calibration
Good day OR wizzards.
Im having a problem with my VI, which I use to receive signals from an AMTI force plate,
Im getting an error message that is shown in the attatched screenshot.
I'm a total noob to Labview, my idea is that theres a problem with the startup task action, being in the same loop, etc, but unfortunately, I have no idea, for the solution of
This problem.
Basically what im trying to do is to calibrate (scale) the forceplate in the real VI channels, so that the user and make calibration with out having to go to MAX
Thank you
Dallaire
Hi Dallaire,
Yes, I just noticed you have VI DAQmx start task inside a loop For. That's why you have this error, basically, you started the task, then the iteration next you try to start it again (without stopping the first task). My suggestion is to move the DAQmx stop task VI in the loop For (little thrifty) or move the VI task DAQmx begin (front) outside of the loop (more effective and recommended).
Do you need your VI to run the configuration of the scale at each iteration thus? If not, then put all of you outside of the loop For so (before the DAQmx starting VI task of course), this will make your much more effective VI.
Thanks, I'm very happy here
I hope this helps.
Tags: NI Hardware
Similar Questions
-
The compass is out of 90 degrees. Is there a software patch or calibration for this?
The compass is out of 90 degrees. Is there a software patch or calibration for this?
See section reset or disable location Services of privacy and location in 8 and later - Apple iOS Support Services. Back to zero must recalibrate the compass.
TT2
-
Calibration of logical keybaord
Hello! I tune my guitar to 432 Hz. I was wondering if there was a way to change the logical setting/calibration of the on-screen keyboard / musical typing to match. Thank you!
Yes:
-
The monitor HP 2207 color calibration
The color on my screen calibration option doesn't seem to work on this monitor. How others have calibrated their monitor so that the printed photos corresponding to the image on the screen. I've been watching Spyder and Eyeone calibration thingys but she tips appreciated. Thank you.
This article from hp can help:
http://support.HP.com/us-en/document/c00850059
Maybe try to install the latest versions of software and drivers:
Maybe your manuals for this information?
You may need to update your video driver PC?
-
I'm trying to calibrate a NEC monitor that is attached to my iMac end of 2014 El Capitan (10,11.4) running, the calibrator (Spectraview) is a dedicated to the NEC calibrator. Unfortunately, I can't get Spectraview to recognize the NEC monitor. Any suggestions?
I looked on the NEC site and haven't seen El Capitan compatibilities listed.
http://www.necdisplay.com/support-and-services/Spectra-view-II/compatibility#Mac h_os
You should contact the support of NEC.
-
Satellite A505-S6005: creating recovery discs power calibration error
Hello
just bought a satellite A505-S6005 and try to create recovery discs.
I am using Dynex DVD - R.He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.
The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.
Any help appreciated.
Thank you.Hello
I think it's a problem with your DVD media
You are using incompatible disks!Try different DVD from different manufacturers.
I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.Check it! I'm sure this will help you!
-
Calibration of the monitor on the Satellite L755-18Z
Hello world
Here's a question:
My screen is very bright.
In NVIDIA Control Panel, I have 2 choices:
1. other applications control color settings
2 use the NVIDIA settingsIf I choose nr. 2 - everything works well until the next reboot - ' other applications (I guess Windows OS) "takes over - monitor is very bright once again, and I need to go to the NVIDIA Control Panel and apply 'use NVIDIA settings' again. (However, the brand remains in option 2, and I have to mark opt. 1, then mark opt. 2 again and press the "Apply" button). Everything is a bit irritating.
Someone knows what to do in this situation?
Hello
Check out this Microsoft page on the color management settings
http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settingsVery interesting the calibration of the screen part where you can find a step by step instruction how to enable disable calibration loading Windows.
It seems that the standard calibration of Windows crushes the nVidia settings and in my opinion, this could be resolved by disabling the Windows calibration.
-
HP Designjet T3500 printer: Printer - scanner calibration target T3500 is not accepted
We need to calibrate the Analyzer (rolls and glasses are empty) our T3500 printer, but the calibration target is not accepted (calibration target is not valid), we tried in user (maintaining the image quality) and also in service (service utilities - validation scan) mode, but in both cases, the target of calibration is rejected. Same calibration target has been used for calibration of the T2300 scanner without problem.
T3500 has the latest fw. installed.
Please advice if you have experience with this problem, thank you.
Hello
Finally, the problem is solved by the black pencil..., there is a box of identification (such as a bar code) on the upper right corner of the calibration sheet, even if it has been used to sentence, but some places on this label were dead black and we have improved in pen and now the target is accepted and calibration is successfully completed.
Thanks for your time and your suggestions.
-
HP DreamColor Z27x: Calibration HP Dreamcolor Z27x - guides
Hello
The User Guide Dreamcolor_Z27x.pdf, page52 under "Introduction to Color Calibration.
says:
"
A detailed discussion of the calibration is covered in the
HP DreamColor Z27x Advanced User Guide"
This guide seems to be hidden quite well.
Then, on page Z27x, there is a link to:
"Best Practices for the HP DreamColor Z27x Studio Professional screen calibration"
However, only one results in a 404 error.
where to find these books?
Thank you
=
Try this.
REO
-
Satellite L500 - reset color calibration
HI -.
I've only had my L500 Satellite during the week. I have a problem with the images on the laptop with a blue cast. I calibrated color and get perfect only so he can reset when the computer is turned off and restarted. Tried several times without success.
Can anyone help?
Hey,.
Can you tell me where you have changed the colors exactly, please?
Normally, you can change the colors in the options of the display driver. After that, you will need to save the new settings and save them as new profile.
Check this box!
-
SPM30 - problem with error of Mat * un UJ820S power calibration
I can't possibly solve the problem of CD/DVD writing. There is always a "power calibration error". I reinstall and it did not help. I also have ttried this solution with changing to "PIO" mode only and it did not help.
It is almost new for laptop. Is there a solution to this problem, or only the authorized service provider is a solution?Hey there,
When you get this error message? and what application you use to burn CDs?
If there is no solution and it is almost new for laptop, you should contact the Service partner. I'm sure they can check the dive. -
End of 2015 iMac 5K Calibration of the retina
Hello. I have an iMac end of 2015 with the retina from 5K to the address 27. I do a lot of photography and want to calibrate the screen. Unfortunately, the calibration in the system preferences window gives me no option to set the display, other than the white point and the brightness. No point buying a third device of calibration of the party if I can't make actual adjustments to the screen.
Am I missing something here? Or is it pretty well "our color is the right color" Apple? It seems to me that I had more control on other views of Mac in the past...
Hello!
It is hidden. Please press option while clicking on calibrate and you're done
Let me know.
-
OfficeJet Pro X 476: OfficeJet Pro X476dw - calibration 0% after an hour and a half
Hi all
today I bought new OfficeJet Pro X 476 DW and the calibration procedure is always 0% after an hour and a half...
I have inserted all the white, connect to my network like he said it in the installation guide that I can't...
any ideas? Can I reset procedure?
NACE Hey!
I just pulled the power of mine and plugged back in a page came out right away and now it's 15% and moving upward...
-
Power calibration error - Mat * a UJ - 830 s drive Satellite M45
Hello!
I have a problem writing files on my carpet * a writer uj-830 s. My laptop is Satellite M45. When I try to burn a CD or DVD in nore or dla, it gives the power calibration error.
I'm sick and tired of this!
Can someone help me please?Hello
Power calibration error is known to me and revealer of truth he s just doesn't sound right.
For the most part, this message appears if the lens of the player is unable to calibrate in the right position.The goal must always be calibrated before you start read or write the middle.
If this procedure fails, the drive is not able to manage the CD or DVD and get the power calibration error.Frankly, in most cases, the drive needs to be replaced, because AFAIK this dysfunction is not repairable.
-
M30-842: error of calibration of power when burning DVD - RW
I have a problem with my M30-842. Several times I tried to remove burned on my laptop DVD - RW and Nero would say that "the burn process has failed. Power calibration error ". So, I can't delete or continue multisession DVD - RW.
CD burning is ok.
Please help me with the problem, how can I fix it? SOS!Sperm
Hi sperm
Can you please try to use roxio software built into Windows XP? There is also the same option. It will be interesting to know if this problem is caused by software that you use or if there is a malfunction of your device.
-
Satellite U500-17F - problem of calibration by trying to create the recovery disk
I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.Hello
I had a problem with a different disc from different manufacturers.
Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!Test other brands!
Maybe you are looking for
-
SD-C2502 CD & DVD data does not, movies DVD work OK
Can anyone tell why my drive suddenly not working for reading data, CD or DVD mode, but play dvd movies as if nothing is wrong.I used the system restore disk that he will not read either.OS is XP Professional SP2.
-
Windows XP 64-bit Service Pack 3?
Hey all: I have a Lenovo B570 with 8 GB of DDR3 memory and a processor i3 and I want to put XP on it after I have install my new screen, and I was going to slipstream service pack 3 into an iso and use it, but I can't seem to find an SP3 64-bit exe.
-
My cmputer reports an error Ox004D401. It says something about the licensing issues... hope you can find. Gerd Hansebraten cordially
-
Need to Win7 x 64 Driver for V5 - 552! Can you help me? Thank you
Hi all! I downgraded an Acer Aspire V5-552 of the Win 8 for Win 7. I need all driver for this model. Can you help me? Thank you very much.
-
Computer will refresh not error message displayed is "WindowsUpdate_80240016" "WindowsUpdate_dt000"