  {

  var objPoints = obj.selectedPathPoints;

  var objPointCount = objPoints.length;

  for (var i = 0; i < objPointCount; i ++) {}

  var thisPoint = objPoints [i];

  var go = thisPoint.anchor [0];

  var vb = thisPoint.anchor [1];

  var = thisPoint.leftDirection [0];

  var lb = thisPoint.leftDirection [1];

  RA var = thisPoint.rightDirection [0];

  var rb = thisPoint.rightDirection [1];

  If (goes == the & & will == ra & & vb == lbs & & vb == rb)

  {/ / If the point corner, alternate the position of anchor}

  go = go + ((Math.random () * cShift));

  VB = vb + ((Math.random () * cShift));

  thisPoint.anchor = Array (va, vb);

  handles direction all at the same position, now a corner point

  thisPoint.leftDirection = Array (va, vb);

  thisPoint.rightDirection = Array (va, vb);

  }

  on the other

  {/ / not a corner point: keep handles in the same position relative to their offbeat anchor}

  var = va2 will + ((Math.random () * cShift));

  vB2 var = vb + ((Math.random () * cShift));

  thisPoint.anchor = Array (va2, vb2);

  This bit calculates random offset applied to the anchor

  var anchorShifta = va2 - going;

  var anchorShiftb = vb2 - vb;

  These lines apply the same quarters for direction handles

  thisPoint.leftDirection [0] = la + anchorShifta;

  thisPoint.leftDirection [1] = lb + anchorShiftb;

  thisPoint.rightDirection [0] = ra + anchorShifta;

  thisPoint.rightDirection [1] = BO + anchorShiftb;

  }}}

  Modification of the other part:

  else
  { // not a corner point: keep handles in same relative position to their shifted anchor
      var aShift = Math.random()*cShift;
      var bShift = Math.random()*cShift;
      thisPoint.anchor = [va  + aShift, vb + bShift];
      thisPoint.leftDirection = [la + aShift, lb + bShift];
      thisPoint.rightDirection = [ra + aShift, rb + bShift];
  }
  

• on the set of paths, select anchor points and move the handles at the same time

  Select a group of anchor points, I want to drag the handful of roping and have other anchorage handles to move the same angle and length than I'm moving, I can currently do drag up the warp through the paths tool to get some sort of equal effect I want but that is not always the same ,

  I wish that all grooves (paths) to have the same length and angle of anchorage handles. Thus, they maintain their relations. But I want to do this actively by dragging one of the handles to anchor, not by a dialog with preview,

  (I would also be viewing live update of the race while you adjust, not just of the paths)

  

  Quite simply... You can not.

  At least not without third-party plug-ins such as XtremePath or Control Point. And even then, you must move the handles, do not drag.

• using the PDF instead of HTML

  To the right at Adobe.

  After a careful examination of many current technologies for the content of the Web site (including HTML, PHP, Java, JavaScript, MySQL, etc. and systems such as Typo3, Joomla, etc), we decided to drop everything for PDF, being an ISO standard and the de facto standard for office documents. Everyone has Acrobat Reader is installed, the plugin is also installed, and so everyone is able to display a http://.../index.pdf. Problems that are common to other sites, such as the injection of SQL code, the need to keep a backup of SQL server, the demand of space (the naked typo3 installation requires 1 GB of server space), for example, they are all simply, we do not want. Following initial considerations and the advancement, an index.pdf file monkey 200 K holds today, our entire Web site. Dynamic content is loaded by SWFs included read various .xml files. The site displays beautifully on a Mac with Safari and Acrobat X or Windows XP with any browser. There are a few problems, however, which are still pending. Describe us them here.

  Index.pdf of the index.html call can result in a blank page, and the Acrobat Reader plugin makes no effort to inform and help the people customer. It turns out that the v10 of Acrobat Reader is not available on all platforms. For example, linux (ubuntu v11) and solaris (v11) still have Acrobar Reader v9. On linux or solaris, you see a "3d data parsing error" whenever you open a page with swf included.» This happens all the time. It only occurs if your version is different from the version 9.2. 9.3 and 9.4 show the above error. It's a problem of multiple roles, because the latest version on these systems is version 9.4; version 10 is not available from Adobe, and most of the people are not ready to go back to version 9.2, which is not available from the default package of the System Manager. Other systems are not without problems. Apple OS x, for example, the plugin is only available for Safari. If your default browser is Firefox, Chrome or Opera, you don't see the index.pdf. You have to use Safari. Apple iOS, even Safari fails to execute the index.pdf, because Acrobat Reader is not available for this platform. We have solved most of these problems via a HTML + JavaScript loader which performs a compatibility check-up. If all tests are successful, the HTML code then calls the PDF file. If the tests fail, then a courtesy message, explaining the problem and describing the steps the user must perform to solve the problem (s). If the user does not wish to use the Acrobat plugin, then the user is redirected to the RSS STREAM. The site is based on the RSS STREAM, and so the user has access to (most of) the content of the site. You can read this code at the following address: http://www.MadreAcqua.org/index.html. It is not enough, however. We had people with Acrobat Reader X installed on supported Adobe Systems, but their browser plugin remained version9; It turned out that the update of the Reader app could not update the Player plugin. On Windows 7 + updates, with Firefox 4 + updates and Acrobat Reader 10 + the index.pdf does not display included sovereign wealth funds. Note that it works on Windows XP + updates and Adobe Reader 10 with any browser. The failure on Windows 7 is a mystery. There are also people who are sick and tired of Acrobat Reader update by hand, or do not have the skill or the time to do it. It is also the source of the recent security problems.

  Below you will find other problems.

  1. the index.pdf includes sovereign wealth funds for its dynamic parts (RSS readers and video). Sometimes, random, sovereign wealth funds, do one of the following: they disappear (the only way to make them appear again is click on their area); they disappear and reappear as the Christmas lights (the only way to stop is to reload the page); also, they disappear or reappear when resizing the browser window.

  2. the mouse wheel allows to reverse the pages instead of scrolling. Specifically, each page of the site is displayed in its entirety. If we do scroll, however, the engine should try to scroll, find that the page is displayed in its entirety, and so nothing should happen. Instead, the engine displays the next page of the PDF file. The PDF file was built with the indicator "single page view", but the engine force mode 'to enable scrolling '. This seems to be a bug in the Adobe Reader software.

  In short, dear Adobe, please ensure that all platforms have the same version of the Acrobat Reader plugin, and that the plugin is updated automatically, in the same way to Flash Player 10.3. One plugin (pdf + swf) would also be useful. Please also make a charger official as part of the plugin, both to solve (mostly) the above problems and increase your own awareness of them. Otherwise implies your inability to offer its support to HTML ++.

  Best regards

  M.A.S.T.

  Not a bug - you're wrong points.

  If you embed a SWF file usinguniversal mode (Acrobat 8 and earlier versions) l, then it will never print, because it is never part of the PDF page. Legacy content is an annotation that is managed by an external program (in the case of the legacy SWF, a copy of office of Flash Player). For security reasons, there is no communication between the engine PDF printing and that the external program, so when you print the PDF file you will see nothing except the poster images.

  If however you embed your SWF in Acrobat 9 native mode +, it will play using the built-in Flash Player copy and will be printed, as long as you select "document and annotations" in the menu options and print on paper, it will look exactly as it does on the screen at the moment you press the button print, provided the SWF correctly handles step scaling.

  In addition, you can write a PDF with SWF file included for printing, but when you print it, the content of the included SWF file does not appear on the paper. This is part of our list of bugs.

• I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

  I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

  What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
  e '.

  example of extractedb.txt information:

  [email protected]

  [email protected]

  [email protected]

  * has a random number of emails as well *.

  I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

  Any help would be great = D

  Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

  game of mf to ((path to the folder as text) & "mail_list.txt")

  the value mf_List to {}

  the value sel_addr to {}

  the value mf_List to paragraphs of (read file mf)

  the value sel_addr to (choose from the list mf_List with title ¬

  ('Mail list' with multiple selections allowed without empty selection allowed)

  If sel_addr is equal to false then

  Error number-128

  return

  end if

  If length of sel_addr is equal to 1 then

  sel_addr display dialog box as text

  on the other

  the value Point to the text of TID to AppleScript delimiters

  the value Point text in AppleScript return delimiters

  display the dialog box elements of sel_addr in the text

  the value Text of point AppleScript delimiters to TID

  end if

  return

• How to speed up the handling of the table

  I need to generate two arrays of samples up to 20 million to simulate a quadrature encoder signals. I start with a table of examples of position and for each sample, I create a table with the representation of a single pulse and insert it in the table final as many times as necessary. I tried to optimize this code in many ways (using "replace subsets of the table" instead of "insert into tables" and leaving as much code as possible out of the loop FOR), but it is always very slow to run (it takes about 15 minutes just to treat about 10% overall on an i5 machine).

  Is there a faster way to handle this table? I read somewhere that "insert into tables" should not be used inside a loop, but when I initialize an array with the total number of samples and use instead "replace subsets of table" to insert samples execution gets even slower.

  See you soon

  
  

• 4635 Officejet prints black box in the header instead of jpeg image

  I have an Officejet 4635. I got it for probably about a year. Never had problems printing with it before. Recently, when I try to print a doc word with a jpeg image in the header, the image will print as a black box.

  I recently got a new router - an ASUS RT-N66U Dual Band 3 x 3 Router Gigabit Wireless-N900.

  Hey abeeftaco, (nice handle)

  You may very well be right! I recently installed Office 2013 and have no more question. Did not the connection until you pointed out.

  Thank you!!!

• What the handles, threads, and processes means or function, they are performing?

  My son will ask me a question and I could not answer (it is perhaps a good thing because I think he will try to enter and change something he doesn't know) so I thought that I felt I'd better try to find out. He and I are eager to know what the handles, son and process average or functions, they do. They are in the performance tab in Windows Task Manager.

  
  
  Thank you

  Hello

  A process handle is an integer value that identifies a Windows process. The Win32 API call a HANDFUL.

  When you start a program, this program runs as a "process". It's something that runs in its own protected area, with its own memory. Other processes cannot touch this memory.

  A few times, the program needs to do several things at once in a way of multitasking, similar to how the multitasking process. For example, a spreadsheet can recalculate the cells you enter data. He * could * start another process, but they can't (easily) share the memory, he would need to if recalculate cells!

  Must be a different sort of process that is not quite as separated. It is a "thread".

  Process: the number of applications that are running at some point in the computer.

  Hope this information helps.

• The upgrade of hardware "Point limits."

  I have read a number of posts on the topic of upgrading equipment, and always one already exists (Windows).  I went through a "test" with this before, and I would like to have someone competent after what is the current situation really at the present time.

  My computer is the one that I built myself (not a "store bought" a) parts purchased locally and online.  I am running Win 7 Home Edition, and I have the Windows 7 upgrade disk.  I use a Foxconn MB and an Intel Pentium 4 2.8 GHz processor.    I'm maxed out on RAM (to 2 GB) and the BIOS is years.  I want to upgrade to a new MB and a newer processor and of course, add more RAM. (I did take my decision quite yet, but I'll probably buy an another Foxconn MB and AMD Athlon II X 2 3.4 GHz processor.)   I intend to keep my DVD burner case, PSU, existing Tower (SATA) and drive HARD (SATA).  (I can add a second HDD and dedicate it to my music files, but it is undecided.)

  Last winter, I upgraded my wife's computer, but more broadly.  I bought a new case and added almost everything is new, but has attempted to use his HDD existing (with Win 7 Home Edition Upgrade) because the HARD drive was brand new and had plenty of space.  But when I tried to start, it wouldn't allow it, and after a few posts online, it was determined that the cause was "too new hardware."  I followed some of the suggestions post and called Microsoft to have Win 7 reactivated, but was told it couldn't be done.  That's when I discovered the 'points' system, but when I tried to get the detailed information on this subject, they would not give it.  In fact, a representative simply hung up - and I was not be rude, just by asking details, thinking that maybe I could 'reverse' and use a few pieces that I had deleted computer existing my wife temporarily and then complete the upgrade at a later date.  But no information has been forthcoming. I ended up buying a new HARD drive, install of Win XP (from the software disk it had before the upgrade to Windows 7) and only qualified to purchase the download to win 8 'special' happening last winter.

  I would really like to know from someone about what will happen with my computer if I swap on the MB and CPU, then add memory.  Everything else will remain intact.  Is that it will exceed the limit of Points, and I'm having the same situation?  If something has changed with the activation of the phone for Windows, that they would allow me to reactivate?  I'm not trying to rip off Microsoft or anyone using the same software on multiple computers. The parts that I take out (MB & CPU & memory sticks) travels to the heap to recycle instead of sanitation of our city.  But I'm not looking to use the same software on several computers, last winter, either, and that has not worked...

  All comments on how things work at the present time will be appreciated.  Thank you.

  If the original Windows 7 disks are full retail, you can install them on the new PC using the key code provided with the disks.

  Computer re to your wife...

  If she bought in-store, operating system would have been linked to the original motherboard BIOS, that's why you had problems with the new installation of the motherboard.

  Points to note.

  Retail operating systems can be installed any time it takes, but if the frequency is more than once every six months, you may have some explaining to do... :-)

  Installing Windows can be on the hard disk, but it is the motherboard that is the computer...

• Where are the handles to change the width of the circles?

  Well, Adobe keeps adding useless "feautures" Illustrator and with each update, I found myself faced with some cool new "development".

  So please help me out here: when I create a circle with the latest version of Illustrator - where are the handles to change the width?

  I know that you can recover the corners, but that could also change the height and is not accurate. And you can also just type the width you want in the properties of the object or use the transformation tool. But this is not the point.

  Adobe really removed the feature or I'm blind to find?

  Also: ADOBE BRING CURVE HANDLES ALIGNMENT ON THE GRID!

  Object > shape > expand shape changes it back to the old style, make an action,

  or do what I did--make a keyboard shortcut.

  So when you draw the direct form, hit the shortcut key and you are back to the old behavior of form in a second dish

  
  

  Edit > keyboard shortcuts > Menu commands > object > shape > expand the form .

  then in the first box on the right, click on it, select and press a key on the keyboard, I choose F9, OK and name it.

• allowing the attachment of the handles

  Hello!

  I just downloaded Adobe CC on my CS5.  I use Illustrator for my vector files and rely on the grid for each of them. I found this note they have disabled the slamming of the handles of the pen tool. How can I activate them?

  Adjustment handles are extremely crucial to the way I work. Without the handles snap, I'm losing time and precision with this new CC for 2014. Help, please!

  Snap handles disabling

  

  < b > (left) < /b > anchor points and handles, two, align a point of reference < br > < b > (right) < /b > Folders snap, but the handles are free

  
  

  This applies to situations when you have any type of snap (pixel, grid or point).  For example, in mode overview rasterized, the nod to Pixel function gets activated. This makes the drawing of restrictive path, because anchors and handles align with the pixels.

  Development: In Illustrator, CC 2014 anchor points will continue to honour the rules Slam, but handles will be exempt from this restriction. You have now better control in curves, even when the point of grid/pixel/alignment is turned on.

  As you can see they have disabled the Bezier handles to the network intentionally slamming in CC2014 most don't want that.

  You can place guides on the grid points you want to align. Your Bézier handles will be align to guides, as long as you also nod to the permitted point.