c ++ shared files
I am trying to load an image from the film in a qImage, but have not been able to get to load the image
I'm running an image from the active folder using
QImage image("app/native/assets/images/myImage.png")
but once I try to change to shared using file:///, local: / / /, not / / /, it is not through any image
a few examples
QImage image("file://" + workingDir + "/shared/camera/camera0001.png") QImage image("shared/camera/camera0001.png")
* Permission of files shared is set
screenshots taken with the two volume under png buttons so I gave them a shot.
* Update *.
Png & jpg at work to help
QImage image("/accounts/1000/appdata/sandboxFileName/shared/camera/camera_00001.jpg");
It was necessary to have the / before the accounts
Tags: BlackBerry Developers
Similar Questions
-
copy or duplicate in sharing files cannot point
IM currently on 5.0.15 Server with OSX 10.11.3 3 computers (clients) on OSX 10.11.5 and have found that they can not copy or duplicate in sharing files to point to the server. When you attempt to reproduce or copy a file you get the following message "unable to connect to the server because the name or password is incorrect." However copy on another share point is fine. Just won't work in this share point. Moving the file is fine. Any other Client computers are on OSX 10.11.4 or lower do not experience this problem. Should I update it with OS and App Server and hope that this question will far more recent? Thank you
I just checked using the latest version of the Server 5.1.5 and client OS X 10.11.5. and duplication and copying files works very well for the actions of the SMB and AFP.
If you have only tested using higher level, create a folder and see if the problem occurs when you are working on files inside this folder. If it isn't, then you have your bad permissions/ownership/ACL on the server. You should check the ACL as well as Posix ownership and permissions.
Also, try to remove the part in the sharing Panel and then Server to add it again.
C.
-
Installation of airport for sharing files on multiple devices
Hoping for insurance that I have not bought the wrong thing if you please...
Just bought a Time Capsule of airport in the belief that it can be used for WiFi sharing of files between an iMac running El captain, two iPads, (including the paces) and various iPhone 6. All running the latest OS version popular with all updates.
I have a WiFi router from sky as the main broadband connection and connected the Airport via the cable.
Here's where I fight - I can't figure out how to see my iPhone files. I have Airport utility loaded and he can see the airport and the new network created during the installation. I'm unable to access the drive, however. I have external hard drives I can connect to it for extra storage shared but that beats the type of object for me.
Heres so gasoline:
I put in the airport place incorrectly
I caused the problem by creating a new network
I should junk the router from the sky
I have to use iTunes etc to access shared files
I send back to the airport and buy something else
Or otherwise I'm just a techno-pleb?
Any advice would be greatly appreciated thanks
Apple has not designed the iOS to work the way you plan to use. It is not planned to work at the level of the files at all.
So, to access the files on the TC, you must use a third-party application... the best known is the filebrowser. But there are others.
Even if it won't the ipad works as a computer... It is not expected to be used this way.
There is nothing wrong with the TC... It's probably the best device for work... Since no other hard drive Wireless will do better. The question is purely iOS not TB.
-
Toshiba 32L3433DG DLNA setup - how to navigate the shared files
I activated in multimedia sharing options, I put media player on server base sides... but please tell me... where I have to go or do on my TV to browse folders shared network (in this case movies)?
It's a big mystery I see
You can use this TV as MEDIA Renderer.
This feature allows reading/sharing files stored on a MEDIA compatible smartphone, tablet pc or laptop on the TV. Install software on your device and read the instructions in the Software Division for more information.
To activate the MEDIA converter and press left or right to toggle key is characteristic.The media browser also lets you access the multimedia files stored on USB storage devices connected to the TV or MEDIA servers in the same network.
To launch the media browser window, press the arrow of reading on the remote control button. The media browser menu is also accessible from the main menu. Press MENU on the remote control. Select media browser by pressing the right / left and press OK.
Select the media type to appear and press OK. If there is more than one media source available, a list of the devices and servers will be displayed. Highlight the device or server in the list and press OK.All the details are here in the user manual:
http://www.Toshiba-OM.NET/LCD/PDF/English/L3433-32-English.PDF -
How to access a shared file on my RN212 NAS remotely from another program?
I've looked everywhere trying to find how to access a shared file on my RN212 NAS remotely from another program (kodi) on my iPhone 6 more remotely, away from home. I tried to FTP, UPnP, HTTP, etc. anything and it's driving me crazy! I run the program kodi from my phone for watching videos stored on my SIN, I have a router NightHawkR7000 and believe that I am fairly warned to get this figured out, but apparently not lol I have all the correct ports forwarded, but perhaps I'm missing a step somewhere. Any help on this would be much appreciated!
-
Access to the shared file on JB
On my previous phone, a Droid X running GB, I was able to access the shared files on the networks of my home and office via an option in the shared folders in the file manager. I don't see point in GB.
Any help with this would be appreciated.
Go to the game store and get a file management application. Most of them will give you this functionality. I like Astro File Manager and I also know that it doesn't have this feature. I hope this helps.
-
shared files Windows server 2008 when I try to access the logged error shows try 704 form again later. While it uses this file from the last three months
Hi Maury,
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please post your question in the TechNet Windows Server 2008 R2 Networking - read only forum.
-
I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.
I can access the shared files of most of my computers on the domain, but there are a few that have WINXP Pro can't do. Some of the XP computers can access it, but the only people who can't are XP. I think it might be something with the local security settings, but I'm not sure. The error I get is: \\server name \sharing folder is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions. The request is not supported. All users have permissions and can view the files from other computers just these few who have been able to do actions. Any help would be useful.The procedure below: the problem: give perminiant solution pls1. delete the field and add the domain2 delete the user profile, and create user profile.Error:An error occurred during connection network Y:to\\server\common Microsoft windows folder: the local device name is already in use. This connection has not been rerun.Hello
I suggest you according to the question in this forum and check if that helps:
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
It will be useful.
-
I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.
If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '. It will not matter what username / password you provide, it will attempt to authenticate as 'guest '. If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.
If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect. To turn off Simple file sharing:
"How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
<>http://support.Microsoft.com/kb/307874 >Also:
"Description of the account in Windows XP"
<>http://support.Microsoft.com/kb/300489 >HTH,
JW -
Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
Error 0X803C0107
Details of the editor for Windows Firewall troubleshooting
Verified issues
You cannot access shared files and PrintersYou cannot access shared files and printers
You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked
No workingRemote Assistance remote assistance does not
When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked
Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall
On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked
Windows Firewall service is not his firewall service is not started
Windows Firewall service is not running or is not started. Checked
Issues checked the details of the detection
6 you cannot access shared files and printers checked
You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.
Unlock the file and printer sharing in Windows Firewall works not
To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.
6 remote assistance works not verified
When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.
Allow Remote Assistance in Windows not running Firewall
Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.
6 Windows Vista could not start Windows Firewall check
On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.
Set permissions for the registry keys concerned not run
Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.
6 Windows Firewall service did not start Checked
Windows Firewall service is not running or is not started.
Start the Windows Firewall service is not running
Start the Windows Firewall service solves this problem.
Details of detection
Collection information
Computer name: NORMBRESINSKI
Windows Version: 5.1
Architecture: x 86
Time: 09-20-2010 07:51:49
Publisher details
Troubleshooting Windows Firewall
Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work
Package Version: 1.0
Publisher: Microsoft Corporation
You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
-
What services to enable for sharing files for XP Pro?
Hello
What are the complete list of services that must be enabled to provide file sharing (sharing files simple not) on Windows XP Pro?
Some time ago one of these registry cleaner programs off a bunch of standard services, and now file sharing does not work. 'Sharing' does not even appear when I right-click on a folder.
I enabled 'net logon', 'server' and a few others, but it still does not work.
Thank you
AlexThat's the problem with reg cleaners, they do more damage that they heal
-
Windows XP can't see shared files and folders on the system Windows 7 Home Premium 64-bit
I have a wireless home network. When I got Windows 7 Home premium 32-bit on my desk - my XP laptop was able to share files and folders.
Today, I upgraded my computer to Windows 7 Home Premium 64-bitNow - my Windows 7 Desktop can access files on my XP laptop - BUT - I was no longer able to access to any shared files and folders on the Windows 7 desktop. I checked that matches the name of working group. And on the XP - when I go to the Add Assistant preferred network and make a Browse.When I select Microsoft Windows network and task force - I see my office listed. But when I try to select - the OK button remains grayed out.I would appreciate your help on this.Thanks for your help - but I just found out the problem. In the advanced sharing settings, I forgot to select Enable turn off password protected sharing. The second I chose no-all the files and folders that I set to share on the Windows 7 system became available.
Thanks for your help, anyway. -
Sharing files between two users on the same computer in W7
I did the "shared" files, but they don't show up when the other user is on the computer. There is obviously something else must happen.
Hi George Smiley.
Follow the steps mentioned in the links below to share files, then check if that helps
File sharing essentials
http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials
Share files with anyone
http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone
Sharing files with the Public folder
http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think -
Disable the password for sharing files/printier
My desktop crashed last week and once we had it up and running, I'm more able to share files between my desktop and laptop computers; and can no longer print from the laptop. The network recognizes the other computers, but on the desktop, which is running Vista home premium, it is said that sharing file and printer sharing is password protected. No password was never created, desktop and laptop computer that is running Windows 7) have been recently restored to the State of factory caused by a virus. I tried other solutions, but I still have this problem. Any suggestions?
Hello
Look at the center network (Control panel/Network Center) and make sure the password protected sharing is off.
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Sharing files between Windows Vista and Windows 7
Have a PC running Windows Vista wired that you can share files on the remote laptop running Windows 7, but the laptop cannot see the main Vista PC. So he can't share files or printers. The laptop has no problem to access internet.
Configure any firewall program to allow access by other computers on the local network. Note that some antivirus programs include firewall features.
For installation tips, see sharing files and printers with different versions of Windows and networking of computers running different Windows versions . Boulder computer Maven
Most Microsoft Valuable Professional -
Who would be the unknown contact in a shared file?
Who would be the unknown contact in a shared file? Can I know who is this unknown?
Hello Sheryl plunkett,
Look at the thread below for possible suggestion for 'unknown '.
http://social.technet.Microsoft.com/forums/en/itprovistasecurity/thread/2cf1b2ca-d6e6-4D6C-bad0-20ca57d5189fLet us know if that helps.
Marilyn
Hi Rickbsk,
You can check out the link and check the suggestions provided by scotty1294.
If you have not tried all the suggestions above, try and see if it helps.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
My iPad is running slower and slower.
I closed all applications with no improvement. This can take up to 2 minutes to load a web page. If I do a complete factory reset and deleting. When I log into iTunes and iCloud will be my photos be available? I don't want not to lose them.
-
Calendar quarter don't mirror calendar on iPhone
I have the calendar in my set shows mirrored the calendar app on my iPhone. After the first synchronization of my iPhone with the calendar on the watch watch looked the same as the iPhone. However, I wanted to only 2 of my 7 calendars iCloud from the
-
I get a blue screen everytime I reboot my laptop. I run Win Vista. The error I get is DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033). I am not able to know which driver is causing this pro
-
I can't find the code for the printer or the menu of the printer 6500 E-mail address
I can't follow the instructions to retrieve the code for the printer, I see the symbols but don't see how to print, or to get the Email address of the printer menu
-
Help with CD drive not reading CD!
My wife recently purchased an iPod, and when we tried to rip CD, CD said he could not 'read the media' on the CD... and after having tried with 2-3 different CD I got the same result. I updated the drivers from the CD-ROM and used "FixIt" Microsoft