Calls phone hacker

Similar Questions

• call phone call FETCH?

  Hi all

  How can I reterive phone call phone number? When we press sendKey calls show [missed calls, calls received and placed calls]...

  My requirement is: How can I get stressed the appeal of phone calls?

  Thank you

  Savi

  PhoneCallLog phoneCallLog = (PhoneCallLog) context;
  PhoneCallLogID phoneCallLogID = phoneCallLog.getParticipant ();
  Number of strings = phoneCallLogID.getNumber ();

• IPhone-to-iPad call phone cellular continuity uses the data

  Many times I drive to work using my iPad Mini 4 WiFi + cell phones driving to work to play music of different applications via bluetooth to my car audio system.

  Whenever my phone rings, my iPad has the T-Mobile (my support for iPhone & iPad) also allows cellular continuity. My question is, if I were to answer the call on my iPad I will be charged data or the call still counts against cellular minutes? So, basically the iPad use VoIP (data) or VoLTE (phone calls / minutes) to manage the call? Thanks for any help!

  Updated - talked with my contact at T-Mobile, who is Advisor senior technical/engineering. He said phone calls on iPad via transfer cell/continuity is currently working on Facetime Audio that is essentially a VoIP service and use the cell data.

  However, T-Mobile is looking for ways to eliminate the use of data for its customers on Facetime Audio (and perhaps even Facetime video as well) through their programs free music and frenzy on. If that happens, it would be incredible!

• call phone iphone 5 s problem

  When I get my call, the phone vibrates for 8-9 seconds and I hear nothing. also while making calls, I don't hear anything after my call at the other end. Sometimes, the phone freezes at the call log filtering after making the calls too. I reset the network and phone settings. but the problem persists. What should I do?

  Hello placidsantosh,

  Thank you for using communities of Apple Support. It is my understanding that you are unable to hear through your car radio iPhone when on a call. I can certainly understand your concern. I'm happy to help you.

  You did a great job trying to fix this yourself! The receiver of the iPhone will not work properly if it is blocked or dirty. Please try the following steps to remove the receiver. Test the issue after each step. :

  • Make sure that nothing is blocking the receiver, such as a case or a movie.
    If you have a new iPhone, remove the plastic on the front and the rear of the unit.
  • Check the receiver opening to see if it is blocked or dirty. If necessary, clean the receiver opening with a clean brush, dry, soft.
  • While you're online, turn on the speaker. If you still do not hear, then your network or the reception might be the issue. Try calling again later or somewhere else

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone

  If the problem persists, please follow the steps to test the receiver in the "Check the receiver" section in the link above.

  Have an amazing day.

• Android, iPhone does not work (calls phone mode only)

  I just Android where I got a simple application/widget for calls only mode for the night because I need to

  Keep the emergency of grandparents and a few other numbers.

  You just put it up, choose the contacts to include, and it was a simple pressure on the widget at bedtime.

  They said iPhone isn't a similar option? How is that possible?

  I think that you have only Favorites call with no other notifications (can someone clarify?) but I also

  of many favorites for this as a viable option for me.

  Someone said also you can plug headphones during the night and it must allow that phone calls (can someone clarify?)- but

  It's worse than the favorite options because it allows anyone in my contacts list to call.

  So is there an app or an easy way to do this?

  And if not, how BB and Android figure this out and not iPhone?

  We might think of the billions of dollars and great talent could not understand a work around?

  There is no app for this, but do not disturb, that's what you're looking for. It does not work exactly as you describe for the other operating system, but you have a little understanding of how it works for favorites. You can set do not disturb, and it will not have any type of notification. Another option is to prevent anything but calls Favorites, while the other would be to block all calls, but turn on repeated appeals, which would then allow a second call to the same person within 3 minutes to come through. If you do not use your Favorites list because it is too large, then you will need to use repeated calls. If it's important for you, you can return to your Favorites list to see if you could reduce the list to conform to what you want at the times Do not bother or because you want to just family, possibly teach them the capability of repeated calls.

  Back to Apple would go to http://www.apple.com/feedback and click on the box in this area.

• Call phones default location

  I've recently upgraded to the latest version (which was actually a problem in the previous version) whenever I use the "phone calls" and tried to enter a number that I have to use "+ 1"before each number." Otherwise, he's trying to pull up a different country. How can I get the default value for the USA?

  Also another problem I'm having is one never type in the text, I use NaturallySpeaking since I disabled, after I get the typed message using the 'Next line' command, which sends the Enter key which sends it to the next line. But now, every time that I really have top message say "Press Enter." It allows to work with the previous command, but something has changed.

  Howard

  When you (for example) press the call icon, in the callbox that appears on the top left there is a dropdownbox country, this changes the country you want to be default.

  The comand to jump a line in Skype is shift + enter (aka the next line) will enter your message, and I guess that's your problem, I can not answer for why this has changed, but you could work around him create an order custom that shift + enter (no idea if this is possible, however).

  Or you can revedrt to the previous version:

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

  Don't forget to go to tools > options > adanced > automatic updates and turn off if you do not want to run the latest version.

  The above description is for Skype in compact/shared mode, the default value may be slightly different.

• Motorcycle G2 speaker during the call phone number

  My Motorola 2nd Generation (XT1068) Mobile running the Indian version of Lollipop 5.0.1 is facing problems after removing the helmet. While I can speak using the microphone of the headset and the phone's microphone has no problem and the other person can hear what I'm talking about. But I couldn't hear the voice of the other person the listener or speaker mode. If I press the speaker, the speaker icon appears in the notification bar, but I can't hear a thing. So whenever I have to use headphones to hear the voice of the other person and its boring.

  I deleted the cache and data using app but DIN can't Dialer. The only temporary solution that works is to restart the phone. After restarting the phone, the headset works fine and I am able to speak and hear properly. But again, if I insert and remove the headphones to listen to music the listener stop working and I couldn't hear the other voice of people on a phone call. I also tried to insert the other helmets. I also tried remove headphones slowly helping din't either.

  I thought that the phone was still in the "combined" mode, but if I play song or a video of the Gallery/Media player or Google playing music or by the two speakers apps file manager in front work very well. And if I take off the helmet, the songs play in breaks of play music which means that there is no problem in the helmet and decision-making.

  Any ideas on how to solve this problem? This could be a hardware or a software problem?

  Factory reset solved my problem.

• Received a call phone an engineer of windows, is it a scam?

  someone had a phone call from an engineer windows saying: I sent an error report and he could help. I am as much as to run the EVENTWVR then errors have shown then he type in MMCFIG I did then a web site WWW.AMMYY.COM says I typed it and came to a website he said free press down load now I don't have that I think it is strange that he was an engineer .i windows hung up, I hope that I stopped in time. anyone else just live it and do windows ring you

  someone had a phone call from an engineer windows saying: I sent an error report and he could help. I am as much as to run the EVENTWVR then errors have shown then he type in MMCFIG I did then a web site WWW.AMMYY.COM says I typed it and came to a website he said free press down load now I don't have that I think it is strange that he was an engineer .i windows hung up, I hope that I stopped in time. anyone else just live it and do windows ring you

  He is a crook. %T his is become a very common scam these days. Make sure it is rigid roof, but it would seem that you have stopped in time. You didn't give him any access to the computer, did you?

• someone contacted me by phone, hacker who claims to be from MS, is it real or a?

  He said tp be from microsoft calling for help with computer problems. I have not reached out for help and do not know how he got my phone number or knew I had questions

  Hello

  It's a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Call phone app not called in work profile

  A duplicate of this http://supportforums.blackberry.com/t5/Cascades-Development/Invoking-a-Phone-call-in-Work-Profile-ap...

  In my application I have managed to make a phone call to a number using the native c ++ api in the profile phone as below:
  BB::System: Phone:hone telephone;
  phone.initiateCellularCall("519-555-0100");
  or by using the context of the invocation.

  Enforcement I do should be used in the profile of work all the other features work as in compose email but phone app does not get invoked in the job profile, he works on the personal profile of the phone.

  Do I need special permissions on the side of BES server or something, since it is deployed on the BES Server?

  Hello

  With the delimitation of the staff and work of perimeters in BlackBerry 10 applications will be referred to as 'personal' applications and be inaccessible from the perimeter of the company; one such application is the phone. Therefore impossible to initiate calls from the perimeter of work using the configurations currently provided in BlackBerry 10 today.

• Inbound/outbound call phone number, phone logging listener?

  Yes. There is that a phone of object exists, there is an onCallUpdated signal. But how to retrieve the phone number?

  Another question - in BBOS has been object of PhoneLogListener. I can't find an alternative to new BB10. How to access phone log?

  You can access the sender of a signal by calling sender(), in your case it would be the class phone I guess.

• Call; Phone number to text or call

  When you click on the button, I want to give the user an option, what to do with this phone number: call or send a text message

  Button {
      text: "Call"
      id: phoneNumber
      onClicked: {
          invoke.trigger("bb.action.OPEN")
      }
  }
  
  attachedObjects: [
      Invocation {
          id: invoke
          query {
              mimeType: "text/plain"
              data: "+38640111222"
          }
      }
  ]
  

  I don't know what mimeType should be for this action, and if I went completely the wrong way.

  Also as an easy way to achieve this:

  In your appUI.cpp / hand, include:

  #include 
  #include 
  

  You must add the LIBS +=-lbbdata to the. File Pro.

  Add these lines to register to the system.phone and access it from QML:

      qmlRegisterType("bb.system.phone", 1, 0, "Phone");
      DataSource::registerQmlTypes();
  

  Then in the QML file:

  import bb.cascades 1.0
  import bb.system.phone 1.0
  
  Page {
      Container {
          horizontalAlignment: HorizontalAlignment.Fill
          verticalAlignment: VerticalAlignment.Fill
          Button {
              text: "Call Me!!"
              onClicked: {
                  phone.initiateCellularCall("0038640111222");
              }
          }
      }
      attachedObjects: [
          Phone {
              id: phone
          }
      ]
  }
  

• Call phone recieve of India saying yesterday in support of MS Windows

  Phone call from India yesterday claiming MS Windows support and reports to me that all Windows systems had problems in the past 3 days. They reported that the mistakes of my laptop has triggered the call of MS Windows support. I asked that they send me an email with their telephone numbers but have not received. My question is that you have taken care of Windows based in India Call Center? The quality of the listed calls he was probably based in India, but I had a lot of trouble to understand what they wanted and why they called me as I na not request a call. Suspected of it was an attempt to gain access to my PC, but not bite and thought that someone should be aware of this. Background noise resembled a call centre and distortion call sounded as if it was an overseas call.
  The Tech said the mistakes my laptop is doing a report for MS is the reason why they wanted and I wanted to give them the error codes that I saw. I don't know how they got my number, but I knew they were not legitimate request an email on their part. Now I'm afraid I'll get an email for viruses that I gave them my eamil address...

  SCAM!

  see this:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/please-read-Don

• BlackBerry Smartphones have to stop entry of password required before calling, phone was used by my niece in big corp.

  This phone has been used by my niece who has worked for a large corp.  She bought the phone, is no longer with the corp, has improved his and this handed down to me.  I was not able to stop the requirement of entry password for each outgoing call.  This could be something the dept Corp IT implemented and must delete for me.  Verizon to Denver centres have not been able to resolve this matter and suggested that I come back on my niece's body worked for.

  Thanks in advance for any help.

  MurphyBlack

  Hi and welcome to the forums!

  You probably have a policy in place.

  Go to your the PARAMETERS of SECURITY/OPTIONS/GENERAL scroll down and see if there is a red lock

  or make reference to policies. Your best bet is to deal with the company, the phone was with and make them

  Send a black policy.

  Thank you

  Bifocals,

  Don't forget to adjust your thread.

  Put the check mark in the green box containing your answer! Thank you

• BlackBerry Smartphones 'Address book call' phone function

  I installed the software at 4.5.0.110.  In the phone function when I put the cursor in the empty field where a number is to be entered and I click on the trackball, a small window at the bottom of the screen appears that says "menu".  When I click again, appears the full menu and a selection is "Call address book."  When I select this function, the list of address book and I can then select the person and the number to call.  My question is this: in the old software, when I put the cursor in the empty field where a number is to be entered and I clicked on the trackball, the message "Address book call" instantly appeared.  I have not had to go through the extra click to see the full menu, then click again to access the address book.  Is there a setting in this new software to go directly to the "address book call" when the curson is in the field "Enter number" and I click? Thanks for anyone's help.

  Go to Options > keyboard/screen.

  Scroll to Menu/Menu Style option and set it to FULL menu.