Caller ID is not displayed

Similar Questions

• not showing caller ID does not display

  I see that someone else had same problem a year ago that never responded.

  I have an Officejet Pro 8600 more again.  When a fax arrives, the caller ID does not appear on the screen.  It is connected to a single line with caller ID.  Is something wrong with the display? It just says: "Receive faxes", but no caller ID.  The phone line has caller ID

  This has nothing to do with the blocking of unwanted faxes.  I want just the caller ID to show on the screen.

  Thank you!

  Hi jachang, sorry to hear that you have a problem with the caller ID on your printer. A few factors can come into play with the issue you are experiencing. One thing that could happen is that you don't have the number stored in your address book to the printer. If a number is a private number, it will return unknown number on the printer no matter whether or not you have a caller id on your phone line. I suggest that if you have several different numbers fax you who invents it like an unknown number, you take those numbers and record them in your directory of contact on the printer with the names as well so that it is displayed on the printer when these people fax you. If you are positive that the fax number you is NOT a private number and it should appear, then I call your phone company and have them test your configuration of line just in case any problems.

  If you have any other questions, feel free to write again.

  Thank you

• accept the call button is not displayed when phone rings

  If my husband's iPhone more 6s is open on an application or internet etc and a phone call is available in the button I accept does not show, just the name of the appellant at the top of the screen. Can anyone help please?

  Try closing the phone application and force to restart the device. No data is lost when you do this.

  Press the Home button twice quickly. You will see small glimpses of your applications recently used. Swipe to find the app phone shot upward on the overview of the application to close.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• BlackBerry Smartphones caller ID does not display when they call

  Until recently, when someone calls, theirnumber or name does not appear. It only vibrates or playing my ringtone. I tried to turn it works but that did not work and this hadnever happened before so I don't know how to fix it. Any advice? Thank you

  Hi and welcome to the forums!

  No data will be lost when you do the following: remove the battery while the device is activated.

  Remplacer replace after one minute, let the device reboot 1-3 minutes, see if the problem is corrected.

  Thank you

• IPhone 6 does not display the caller of time during the call

  Hi, when I get a call or call someone, my Iphone displays the call only. How can I change to decide the call times?

  Hello ghtung,

  Thank you for using communities Support from Apple. I know that seeing not only the timer for the duration of the phone call on your iPhone, it's not what you expect. Because this is not the expected behavior of the iPhone software, I recommend the following steps to troubleshoot and resolve this problem:

  First, restart the device as the closing down and starting process is important to keep the iOS software works correctly. Then test again the question:

  Restart your iPhone, iPad or iPod touch

  If you are still missing the call timer after reboot, your next step would be to make a backup of your personal data and then reset the setting on your iPhone. Now, don't worry, this will not affect your content. All your contacts, photos, music and other stuff are all safe. What it will do is give your custom to the factory default settings. Background, images, sounds, fingerprints and stuff like that will be set up again. Then test the issue again.

  The backup of your iPhone, iPad and iPod touch
  Import photos and videos from your iPhone, iPad or iPod touch
  Reset the settings of the iPhone - iPhone user Guide

  See you soon!

• BlackBerry Leap Leap - name of caller id not displayed to registered contacts

  Incoming calls to my Blackberry jump do not display the caller ID even if they are stored in contacts. Can someone help with this problem please?

  This problem has resolved on its own!

• Z10 Z10 ILA BlackBerry does not display the name of the caller of the stored contacts.

  My Z10 does not display the names of the callers stored in contacts with a prefix or area code. For example, an incoming call on contact JOHN SMITH, whose number is stored as + 44 7976 667668 shows not her name but just 07976 667668, but if the number of JOHN SMITH has been stored as 07976 667668 (without + 44) then the incoming call appears her name. Does anyone know how to remedy this? or is it a design error / omission by RIM?

  This is a known issue with the software currently.  Please visit KB33685

• The names of blackBerry Smartphones Contact not displayed when calling

  Hello

  New in BB, moved my SIM Nokia in the 8900.

  I have problems with names not displaying not when they call the number is entered differently (depending on whether I'm foreign or in Thailand). Some numbers are saved under the international numbers (+ 66829...) to other entries like (0869...).

  The number is certainly in my BB as + 668612345678, but if they call when I'm in Thailand the number will appear as 0861234567. To get around it, I'll have to get into contact and add an additional number for each contact has + 668612345678 and 0861234567.

  Is anyway to work around this problem?

  It all depends on how you have your game of smart dial.

  It could be one of the three solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.
  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

• BlackBerry Tour 9630 smartphones does not display the name of the caller

  Hello

  I have a Tour 9630, version sw 5.0.0.732.  When the phone rings, it does not display the name of the caller, their telephone number, although this number is in my address book.  Once I answer the call, the name will be displayed.

  Naturally, I would like to know who is the caller before I answer!  :-)

  I found a few messages, ask something similar, although for different model phones.  Some of them suggest that I have to disable protection for the content... but I can't find it in the options.  Even in the User Guide, it contains instructions (go to Options > Security Options > General settings... but there is no "General settings" on my phone.)

  If anyone knows how to solve this problem, I would be very grateful!

  Kind regards

  Options > Security > encryption > include contacts.

  There could be other solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

• iPhone messages do not display the coordinates on the lockscreen

  Ive had this problem fo has for a long time now and not been able to find a solution.

  When I receive a message of some people, the phone does not display the contact information for the message, I just get the number. Its a slightly annoying bug.

  Ive tried the backup phone, wiping and then restore from the backup, but the problem still the problem occurs.

  I tried wiping the phone and from scratch, synchronization with icloud for all my contact information, etc.

  He worked and solved the problem, except that now I don't have one of my old text messages (what I really want to keep as there's several years of conversations evidence it.)

  I found a free software called iBackupbot which allows you to restore a backup file messages and copy them to another and you can then restore your phone to this new modified backup.

  It worked. I now have my restored messages (except the attachments are missing, but I can live with that).

  However, I now have a new problem, when I receive a new message that they are appearing in my list of message completely out of use and not at the top of the list of messages. There seems to be no logic to it, they just pop up as if they were a few months old even if theyre unread.

  I'd really like to find a solution to this problem. I have an Iphone 6 and all the latest software update.

  Thank you

  Jonathan

  Hello

  your problem is a new read does not list according to the order of arrival of messages?

• Why my bookmarks bar will not display its elements

  bookmarks bar is not displayed. by clicking on the button bookmark shows that the items are listed under the toolbar, but tried to uncheck and recheck display toolbar bookmarks, but not joy. They all used to display with the "overflow" listed under an arrow on the side (?)

  If the menu bar is hidden, then press the F10 key or hold down the Alt key to make the call of menu bar.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Open the Customize via "view > toolbars > customize.
  • Make sure the "Bookmarks Toolbar items" are on the personal bar
  • If the "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the toolbar palette in the window the bookmarks toolbar Customize
  • If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
  • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar set up

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_places-database-file

• Vista recovery disks do not display TOSHIBA HDD Recovery option

  Back to school for 4 children with laptops is a pain, he seems to be constantly before wipe them and their establishment again.

  Any ideas why the Vista recovery disks do not display TOSHIBA HARD drive recovery option?

  I made a USB key and copied all the files from a backup of the Recvery drive to it. The USB displays the TOSHIBA HDD Recovery option but calls for the disks and will not run the recovery of the USB itself. It's annoying, but at least I can still use it to recover the machine.

  I would like to be

  the problem with discs

  or

  get the USB key to retrieve by using its own files instead of asking for the disks. Vista was not created with the option to recover from USB, so maybe I can't.

  HARD drive recovery option appears not in the advanced boot menu if something has been changed or modified on the HARD disk and the flag was removed.
  For example, this may be the case if the partition has been changed, modified or if HARD drive recovery files or folder has been changed, moved, or deleted.

  In case you want to recover the computer laptop back to factory settings, you must use the recovery disk

• traded drives a NV + others data is not displayed

  I failed NV + v1 and bought a used one, so I was able to get the data on the hard drives. Swapped the drives from the old to the new. New NV + appears in the finder on my iMac, but is not displayed in RaidAR. I can access via the finder, but none of the files appears. I see is a file called "homes" and none of my old files are visible. Ideas?

  Hi mspetersen,

  Thank you for the information you provided. I have sent you a PM for some instructions.

  Kind regards

  BrianL
  NETGEAR community team

• A5000 contact is not displayed, the number

  After the update to A5000_S124_15118_8G_ROW contact names are not displayed during the call or calls and SMS messages in the journal. It's very annoying. After all, it is a PHONE and I got display calling name 'feature' since the late 90's, long before smart phones...
  Y at - it a fix for this, or maybe someone can tell me how to go back to the previous version that worked?

  Thank you

  There is an additional method to solve your problem! And you don't need to 'Factory reset '!

  All you need is just to save your contacts to SD card, then delete all the contacts and restore it from a backup again...

• NETGEAR genius App does not display the numbers of traffic correctly with IOS 10 meter

  Since I've updated my Air Ipad 2 and Iphone 5 IOS 10.0.1, genius app on these 2 devices does not traffic counters numbers - the numbers are blacked out. Both devices have been updated to IOS 10.0.2 and numbers still are not displayed correctly. I've uninstalled and reinstalled the app on devices engineering and numbers are always blocked. I tried an old Ipad 2 which is not updated for IOS 10 and my desktop Windows 10 PC and the traffic engineering counter displays the numbers correctly. I called Netgear support, but they were not aware of this problem and so far do not have a solution. Someone has encountered this problem on their Apple devices? Thank you! Another question - is - it possible through the genius app for what it tell me the amount of use of band bandwidth/data device not only in total for all devices? Thanks again!

  Hey all

  I have forwarded this to our engineering team.

  There was another user who made the same case.