C4180 all in one photo print problem

Similar Questions

• Dell 964 all in one Photo Printer not Scan

  I have a desktop Dell Dimension 3100/E310 with a Dell 964 All In One Photo Printer.  I have Windows XP on it.

  I had to re - install the printer drives and software.  I can get the documents to print correctly.  I can get the printer to scan by using the controls on the printer.  However, if I try to scan from the Dell 964 all in one Center on the computer, I get an error message that says:

  Scan failed

  Try these solutions:

  * Make sure the all-in-one is powered.  (IT IS).

  * Disconnect and reconnect the USB cable.  (I DID.)

  * Disconnect, then reconnect the power cable from the all-in-one.  (I DID.)

  * Restart the computer. (I DID.)

  Nothing has worked.

  Does anyone have any suggestions?

  Thank you.

  ColemanCreative,

  You should be able to scan from the Dell all-in-one Center.

  Make sure that the application that you want to scan to figure on the list. Try to read...

  Update of the list of applications to send scans to

  If you are trying to scan to a PDF or by fax, you must install the OCR program from the disk of the printer.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• HP Deskjet All in One 3545: printing problems

  1 shows low ink icon. A left less, just half. Thought b & w cartridge is low. Ordered and this has changed. Print an alignment page. During the printing of new document, new alignment message came. Returned and gave the print order. Print a faint fary. Check the ink level. Right and left less. Stop printing. What needs to be done?

  2. when the printer is on, sound of NEEQ move is not smooth, little stumble.

  3. If put more than one paper in the tray, all are drawn in and then deported without no printing. Even place a paper displays the message that says to remove the paper and place it again in the status bar.

  4 visit to a mechanic charges are prohibitive.

  5. help online?

  6 resets useful?

  7 printer is in mode (wi - fi) network

  Hey @Achyut18,

  I understand that you have some problems with the printing of your Deskjet Ink Advantage 3545 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done this document describes How to solve print quality problems with your printer. If after completing the document, you still have problems with print quality, then the cartridge will need to be replaced. Please find below the link to contact HP support.

  It seems that you may have had a problem with collection of paper in the printer. This document explains How to solve problems of choice. If after completing this coument you are still experiencing problems with pulling on the paper then the printer will need to be replaced. Please find below the link to contact HP support.

  If you are looking for other support options, from real cartridges not refilled to replace, or if the printer needs to be replaced so you can contact HP support directly by clicking here and filling out the form below.

  I hope this helps with your problems and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Photosmart 7520e all-in-one pr: 7520e all in one photosmart printer problems

  I just performed a cover of the plant on my windows 7 64 bit desktop, HP Pavilion Elite HPE150F, now I have problems with my printer, I share wireless with my windows 7 and 8.1 HP Envy 700 019-office windows, desktop computers are wired and my office windows 8.1 is not yet connected. The printer is connected to my network and I can connect to e print and everything very well, take all tests passed.

  However I have nowhere on my desk to compose a fax as I did before, even though the fax driver is installed, the only thing I can think to do is to put my printer to the factory settings and start over, but I would like to avoid that if possible, I downloaded the software from the HP web site even if I have the drive , any suggestions please?

  I guess that this printer is not supported by the free E Fax service, but I can't walk up to my printer and send a fax using my own phone number, I can't send a fax from my computer as the operator will come on indicating the number you have dialed not in service which is stupid because it's my own phone number. How can I fix this, all fax tests pass, I share the line with my ADSL modem and the other rooms have phones wireless in them with the built-in answering machine but as they turn off when we have a power cut, we have a telephone in this room, I use the phone cord supplied by HP with the printer and the printer has a list of all the incoming calls.

  I rarely fax but it here just in case I ever need, my office is set up by cable but shared between windows 7 and windows 8.1 wirelesss up to what I'm doing wrong.

• Updates from HP Photosmart C4180 all-in-One Printer

  Re: updates

  How download and install HP C4180 all-in-One Windows 7, 64-bit, automatically update?

  The printer works perfectly, made copies, scans and prints.

  Problem is that half of the HP Update message appears saying that "an update is available. I want to download and install it now? "Rest of the message is missing. I want to say a choice of Yes or no. Would appreciate your advice in a few steps if possible, not too technical. Thanks in advance.

  bel88eur

  You can try to download directly from hp.com.

• Photosmart 5520: Photo printing problem

  I've just set up my new printer wireless to my PC and my ipad with no problems.   I just printed photo of

  both using HP photo paper supplied with the printer, but the quality is terrible!  The ink is running in all directions and

  take ages to dry, the colors are facing eachother, what makes the image completely garbled.  I'm not a fool!, I have

  used various brands of printers over the years and found that the installation of ink cartridges is similar regardless of the brand.

  I checked then double that they are clicked in place firmly.  I followed all of the implementation procedures.

  I'm doing something wrong, or should I just try a different type of photo paper?   Printing simple text on A4 is fine.

  Hi @mum50,

  I think you are something! I suspect that the problem is probably related to the book, but it might be better to use the following document to completely solve the problem: the problems of quality Print to the HP Photosmart 5520 e-all-in-one-HP Deskjet Ink Advantage e-all-in-one 5520, Printer series.

  Please let me know the results of your efforts. Thank you!

• F2110 All In One HP: Printer prints blue instead of green

  I have an All In One older printer that worked perfectly for me. I tried to print something last night and every time the green color was susposed to print blue print instead. I replaced the color cartridge and still have blue instead of green. I tried everything I can think but can not get the printer to print in green. The strange thing is that I photocopied a picture with lots of greenery and it printed perfectly green.  Any ideas will be greatly appreciated.

  Hi @andalcam,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a printer all-in-one of HP Deskjet F2110 with computer Windows 10 and green print blue, but the colors are just when you copy. I would like to help with that.

  The fact that it can copy well little indicates that the printer should work. Here is a document of support designed to be used with this problem so you can be sure - colors wrong.

  Then download and run the HP print and Scan Doctor to verify installed software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

• HP Photosmart C6380 all-in-one intermittently print job does not print

  My HP Photosmart C6380 all-in-One has a problem with the print jobs that fail intermittently to print the first time that I send it to the printer.  I can see the print job listed in the queue, but it fails to print.  I might have to send the job once again, twice or 3 times before it will finally print.

  Try to stop and start the print spooler. I will include the instructions below.

  1. click on the start menu.
  2. in the search box, type services.msc and press enter on the keyboard.
  3 scroll to find print spooler.
  4. Select the print spooler in the list.
  5. on the left side of the window, you should see the words stop and restart in blue letters. Click on stop.
  6. now it say start. Click Start.
  7. close the window.

  If this does not work, try to bypass the print spooler. I will include the instructions below.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. make sure that "Print directly to the printer" is checked.
  7. click on apply to save the changes.
  8. click OK to close the window.

  If it still does not work, go back and set the printer to use the spooler again. After that, try to assign the printer to use a different driver. The link below will take you to these instructions. Let me know what happens.

  http://goo.GL/zCk2r

• C4180 all-in-one, bought 2007 - Dungeon error message color cartridge not installedcorrectly

  C4180 all-in-one, bought 2007-Windows XP - color cartridge not installed error message

  correctly. Replacement cartridge, worked well for two weeks, then the message came again many

  times. Removed the color ran only black. Clean the cartridge color (3/4 full) and clean the area inside

  where cartridge inserts, Reinserted. Worked OK for a week, then the message reappeared. While

  week, did not have access cartridges, just be added paper. Using genuine HP cartridges only!

  Looks like the error got stuck in the printer memory.  A hard reset should clear.

  To do a hard reset:

  1. Make sure that the printer is turned on.
  2. Pull out the power cord from the printer.
  3. Pull out the power cord from the wall.
  4. Wait 30 seconds.
  5. Plug everything up and turn on the printer.

  That should clear the error.  Let me know what happens.

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• HP All in One deskjet printer: X HP

  I have my HP all in one Deskjet Printer 3522 programmed to Eprinting from my cell phone wireless. I want to add a second computer to wireless network for Eprinting.  What are the steps to add the second computer.

  I had taken these measures as soon as possible.  As stated earlier I just needed to create the homegroup and get matching password on both computers. Once everything very easy, I determined the steps to follow. Printer works on both computers.

• Suddenly, my 4215 all in one HP printer error message reads "remove and check right cartridge".

  My all-in-one 4215 printer suddenly flashes an error message on the screen saying "remove and check right cartridge"... For what I'm checking, it is unclear. I deleted and reinstalled the cartridge and it seems OK to me... It is not empty, and the last thing that he printed was fine... Help!

  I am betting that the printer or the ink cartridge contacts are dirty. This happens over time. The document below will guide you through cleaning the contacts. Let me know what happens.

  http://goo.GL/9oXc9

• HP Deskjet 2540 all-in-one series printer need all the model compatible ink cartridge

  Need of compatible cartridges for HP Deskjet 2540 all-in-one series printer. Need all the compatible ink cartridge model #' s. hard to find here in Tahiti (Moorea).

  Hello @bubbamoorea,

  Welcome to the HP Forums!

  I understand that you need compatible ink cartridges for the Deskjet 2540. I will do my best to help you. I recommend the continuation of this entire HP document on cartridges. You can go to the website of HP SureSupply here, which shows the compatible ink for your printer cartridge (HP 61 black and tri-color 61).

  You can also buy these cartridges on this Web site. If you have any further questions, please let me know. Have a good night!

• Premium Fax e-All-In-One c410: Premium Fax e-All-In-One c410 printing, copying and scanning problems

  My c410 HP Premium Fax e-all-in-one won't copy (white spell page), only prints in faded gray even when the quality is set to 'best', will only print up and part side of page - excludes the middle of the page and analyze only a portion of the document.  A new black ink cartridge has been installed in a couple of weeks.  Supply levels say the black is full, all the color is 3/4 full and the photo ink is full.  The printer has been idle for a few weeks - I had to restart it returning to work, because he wouldn't (and is often not) respond to print requests.

  Hi @14141,

  I see by your post that the copies are to come in white and black is printing in grayscale. I will definitely do my best to help you.

  Please, try the steps outlined in these documents to see if she will help solve this problem. Do not take into account securities.

  Problems print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e).

  An "Incompatible cartridge ' or 'Ink cartridge problem' message for HP Photosmart Premium Fax e-All-in-One Printer Series (C410)."

  Inkjet printers from HP - "Ox."... «or «C2...» "Error code appears.

  I have also provided a few steps to troubleshoot issues when you try to print from the Mac.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +.

  Then click the Add button.

  You use genuine HP cartridges?
  What are the ink levels?

  Let me know the results of the Diagnostic print quality report?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• ENVY5530 e-all-in-one: still some problems with my printer ENVY5530

  My ENVY5530 at the age of one month all the in a has problems.  Firstly, it has not feed paper, then a HP Tec, I help and then it worked fine for a few weeks.   Later, same problem returned, paper does not feed, and now, I still have a new problem.  The document is printed, but the top is folded and torn.   However, from time to time, once a page prints perfectly and I am hopeful, but then the mistakes to come immediately.  I reinstalled, but the book looks always up before it feeds through. It is as if it is to be caught by something while it passes through.  Now of course the store (Best Buy) not exchange it because I went over the allocated period of 15 days.  Of course, I thought it was working fine up until 15 days have expired.  The most irritating thing is well, I can't count on it, what problem there at that time?  Maybe tomorrow it will work perfectly again.  Y at - it something I am doing wrong?  Has anyone else encountered this problem with the top of the paper coming out mutilated?  If I can't understand this point I'll have to return under warranty, HP will repair or send me a replacement.  But I would rather by this argument.  Thank you

  Hi Laylac,

  Thank you for your answer!

  I am pleased that the solution is an easy solution for you!

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

  "Please click the Thumbs up icon below to thank me for having responded."