Camelio S10 of load

Similar Questions

• Camelio S10 HD video playback problem

  I looked at all the other issues first, honest! I purchesed my shiny new camelio S10 and it works perfectly, bar when I try to play videos filmed in HD on my pc. Ive tried the following alternatives

  1 not hd, version 4 star, works very well
  2 playback on the real camera is perfect for hd and non hd
  3 ive tried using the supplied software, quicktime and one other player called dirx
  4 ive tried all above on another computer

  None solves the problem of the HD video being dried after about 4 seconds, regardless of the size of the file, and then it just jams and plays the odd field, which remains frozen on screen HD perfect but used to move

  Any help would be really appreciated.

  anyone any clues at all to this? would be really helpful, thank you

• Tecra S10 - e-SATA with WD MyBook problem

  I have Tecra S10-10 loaded with win 7/32 final. From the beginning, there is fixation e-sata WD MyBook problem - most of the time cannot be reached
  and Device Manager hangs up refreshing devices. Only restart after sometimes he can be attached, but only those by boot allows. All other devices works fine. Before win 7
  I worked with XP no problem also.

  I tried to update the drivers for the chipset for win 7 - but it failed with the message that this computer does not meet the minimum requirements.
  The BIOS is 2.0. Trying to upgrade the BIOS to 3.0, he replied that Intel TXT must be disabled, but it is set in the BIOS, option cannot be selected.

  No idea how to fix e-sata?

  Hi Damir

  As I see that you do have a general problem with e-SATA, but just when you want to use this device to some so I think that the solution is not so easy.
  This device is not known to me, but I suppose you guessed it with USB cable. You can use it with any other standard USB port?

• Problem loading Camileo S10

  Hi all users of Toshiba!

  I just bought a camera, Camileo S10, and it seems apretty nice, small and light. But he does not seem to charge the battery, or power on. Here's how I did:

  (1) I removed the insulation of the battery and put it again, the closure case.
  (2) I plugged it with its own charger, using the USB connector.
  (3) the LED ring around the "Record" button will light up (but flashes as stated in the manual).
  (4) when 5 minutes pass, the LED turns off and never turns on again.

  Is this a normal behavior? Because when I try to turn on the camera, there simply nothing. I tried to reverse the LCD and also tried with the power button, with unplugged USB charger. Device does not react. When I turn on with charger plugged works correctly.

  Thanks for your help!

  Post edited by: m0sk4

  Hello

  The new battery is completely empty!
  Therefore, you must leave the battery connected to the power supply for a long time.

  In addition computer will not charge the battery when it is connected. You should ONLY use the provided AC charger! Camcorder must be decommissioned; flashing light confirms the load but the light is constant when the load was over!

• Tecra S10 - Does battery stops if it is full load?

  What is the Toshiba Tecra S10 stops charging the battery when it is charged?

  I mean, when the battery is charged, I have to unplug the power cord?

  Hello

  Notebooks stops charging the battery after it has been fully charged and you n t need to unplug the power adapter.
  If a battery is fully charged should turn the blue LED of the battery and the battery could be disconnected from the power supply.
  Only when you are not using your battery for weeks (a lot) and the battery charge decreases by a few percent of the self-discharge it will be recharged again at 100%.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=161456

  It s a nice and interesting discussion on this theme.

  Cheers mate

• Camileo S10 does not

  Hello

  last week, I found my old camileo s10 that I him have not used for a year or two, so I guess the battery was completely dead and unusable.

  However I found a charger that has mounted the camcorder, it may not have been that which is expected but when it is plugged into an outlet an orange light appears around the record button.

  However, after charging for two days in a row, the camcorder appears not functional even if the orange light remains constant when charging.

  If anyone can offer a solution to this problem, or is my camcorder simply dysfunctional because of the long period of unused remaining time? Thanks for any help.

  I put t see many options here

  If the battery is OK, it should be possible to load.
  The camcorder must be decommissioned: flashing light confirms the load, but the light is constant when the load was over.

  In your case, it might be possible that the battery is defective and, therefore, it of not possible to load.
  Maybe you should try the new battery

• Tecra S10 - 123 and Linux Mandriva boot problem

  I have a Tecra S10 - 123 for two months and wanted to install Mandriva on it (I have no experience with Linux...). I burn the Image on Cd image .iso file and changed the bios settings to boot from the CD-ROM. It works without problem, but Mandriva stops to boot from the Live Cd once the kernel is loaded.

  What can I do?

  Maybe it's a SATA question, have you tried to set the SATA Mode in the BIOS to "COMPATIBILITY"?

  Work the other flavors of Linux? Maybe Ubuntu will install properly.

• Tecra S10-142 - how to fix touch Assist from Toshiba?

  I have a Tecra S10-142, with Windows XP.

  The * Toshiba assist button * does not work because this utility is not loaded at startup.
  What can I do to fix it? Where can I find the drivers to install this utility?

  Thank you

  Hello

  I agree with the user above. You must install or reinstall Toshiba Assist, which can be downloaded from the Toshiba page.

  The installation should be performed in a few clicks only, and maybe you have to restart the laptop. After that, it should work.
  Can you confirm this?

• Some problems after the downgrade from Vista to XP - Tecra S10

  Hello

  I wonder if you could give me a helping hand with a laptop I bought recently.

  With the S10, I got a downgrade and used to downgrade to XP SP3 cd, but who has a problem.
  Sometimes when I restarted the pc, or even when it would boot it would hang and the fan would start to run at 100%.
  When it restarts, it crashes just after the "closing windows" and when it starts, it freezes at the windows xp loading screen.

  The only thing I could do, it's hard to restart it.
  If you think "huh, he had a few pilot program or that ' Yes, thought that myself, but I reinstalled xp on the machine with fresh drivers, bios update, file verification, toshiba software uninstalled, reinstalled, checked for viruses malware... always dose the same thing.

  The interesting part is that it is not all the time... and I can't understand what is happening when the system crashes.

  Can someone give me a hand with this?

  Hello

  It is possible that some pre-installed applications that worked correctly with Vista OS would go well with Win XP and so these strange questions would appear

  As another user suggested try to uninstall the software of fingerprint. But the best solution would be the clean OS install

  However check this

• Camileo S10 - SD or SDHC cards

  Hello

  Camileo S10 is compatible with SDHC cards or SD?
  If it's compatible, what class of SDHC should I buy and which is the maximum it can handle (16 or 32 GB?).

  If not, which is the maximum capacity of the SD card, it can handle (maybe 8 GB?)?
  Thank you

  Hello

  I do not have S10 but I know that H10 supports SD cards up to 8 GB and supports SDHC cards (Secure Digital high capacity) but I did not test it.
  It must be the same on your Camelio.

• Camileo load problem (solved) and a general question!

  Hi all!

  First of all, I was going to ask for help as to why the Camileo S10 wasn't supported (the orange light was not blinking) and I had seen a few people with similar problems.
  The solution?

  Give the contacts of the battery clean.
  The sticker of insulation that comes on it must leave some kind of residue on it, and just avoid the charges. [Now it blinks far fortunately:]

  So my general question was, is it possible/desirable to use the camera on the network?
  Instead of constantly drain and recharge the battery during long shoots, I prefer to leave it plugged!

  Thank you very much in advance!

  Paul

  Hello

  I think that the handling of the battery is always the same, regardless of what product it is
  From time to time the battery must be recalibrated.

  This means that the battery should be completely discharged and then after you need to load it again until the battery could reach 100%

  I do this with all my batteries; laptop battery, laptop battery and battery of digi cam.

• Cannot store basic Camileo S10 and P30 configurations

  Hello, first post for me. I got a Camileo S10 and changed with a Camileo P30, and on the two camera, I can't record some basic configurations. I have to put every time that use of the camera. By example, if I activate the stabilizer in 720 p, at a filming of a video, as someone close to the camera, 5 min later I have to ashoot another video, I always have to go into the settings and re-setup stabilizing, because this setting are not stored, while the 720 p stay stored configuration. Same thing for the photo shoot, where of the light conditions and so on must be set each time. It's very annoying, and I can't ask my son to not to move to get a picture, if everytime I open the camera I have to redo the configurations... I'm doing something wrong here? Is there a way to save configurations, as in most normal and camcorder camera?

  Thank you very much

  Lillo

  Hello

  I contacted my friend because he has the same cam. I ve asked him to check this.

  He told me that this stabilization can be used in HD recording and it can be used by the registration with a lower resolution only.
  Another thing:
  Did you put the battery inside and full load?
  What's with the time and data? Is always shown the right one?

• Please help with the problem of driver SAS S10 6483

  I'm going crazy and I hope someone here can help.

  I am trying to load Windows 7 on a 6483 S10 which has a SAS hard drive.

  During installation, the system does not see the drive and ask for a driver.

  I can't find a SAS driver for windos 7 anywhere.

  Can someone help me understand this?

  Thank you!

  Bill

  Thanks, Erik

  It turns out that when I opened the box, it doesn't have a SAS drive, as I said.

  She and its a SATA drive or the computer is defective. IF its of not coming back.

  I was also told that Windows 7 will not work with it that seems hard to believe.

  I was led on a chase of wild goose by the seller.

  Thanks for your help.

• S10 idea Pad constant suspended

  HI there at - there anyone who can help?

  I really hope you can help me with some problems I encounter when using the S10.

  The problems encountered are:

  (1) recently the lappy will hang aftr start windows, the mouse doesn't even pressing Cnrt Alt Delete. I'll need to force the closure of the lappy...

  (2) but the lappy works well when there is no internet connection, I suspect that the lappy hung while auto connect to available network connection.

  (3) I have also crossed the system event log and there are errors in the search for a DHCP, DCOM service and ipod.  m going to uninstall Itunes because I heard that itunes will crash the system (is this true?).

  It will be much appreciated if you could help me because I think that this is not a very big problem to send it for repair...

  Hi Bren and welcome,

  If Windows hangs or strange behavior, I usually work in the following order:

  1 let Windows check disk (chkdsk) and fix the errors, if any.

  2 be sure that Windows is updated.

  2. let an online virus scanner to check everything.

  If this does not resolve the problem:

  4. save the files important network or external drive.

  5. restoration of the computer of the last reliable recognized Acronis image backup.

  Maybe it's time to save important files and do a factory restore of Windows?

  iTunes and QuickTime is putting a lot of load on any little netbook, especially if you have a large music library and sync podcasts and videos - install only if you need it, just like any other app. iTunes worked flawlessly when I tested a few months before.

  --

  Hans

• S10 restore (seemed) Messup - Help!

  Hello. Well, today I decided to restore my netbook s10 (new start). But because it was a netbook, I didn't know how to go on this issue. So, I had looked on the web how to the s10 netbook. I now recently a reader of cd for the netbook, but also a copy of Windows XP (sp3) cd fresh got a little while ago. An post said I could from a CD of win to restore the computer, but be careful not to delete the hidden for a restore key partition. I also was making sure to not get deleted for this netbook from Lenovo-ware features.

  But instead of reinstalling Windows xp again, I selected to repair windows. So, after that has been done. Windows was loading, but then shortly after the netbook is off! (Do not know if this may have had an effect on installation) He needed be properly charged or plugged.  So, after plugging, I turned on the s10 netbook. He loaded as usual with the startup Lenovo & Quicklaunch splash screen (Lenovo-ware still tac). Then loaded windows xp. Then shown face Veri (work). So then I logged in username identical to before.

  Then as he was charge my user (not yet shown office) account, a notification came to ask me to sign, I had to activate Windows. Yes or no. Then, I selected Yes. Desktop was loading. Then nothing. The only thing was the mouse & background. No other load. I waited ten minutes or more. Some functions now did not work (i.e.. Right click, click, key Start Menu, ctrl + r, etc.). The mouse can move.

  So, now my question is, what can I do? How can this be repaired? Should I actually install Windows XP SP3 (not repair)? Please help . Thank you & God bless .

  Note: At the time this was written, I did outside the OS, Quicklaunch Splashtop.

  Hey, all the . Thank you for your help. I solved it myself & with prayer. I realize that when I put in the product key for Windows, I confused with only 1 letter in the code! But then I went back to the Windows installation, this sweet time on the new partition installation (C: deleted, kept the hidden partition). So after doing this the boot always has the startup Lenovo screen, but has not loaded Quick Start. Then loaded Windows & resembled an office of first ordinary Windows (without certain features of netbook Lenovo s10). So, I got the drivers & them installed on it. Then I got my other media-ware programs. Now it works like before, except better & faster (I don't have the stuff that I didn't need that came preinstalled & drivers I do not use or need) . Take care & God bless .

  (... This message thread may be closed...)