by using the function key in the simulation

Similar Questions

• Changes in the driver vi using the Simulation Interface Toolkit (SIT) for PXI get do not appear.

  Hello

  I use Simulation Interface Toolkit to target a controller built in Simulink on a PXI target. I used the SIT connection manager to generate the driver screws I had to make some changes in the screw driver specifically Read.vi IO. I made the changes and the entire application runs without error. But the changes are not getting in the functioning of the application, essentially when I load the thing on PXI and run it, it contains exactly as it was before behaiving I made these changes. Some how the changes I make to the Read.vi of e/s are not begin day somewhere in the top vi driver.

  Could someone help me with this please.

  Eliane.

  Hi Justin_P,

  Thank you very much for the reply. Solved the problem. What you're saying, that's certainly true, but I do not use the project.

  The problem was that whenever it makes a change one driver that saw VI top-level driver must be opened and saved again. This opening and registration links the pilot with new changed correctly VI and then everything works fine.

  Thanks again.

  Eliane.

• Location using the simulator tests

  I use Eclipse to develop and test a "Hello World" application I've included resources files for English and the French understand and test the localization of the application plan. I am however stuck, test the application with the french properties.

  I tried to configure a new profile in the simulator by providing "/ local en =" as a parameter of the command line in the hope that the Blackberry Simulator will use French as the default language and so the French beam will be used for rendering the user interface. There is a generation of application step I'm missing to get the location missing?

  Any help to test the localization will be much appreciated. Thank you.

  It is a fairly old article, but as far as I know, it is still correct:
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/801083/How_To _...

• by using the Simulator on Eclipse

  I have been using eclipse for the coding and packaging, this is a nice tool.  -for debugging, I used the Blackberry JDE. Currently running the Simulator in the BB JDE is not complicated but when multiple API versions has to be tested as well as having a production version and a version of development running the number of workspaces increases. I therefore decided to take a go at the Simulator in Eclipse. After an hour I had it almost working but finally ends and "Device error - Blackberry Smartphone Simulator", "the catastrophic Assertion failure". If the BB JDE Simulator is "screwdriver", the eclipse is a double "Swiss Army Knife". So many settings and not a lot of explanation (that I found). Is there a 'manual' on the use of the Simulator on Eclipse somewhere?

  For example. In the BB JDE, I put a flag on a module is a module system, and must be loaded initially. Not found in Eclipse. There are a lot of other parameters. I want just a basic configuration which works like the BB JDE. The main application is a Midlet and my modules are still running listeners

  It is a mistake of the BlackBerry smartphone itself Simulator (Windows application), not simulated applications.

  Please, try the following:

  1. Click the Project menu in Eclipse.
  2. Choose BlackBerry-> own Simulator...
  3. Select all, and then click OK.

  This will reset all the BlackBerry smartphone simulators to their default state.  Now repackage and run your application again.

• Send message or e-mail using the Simulator

  are there opportunities that we can send an email or a msg using Simulator?

  Can of course.  Have a look here:

  Send and receive e-mail messages via the simulator of BlackBerry email offline server

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/send-and-receive-email-messages-throug...

• by using the Simulator 2.0 playbook, which is the password?

  Hello

  We have updated the Simulator 2.0 playbook, open VMware: file > open the virtual machine > BlackBerryPlayBookSimulator.vmx and run it.

  At the start of Simulator to request a password, which is the password?

  Thank you

  Yes. "playbook" without the «»

• Return to win 10 to Win 7 - cannot use the special function keys

  Hello!
  I updated to windows 10 two weeks ago and since then I had to restore to factory settings.
  I didn't know that it would remove Toshiba programs, but there.
  I cannot now use special function keys but I want them back.
  What makes Toshiba program and what other programs Toshiba should I re - install.
  Thank you.

  I'm not back to win 10 to Win 7. I win 10 and I want to download the programs I lost BUT...
  PSKC8A-09V00S: part number you entered is not a device recognized supporting the upgrade to Windows 10. Please double check your part number and re-enter.
  ..... How to do that when I get this message? Is this to say that I'm stuck with Win10 on a Toshiba laptop without programs Toshiba? And if my device does not support windows 10, why I sent the upgrade, and why Win10 seems to work very well on my device? Can someone answer this?

• How to change the default function of the function keys f1 to f12

  I prefer to use as FUNCTION KEYS function keys. I don't want the default value to a fast forward or backward, stop or sound options. I want f2 f2 (edit excel cell) and so on.

  Currently, I press fn everytime. It's boring.

  Is it possible to change the default key for what was originally planned? HP did find that impossible so far.

  On a HP G72 laptop keyboard.

  You can disable this feature by turning off "Action keys Mode" in the BIOS...
  
  Here is the document, which will help you in this... http://support.HP.com/us-en/document/c02035108

• Is there a documentation about the configuration of the function keys (program)

  Is there a documentation about the configuration of the function keys (program).

  Dell Dimension 1400, model XP SK8110 keyboard.   Yes, I know there are 7 years old, but running like a champ.

  Hello

  You can use various function keys to activate certain features and commands only. The following list details the current functions keys, what they do, and when you can use them.

  Three keys can be used when Setup is loading and when you are prompted to press the F6 function key to install some third-party small computer system interface () SCSI and host controller drivers:

  • F5 - for computer type or hardware abstraction layer (HAL) selection
  • F6 - to install the SCSI controller drivers and third-party host
  • F7 - to run Setup without Advanced Configuration and Power Interface (ACPI)

  When the "Welcome" screen is displayed, the following function keys can be used:

  • F2 - to automatically start the process (ASR, Automated System Recovery).
  • F10 - to bypass the menu screens and to load the Recovery Console

  During the GUI (GUI) - Mode Setup, the following function keys can be used:

  • SHIFT + F10 - to enable access to a prompt during the installation in graphical Mode
  • SHIFT + F11 - to display "old" wizards that give more detail.

  Thus, it is not possible to configure the function keys to perform this task. However, you can use your favorite search engine to perform this task.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Ripple error deployment to the simulator fails

  Hi, I'm taking my first steps in development of BB. My company asked me to do a BB - app with IBM work lamp. I installed the SDK Webworks, waving and a BB Simulator (model 9900). I also added the necessary environment variables on Windows 7. I did a hybrid application that contains the html, css and javascript. After the creation and deployment of the local console of the work light, I can open the app with ripple. After the start of the services, I can pack and start the work of packing App., but the deployment on the simulator fails. I get the following error:

  Spawning Simulator 9900 - 7.0.0.384...

  stderr: CreateProcessW: the system cannot find the specified file.

  Exit take flight for 9900 - 7.0.0.384

  I have seen this error on the forum, but others had when packing. I get it through to the Simulator. Can someone help me with this?

  I solved my problem by choosing another Simulator, 9860-model. Ripple now starts the Simulator, which is extremely slow. The hotswap function crashes immediately, but the Simulator works with my application. However I am concerned that blackberry development tools is so buggy. But as long as I don'tn use the simulator that's good enough.

• LabelButton blurred embedded fonts in the Simulator and the rendering of the fonts of the differences

  Hey people, party

  I have problems with the fonts embedded in LabelButton not made cleary by operating in the Simulator. They are crunchy when added stand alone. The button is on whole pixels and I double checked that the text in the button field is also on a set of pixels.

  Autonomous mode:

  

  Simulator:

  

  My code:

  public class GenericLabelButton extends LabelButton
      {
          protected var labelStr:String;
  
          public function GenericLabelButton(labelStr:String)
          {
              this.labelStr=labelStr;
  
              super();
          }
  
          override protected function init():void
          {
              var format:TextFormat=new TextFormat();
              format.font="font_helveticaNeue";
              format.size=16;
              format.color=0x000000;
              format.align=TextFormatAlign.CENTER;
  
              super.init();
  
              setTextFormatForState(format, SkinStates.DISABLED);
              setTextFormatForState(format, SkinStates.UP);
              setTextFormatForState(format, SkinStates.DOWN);
              setTextFormatForState(format, SkinStates.SELECTED);
              setTextFormatForState(format, SkinStates.DISABLED_SELECTED);
              label_txt.embedFonts=true;
              label=labelStr;
              label_txt.x=Math.round(label_txt.x);
              label_txt.y=Math.round(label_txt.y);
          }
      }
  

  Everyone knows this? Is font_helveticaNeue a bad font to use for the development of the PlayBook? Should I use the native font instead?

  I would also add that I use the police elsewhere in my application as a plain text field and it makes fine/crisp in the Simulator.

  I could use the native components wholesale, but I tell myself that I should at least try to use my own fonts.

  And while on the subject of the native LabelButton...

  Why text makes it differently in the Simulator this autonomous? The bg of the LabelButton doesn't resize correctly when I use the Simulator. Should I have the fonts installed on the host computer?

  Autonomous mode:

  

  In the Simulator:

  

  Would appreciate any input in this...

  Thank you

  SMJOHN

  Whoops - just realized I wrote this for you questions about LabelButton, and TextInput in which case you will need to use the textfield label_txt as you have already done (this is the default TextField fom flash.text).

  Embedded fonts will make in the TextInput QNX on the Simulator, as they do with TextInput fl.controls Flash; 100 times greater than the vector shapes.

  To make them look good, you need to change some properties of the TextInput textField.

  You can adjust the sharpness and thickness to your taste. The gridFitType property can also help alone. I have not tested it without the custom of the AA, however settings.

  _textInput.textField.antiAliasType = AntiAliasType.ADVANCED;
  _textInput.textField.sharpness = 1;
  _textInput.textField.thickness = 25;
  _textInput.textField.gridFitType = GridFitType.PIXEL;
  

  I have attached a before and after the screenshot of the Simulator. Unlike my screenshot, make sure the size of your type TextInput and/or its TextField correctly do not cut the Downhillers. Myriad Pro is displayed.

  TextField reference for anyone who comes across this thread and he needs: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/text/TextField.html

  

• Can I use the XCode with CS6 Flash Pro iPhoneSumulator

  I think it's possible, but I can't find clues on how to start.

  Anyone know how I can use it. The Adobe iphone Simulator is not very helpful at all. and does that iphone Anuak

  Thank you

  Assuming that you are aware of the CS6 updates, and you have installed XCode, you do the following:

  In your FLA that is configured to use AIR 3.4 or later, look in the application settings, general tab.

  You should see a field labeled "iOS Simulator SDK: Here, you put the full path to the Simulator. The path is more likely to be:

  /Applications/XCode.app/Contents/developer/platforms/iPhoneSimulator.platform/developer/SD Ks/iPhoneSimulator6.0.sdk

  Once you have done this, you should be able to do the two film of Control/Test/iOS Simulator and the Debug/Debug/iOS Simulator movie.

  If you do the debug version, wait the progress edition disappeared, the Simulator is open in the background and select Debug/Begin Remote Debug Session / ActionScript 3.0. Once Flash is "waiting for connection", hover over the Simulator and open your application.

  You can see that the icon is on the second page of icons. As you would on the iPhone, you can move the icon in the dock of the Simulator, or on the first page of the icons. Then when you other tests the app will be installed in this location.

  By using the Simulator will save you hours of time!

  Oh, one other thing - you can simulate multitouch by holding down the Option key, which will give you two points in finger on the Simulator screen mirror, which is good for stocks pinch test. If you also have the SHIFT key, you will be able to simulate stock pan.

• SDK can not connect to the Simulator in VMware

  My operating system: Windows 7 64-bit

  SDK version: 10.0.9; Build id: v201212072306

  VMware Player Version: 5.0.1 build-894247

  Video card: NVIDIA GTX 560 Ti

  I'm trying to use the simulator of 10 BlackBerry, running in VMware Player, to test applications under development in the native BlackBerry SDK. However, when I try to run these applications from the SDK and connect to the Simulator, I see that even though (I think) I got the correctly configured IP address for the target, it is still listed as "Not connected" in the list of Options of the target (I don't know if this is normal or not). Then, if I try to launch the project in any case, I get the following error message:

  "Unable to connect. Make sure USB cable or Wi - Fi is connected, the IP address is correct, and the mode of development. »

  Sorry if I didn't explain very clearly, this is very new to me, and I still have trouble getting my head around it. I'm sure there is probably some information that I forgot to include in this post, but I will provide if I think that whatever it is.

  I have been looking for solutions to the question, but it seems that there could be many possible causes, so I thought it would be better to make a new thread specifically for my situation. I tried the following:

  -Check that the development Mode has been activated (it seems that it has been enabled by default)

  -Ping I thought several times, was the IP address of the command line simulator (sometimes I had to meet with success, but not at the beginning)
  -Disabling Windows Firewall
  -Running a .bat file with 'ipconfig/release; ipconfig / renew. ipconfig/flushdns ".
  -I check the correct target for the Simulator IP address (double-check this confuses me a little, but I think I can find it in "Settings"-> "About" simulation-> 'Network' menu?)
  -Temporarily disable Avast! antivirus software to check if she is interfering
  -Verification of VMware Windows were running (I think he installed four of them in total)
  -Uninstall (then reboot) and reinstall the SDK, Simulator and VMware and restarting, repeatedly

  -Windows asked to troubleshoot the connection of VMnet8 of VMware; He said DHCP must be enabled, but then failed to do this for me (this left me confused; I wasn't sure if it was important or not)

  -Passage of the NAT VMware Bridged mode for the simulator mode, then the connectivity test (it doesn't seem to help, and the "About"-> page 'Network' in the simulation was empty), then power back up

  Any help or any what pointers to additional information, I would give, would be greatly appreciated. Thank you!

  EDIT: I also cant seem to get QML previews to work at all. I don't know if it is related to my other question, but I thought it might be worth mentioning, and this is something else I would try to fix, if possible. I tried to update my drivers, but to no avail.

  Solution found! I just tried to add a target in the software development kit using the IP address on 'Settings' of the Simulator-> "About"-> "Network" screen, but the target has been filtered out of the list, unless I unchecked "target filter based on the selection of C/C++ applications". If I unchecked, the target has been classified as ' 192.168.31.128 (Neutrino / x 86) ', but the Run button was grayed out when I chose it and I noticed the error message, ' binary Selected target do not match x 86 "at the top of the window." I have googled this error message and found the following (quite old) thread:

  http://supportforums.BlackBerry.com/T5/native-development/QNX-IDE-target-selected-binary-and-target-...

  After reading through and testing, it turns out that all I had to do was change the active configuration in the drop-down list at the top of the window SDK 'Device-Debug' for 'Simulator-Debug", little"hammer"that I needed to build to the Simulator and not a real physical BlackBerry device. Here is a quote from the post of cdamus, which is where I found the solution:

  "A little trick to streamline your workflow: prospects for development C/C++ has a little"hammer"toolbar of action that you can pull down (click on the black triangle next to it) to define and build the active configuration in one step, for one or several projects."  The icon to the right (it looks a bit like a sundial) defines the active configuration, but is not build. »

  I took a screenshot to help indicate the setting that I need to use:

  

  Hope this helps you chuma and anyone else who has this problem. Thanks for the tip, cdamus!

• Unable to connect to the Simulator (169.254.0.1)

  I installed the new Simulator available for VMware Player and have successfully startet it. (Windows 7)

  The Simulator have internet access (I launched a web page in the browser)

  But I can't connect to the device either by ping it in cmd command prompt or the

  plugin in eclipse.

  It is said in the Simulator: use development mode ON and development addresses 169.254.0.1

  Any ideas?

  The value in the security setting is the IP address that will be used when a PlayBook is connected via USB.  You can connect the debugger using the WiFi IP address or IP address of the USB device.

  In the case of the Simulator, the USB connection is not possible if you need to connect using the simulated WiFi connection.

  The icon on the home screen shows all of the IP addresses, you can use to connect to (it will show WiFi and USB IP addresses if both are available).

• SE connect Blackberry 10 Simulator and BBM works does not in the Simulator

  Hi all

  I use QNX momentics IDE for development and blackberry 10 Simulator.

  I use the simulator using VMWare workstation. A problem that occurs is that my Simulator is impossible to connect to BBM. Although the Internet is there on Simulator (checked with the browser on Simulator). As far as newspapers are concerned in the case of the blackberry simulators 9900 and 9930 counted out newspapers and event logs.

  But in this Blackberry 10 Simulator, I could not find newspapers where they are generated.

  Please tell me the location where in 10 blackberry Simulator logs are generated.

  Thank you best regards &,.

  Tushar

  for newspapers, check out this link

  http://supportforums.BlackBerry.com/T5/native-development-knowledge/debug-on-the-device-with-console...

  Please mark as solution if it helps

• File in the Simulator connection

  Hi all

  I'm doing the connection files on Simulator and I already tested many articles on how to establish the connection file, but unfortunately no good result.

  1.I created the file by clicking on res folder and add a file 'file '.

  2.i add file by right-clicking on the folder of the file and add the file to the link.

  3.I write the following code

  FileConnection fileConnection is ("myfile") (FileConnection) Connector.open;.

  Here, if I write something like "file:///store/...". "without exception occur but false return fileConnection.exists ().

  Can someone help me open connect using the Simulator or just how to play this file?

  Hello

  I think that you must use FileConnector to read the file in your workspace. Just use Class.getResource for InputStream. I hope this will help.

              InputStream input = this.getClass().getResourceAsStream("\myfile.txt");
  
              ByteArrayOutputStream baos = new ByteArrayOutputStream();
              int j;
              while ((j = input.read()) != -1) {
                  baos.write(j);
              }
              input.close();
  
              byte[] data = baos.toByteArray();