C850-1 kN - troubled satellite factory reset

Similar Questions

• Satellite L450D - reset in the factory installation

  Hi guys, tried a factory reset and the laptop turned off itself to half way through, and I can't return it to all the. The laptop is a Toshiba Satellite L450D-11w and it was under windows 7. When I try to load it up I get the message bootmgr lack press ctrl alt del to restart.

  Tried to get into the bios and start but do not have much options just hd and cd drive not working. I also turned off and tried holding zero to load once warned a friend told me should appear, without success. When I go to boot the drive configuration only options I have are toshiba mk3263gsx-(s2) or tsstcorp cdvdw ts-l633c-(s4). I have no idea what to do from here after trying a few options, would be really grateful for the help.

  Thank you
  Damien

  Hello, Damien

  It's that the recovery image installation can not be interrupted. If this happens there is big problem because it cannot be continued and also you are not able to start from the beginning.
  HARD drive recovery facility is ruined with other words.

  Now, all you can do is to install the recovery image using the installation of recovery disc.
  I m afraid you didn't create one, right?

• Satellite L750-115 and Factory Reset

  Hello, I watch/read thousand video's / forums on how to factory reset in the Toshiba Satellite L750-115. Everywhere I found that "press 0 during startup. But it didn't work for me. When I try to get help from the toshiba Web site, I can still get my cell phone.

  If anyone can help me, it will be very nice...

  In General, you have two options:
  You would use HARD drive recovery option to recover the computer laptop back to settings factory, or you must use the recovery Toshiba (disk or USB) media which must be created using the Toshiba recovery media creator software.

  But this means of communication should be established as long as the laptop works properly...

  Have you created this support in the past?
  If this isn't the case, you can use the option of recovery of HARD drive, BUT ONLY if the HARD drive and partitions are not affected!

  I guess that Windows 7 is pre-installed on your laptop.
  Well, in this case power unit, then press F8
  Then you should get the advanced boot menu... Choose here: fix my computer...
  Then Toshiba HDD recovery.

  If this is not possible, drive HARD recovery is not possible and the only way of recovering the laptop is the use of the recovery disk...
  As mentioned, if you do not have the disk, you can try ordering this support here:
  http://backupmedia.Toshiba.EU/

• Satellite C855 - windows factory reset

  My wife bought me this laptop toshiba Satellite C855 for Christmas last year and it came with windows 8, but Icouldnt do for windows 7 ultimate had instead put, but my son has been so screwed up then that Ive been working away while I would do a factory reset and how would that work

  Disk recovery or recovery Flash Media key appeared in the past by using the preinstalled software called Recovery Media Creator described and mentioned in the user manual as?
  Isn't it?

  That s no good guy.
  In this case, you can simply follow the advice coming from Ilay.
  You wish to order this disc of the Arvato. Link above.

• Cannot perform factory reset to Satellite L650

  Hi team, support

  Hope you will be well :)
  I have some problems and hope that you will help me solve them. Here is the description of my problem:
  I have a Toshiba Satellite L650 - 17R laptop computer I want to reset to the factory settings. I used the following instructions to do that (http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm), but when I'm in pressing the F8 key when starting laptop it appears a list of choices on the display that does not contain 'Repair your computer' or "??" or something like that. The first entry in this list is 'Safe Mode', second is 'Safe Mode with Networking' and so on. Also, I tried the other method described in many places in the internet, which is to press 0 and the whole power button when you turn on the laptop. In this case again, he starts to do things as described in the instructions (example here http://www.youtube.com/watch?v=I5dEOm1EJBw): it beeps, then when I let go of the 0 key, it prints "starting Windows" and shows the Windows logo, after that it goes to market as always and no other dialog boxes appear.

  Issues related to the:
  Is there another way to do the factory reset?
  I have doubts that the "Toshiba HDD recovery" tool of my laptop is corrupted, so is it possible to download this tool on the internet, on dvd disc and install from there? If so, then can you please give me a link of this tool for my model?

  Best regards
  Mihran grabbed.

  Hello Mihran and welcome in the Toshiba forum

  Let's see what's not there.
  First some general info. Each new Toshiba notebook is preinstalled with original recovery image. This image is also saved on the HARD disk on a separate partition. With the factory settings repair my computer option will appear in the advanced start-up (F8 at startup) and HARD drive recovery option can be made as described in Toshiba document you posted in your first assignment. If nothing is changed, this option will be there and you will be able to do the installation of HARD drive recovery again ad again.
  > when I'm in pressing the F8 key when starting laptop it appears a list of choices on the display that does not contain "repair your computer".
  This occurs if you have installed the version of the OS using the Microsoft installation disc. After having this option to fix my computer will disappear, and you will not be able to start the installation of HARD drive recovery.
  > Is there another way to do the factory reset?
  Yes. You must use the disk for the installation of the OS restore DVD. After that it all will be the same. Repair my computer option will be available again and you won't be havce factory again.

  If you have any other questions you are welcome.

• How to get factory reset disks for Satellite Pro L40?

  Hi all

  Ive got someone other Toshiba Satellite Pro L40 attempt to fix, it got a virus, and the best way to solve this problem is to do a factory reset, so I copied all the personal files on DVD and went to do a factory reset, but told me that I need the discs...

  But apparently, this laptop was given as a replacement by an insurance company, and no records were provided, then how to to get the disks?

  Thank you
  Angus

  Hello

  Not sure if you will be able to order this disc from this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Sometimes these disks cannot be ordered if the notebook series would be dropped.
  In any case, check out the page and try

  It may be possible to order this disc

• Satellite L750D and factory reset - HDMI still doesn't work do not

  Satellite L750D
  psk361 - 038008
  9b341741w

  My hdmi suddenly stopped working, tried things usual fn + f5 / f8, win + p key, enable / disable lower resolution etc. so decided to factory reset but still pc hdmi does not graphics card.

  tried it on my panasonic usual tv nothing works, tested on samsung tv without result, the pc detects the tv and even sets the audio to my TV but no sound from the tv. tried unplugging tv cable and pc stop feeding and took out the battery for 10 sec, trendy everythign on all together, still does not work.

  I checked the hdmi cables with other devices and work on the two TV - using the shortest cable to test the laptop.
  honestly, I thought that it was a software problem because it can real detects the TV but no picture or sound work, which indicated the hdmi cables, but they work with my ps3.

  so, it is not the cable, not the TV, not the software, hardware maybe? but it detects my TV...?

  so I am really confused here more info please ask first time using the help forum :(

  8mnth old pc, who is sitting on a rail so it is not at all, overheating hdmi worked perfectly since the day I got it, I didn't have any changes when it has stopped working... > _

  any help much appreciated sincerely.

  Hello

  If all goes well he material s no problem, but I m afraid it could be
  I think it might be a hardware problem, because you said that you have already configured the laptop back to factory settings and this has not solved the problem.

  I understand this correctly? You used the recovery disc or HARD drive recovery?
  Is this good?

  What you could do is to check if your BIOS is up to date.
  On the European driver Toshiba page, you will find the latest version of the BIOS.
  Check if you can update the BIOS.
  In addition, I recommend setting the BIOS to default and settings to save the changes.

  At least a graphics card driver might be updated also. Its worth a check however, I m really not sure if this might help you

• Satellite U400 and factory reset

  I'm having a problem regarding my HDD RECOVERY, which is not present in any option when I try to factory reset, no assistants or something...

  Here are some photos of HARD drive recovery, and as you can see the disk RECOVERY file HARD is in E (4 GB).

  http://s1301.Photobucket.com/user/louiemnb/media/1_zps13fda4d4.jpg.html

  Here is the picture of my computer management where you can find my recovery partition... uh when I try the F12 thing, there was recovery options the other 2 HARD drive but when I click on the HARD drive option, his does not.

  http://s1301.Photobucket.com/user/louiemnb/media/2_zps593ec16a.jpg.html

  Hello

  On this older machine there is not some sort of recovery partition. Recovery image is recorded on the second partition of HARD drive in the folder called HDDRecovery.
  Recovery image installation can be started as described on-
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Start your laptop using F8. S repair your computer option available or not?

• Satellite T130 - 11 H Factory Reset - problems later

  I factory reset my Toshiba laptop and now I have problems.

  When I start the laptop I constantly get the message "prepare your pc for first use" and it starts, Toshiba menu starts too and keeps telling me it's to complete the installation.

  Randomly, he finished and restarts, boots up to the same problem.
  I tried to reinstall via usb as disk media.

  It s really strange.
  Do you use an installation of recovery for the first time?

  The value of the default BIOS and try again. You can also try to format the whole HARD disk before starting the installation of recovery using your USB key.

• How to start the factory reset on the Qosmio F50-125?

  I'm going to get in trouble with resetting factory my laptop. I google and answers most needed to press 0 in starting up, but it does not, the leptop occurs just with commissioning.

  How to really factory reset this model? (I do not have any backup) + I would like to reinstall windows.

  best regards and thanks for the help at the front

  Hello

  I don't know why you're wasting your time Googling autour. Everything is described in s operating manuals. If you download the user s manuals document and check the 66 page, you will find an exact description how do.

  Please check the instructions and try to start the installation of HARD drive recovery.
  By the way: you have created recovery DVD media?

  If you still have questions, feel free to ask.

  Good luck

• Lenovo G50 factory reset - 80 questions

  I have a laptop G50-80, which has been upgraded to Win10 quite earlier. Recently he started having trouble with hardware and software that worked no longer works. I decided to use the reset option factory to return the system to Win8.1.

  Before doing so I downloaded the more critical of my files from the user to a Cloud Computing service and created a recovery image of windows on a SSD connecterd external via USB. I also created a system restore CD.

  Once I felt, it was safe, I pushed the button and started the factory reset. It has worked flawlessly, the system came in Win8.1. However, the files that I had uploaded to the cloud is not fully spread, and I needed to restore the image of Win10 to get back them.

  After several attempts to get the Win10 upgraded to work, I finally got to Win10 boot and restore the image of the SSD system. I found the files and was more securely save for later access. Now, I had to perform a factory reset more to return the system to Win8.1. But operations to do so led to restart the system for the installation of Win8.1. He was not able to start the factory reset.

  Some reading on the internet indicates that if the HD partitions are written in software other than the Lenovo OneKey tools that any attempt to use the partitions of the factory to do a reset would fail with the symptoms that I saw.

  Using the Win10 disk management tool, I see that there are 6 partitions on my hard drive. They are called "Recovery Partition", "EFI System Partition", "OEM Partition", "C:", "D:", and "recovery Partition". I don't see anything on the first 3 or last one of them. It doesn't seem to be a file system to set up, so I don't know if the data has been preserved.

  Is there something I can do to recover the factory software reset so I can restore this system to Win8.1?

  You may need more information to help. I'll be happy to provide all that you think you have need. Let me know.

  Vince

  I found an answer that seems to work for me. I am currently at 12%, restore the factory settings. Check out the instructions here:

  https://forums.Lenovo.com/T5/Lenovo-beacon-stick-300-D-J-and/Windows-8-recovery-partition-not-recogn...

  After the execution of these instructions, the novo button does not. From the Lenovo OneKey app doesn't. I had to reboot to factory settings using the windows restore utilities. Before running these instructions, the third partition of the provided factory restore option was not available. This time it was and the restoration continues.

  If I don't come back and say otherwise, assume the success!

  Vince (13% now)

• Sony vaio VPCEA45FG laptop can factory reset without cd?

  How I picked my laptop without cd? my laptop has been shortened appealed the virus that make me in trouble, so I need to factory reset my computer...

  CBX_deltax,

  If the recovery partition is still intact you can recovery that the unit back to the factory with the F10or the Assist button.

• HP Stream 13: Wifi disappeared completely, even after factory reset.

  Hello

  We had a trouble that started with the laptop does not not on one day. We managed to turn it on, but now there is no wifi.

  In programs and features I see there is a driver Broadcom "installed" but there is no version and there is no file size. I deleted and tried to reinstall a new driver, but that stops at half way through and doesn't seem to work.

  In device manager there is no sign of a wifi device, it's as if it disappeared completely.

  I tried all types of factory reset, same one that completely resets all doesn't seem to work.

  I have no way to connect the laptop to the internet because there is no Ethernet cable port. So I downloaded the driver on a memory stick from another computer and it stuck in the said laptop - no joy.

  Any help would be appreciated.

  Thank you

  Bradley

  @Bradley12345,

  Hello and thanks for the display on the HP support forums.  If you wifi does not appear in Device Manager, that this means that the map does not work or is not connected properly.

  Here is a link to the manual for maintenance of your system.

  HP PC laptop stream 13

  You can use this to see if you can access the wifi card to make sure it is placed correctly.

  If you are not able to do this you want to contact the HP support by phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks again for posting and have a great day.

• What * exactly *, did a factory reset?

  My Thinkpad T430, less than a year, is having issues - corrupted .dll files, Windows Update does not, all kinds of fun stuff. I'm waiting on someone to e-mail me own copy of the dll I need BUT I'm worried that this will not solve everything, especially for problems with Windows Update. I've exhausted almost every other option that I can find to try to fix it at this point. The nuclear option is a reset to Lenovo factory settings from the windows repair environment accessed by pressing F8 during startup, but before I do I want to know * exactly * what I would do to my computer.

  Specifically: will be reset back factory all files Windows system to their original state, which means that there is no chance that will persist the issues that I am? It will guarantee that Windows Update works again and all my .dll and other system files will be in a State of charge and not corrupted? The process replaces the current system files with the original versions that have been installed on the computer?

  I want to restore factory settings and find that Windows Update still does not work, and now I have to install more than one year of updates manually from the Microsoft Web site, one by one, or go through the trouble of having to reinstall all my programs, get my files on the computer, set the parameters in order to be as I would like again etc. only to not have these problems solved.

  Thanks for any help/input.

  Good news; I ended up not having to do a factory reset - I could get good copies of my someone else corrupted .dll files and copy them to my computer fixed most of the problems. Repair installation of the problematic program is solved the rest.

• BlackBerry Smartphone factory reset

  I'm trying to factory reset my BB curve so I can give it to my niece and I can't find how anywhere on it, Please HELP!

  I don't know why you would need register your device and do all these steps you provided previously.

  If your having trouble finding the option just apply a password and enter 10 times incorrectly. That he will wipe away.

  If your device was a BES, I would suggest a factory reset to remove all political. Just open with desktop 6.1 - 7.1 software. Go to help > resources > support tools > factory reset.