C7280 flat bed scanner

Similar Questions

• Can an HP Photosmart Premium copy to printing on paper of the flat bed scanner?

  Hello

  Whenever I press the copy on my printer HP Protosmart Premium C410, it will attempt to load to the top of the ADF and won't copy of the flat bed scanner. Is this normal? Can I copy starting from the plateau that I would with books, etc. that does not fit into the ADF.

  Thank you

  Phil

  This is not normal. However, if you have something in the ADF, it takes care of the ADF. He must travel from the glass if ADF is not loaded.

• HP ENVY 4520: Scan more than one page at a time from the flat bed scanner

  Have a HP ENVY 4520 printer all-in-one. It is a flat bed scanner. However, when scanning I can make a page at a time, which saves the page in a separate file. So if I scan 10 pages it saves as 10 separate files.

  How can I scan multiple pages and save them in a single comprehensive document?

  Printing software seems to have an icon that would allow me to do (a photo of a scanner with a document with a + in it). However, it is gray and I can't select it. How to activate this feature for my printer?

  Checked the user guide and can't find any information on how to enable this feature.

  Hello

  Open customer HP scanning software and select the PDF sortcut.

  Check the option Show Scan Prview is enabled and set scanning in 300 DPI or lower resolution.

  Click Scan, the "+" button is now available.

  Shlomi

• After the installation of Windows 8, LaserJet 3390 does not offer the option of flat bed scanner.

  I need to scan pictures of flat bed. Used to have the possibility of doc tray or flat bed before installing Windows 8.

  This product will not drivers available via In - Os, update windows, or using the universal print driver >

  UPD

• Document feeder disabling in order to use the flat bed scanner

  I would like to be able to use the portion of my printer for items too large or too large to fit in the document feeder. I have a Photosmart C309a with my Mac. I'm trying to do my job on the printer not through any software. This feature worked before and I don't know why he stopped. I am trying to 'copy' and reduce a magazine article, but the feeder whirs and whirs, then the message's Original Jam, reload the document etc. There is no paper in the tray, it is on the flat.  Any help is very appreciated.

  I wouldn't give up. So for someone else with the same problem, that's what I did. I "restored by default" and the document feeder does not activate automatically, however, it didn't complete the process 'copy' and print my document off the Board either. It is in an infinite loop, so I had no choice, but to pull the plug. I received the message telling me not to do so, as if I had another choice. I waited a minute or so and plugged back in and I was able to copy, cut and print the document on the scanner.

• Since the feeder fax fails but OK to flat bed. 5610 HP all-in-one

  Hello. I asked this question before. I have a HP Pavillion and OfficeJet 5610, Windows 7. I have updated the software and drivers to work with Windows 7. The fax function always works from the flat bed. It never work if I load the source in the sandbox, even if only the page. I'm puzzled. Anyone have any ideas?

  Thanks for your help!

  Hopken

  Framework of the moderator is to make sure, that there is no personal information in posts.  This includes the last names, phone numbers and serial numbers.  This is done to protect your privacy.

  I did, however, get to see the report.  Try to turn off Mode of Correction of errors (ECM) and change the speed in the middle.  Try to send a fax.  If this does not work, change the speed to slow down and give it a try.

  Phone line the printer is connected directly to a wall outlet (no separator)?

• Flat digital scanner HP Scanjet 3970 needed to win 7 64 bit

  I have a laptop HP Pavilion dv4 with 64-bit Windows 7 operating system.

  I have a scanner flatbed scanjet 3970 I want to connect with the laptop.
  Can anyone help?

  You can try the Vista drivers from HP site

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=UK&prodNameId=298549&TaskID=135&prodTypeId=15179&prodSeriesId=298547&lang=en&cc=UK

• HP Officejet Pro 8600 Plus the Scanner Software

  Hello

  I'm a big fan of HP products.  My last several printers, scanners and computers were all HP.

  I recently bought the HP Officejet Pro 8600 Plus to replace an older machine with similar features (ADF, duplex, etc.).  The previous machine was also an HP printer.

  The problem I encounter is that the software appears to have been downgraded.  The software on my previous machine had the ability to automatically analyze the photos laid on the flat bed scanner in individual jpg.  With the software on this computer, it seems that I need to manually crop each image.  The options for optimization of each picture, eliminating scratches, automatically adjust color, sharpness, etc. are all gone.

  I really miss these features.  I found that I had been using a "basic" version of the software.  I installed the full version and found it a little different, but it still lacks the automatic selection of the image and image tweaks I did this inveterate of.

  Is it possible to recover these options?

  Thank you

  -MrXmas

  What I found there are some good options based on their comments, I'm not sure if they will have all the features you're looking for, but...

  http://goo.GL/Czm1

  http://goo.GL/3KUR

  I would like to know if this is useful!

• HP photosmart 7520: can this scanner duplex printer?

  This Hp Printer photosmart 7520 can scan side 2?

  No, it is a flat bed scanner, you can scan only one side at a time. Possible only 2 sides scan can be 'manual' analyze the first side, return to the page and scan the other side.

• HP Officejet 6600: Horizontal lines when scanning (digital glitch, no debris on scanner)

  Hello, can anyone advise on how to fix the horizontal lines that appear when you use the flat bed scanner (Hp Officejet 6600)?

  This function scan/unit worked well for a year and suddenly breakdowns at each attempt to analyze.  I went through several steps to try to resolve, including zero/restart the printer and the computer.   To clarify, this not a question of debris/ink etc on the bar of the Analyzer or glass; It's a digital bug (see attached image screenshot).

  I can't find many references about it on the HP forums or elsewhere.  If it helps you to offer a response, FYI I use a macbook, which has worked well with this scanner/printer until recently with this problem.  The printer function works fine.  Finally, I just downloaded the latest update from HP for this device through the App Store and it still gives the same error.

  Thank you for your consideration.

  Jamiwa

  @Jamiwa, welcome to the community of HP!

  I certainly hope that I can help you with the unrest sweeping have horizontal lines across your scans to your Officejet 6600, you notice your Mac running Yosemite. To add the steps that you have already tried, here are some of my suggestions for you.

  Try these steps in the following order:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click here to download and install the full function driver: 6600 Officejet HP e-All-in-One Printer series - H711 Full Feature Software and Driver
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers
  6. Try to scan the image

  Also try to make a copy of the front of the printer to see if they also show the flaws.

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  I hope to hear the result! If you wish to testify of my help, click on the "thumbs up" below!

  

• Scanner install problems - Windows 7 (64-bit)

  Recently upgraded to Windows 7 (64-bit) and everything was fine until I tried to replace my flat bed scanner and are now trying to get two scanners work. First scan was listed (as was the second on the compatibility Web site) Scanner Canon CanoScan LiDE200 USB. Went on Canon's site and downloaded the Win 7 scanner software and installed (after removing the previous version). Tried running the software and got a message "memory" and has been unable to act. Went to 'devices' and 'right click' the scanner and was able to scan using the windows software, so scan worked. Original printer took over and bought an Epson v30 scanner, same problem, installed new software (Epson Scan 3.04). Doulble click on the shortcut of Epson Scan, but nothing happens.
  A scanner does not and I think it's the materials, but both makes me think it might be something else, please notify

  If Irfanview doesn't mean that you are 'Twain' drivers are the problem.

  I have a Windows XP roceedure that usually fixes this kind of problem, but have yet to try it on Windows 7. I posted it below in case you are interested, but go forward with caustion. Note that some of the steps/information I already posted, but I'll post the procedure in his entirerty.

  ---------------------

  If you connected the printer multifunction/scanner to your PC and then
  installed the printer drivers/software, the chances are very high
  the printer can operate but function scanner will not.

  Most scanners or printers of multi use require
  that you install the software before connecting the scanner or printer/scanner.

  Step by step instructions:
  (1) unplug the MFP or scanner.
  (2) uninstall the printer/scanner software and two pilots to help
  the Add/Remove Programs option.
  (3) look/search folders associated with your printer/scanner model
  contains "Twain" files, if the files still exist after uninstalling.
  Delete these files and related files.

  Note: In the list of files that is found you can ignore everything
  files listed in:
  C:\Windows
  C:\Windows\system32\...
  C:\Windows\ServicePackFiles\...

  NOTE: In the C:\WINDOWS\twain_32 folder: you have
  one or more files. The one of "do not delete" is called: wiatwain.ds
  (wiatwain.ds is installed by Windows XP)
  All files in this folder were likely created when you
  installed the printer/scanner. Check each of the files 'Properties' and if has the
  brand of your scanner (Epson, Canon, HP, etc.), identified as the
  company/brand, these files can be deleted safely.

  On my PC I have my scanner HP twain file located in:
  C:\Program Hewlett-Packard\Precisionscan Pro 3.1\TwainCtrl.ocx
  There should be something similar on your PC, so in my case at least
  I would like to uninstall the software of Scanner HP and if it ' file TwainCtrl.ocx
  is still there after you have uninstalled the scanner software I would delete it.
  I have also a second that the file named "Twain_32.dll" TWAIN located:
  C:\Program Files\Adaptec\Easy CD Creator 5\PhotoRelay

  (4) check the Device Manager and remove all the entries if necessary.
  (5) create a Restore Point
  (6) analysis the registry using the name of brand/make of the scanner as a keyword for
  image search. (Remove all entries are, but make sure it's a connected scanner entry)
  7-restart the PC and check once more the Device Manager.
  It should not show any announces the printer/scanner.
  (8) now reinstall the software and two pilots.
  (9) shut down the PC.
  (10) the PC power turned off, connect the printer/scanner, then
  restart / Windows startup.

  Note: Sometimes there might help you try a different USB port if you
  printer/scanner is a USB device.

  An easy way to test your installation of the twain driver software work, s
  is to use a graphical editor named IrfanView.
  http://www.IrfanView.com/

  If you download, install and run this software,
  located in the menu bar is an option named "file".
  By selecting the 'File' option, you should find a
  (near the bottom of the list) option for named:
  'Select the TWAIN Source', click this option
  and then a popup should display valid Twain sources
  for scanner you. If you see your scanner from the list,
  Select it, and then try to scan an object (picture).

  By selecting the Twain Source in the file menu IrfanView should load
  your scanner software and then scan.

  If you choose the option "Copy Shop" also in the file menu you have the
  possibility to bypass your scanner software and directly scan a photo in
  IrfanView. Try the option "Copy Shop" and let me know what happens.
  Note that "Copy Shop" list of your Photo editing/scanning scanner
  software and hardware name (make and model) of your scanner when
  you click on the button "Select Twain Source" of the photocopy shop.
  You should choose the scanner hardware option.

  For example, on my PC the software Photo retouching/scanner is named:
  «HP Precisionscan Pro 3.1 "»
  The second entry "Twain list select the Source" Copy Shop is my scanner
  brand / model that shows that:
  "WIA-HP Scanjet 5470 C 1.0"

  So for me when you use Copy Shop, I select the second entry when
  prompt to select the Twain Source.
  I then check the 'Twain with the preview.
  (I mark this option if the scanned image does not directly)
  to the printer, but on the contrary is displayed in IrfanView).
  Then I click on the button 'start' location has the lower part of the photocopy shop
  window to start the search.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• PSE10 - Possible to crop multiple images from a scanner?

  I take the task of digitization of hundreds of old photos.  Currently, using my flat bed scanner, browse 4 photos at once.  Then, I use editor PSE10 digitized 'Divide the Photo' tool to divide the images in 4 different files.  However, sometimes, this tool does not correctly recognize all 4 pictures and I have to crop manually.  This can be tedious to harvest, saving reopen the old file, crop,... and this 4 times.  Is there a way to select multiple images of the harvest of a file and export each into a new file?

  All advice is appreciated on my tedious task.

  I hear by scanning of a group, the Group of images that you have scanned before using divide scanned Photos to separate into individual images. Once you have, it's like any other image that PSE is concerned - you can crop manually the individual pictures so do not divide scanned Photos. But DSP is the only group of command available to post-secondary studies. You can check your scanner driver. PSE was one of the first programs with this feature, but nowadays many scanners can also do and sometimes better than PES don't.

• LaserJet 1536dnf error 79

  I'm in trouble with my 8-Butterfly-old LaserJet 1536dnf. Worked fine with my computer Windows XP and Mac OS X up to yesterday, when I tried to send a fax by flat bed scanner (scanner ADF works perfectly)

  When I press the button on the Fax, the printer prompt if the document is on "glass", I confirm, start creshes scanner and printer. All the lights start flashing and displays "error 79, restart printer. After a few seconds of printer restarts.

  Also, I unplugged the power cord and plugged into the Jack at the end of a few minutes...

  Print and scan using Windows does not always work, but my favorite software is on my Mac.

  With my Mac OS X computer, one feature of printing now works fine, scanning software can't find any device with Hello (all services are enabled on my printer!). I downloaded the last software OS X from HP.com, uninstalling the old drivers and the software, installed a new... but the scanner and the HP Utility software does not always work correctly.

  I also do a "reset" on the main parameters in the menu of the printer, but nothing has changed (lost network configuration and fax settings).

  Printer runs the latest version of the firmware available on the Web from HP.com site. I've never had no problems during the update process.

  Do you think that my printer needs to be repaired?

  In this period I need really the printer and a scanner for my important documents.

  

  Called technical support.

  Turn off the device, then:

  -Press x and > at the same time (hold)

  -turn on the printer

  -Press and hold both buttons and wait for the message "restore" on the screen

  -wait, wait... When you have finished starting printer new

• OfficeJet Pro 8500 A909a, 2 1/2 years. Windows XP sp3. White vertical stripes

  Vertical white middle band images of scanned documents. It was working fine an hour ago.

  It seems that it is a hardware problem. I was initially hoping that the problem was with the ADF (the most common probably that I saw normally when paper or foreign objects are blocking the bulb scanner), but because it is not with the ADF, but with the flat bed scanner, it seems that the bulb is out or a Ribbon under the glass does not block the light to do what it is designed to do.

  What I would say, is to call our technical support at the 800-474-6836, they have delivery options for you on similar newer printers that are re-certified HP products at a discount rate.

  WARNING: do not try to take the glass on the unit to change the bulb or move all cables, when the printers are assembled they are in an extremely clean environment (for example, an operating room) to prevent dust from getting inside the printer and cause problems.

• HP Scanjet N8420 - paper feed stopped working

  Just out of the blue one day, that my HP Scanjet N8420 has ceased to recognize the document feeder.  I put documents to be analyzed and it is as if she does not yet recognize in there, there is paper.  I push the right buttons to the tray extra paper.  It's just the noise as it does when you use the flat bed scanner and then does nothing.  I've uninstalled and reinstalled the drivers, and that did nothing.  My one year warranty is in place and the online HP chat people do help me no more.  Can you help me?

  adminkim01,

  Here is some information on the manual which can be useful.

  The ADF cover cannot be locked. Open the ADF cover and then close it by pressing firmly.
  
  A problem with the hardware ADF may exist. Use the following procedures to test the ADF:

  • Unplug the USB cable and the power cable from the scanner. Check that the power cable is still connected to the power source.
  • Make sure that the cable is connected to the accessory port scan and that the ADF has at least two pieces of paper in the input tray.
  • Reconnect the power cable to the scanner and then turn on the scanner.
  • Try to scan another page through the ADF.
  • If the ADF doesn't feed paper, contact HP customer care.