C50-A-1 display - no boot - satellite keep staying black

Similar Questions

• Re: Satellite A200-1AX - black and delay image display

  My Satellite A200-1AX is 3 weeks old and its LCD screen has been replaced by Toshiba Center here, to the Kuwait due to defects.
  After placing the new LCD screen I notice that whenever I'm turning on and off the device, a black picture delay appears slowly and disapperaing.

  Can you please tell me if this is normal in appearance as the technician in the Toshiba Service Center told me?

  is there a problem with the installation of the new LCD?
  I find this thing as an abnormal display when booting and the shutdown of Unity State.

  Hope that give you sometimes meet me and best regards.

  Hello

  It very difficult to understand how this question is similar to s

  But to be honest I didn't noticed any delay return image on my laptop
  If I boot the laptop, the Toshiba start screen appears and then after several seconds the notebook starts the Windows operating system. The screen immediately goes from black to blue (windows form). The same phenomenon occurs during the closing procedure

  This issue is perhaps something to do with the first replacement of the screen, but this is just a suggestion

• Satellite A200-1CR - black screen and no boot

  Model:
  Toshiba Satellite A200-1CR

  Question:
  By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
  No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.

  I have already (without success) tried:
  -Unlock the tray, insert the rescue CD and power on
  -Remove the main battery and power on with AC adapter only
  -Insert a bootable USB stick/external HARD drive

  The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).

  What could be wrong?
  Thank you.

  > By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black

  Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
  You can try to check the RAM modules.
  Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m

• New display driver for Satellite L755D necessary

  Hello

  What is the next round of pilots who come out to the ati display driver?
  Satellite L755D - APU A6 - 3400M 12th with HD6520G

  Unfortuately this forum user - anyone can answer your question.
  From time to time check toshiba download page to see if the new driver will be available.

  Good luck

• Where can I find display driver for satellite A200 Windows XP 32-bit PCAECE

  Where can I find display driver for satellite A200 Windows XP 32-bit PCAECE? Help!

  Hello

  Most of the A200 series made use of this video card chipset.

  [Intel (r) Graphics Media Accelerator Drive X 3100 | http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1670 732xml & sliceId = & dialogid = 57594450 & stateId = 1% 200% 20 57598302]

  Hope this will help :)

• Need to know the model of display driver for Satellite Pro A10

  Hello! I'll try to find the exact display on my satellite pro A10 chipset model. The driver on the toshiba site is not updated, and I can't use the correct resolution (19 "Wide or 1440 x 900) on my external display.
  At the same time before I was able to update the driver correctly, just the search for generic driver "Intel 82852/82855 GM/GME" and software "extreme graphics" at the Intel Web site.
  But now, on the Intel site that they ask the exact model, which means that, if she is 82852 or 82855, and if it is GM or GME...
  Can U give the specific model please?
  My computer is a celeron 2500 MHz with 1 GB RAM and 30 GB HARD drive (standard)

  Thanks in advance...

  I found some details on this device and it seems that the laptop was equipped with the internal graphics controller Intel 852GM; code name: Montara GML

• My Satellite keeps overheating and turning off

  My laptop satellite keeps overheating and stopping when doing hard CPU work. The thing is if I open power management and keep the reset of the method of cooling performance max speed up the fan and it cools.

  It does not seem to adjust the speed of the fan if left only you I have to keep changing it and in a minute or two, it slows down again and then have to change once again at the speed of the fan to the top.

  No idea why this is happening and how to fix it? Grateful for any help. Thank you arran

  Hello

  In my opinion your laptop should be cleaned in professional way. I put t know why you n t mention which model of laptop you have, but I know that some models are not easy to clean because of construction and must be dismantled.

• Satellite A660 boots up to the black screen with blinking cursor not upper left

  My new Satellite A660-10W sometimes (not always), when turned on, boots up to a black screen with a flashing cursor in the top left. If I stop by pressing the power button, it stops immediately. I then wait a few seconds and press the power button again and then it usually starts very well.

  Could it be updated during this process and I'll be more patient (usually wait a few minutes) before shutting down when this happens?

  Usually something like that shouldn't happen. Satellite A660 is no different from all the other models and OS must be loaded shortly after Toshiba welcome screen appears.
  Do you use your laptop with factory settings or you have changed something?

• WXP need display driver for Satellite P200 (PSPB6)

  Hello

  I can't find the display driver for Satellite P200 (PSPB6)!
  I have installed Windows XP Home edition, downloaded all the drivers, but why is there no display driver for Windows XP Home edition?

  Can someone help me with the problem? I googled for hours.

  Obnoxious

  ATI driver display for your Satellite P200 (PSPB6) you can find HERE

• Satellite P100-324 - black screen

  Well, I have a pretty serious problem, I wonder if some of you never experienced anything similar.

  My screen is black all the time.
  I hear sounds of loading windows and others, everything seems to work fine, but I don't see anything.
  What is a screen problem or rather gfx?

  Any suggestions or advice would be appreciated.

  Hello

  Maybe the display has been switched to the external monitor?
  Have you checked if something would be available on the second monitor?
  To do this

  You can also try to use FN + F5 option to toggle between external monitor and laptop computer s

  It could also be a faulty laptop screen this could be the case if something could not be visible on the external monitor, but the internal display would stay black

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• screen keeps flickering black

  screen keeps flickering black. How to fix? It's on a gaming computer.

  Nevermind, it is stopped

• Display > show rules only show empty black top and sidebar

  I have an AE CC project with many pre comps and want to use leaders to align layers and dragging the thin guide. However, as soon as I click on display - display rules, it shows a high black void and sidebar rather than units of the rule should have been. When I drag him, nothing happens.

  I have search the forum and the internet, but did not find a similar question. I checked my settings again.

  Any help would be appreciated. It's really frustrating to work without rules.

  Thank you in advance.

  Amanda

  I see. whenever I see this type of Visual anomalies, I suspect a corrupted preferences or GPU Driver file. We will see about that:

  1 reset your preferences: Ctrl / Cmd + Alt + Maj + launch of the app you will be presented with a dialog box to reset your preferences: click OK

  2. update your GPU driver

• Download previous versions of Premiere Pro? The most recent one doesn't work on my computer. The screen keeps flashing black and white.

  Download previous versions of Premiere Pro? The most recent one doesn't work on my computer. The screen keeps flashing black and white.

  Hello

  You can see the following link to find out how to download a previous version of creative cloud apps.

  Download and install Adobe Creative Cloud apps

• The program monitor keeps going black in first Pro CC

  PC - first Pro CC - AMD Fire Pro (13.101 - 130604 a - 158071E - ATI)

  I'm working on a project and the program monitor keeps going black in first Pro CC while I'm working on the script. I got like 28 GB of memory granted to the program and update the latest version of the driver for my graphics card. No idea why this continues to happen, but the only way I can get around it is to reboot. When I go to close the program hangs and I have to stop it in system preferences.

  Under a crazy period if you can help? Thank you

  Hi Jonathan,.

  We have not seen a response from you because you have created this thread. Please let us know if you have solved the problem completely. For others on this thread, a few things were useful to solve the problem of 'black screen '.

  1. If your computer is underpowered and outdated (especially your CPU and GPU), he will expose the problem of 'black screen '. Consider upgrading your components or by switching to a newer computer.
  2. If your computer is newer and has components that are well within spec (core i7, 2 + GB VRAM for your GPU, etc) and you get the problem of 'black screen', it is likely to do with your GPU drivers or you have two GPUS and the Control Panel has the GPU badly activated for high quality graphics features. Control Panel for your GPU is probably pointing to the GPU to lower power of two.
     • Note that even if you have a considerably amplified GPU, it may be an old one that does not support drivers for a new version of OS X or Windows
  3. The GPU is problematic, in general. Choose file > project settings > general and set the converter to Mercury Playback Engine Software only
  4. Avoid the update to OS X 10.11

  Other workaround solutions include:

  1. Open the reference monitor: window > reference monitor
  2. Turn off the track (eyeball) power off, then on again. (Note: this may take a few tries)
  3. If you have already updated to OS X 10.11, OS X update to the current version
  4. Restore previous versions of video drivers video drivers
  5. Rolling back to a previous operating system
  6. Restoration of an earlier version of Premiere Pro

  I will mark this message as the correct answer and will add that other solutions users can have about it. Send me a PM if you think that your solution should be listed.

  Thank you
  Kevin